! Started logfile: J1648+4104_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:32:12 2017 obs J1648+4104_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J1648+4104_S_2014_01_04_pus_uva.fits ! AN table 1: 76 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.430556 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1648+4104 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 4712 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1648+4104_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 228 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 228 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 228 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 228 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.840706Jy sigma=0.013505 ! Fit after self-cal, rms=0.829977Jy sigma=0.013294 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.9 mas, bmaj=9.218 mas, bpa=29.73 degrees ! Estimated noise=1263.68 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.12674 Jy ! Component: 100 - total flux cleaned = 0.155832 Jy ! Total flux subtracted in 100 components = 0.155832 Jy ! Clean residual min=-0.007362 max=0.010450 Jy/beam ! Clean residual mean=0.000024 rms=0.002170 Jy/beam ! Combined flux in latest and established models = 0.155832 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.155832 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071409Jy sigma=0.000982 ! Fit after self-cal, rms=0.071407Jy sigma=0.000982 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.778 mas, bmaj=9.466 mas, bpa=28.41 degrees ! Estimated noise=683.021 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0147098 Jy ! Component: 100 - total flux cleaned = 0.0226694 Jy ! Component: 150 - total flux cleaned = 0.0282225 Jy ! Component: 200 - total flux cleaned = 0.0323075 Jy ! Total flux subtracted in 200 components = 0.0323075 Jy ! Clean residual min=-0.005167 max=0.006549 Jy/beam ! Clean residual mean=0.000030 rms=0.001564 Jy/beam ! Combined flux in latest and established models = 0.188139 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 45 components and 0.188139 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067147Jy sigma=0.000941 ! Fit after self-cal, rms=0.067048Jy sigma=0.000941 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00* KP 1.00* LA 0.99 ! MK 0.97 NL 0.96 OV 0.97 PT 1.01 ! SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.00* KP 1.00* LA 1.00 ! MK 0.99 NL 1.01 OV 0.99 PT 0.99 ! SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00* KP 1.00* LA 0.82 ! MK 0.99 NL 0.99 OV 0.91 PT 0.95 ! SC 1.07 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 1.00* KP 1.00* LA 0.85 ! MK 1.01 NL 1.06 OV 1.00 PT 0.97 ! SC 0.95 ! ! ! Fit before self-cal, rms=0.067048Jy sigma=0.000941 ! Fit after self-cal, rms=0.062151Jy sigma=0.000897 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.794 mas, bmaj=9.606 mas, bpa=28.13 degrees ! Estimated noise=677.485 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-8.5, 2.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00417572 Jy ! Component: 100 - total flux cleaned = 0.00474269 Jy ! Component: 150 - total flux cleaned = 0.00468139 Jy ! Component: 200 - total flux cleaned = 0.00478838 Jy ! Total flux subtracted in 200 components = 0.00478838 Jy ! Clean residual min=-0.002156 max=0.002115 Jy/beam ! Clean residual mean=-0.000005 rms=0.000519 Jy/beam ! Combined flux in latest and established models = 0.192927 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 68 components and 0.192927 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061784Jy sigma=0.000892 ! Fit after self-cal, rms=0.061524Jy sigma=0.000891 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061524Jy sigma=0.000891 ! Fit after self-cal, rms=0.061463Jy sigma=0.000890 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.796 mas, bmaj=9.593 mas, bpa=28.19 degrees ! Estimated noise=677.419 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000478215 Jy ! Component: 100 - total flux cleaned = 0.000697718 Jy ! Component: 150 - total flux cleaned = 0.000882119 Jy ! Component: 200 - total flux cleaned = 0.00106838 Jy ! Total flux subtracted in 200 components = 0.00106838 Jy ! Clean residual min=-0.001621 max=0.001734 Jy/beam ! Clean residual mean=-0.000001 rms=0.000419 Jy/beam ! Combined flux in latest and established models = 0.193996 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 90 components and 0.193996 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061420Jy sigma=0.000890 ! Fit after self-cal, rms=0.061423Jy sigma=0.000890 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000207733 Jy ! Component: 100 - total flux cleaned = 0.000344307 Jy ! Component: 150 - total flux cleaned = 0.000467993 Jy ! Component: 200 - total flux cleaned = 0.000582639 Jy ! Total flux subtracted in 200 components = 0.000582639 Jy ! Clean residual min=-0.001552 max=0.001708 Jy/beam ! Clean residual mean=-0.000002 rms=0.000405 Jy/beam ! Combined flux in latest and established models = 0.194578 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 103 components and 0.194578 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061405Jy sigma=0.000889 ! Fit after self-cal, rms=0.061409Jy sigma=0.000889 ! Inverting map ! Added new window around map position (12.5, -83.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00148545 Jy ! Component: 100 - total flux cleaned = 0.00221997 Jy ! Component: 150 - total flux cleaned = 0.00241188 Jy ! Component: 200 - total flux cleaned = 0.00254595 Jy ! Total flux subtracted in 200 components = 0.00254595 Jy ! Clean residual min=-0.001421 max=0.001425 Jy/beam ! Clean residual mean=-0.000001 rms=0.000344 Jy/beam ! Combined flux in latest and established models = 0.197124 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 124 components and 0.197124 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061344Jy sigma=0.000889 ! Fit after self-cal, rms=0.061346Jy sigma=0.000889 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061346Jy sigma=0.000889 ! Fit after self-cal, rms=0.061411Jy sigma=0.000889 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.801 mas, bmaj=9.587 mas, bpa=28.17 degrees ! Estimated noise=677.622 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000368108 Jy ! Component: 100 - total flux cleaned = 0.000551393 Jy ! Component: 150 - total flux cleaned = 0.00071849 Jy ! Component: 200 - total flux cleaned = 0.000851585 Jy ! Total flux subtracted in 200 components = 0.000851585 Jy ! Clean residual min=-0.001340 max=0.001322 Jy/beam ! Clean residual mean=-0.000000 rms=0.000318 Jy/beam ! Combined flux in latest and established models = 0.197976 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 132 components and 0.197976 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061388Jy sigma=0.000888 ! Fit after self-cal, rms=0.061390Jy sigma=0.000888 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000226604 Jy ! Component: 100 - total flux cleaned = 0.000348502 Jy ! Component: 150 - total flux cleaned = 0.00048294 Jy ! Component: 200 - total flux cleaned = 0.000537571 Jy ! Total flux subtracted in 200 components = 0.000537571 Jy ! Clean residual min=-0.001294 max=0.001258 Jy/beam ! Clean residual mean=0.000000 rms=0.000308 Jy/beam ! Combined flux in latest and established models = 0.198513 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 140 components and 0.198513 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061376Jy sigma=0.000888 ! Fit after self-cal, rms=0.061377Jy sigma=0.000888 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061377Jy sigma=0.000888 ! Fit after self-cal, rms=0.061398Jy sigma=0.000888 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.07 mas, bmaj=10.48 mas, bpa=29.12 degrees ! Estimated noise=754.433 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000187026 Jy ! Component: 100 - total flux cleaned = 0.000284215 Jy ! Component: 150 - total flux cleaned = 0.000353971 Jy ! Component: 200 - total flux cleaned = 0.000423554 Jy ! Total flux subtracted in 200 components = 0.000423554 Jy ! Clean residual min=-0.001237 max=0.001103 Jy/beam ! Clean residual mean=0.000001 rms=0.000289 Jy/beam ! Combined flux in latest and established models = 0.198937 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 158 components and 0.198937 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061394Jy sigma=0.000888 ! Fit after self-cal, rms=0.061396Jy sigma=0.000888 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000148473 Jy ! Component: 100 - total flux cleaned = 0.000211402 Jy ! Component: 150 - total flux cleaned = 0.000292712 Jy ! Component: 200 - total flux cleaned = 0.000329879 Jy ! Total flux subtracted in 200 components = 0.000329879 Jy ! Clean residual min=-0.001201 max=0.001064 Jy/beam ! Clean residual mean=0.000002 rms=0.000281 Jy/beam ! Combined flux in latest and established models = 0.199267 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 170 components and 0.199267 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061395Jy sigma=0.000888 ! Fit after self-cal, rms=0.061396Jy sigma=0.000888 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.802 mas, bmaj=9.584 mas, bpa=28.16 degrees ! Estimated noise=677.839 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.802 x 9.584 at 28.16 degrees (North through East) ! Clean map min=-0.001283 max=0.16762 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.91 mas, bmaj=9.351 mas, bpa=29.44 degrees ! Estimated noise=1273.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.127688 Jy ! Component: 100 - total flux cleaned = 0.15678 Jy ! Component: 150 - total flux cleaned = 0.167361 Jy ! Component: 200 - total flux cleaned = 0.173357 Jy ! Total flux subtracted in 200 components = 0.173357 Jy ! Clean residual min=-0.003815 max=0.004545 Jy/beam ! Clean residual mean=0.000009 rms=0.001024 Jy/beam ! Combined flux in latest and established models = 0.173357 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.173357 Jy ! Inverting map and beam ! Estimated beam: bmin=3.802 mas, bmaj=9.584 mas, bpa=28.16 degrees ! Estimated noise=677.839 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00538637 Jy ! Component: 100 - total flux cleaned = 0.00891949 Jy ! Component: 150 - total flux cleaned = 0.0115534 Jy ! Component: 200 - total flux cleaned = 0.0137462 Jy ! Total flux subtracted in 200 components = 0.0137462 Jy ! Clean residual min=-0.002158 max=0.001960 Jy/beam ! Clean residual mean=0.000009 rms=0.000566 Jy/beam ! Combined flux in latest and established models = 0.187103 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 58 components and 0.187103 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.07 mas, bmaj=10.48 mas, bpa=29.12 degrees ! Estimated noise=754.433 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0024086 Jy ! Component: 100 - total flux cleaned = 0.00413921 Jy ! Component: 150 - total flux cleaned = 0.00553284 Jy ! Component: 200 - total flux cleaned = 0.00656987 Jy ! Total flux subtracted in 200 components = 0.00656987 Jy ! Clean residual min=-0.001604 max=0.001363 Jy/beam ! Clean residual mean=0.000006 rms=0.000430 Jy/beam ! Combined flux in latest and established models = 0.193673 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000765113 Jy ! Component: 100 - total flux cleaned = 0.00139226 Jy ! Component: 150 - total flux cleaned = 0.00196721 Jy ! Component: 200 - total flux cleaned = 0.00246829 Jy ! Total flux subtracted in 200 components = 0.00246829 Jy ! Clean residual min=-0.001315 max=0.001027 Jy/beam ! Clean residual mean=0.000004 rms=0.000338 Jy/beam ! Combined flux in latest and established models = 0.196142 Jy ! Adding 92 model components to the UV plane model. ! The established model now contains 145 components and 0.196142 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.802 mas, bmaj=9.584 mas, bpa=28.16 degrees ! Estimated noise=677.839 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000209409 Jy ! Component: 100 - total flux cleaned = 0.00029271 Jy ! Component: 150 - total flux cleaned = 0.000366232 Jy ! Component: 200 - total flux cleaned = 0.000537208 Jy ! Total flux subtracted in 200 components = 0.000537208 Jy ! Clean residual min=-0.001349 max=0.001484 Jy/beam ! Clean residual mean=0.000003 rms=0.000341 Jy/beam ! Combined flux in latest and established models = 0.196679 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 166 components and 0.196679 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061475Jy sigma=0.000889 ! Fit after self-cal, rms=0.061479Jy sigma=0.000889 wmodel J1648+4104_S_2014_01_04_pus_map.mod ! Writing 166 model components to file: J1648+4104_S_2014_01_04_pus_map.mod wobs J1648+4104_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J1648+4104_S_2014_01_04_pus_uvs.fits wwins J1648+4104_S_2014_01_04_pus_map.win ! wwins: Wrote 3 windows to J1648+4104_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000134912 Jy ! Component: 100 - total flux cleaned = 4.63526e-05 Jy ! Component: 150 - total flux cleaned = -1.59803e-05 Jy ! Component: 200 - total flux cleaned = -7.5584e-05 Jy ! Component: 250 - total flux cleaned = -0.00011404 Jy ! Component: 300 - total flux cleaned = -0.000131694 Jy ! Component: 350 - total flux cleaned = -0.000202753 Jy ! Component: 400 - total flux cleaned = -0.000220313 Jy ! Component: 450 - total flux cleaned = -0.00027158 Jy ! Component: 500 - total flux cleaned = -0.00032152 Jy ! Component: 550 - total flux cleaned = -0.000402303 Jy ! Component: 600 - total flux cleaned = -0.000465333 Jy ! Component: 650 - total flux cleaned = -0.000465394 Jy ! Component: 700 - total flux cleaned = -0.000465571 Jy ! Component: 750 - total flux cleaned = -0.000495079 Jy ! Component: 800 - total flux cleaned = -0.000466414 Jy ! Component: 850 - total flux cleaned = -0.000466622 Jy ! Component: 900 - total flux cleaned = -0.000452158 Jy ! Component: 950 - total flux cleaned = -0.000451983 Jy ! Component: 1000 - total flux cleaned = -0.000411049 Jy ! Component: 1050 - total flux cleaned = -0.000397966 Jy ! Component: 1100 - total flux cleaned = -0.000384936 Jy ! Component: 1150 - total flux cleaned = -0.000411031 Jy ! Component: 1200 - total flux cleaned = -0.000385369 Jy ! Component: 1250 - total flux cleaned = -0.000385407 Jy ! Component: 1300 - total flux cleaned = -0.000360574 Jy ! Component: 1350 - total flux cleaned = -0.000360603 Jy ! Component: 1400 - total flux cleaned = -0.000312206 Jy ! Component: 1450 - total flux cleaned = -0.000252659 Jy ! Component: 1500 - total flux cleaned = -0.000217316 Jy ! Component: 1550 - total flux cleaned = -0.000194065 Jy ! Component: 1600 - total flux cleaned = -0.000171047 Jy ! Component: 1650 - total flux cleaned = -7.99276e-05 Jy ! Component: 1700 - total flux cleaned = -3.48764e-05 Jy ! Component: 1750 - total flux cleaned = -1.26636e-05 Jy ! Component: 1800 - total flux cleaned = 4.26545e-05 Jy ! Component: 1850 - total flux cleaned = 7.54982e-05 Jy ! Component: 1900 - total flux cleaned = 0.000140497 Jy ! Component: 1950 - total flux cleaned = 0.000172693 Jy ! Component: 2000 - total flux cleaned = 0.000204727 Jy ! Component: 2050 - total flux cleaned = 0.000257636 Jy ! Component: 2100 - total flux cleaned = 0.00027852 Jy ! Component: 2150 - total flux cleaned = 0.000371672 Jy ! Component: 2200 - total flux cleaned = 0.000402377 Jy ! Component: 2250 - total flux cleaned = 0.000483604 Jy ! Component: 2300 - total flux cleaned = 0.000523817 Jy ! Component: 2350 - total flux cleaned = 0.000553836 Jy ! Component: 2400 - total flux cleaned = 0.000642796 Jy ! Component: 2450 - total flux cleaned = 0.000681962 Jy ! Component: 2500 - total flux cleaned = 0.000740344 Jy ! Component: 2550 - total flux cleaned = 0.000778909 Jy ! Component: 2600 - total flux cleaned = 0.000797981 Jy ! Component: 2650 - total flux cleaned = 0.000835941 Jy ! Component: 2700 - total flux cleaned = 0.000845342 Jy ! Component: 2750 - total flux cleaned = 0.000901381 Jy ! Component: 2800 - total flux cleaned = 0.000929146 Jy ! Component: 2850 - total flux cleaned = 0.000919968 Jy ! Component: 2900 - total flux cleaned = 0.000965808 Jy ! Component: 2950 - total flux cleaned = 0.000993117 Jy ! Component: 3000 - total flux cleaned = 0.00102922 Jy ! Component: 3050 - total flux cleaned = 0.00106511 Jy ! Component: 3100 - total flux cleaned = 0.00109182 Jy ! Component: 3150 - total flux cleaned = 0.0011272 Jy ! Component: 3200 - total flux cleaned = 0.00113596 Jy ! Component: 3250 - total flux cleaned = 0.00116217 Jy ! Component: 3300 - total flux cleaned = 0.00118823 Jy ! Component: 3350 - total flux cleaned = 0.00121414 Jy ! Component: 3400 - total flux cleaned = 0.00124854 Jy ! Component: 3450 - total flux cleaned = 0.00125707 Jy ! Component: 3500 - total flux cleaned = 0.00130808 Jy ! Component: 3550 - total flux cleaned = 0.00134195 Jy ! Component: 3600 - total flux cleaned = 0.00137562 Jy ! Component: 3650 - total flux cleaned = 0.00138404 Jy ! Component: 3700 - total flux cleaned = 0.0014341 Jy ! Component: 3750 - total flux cleaned = 0.00147567 Jy ! Component: 3800 - total flux cleaned = 0.00149217 Jy ! Component: 3850 - total flux cleaned = 0.00154153 Jy ! Component: 3900 - total flux cleaned = 0.00156606 Jy ! Component: 3950 - total flux cleaned = 0.00160693 Jy ! Component: 4000 - total flux cleaned = 0.0016395 Jy ! Component: 4050 - total flux cleaned = 0.0016476 Jy ! Total flux subtracted in 4096 components = 0.00167184 Jy ! Clean residual min=-0.000583 max=0.000479 Jy/beam ! Clean residual mean=0.000000 rms=0.000140 Jy/beam ! Combined flux in latest and established models = 0.198351 Jy keep ! Adding 238 model components to the UV plane model. ! The established model now contains 404 components and 0.198351 Jy ![Exited script file: muppet] wmap "J1648+4104_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.802 x 9.584 at 28.16 degrees (North through East) ! Clean map min=-0.0010599 max=0.16804 Jy/beam ! Writing clean map to FITS file: J1648+4104_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.168041 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000141551 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.252708 0.252708 0.505415 1.01083 2.02166 4.04332 8.08664 16.1733 32.3466 64.6931 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.168 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.802 x 9.584 at 28.16 degrees (North through East) ! Clean map min=-0.0010599 max=0.16804 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1648+4104_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:32:17 2017