! Started logfile: J1646+4059_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:32:02 2017 obs J1646+4059_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J1646+4059_S_2014_01_04_pus_uva.fits ! AN table 1: 59 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.433145 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1646+4059 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 3680 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1646+4059_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 176 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 176 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 176 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 176 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.751132Jy sigma=0.012057 ! Fit after self-cal, rms=0.736322Jy sigma=0.011860 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.009 mas, bmaj=9.101 mas, bpa=29.3 degrees ! Estimated noise=1249.45 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.199906 Jy ! Component: 100 - total flux cleaned = 0.245095 Jy ! Total flux subtracted in 100 components = 0.245095 Jy ! Clean residual min=-0.009967 max=0.015860 Jy/beam ! Clean residual mean=0.000028 rms=0.003109 Jy/beam ! Combined flux in latest and established models = 0.245095 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.245095 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078011Jy sigma=0.001080 ! Fit after self-cal, rms=0.077979Jy sigma=0.001080 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.762 mas, bmaj=9.46 mas, bpa=28.26 degrees ! Estimated noise=770.299 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0200039 Jy ! Component: 100 - total flux cleaned = 0.0303639 Jy ! Component: 150 - total flux cleaned = 0.0376596 Jy ! Component: 200 - total flux cleaned = 0.0428879 Jy ! Total flux subtracted in 200 components = 0.0428879 Jy ! Clean residual min=-0.007064 max=0.009001 Jy/beam ! Clean residual mean=0.000029 rms=0.002127 Jy/beam ! Combined flux in latest and established models = 0.287983 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 28 components and 0.287983 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070855Jy sigma=0.001013 ! Fit after self-cal, rms=0.070767Jy sigma=0.001012 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00* KP 1.00* LA 1.01 ! MK 0.97 NL 0.96 OV 0.96 PT 1.01 ! SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00* KP 1.00* LA 0.99 ! MK 0.98 NL 1.00 OV 1.00 PT 0.97 ! SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00* KP 1.00* LA 0.82 ! MK 1.02 NL 0.96 OV 0.92 PT 0.97 ! SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 1.00* KP 1.00* LA 0.88 ! MK 1.03 NL 1.07 OV 0.98 PT 1.00 ! SC 0.97 ! ! ! Fit before self-cal, rms=0.070767Jy sigma=0.001012 ! Fit after self-cal, rms=0.063237Jy sigma=0.000920 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.783 mas, bmaj=9.593 mas, bpa=28.02 degrees ! Estimated noise=765.782 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00354187 Jy ! Component: 100 - total flux cleaned = -0.00477441 Jy ! Component: 150 - total flux cleaned = -0.00522118 Jy ! Component: 200 - total flux cleaned = -0.00545571 Jy ! Total flux subtracted in 200 components = -0.00545571 Jy ! Clean residual min=-0.002653 max=0.002895 Jy/beam ! Clean residual mean=-0.000001 rms=0.000757 Jy/beam ! Combined flux in latest and established models = 0.282527 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 42 components and 0.282527 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063010Jy sigma=0.000917 ! Fit after self-cal, rms=0.062802Jy sigma=0.000916 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062802Jy sigma=0.000916 ! Fit after self-cal, rms=0.062588Jy sigma=0.000912 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.782 mas, bmaj=9.589 mas, bpa=28.01 degrees ! Estimated noise=765.828 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.67035e-05 Jy ! Component: 100 - total flux cleaned = -1.10853e-06 Jy ! Component: 150 - total flux cleaned = -6.00013e-05 Jy ! Component: 200 - total flux cleaned = -0.00011429 Jy ! Total flux subtracted in 200 components = -0.00011429 Jy ! Clean residual min=-0.002052 max=0.002168 Jy/beam ! Clean residual mean=-0.000003 rms=0.000531 Jy/beam ! Combined flux in latest and established models = 0.282413 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 49 components and 0.282413 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062541Jy sigma=0.000912 ! Fit after self-cal, rms=0.062525Jy sigma=0.000912 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000143701 Jy ! Component: 100 - total flux cleaned = -0.000146399 Jy ! Component: 150 - total flux cleaned = -0.000146436 Jy ! Component: 200 - total flux cleaned = -0.000184733 Jy ! Total flux subtracted in 200 components = -0.000184733 Jy ! Clean residual min=-0.002040 max=0.002132 Jy/beam ! Clean residual mean=-0.000002 rms=0.000518 Jy/beam ! Combined flux in latest and established models = 0.282228 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 52 components and 0.282228 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062503Jy sigma=0.000912 ! Fit after self-cal, rms=0.062506Jy sigma=0.000911 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062506Jy sigma=0.000911 ! Fit after self-cal, rms=0.062463Jy sigma=0.000911 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.781 mas, bmaj=9.588 mas, bpa=27.98 degrees ! Estimated noise=765.865 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000156398 Jy ! Component: 100 - total flux cleaned = 0.00013695 Jy ! Component: 150 - total flux cleaned = 0.000119726 Jy ! Component: 200 - total flux cleaned = 0.000102696 Jy ! Total flux subtracted in 200 components = 0.000102696 Jy ! Clean residual min=-0.002024 max=0.002083 Jy/beam ! Clean residual mean=-0.000002 rms=0.000502 Jy/beam ! Combined flux in latest and established models = 0.282331 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 56 components and 0.282331 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062447Jy sigma=0.000911 ! Fit after self-cal, rms=0.062443Jy sigma=0.000911 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.87002e-05 Jy ! Component: 100 - total flux cleaned = -4.44449e-05 Jy ! Component: 150 - total flux cleaned = -5.89847e-05 Jy ! Component: 200 - total flux cleaned = -8.62003e-05 Jy ! Total flux subtracted in 200 components = -8.62003e-05 Jy ! Clean residual min=-0.002042 max=0.002075 Jy/beam ! Clean residual mean=-0.000002 rms=0.000497 Jy/beam ! Combined flux in latest and established models = 0.282244 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 58 components and 0.282244 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062434Jy sigma=0.000911 ! Fit after self-cal, rms=0.062437Jy sigma=0.000911 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062437Jy sigma=0.000911 ! Fit after self-cal, rms=0.062417Jy sigma=0.000911 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.039 mas, bmaj=10.48 mas, bpa=28.34 degrees ! Estimated noise=852.84 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.73114e-05 Jy ! Component: 100 - total flux cleaned = 0.000147704 Jy ! Component: 150 - total flux cleaned = 0.000175883 Jy ! Component: 200 - total flux cleaned = 0.00019219 Jy ! Total flux subtracted in 200 components = 0.00019219 Jy ! Clean residual min=-0.001603 max=0.001725 Jy/beam ! Clean residual mean=-0.000004 rms=0.000482 Jy/beam ! Combined flux in latest and established models = 0.282437 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 64 components and 0.282437 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062417Jy sigma=0.000911 ! Fit after self-cal, rms=0.062415Jy sigma=0.000911 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.98661e-05 Jy ! Component: 100 - total flux cleaned = 0.000104551 Jy ! Component: 150 - total flux cleaned = 9.79514e-05 Jy ! Component: 200 - total flux cleaned = 9.18468e-05 Jy ! Total flux subtracted in 200 components = 9.18468e-05 Jy ! Clean residual min=-0.001571 max=0.001721 Jy/beam ! Clean residual mean=-0.000004 rms=0.000477 Jy/beam ! Combined flux in latest and established models = 0.282528 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 70 components and 0.282528 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062417Jy sigma=0.000911 ! Fit after self-cal, rms=0.062418Jy sigma=0.000911 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.78 mas, bmaj=9.588 mas, bpa=27.96 degrees ! Estimated noise=765.881 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.78 x 9.588 at 27.96 degrees (North through East) ! Clean map min=-0.0029169 max=0.25917 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.018 mas, bmaj=9.242 mas, bpa=29.05 degrees ! Estimated noise=1255.42 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.200859 Jy ! Component: 100 - total flux cleaned = 0.246164 Jy ! Component: 150 - total flux cleaned = 0.261918 Jy ! Component: 200 - total flux cleaned = 0.269573 Jy ! Total flux subtracted in 200 components = 0.269573 Jy ! Clean residual min=-0.004350 max=0.004908 Jy/beam ! Clean residual mean=0.000004 rms=0.001141 Jy/beam ! Combined flux in latest and established models = 0.269573 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.269573 Jy ! Inverting map and beam ! Estimated beam: bmin=3.78 mas, bmaj=9.588 mas, bpa=27.96 degrees ! Estimated noise=765.881 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00510169 Jy ! Component: 100 - total flux cleaned = 0.00813833 Jy ! Component: 150 - total flux cleaned = 0.00924776 Jy ! Component: 200 - total flux cleaned = 0.0101307 Jy ! Total flux subtracted in 200 components = 0.0101307 Jy ! Clean residual min=-0.002564 max=0.002371 Jy/beam ! Clean residual mean=0.000001 rms=0.000590 Jy/beam ! Combined flux in latest and established models = 0.279704 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 34 components and 0.279704 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.039 mas, bmaj=10.48 mas, bpa=28.34 degrees ! Estimated noise=852.84 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00167363 Jy ! Component: 100 - total flux cleaned = 0.00231054 Jy ! Component: 150 - total flux cleaned = 0.00255975 Jy ! Component: 200 - total flux cleaned = 0.002737 Jy ! Total flux subtracted in 200 components = 0.002737 Jy ! Clean residual min=-0.001949 max=0.002012 Jy/beam ! Clean residual mean=-0.000003 rms=0.000526 Jy/beam ! Combined flux in latest and established models = 0.282441 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.67167e-05 Jy ! Component: 100 - total flux cleaned = 0.000108992 Jy ! Component: 150 - total flux cleaned = 0.000141332 Jy ! Component: 200 - total flux cleaned = 0.000186529 Jy ! Total flux subtracted in 200 components = 0.000186529 Jy ! Clean residual min=-0.001873 max=0.001960 Jy/beam ! Clean residual mean=-0.000004 rms=0.000512 Jy/beam ! Combined flux in latest and established models = 0.282628 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 53 components and 0.282628 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.78 mas, bmaj=9.588 mas, bpa=27.96 degrees ! Estimated noise=765.881 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.9642e-05 Jy ! Component: 100 - total flux cleaned = -5.00094e-05 Jy ! Component: 150 - total flux cleaned = -0.000106794 Jy ! Component: 200 - total flux cleaned = -0.000106722 Jy ! Total flux subtracted in 200 components = -0.000106722 Jy ! Clean residual min=-0.002110 max=0.002143 Jy/beam ! Clean residual mean=-0.000002 rms=0.000511 Jy/beam ! Combined flux in latest and established models = 0.282521 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 70 components and 0.282521 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062454Jy sigma=0.000912 ! Fit after self-cal, rms=0.062460Jy sigma=0.000912 wmodel J1646+4059_S_2014_01_04_pus_map.mod ! Writing 70 model components to file: J1646+4059_S_2014_01_04_pus_map.mod wobs J1646+4059_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J1646+4059_S_2014_01_04_pus_uvs.fits wwins J1646+4059_S_2014_01_04_pus_map.win ! wwins: Wrote 1 windows to J1646+4059_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 8.4173e-05 Jy ! Component: 100 - total flux cleaned = -0.000132282 Jy ! Component: 150 - total flux cleaned = -0.000303098 Jy ! Component: 200 - total flux cleaned = -0.000335887 Jy ! Component: 250 - total flux cleaned = -0.000366848 Jy ! Component: 300 - total flux cleaned = -0.000451954 Jy ! Component: 350 - total flux cleaned = -0.000533251 Jy ! Component: 400 - total flux cleaned = -0.000585081 Jy ! Component: 450 - total flux cleaned = -0.00066129 Jy ! Component: 500 - total flux cleaned = -0.000832926 Jy ! Component: 550 - total flux cleaned = -0.000999263 Jy ! Component: 600 - total flux cleaned = -0.00116011 Jy ! Component: 650 - total flux cleaned = -0.00129414 Jy ! Component: 700 - total flux cleaned = -0.00142505 Jy ! Component: 750 - total flux cleaned = -0.00163658 Jy ! Component: 800 - total flux cleaned = -0.00171873 Jy ! Component: 850 - total flux cleaned = -0.00177934 Jy ! Component: 900 - total flux cleaned = -0.00189772 Jy ! Component: 950 - total flux cleaned = -0.00201287 Jy ! Component: 1000 - total flux cleaned = -0.00205027 Jy ! Component: 1050 - total flux cleaned = -0.00206894 Jy ! Component: 1100 - total flux cleaned = -0.00212286 Jy ! Component: 1150 - total flux cleaned = -0.00208736 Jy ! Component: 1200 - total flux cleaned = -0.00208761 Jy ! Component: 1250 - total flux cleaned = -0.00215623 Jy ! Component: 1300 - total flux cleaned = -0.00213966 Jy ! Component: 1350 - total flux cleaned = -0.00222262 Jy ! Component: 1400 - total flux cleaned = -0.00227111 Jy ! Component: 1450 - total flux cleaned = -0.00231889 Jy ! Component: 1500 - total flux cleaned = -0.0023657 Jy ! Component: 1550 - total flux cleaned = -0.00236562 Jy ! Component: 1600 - total flux cleaned = -0.00239634 Jy ! Component: 1650 - total flux cleaned = -0.00245697 Jy ! Component: 1700 - total flux cleaned = -0.00256079 Jy ! Component: 1750 - total flux cleaned = -0.00258995 Jy ! Component: 1800 - total flux cleaned = -0.00264786 Jy ! Component: 1850 - total flux cleaned = -0.00271885 Jy ! Component: 1900 - total flux cleaned = -0.00280276 Jy ! Component: 1950 - total flux cleaned = -0.0028026 Jy ! Component: 2000 - total flux cleaned = -0.0028571 Jy ! Component: 2050 - total flux cleaned = -0.00287048 Jy ! Component: 2100 - total flux cleaned = -0.00288384 Jy ! Component: 2150 - total flux cleaned = -0.00289703 Jy ! Component: 2200 - total flux cleaned = -0.00294892 Jy ! Component: 2250 - total flux cleaned = -0.00297461 Jy ! Component: 2300 - total flux cleaned = -0.00301255 Jy ! Component: 2350 - total flux cleaned = -0.00302493 Jy ! Component: 2400 - total flux cleaned = -0.00302514 Jy ! Component: 2450 - total flux cleaned = -0.00304968 Jy ! Component: 2500 - total flux cleaned = -0.00306175 Jy ! Component: 2550 - total flux cleaned = -0.00304982 Jy ! Component: 2600 - total flux cleaned = -0.00302595 Jy ! Component: 2650 - total flux cleaned = -0.00302624 Jy ! Component: 2700 - total flux cleaned = -0.00309651 Jy ! Component: 2750 - total flux cleaned = -0.00310805 Jy ! Component: 2800 - total flux cleaned = -0.00311954 Jy ! Component: 2850 - total flux cleaned = -0.00310807 Jy ! Component: 2900 - total flux cleaned = -0.00313072 Jy ! Component: 2950 - total flux cleaned = -0.00314199 Jy ! Component: 3000 - total flux cleaned = -0.00316426 Jy ! Component: 3050 - total flux cleaned = -0.00316426 Jy ! Component: 3100 - total flux cleaned = -0.00320837 Jy ! Component: 3150 - total flux cleaned = -0.00320828 Jy ! Component: 3200 - total flux cleaned = -0.00324093 Jy ! Component: 3250 - total flux cleaned = -0.0032301 Jy ! Component: 3300 - total flux cleaned = -0.00327321 Jy ! Component: 3350 - total flux cleaned = -0.00331602 Jy ! Component: 3400 - total flux cleaned = -0.00334793 Jy ! Component: 3450 - total flux cleaned = -0.0033903 Jy ! Component: 3500 - total flux cleaned = -0.00342191 Jy ! Component: 3550 - total flux cleaned = -0.00342193 Jy ! Component: 3600 - total flux cleaned = -0.0034637 Jy ! Component: 3650 - total flux cleaned = -0.00346373 Jy ! Component: 3700 - total flux cleaned = -0.00346372 Jy ! Component: 3750 - total flux cleaned = -0.00348449 Jy ! Component: 3800 - total flux cleaned = -0.00350506 Jy ! Component: 3850 - total flux cleaned = -0.00353582 Jy ! Component: 3900 - total flux cleaned = -0.00355617 Jy ! Component: 3950 - total flux cleaned = -0.00357653 Jy ! Component: 4000 - total flux cleaned = -0.00360697 Jy ! Component: 4050 - total flux cleaned = -0.00363727 Jy ! Total flux subtracted in 4096 components = -0.00363723 Jy ! Clean residual min=-0.000620 max=0.000591 Jy/beam ! Clean residual mean=-0.000001 rms=0.000174 Jy/beam ! Combined flux in latest and established models = 0.278884 Jy keep ! Adding 228 model components to the UV plane model. ! The established model now contains 298 components and 0.278884 Jy ![Exited script file: muppet] wmap "J1646+4059_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.78 x 9.588 at 27.96 degrees (North through East) ! Clean map min=-0.0015494 max=0.25961 Jy/beam ! Writing clean map to FITS file: J1646+4059_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.259606 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000172061 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.198834 0.198834 0.397668 0.795336 1.59067 3.18134 6.36269 12.7254 25.4507 50.9015 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.259 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.78 x 9.588 at 27.96 degrees (North through East) ! Clean map min=-0.0015494 max=0.25961 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1646+4059_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:32:07 2017