! Started logfile: J1647+4950_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:32:07 2017 obs J1647+4950_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J1647+4950_S_2014_01_04_pus_uva.fits ! AN table 1: 98 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.430556 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1647+4950 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 6076 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1647+4950_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 294 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 294 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 294 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 294 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.933336Jy sigma=0.014710 ! Fit after self-cal, rms=0.911944Jy sigma=0.014382 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.837 mas, bmaj=10.16 mas, bpa=30.73 degrees ! Estimated noise=1019.89 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0675314 Jy ! Component: 100 - total flux cleaned = 0.0836097 Jy ! Total flux subtracted in 100 components = 0.0836097 Jy ! Clean residual min=-0.004910 max=0.006701 Jy/beam ! Clean residual mean=0.000011 rms=0.001537 Jy/beam ! Combined flux in latest and established models = 0.0836097 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0836097 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067455Jy sigma=0.000935 ! Fit after self-cal, rms=0.067489Jy sigma=0.000935 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.719 mas, bmaj=9.915 mas, bpa=32.11 degrees ! Estimated noise=604.818 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0101467 Jy ! Component: 100 - total flux cleaned = 0.0154512 Jy ! Component: 150 - total flux cleaned = 0.0188323 Jy ! Component: 200 - total flux cleaned = 0.0211163 Jy ! Total flux subtracted in 200 components = 0.0211163 Jy ! Clean residual min=-0.002960 max=0.003070 Jy/beam ! Clean residual mean=-0.000001 rms=0.000802 Jy/beam ! Combined flux in latest and established models = 0.104726 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 45 components and 0.104726 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065828Jy sigma=0.000912 ! Fit after self-cal, rms=0.065800Jy sigma=0.000911 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00* KP 1.00* LA 1.03 ! MK 1.09 NL 0.94 OV 0.94 PT 1.02 ! SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00* KP 1.00* LA 1.01 ! MK 0.97 NL 1.04 OV 0.97 PT 1.04 ! SC 1.11 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.00* KP 1.00* LA 0.81 ! MK 1.00 NL 1.01 OV 0.92 PT 0.96 ! SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.00* KP 1.00* LA 0.90 ! MK 1.04 NL 1.09 OV 1.01 PT 0.99 ! SC 0.94 ! ! ! Fit before self-cal, rms=0.065800Jy sigma=0.000911 ! Fit after self-cal, rms=0.063865Jy sigma=0.000898 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.754 mas, bmaj=10.01 mas, bpa=32.15 degrees ! Estimated noise=599 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000299153 Jy ! Component: 100 - total flux cleaned = 3.80836e-05 Jy ! Component: 150 - total flux cleaned = -0.000185505 Jy ! Component: 200 - total flux cleaned = -0.000254392 Jy ! Total flux subtracted in 200 components = -0.000254392 Jy ! Clean residual min=-0.001889 max=0.001856 Jy/beam ! Clean residual mean=-0.000012 rms=0.000517 Jy/beam ! Combined flux in latest and established models = 0.104472 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 62 components and 0.104472 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063824Jy sigma=0.000897 ! Fit after self-cal, rms=0.063672Jy sigma=0.000896 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063672Jy sigma=0.000896 ! Fit after self-cal, rms=0.063691Jy sigma=0.000895 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.761 mas, bmaj=10.01 mas, bpa=32.14 degrees ! Estimated noise=598.518 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000130154 Jy ! Component: 100 - total flux cleaned = -8.46657e-05 Jy ! Component: 150 - total flux cleaned = -6.75446e-05 Jy ! Component: 200 - total flux cleaned = -5.24397e-05 Jy ! Total flux subtracted in 200 components = -5.24397e-05 Jy ! Clean residual min=-0.001658 max=0.001815 Jy/beam ! Clean residual mean=-0.000006 rms=0.000457 Jy/beam ! Combined flux in latest and established models = 0.104419 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 73 components and 0.104419 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063671Jy sigma=0.000895 ! Fit after self-cal, rms=0.063673Jy sigma=0.000895 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.41349e-05 Jy ! Component: 100 - total flux cleaned = -9.37348e-05 Jy ! Component: 150 - total flux cleaned = -6.63423e-05 Jy ! Component: 200 - total flux cleaned = -6.66963e-05 Jy ! Total flux subtracted in 200 components = -6.66963e-05 Jy ! Clean residual min=-0.001567 max=0.001767 Jy/beam ! Clean residual mean=-0.000006 rms=0.000443 Jy/beam ! Combined flux in latest and established models = 0.104352 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 80 components and 0.104352 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063663Jy sigma=0.000895 ! Fit after self-cal, rms=0.063665Jy sigma=0.000895 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063665Jy sigma=0.000895 ! Fit after self-cal, rms=0.063713Jy sigma=0.000895 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.765 mas, bmaj=10 mas, bpa=32.18 degrees ! Estimated noise=598.183 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000302285 Jy ! Component: 100 - total flux cleaned = -0.000219572 Jy ! Component: 150 - total flux cleaned = -0.000229458 Jy ! Component: 200 - total flux cleaned = -0.000238376 Jy ! Total flux subtracted in 200 components = -0.000238376 Jy ! Clean residual min=-0.001509 max=0.001751 Jy/beam ! Clean residual mean=-0.000005 rms=0.000433 Jy/beam ! Combined flux in latest and established models = 0.104114 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 89 components and 0.104114 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063706Jy sigma=0.000895 ! Fit after self-cal, rms=0.063712Jy sigma=0.000895 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.93162e-05 Jy ! Component: 100 - total flux cleaned = -1.77422e-05 Jy ! Component: 150 - total flux cleaned = -3.33101e-05 Jy ! Component: 200 - total flux cleaned = -4.02585e-05 Jy ! Total flux subtracted in 200 components = -4.02585e-05 Jy ! Clean residual min=-0.001495 max=0.001739 Jy/beam ! Clean residual mean=-0.000005 rms=0.000428 Jy/beam ! Combined flux in latest and established models = 0.104074 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 95 components and 0.104074 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063707Jy sigma=0.000894 ! Fit after self-cal, rms=0.063711Jy sigma=0.000894 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063711Jy sigma=0.000894 ! Fit after self-cal, rms=0.063733Jy sigma=0.000894 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.035 mas, bmaj=10.36 mas, bpa=36.42 degrees ! Estimated noise=659.206 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000232709 Jy ! Component: 100 - total flux cleaned = 0.000217147 Jy ! Component: 150 - total flux cleaned = 0.000196837 Jy ! Component: 200 - total flux cleaned = 0.000196002 Jy ! Total flux subtracted in 200 components = 0.000196002 Jy ! Clean residual min=-0.001404 max=0.001773 Jy/beam ! Clean residual mean=-0.000010 rms=0.000479 Jy/beam ! Combined flux in latest and established models = 0.10427 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 103 components and 0.10427 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063733Jy sigma=0.000894 ! Fit after self-cal, rms=0.063744Jy sigma=0.000894 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.76349e-05 Jy ! Component: 100 - total flux cleaned = -4.07368e-06 Jy ! Component: 150 - total flux cleaned = -2.05279e-05 Jy ! Component: 200 - total flux cleaned = -2.56428e-05 Jy ! Total flux subtracted in 200 components = -2.56428e-05 Jy ! Clean residual min=-0.001393 max=0.001760 Jy/beam ! Clean residual mean=-0.000010 rms=0.000473 Jy/beam ! Combined flux in latest and established models = 0.104244 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 108 components and 0.104244 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063744Jy sigma=0.000894 ! Fit after self-cal, rms=0.063750Jy sigma=0.000894 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.767 mas, bmaj=9.997 mas, bpa=32.23 degrees ! Estimated noise=598.024 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.767 x 9.997 at 32.23 degrees (North through East) ! Clean map min=-0.0013796 max=0.087315 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.846 mas, bmaj=10.26 mas, bpa=30.89 degrees ! Estimated noise=1021.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0674013 Jy ! Component: 100 - total flux cleaned = 0.0838507 Jy ! Component: 150 - total flux cleaned = 0.0916709 Jy ! Component: 200 - total flux cleaned = 0.0963608 Jy ! Total flux subtracted in 200 components = 0.0963608 Jy ! Clean residual min=-0.002997 max=0.003502 Jy/beam ! Clean residual mean=0.000003 rms=0.000889 Jy/beam ! Combined flux in latest and established models = 0.0963609 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.0963609 Jy ! Inverting map and beam ! Estimated beam: bmin=3.767 mas, bmaj=9.997 mas, bpa=32.23 degrees ! Estimated noise=598.024 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00377973 Jy ! Component: 100 - total flux cleaned = 0.00597228 Jy ! Component: 150 - total flux cleaned = 0.00734629 Jy ! Component: 200 - total flux cleaned = 0.00794057 Jy ! Total flux subtracted in 200 components = 0.00794057 Jy ! Clean residual min=-0.001766 max=0.001786 Jy/beam ! Clean residual mean=-0.000005 rms=0.000458 Jy/beam ! Combined flux in latest and established models = 0.104301 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 42 components and 0.104301 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.035 mas, bmaj=10.36 mas, bpa=36.42 degrees ! Estimated noise=659.206 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000414304 Jy ! Component: 100 - total flux cleaned = 0.000596593 Jy ! Component: 150 - total flux cleaned = 0.000628426 Jy ! Component: 200 - total flux cleaned = 0.000628895 Jy ! Total flux subtracted in 200 components = 0.000628895 Jy ! Clean residual min=-0.001474 max=0.001754 Jy/beam ! Clean residual mean=-0.000012 rms=0.000478 Jy/beam ! Combined flux in latest and established models = 0.10493 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.26162e-05 Jy ! Component: 100 - total flux cleaned = -3.44328e-05 Jy ! Component: 150 - total flux cleaned = -4.42219e-05 Jy ! Component: 200 - total flux cleaned = -6.19368e-05 Jy ! Total flux subtracted in 200 components = -6.19368e-05 Jy ! Clean residual min=-0.001447 max=0.001775 Jy/beam ! Clean residual mean=-0.000011 rms=0.000472 Jy/beam ! Combined flux in latest and established models = 0.104868 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 75 components and 0.104868 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.767 mas, bmaj=9.997 mas, bpa=32.23 degrees ! Estimated noise=598.024 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000126118 Jy ! Component: 100 - total flux cleaned = -0.00012729 Jy ! Component: 150 - total flux cleaned = -0.000144946 Jy ! Component: 200 - total flux cleaned = -0.000176763 Jy ! Total flux subtracted in 200 components = -0.000176763 Jy ! Clean residual min=-0.001522 max=0.001769 Jy/beam ! Clean residual mean=-0.000006 rms=0.000424 Jy/beam ! Combined flux in latest and established models = 0.104692 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 85 components and 0.104692 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063765Jy sigma=0.000895 ! Fit after self-cal, rms=0.063747Jy sigma=0.000894 wmodel J1647+4950_S_2014_01_04_pus_map.mod ! Writing 85 model components to file: J1647+4950_S_2014_01_04_pus_map.mod wobs J1647+4950_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J1647+4950_S_2014_01_04_pus_uvs.fits wwins J1647+4950_S_2014_01_04_pus_map.win ! wwins: Wrote 1 windows to J1647+4950_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000504008 Jy ! Component: 100 - total flux cleaned = 0.000477663 Jy ! Component: 150 - total flux cleaned = 0.000477451 Jy ! Component: 200 - total flux cleaned = 0.000475681 Jy ! Component: 250 - total flux cleaned = 0.000454291 Jy ! Component: 300 - total flux cleaned = 0.000414498 Jy ! Component: 350 - total flux cleaned = 0.000318111 Jy ! Component: 400 - total flux cleaned = 0.000280906 Jy ! Component: 450 - total flux cleaned = 0.000316943 Jy ! Component: 500 - total flux cleaned = 0.000334019 Jy ! Component: 550 - total flux cleaned = 0.000350682 Jy ! Component: 600 - total flux cleaned = 0.000334396 Jy ! Component: 650 - total flux cleaned = 0.000318139 Jy ! Component: 700 - total flux cleaned = 0.000286696 Jy ! Component: 750 - total flux cleaned = 0.000225409 Jy ! Component: 800 - total flux cleaned = 0.000120928 Jy ! Component: 850 - total flux cleaned = 7.70604e-05 Jy ! Component: 900 - total flux cleaned = -2.34002e-05 Jy ! Component: 950 - total flux cleaned = -0.000107938 Jy ! Component: 1000 - total flux cleaned = -0.000231476 Jy ! Component: 1050 - total flux cleaned = -0.000339134 Jy ! Component: 1100 - total flux cleaned = -0.000391931 Jy ! Component: 1150 - total flux cleaned = -0.000392078 Jy ! Component: 1200 - total flux cleaned = -0.00049469 Jy ! Component: 1250 - total flux cleaned = -0.000570334 Jy ! Component: 1300 - total flux cleaned = -0.00066969 Jy ! Component: 1350 - total flux cleaned = -0.000755281 Jy ! Component: 1400 - total flux cleaned = -0.00083963 Jy ! Component: 1450 - total flux cleaned = -0.000887151 Jy ! Component: 1500 - total flux cleaned = -0.000934367 Jy ! Component: 1550 - total flux cleaned = -0.00100384 Jy ! Component: 1600 - total flux cleaned = -0.00103823 Jy ! Component: 1650 - total flux cleaned = -0.00107218 Jy ! Component: 1700 - total flux cleaned = -0.00106102 Jy ! Component: 1750 - total flux cleaned = -0.0011053 Jy ! Component: 1800 - total flux cleaned = -0.00108338 Jy ! Component: 1850 - total flux cleaned = -0.00106158 Jy ! Component: 1900 - total flux cleaned = -0.00105085 Jy ! Component: 1950 - total flux cleaned = -0.00106159 Jy ! Component: 2000 - total flux cleaned = -0.00106174 Jy ! Component: 2050 - total flux cleaned = -0.00110361 Jy ! Component: 2100 - total flux cleaned = -0.00109322 Jy ! Component: 2150 - total flux cleaned = -0.00109324 Jy ! Component: 2200 - total flux cleaned = -0.00109332 Jy ! Component: 2250 - total flux cleaned = -0.00107307 Jy ! Component: 2300 - total flux cleaned = -0.00109327 Jy ! Component: 2350 - total flux cleaned = -0.00106339 Jy ! Component: 2400 - total flux cleaned = -0.00106348 Jy ! Component: 2450 - total flux cleaned = -0.00104376 Jy ! Component: 2500 - total flux cleaned = -0.00105358 Jy ! Component: 2550 - total flux cleaned = -0.00105356 Jy ! Component: 2600 - total flux cleaned = -0.00107285 Jy ! Component: 2650 - total flux cleaned = -0.00105363 Jy ! Component: 2700 - total flux cleaned = -0.0010441 Jy ! Component: 2750 - total flux cleaned = -0.00105354 Jy ! Component: 2800 - total flux cleaned = -0.0010535 Jy ! Component: 2850 - total flux cleaned = -0.00102548 Jy ! Component: 2900 - total flux cleaned = -0.00106264 Jy ! Component: 2950 - total flux cleaned = -0.00104411 Jy ! Component: 3000 - total flux cleaned = -0.00103486 Jy ! Component: 3050 - total flux cleaned = -0.00103486 Jy ! Component: 3100 - total flux cleaned = -0.00108037 Jy ! Component: 3150 - total flux cleaned = -0.00106224 Jy ! Component: 3200 - total flux cleaned = -0.0010983 Jy ! Component: 3250 - total flux cleaned = -0.0011432 Jy ! Component: 3300 - total flux cleaned = -0.00117008 Jy ! Component: 3350 - total flux cleaned = -0.00119683 Jy ! Component: 3400 - total flux cleaned = -0.00121462 Jy ! Component: 3450 - total flux cleaned = -0.00124117 Jy ! Component: 3500 - total flux cleaned = -0.00125003 Jy ! Component: 3550 - total flux cleaned = -0.00129405 Jy ! Component: 3600 - total flux cleaned = -0.00130278 Jy ! Component: 3650 - total flux cleaned = -0.00132905 Jy ! Component: 3700 - total flux cleaned = -0.00134653 Jy ! Component: 3750 - total flux cleaned = -0.00137271 Jy ! Component: 3800 - total flux cleaned = -0.00139881 Jy ! Component: 3850 - total flux cleaned = -0.00143355 Jy ! Component: 3900 - total flux cleaned = -0.00145957 Jy ! Component: 3950 - total flux cleaned = -0.00148555 Jy ! Component: 4000 - total flux cleaned = -0.00149419 Jy ! Component: 4050 - total flux cleaned = -0.00152004 Jy ! Total flux subtracted in 4096 components = -0.00152863 Jy ! Clean residual min=-0.000500 max=0.000482 Jy/beam ! Clean residual mean=-0.000001 rms=0.000147 Jy/beam ! Combined flux in latest and established models = 0.103163 Jy keep ! Adding 257 model components to the UV plane model. ! The established model now contains 342 components and 0.103163 Jy ![Exited script file: muppet] wmap "J1647+4950_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.767 x 9.997 at 32.23 degrees (North through East) ! Clean map min=-0.00097314 max=0.087336 Jy/beam ! Writing clean map to FITS file: J1647+4950_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0873365 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000141563 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.486268 0.486268 0.972537 1.94507 3.89015 7.78029 15.5606 31.1212 62.2423 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.087 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.767 x 9.997 at 32.23 degrees (North through East) ! Clean map min=-0.00097314 max=0.087336 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1647+4950_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:32:12 2017