! Started logfile: J1644-1804_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:31:57 2017 obs J1644-1804_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J1644-1804_S_2014_01_04_pus_uva.fits ! AN table 1: 126 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.583333 visibilities/baseline/integration-bin. ! Found source: J1644-1804 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 10584 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1644-1804_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 252 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 252 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 252 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 252 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.942702Jy sigma=0.011961 ! Fit after self-cal, rms=0.886610Jy sigma=0.011299 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.46 mas, bmaj=5.662 mas, bpa=4.252 degrees ! Estimated noise=1155.68 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0895008 Jy ! Component: 100 - total flux cleaned = 0.109163 Jy ! Total flux subtracted in 100 components = 0.109163 Jy ! Clean residual min=-0.007483 max=0.008208 Jy/beam ! Clean residual mean=-0.000004 rms=0.001899 Jy/beam ! Combined flux in latest and established models = 0.109163 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.109163 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129726Jy sigma=0.000981 ! Fit after self-cal, rms=0.129657Jy sigma=0.000980 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.99 mas, bmaj=6.577 mas, bpa=1.888 degrees ! Estimated noise=599.443 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00913848 Jy ! Component: 100 - total flux cleaned = 0.0139823 Jy ! Component: 150 - total flux cleaned = 0.0168203 Jy ! Component: 200 - total flux cleaned = 0.0182528 Jy ! Total flux subtracted in 200 components = 0.0182528 Jy ! Clean residual min=-0.006895 max=0.007692 Jy/beam ! Clean residual mean=-0.000003 rms=0.001968 Jy/beam ! Combined flux in latest and established models = 0.127416 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 24 components and 0.127416 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128527Jy sigma=0.000979 ! Fit after self-cal, rms=0.128566Jy sigma=0.000978 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00* KP 1.00* LA 0.99 ! MK 1.03 NL 0.96 OV 0.90 PT 1.01 ! SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.40 FD 1.00* KP 1.00* LA 0.96 ! MK 1.00 NL 1.05 OV 0.95 PT 0.98 ! SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.29 FD 1.00* KP 1.00* LA 0.86 ! MK 0.99 NL 0.98 OV 0.90 PT 0.94 ! SC 0.96 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.00* KP 1.00* LA 0.85 ! MK 1.00 NL 1.04 OV 0.95 PT 1.01 ! SC 0.90 ! ! ! Fit before self-cal, rms=0.128566Jy sigma=0.000978 ! Fit after self-cal, rms=0.120988Jy sigma=0.000945 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.968 mas, bmaj=6.642 mas, bpa=1.982 degrees ! Estimated noise=612.523 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00280166 Jy ! Component: 100 - total flux cleaned = 0.00316201 Jy ! Component: 150 - total flux cleaned = 0.00338051 Jy ! Component: 200 - total flux cleaned = 0.00341724 Jy ! Total flux subtracted in 200 components = 0.00341724 Jy ! Clean residual min=-0.004585 max=0.005120 Jy/beam ! Clean residual mean=-0.000007 rms=0.001292 Jy/beam ! Combined flux in latest and established models = 0.130833 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 35 components and 0.130833 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120825Jy sigma=0.000945 ! Fit after self-cal, rms=0.120333Jy sigma=0.000943 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120333Jy sigma=0.000943 ! Fit after self-cal, rms=0.110567Jy sigma=0.000929 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.956 mas, bmaj=6.62 mas, bpa=1.941 degrees ! Estimated noise=615.848 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00180924 Jy ! Component: 100 - total flux cleaned = 0.00202451 Jy ! Component: 150 - total flux cleaned = 0.00212342 Jy ! Component: 200 - total flux cleaned = 0.00223747 Jy ! Total flux subtracted in 200 components = 0.00223747 Jy ! Clean residual min=-0.003577 max=0.005352 Jy/beam ! Clean residual mean=-0.000006 rms=0.000948 Jy/beam ! Combined flux in latest and established models = 0.133071 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 37 components and 0.133071 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110496Jy sigma=0.000929 ! Fit after self-cal, rms=0.110398Jy sigma=0.000928 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (6.5, -6.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00456486 Jy ! Component: 100 - total flux cleaned = 0.00665904 Jy ! Component: 150 - total flux cleaned = 0.00761571 Jy ! Component: 200 - total flux cleaned = 0.00800003 Jy ! Total flux subtracted in 200 components = 0.00800003 Jy ! Clean residual min=-0.002839 max=0.002685 Jy/beam ! Clean residual mean=-0.000013 rms=0.000719 Jy/beam ! Combined flux in latest and established models = 0.141071 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 59 components and 0.141071 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110214Jy sigma=0.000925 ! Fit after self-cal, rms=0.110202Jy sigma=0.000925 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110202Jy sigma=0.000925 ! Fit after self-cal, rms=0.107859Jy sigma=0.000924 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.948 mas, bmaj=6.602 mas, bpa=1.929 degrees ! Estimated noise=615.969 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00140402 Jy ! Component: 100 - total flux cleaned = 0.00189332 Jy ! Component: 150 - total flux cleaned = 0.00223663 Jy ! Component: 200 - total flux cleaned = 0.00240276 Jy ! Total flux subtracted in 200 components = 0.00240276 Jy ! Clean residual min=-0.002671 max=0.002486 Jy/beam ! Clean residual mean=-0.000013 rms=0.000679 Jy/beam ! Combined flux in latest and established models = 0.143473 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 76 components and 0.143473 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107816Jy sigma=0.000924 ! Fit after self-cal, rms=0.107811Jy sigma=0.000924 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000400921 Jy ! Component: 100 - total flux cleaned = 0.000497295 Jy ! Component: 150 - total flux cleaned = 0.000564471 Jy ! Component: 200 - total flux cleaned = 0.000627217 Jy ! Total flux subtracted in 200 components = 0.000627217 Jy ! Clean residual min=-0.002652 max=0.002505 Jy/beam ! Clean residual mean=-0.000013 rms=0.000668 Jy/beam ! Combined flux in latest and established models = 0.144101 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 83 components and 0.144101 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107792Jy sigma=0.000924 ! Fit after self-cal, rms=0.107788Jy sigma=0.000924 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107788Jy sigma=0.000924 ! Fit after self-cal, rms=0.108022Jy sigma=0.000924 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.372 mas, bmaj=15.53 mas, bpa=9.847 degrees ! Estimated noise=785.254 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000608123 Jy ! Component: 100 - total flux cleaned = 0.000759058 Jy ! Component: 150 - total flux cleaned = 0.000819697 Jy ! Component: 200 - total flux cleaned = 0.000867019 Jy ! Total flux subtracted in 200 components = 0.000867019 Jy ! Clean residual min=-0.003664 max=0.003569 Jy/beam ! Clean residual mean=-0.000032 rms=0.001080 Jy/beam ! Combined flux in latest and established models = 0.144968 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 95 components and 0.144968 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107999Jy sigma=0.000924 ! Fit after self-cal, rms=0.108001Jy sigma=0.000924 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000191182 Jy ! Component: 100 - total flux cleaned = 0.000192157 Jy ! Component: 150 - total flux cleaned = 0.000158909 Jy ! Component: 200 - total flux cleaned = 0.000115551 Jy ! Total flux subtracted in 200 components = 0.000115551 Jy ! Clean residual min=-0.003594 max=0.003582 Jy/beam ! Clean residual mean=-0.000032 rms=0.001065 Jy/beam ! Combined flux in latest and established models = 0.145083 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 100 components and 0.145083 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107998Jy sigma=0.000924 ! Fit after self-cal, rms=0.107997Jy sigma=0.000924 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.941 mas, bmaj=6.592 mas, bpa=1.927 degrees ! Estimated noise=617.823 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.941 x 6.592 at 1.927 degrees (North through East) ! Clean map min=-0.0028006 max=0.11535 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.43 mas, bmaj=5.672 mas, bpa=4.149 degrees ! Estimated noise=1177.59 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0914614 Jy ! Component: 100 - total flux cleaned = 0.112136 Jy ! Component: 150 - total flux cleaned = 0.120974 Jy ! Component: 200 - total flux cleaned = 0.126697 Jy ! Total flux subtracted in 200 components = 0.126697 Jy ! Clean residual min=-0.004620 max=0.004418 Jy/beam ! Clean residual mean=-0.000002 rms=0.001103 Jy/beam ! Combined flux in latest and established models = 0.126697 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.126697 Jy ! Inverting map and beam ! Estimated beam: bmin=2.941 mas, bmaj=6.592 mas, bpa=1.927 degrees ! Estimated noise=617.823 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00547743 Jy ! Component: 100 - total flux cleaned = 0.0090155 Jy ! Component: 150 - total flux cleaned = 0.0116444 Jy ! Component: 200 - total flux cleaned = 0.0136285 Jy ! Total flux subtracted in 200 components = 0.0136285 Jy ! Clean residual min=-0.003143 max=0.002644 Jy/beam ! Clean residual mean=-0.000010 rms=0.000747 Jy/beam ! Combined flux in latest and established models = 0.140325 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 44 components and 0.140325 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.372 mas, bmaj=15.53 mas, bpa=9.847 degrees ! Estimated noise=785.254 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00253344 Jy ! Component: 100 - total flux cleaned = 0.00316062 Jy ! Component: 150 - total flux cleaned = 0.00358715 Jy ! Component: 200 - total flux cleaned = 0.00388635 Jy ! Total flux subtracted in 200 components = 0.00388635 Jy ! Clean residual min=-0.003693 max=0.003605 Jy/beam ! Clean residual mean=-0.000031 rms=0.001099 Jy/beam ! Combined flux in latest and established models = 0.144212 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000183537 Jy ! Component: 100 - total flux cleaned = 0.000337827 Jy ! Component: 150 - total flux cleaned = 0.000447316 Jy ! Component: 200 - total flux cleaned = 0.000559763 Jy ! Total flux subtracted in 200 components = 0.000559763 Jy ! Clean residual min=-0.003566 max=0.003624 Jy/beam ! Clean residual mean=-0.000032 rms=0.001070 Jy/beam ! Combined flux in latest and established models = 0.144772 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 85 components and 0.144771 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.941 mas, bmaj=6.592 mas, bpa=1.927 degrees ! Estimated noise=617.823 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.92656e-06 Jy ! Component: 100 - total flux cleaned = 0.000187064 Jy ! Component: 150 - total flux cleaned = 0.000251538 Jy ! Component: 200 - total flux cleaned = 0.000251385 Jy ! Total flux subtracted in 200 components = 0.000251385 Jy ! Clean residual min=-0.002999 max=0.002614 Jy/beam ! Clean residual mean=-0.000013 rms=0.000661 Jy/beam ! Combined flux in latest and established models = 0.145023 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 107 components and 0.145023 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107988Jy sigma=0.000924 ! Fit after self-cal, rms=0.107962Jy sigma=0.000924 wmodel J1644-1804_S_2014_01_04_pus_map.mod ! Writing 107 model components to file: J1644-1804_S_2014_01_04_pus_map.mod wobs J1644-1804_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J1644-1804_S_2014_01_04_pus_uvs.fits wwins J1644-1804_S_2014_01_04_pus_map.win ! wwins: Wrote 2 windows to J1644-1804_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000172136 Jy ! Component: 100 - total flux cleaned = -0.00012954 Jy ! Component: 150 - total flux cleaned = -0.000251281 Jy ! Component: 200 - total flux cleaned = -0.00040315 Jy ! Component: 250 - total flux cleaned = -0.000438817 Jy ! Component: 300 - total flux cleaned = -0.00047309 Jy ! Component: 350 - total flux cleaned = -0.000572416 Jy ! Component: 400 - total flux cleaned = -0.000636273 Jy ! Component: 450 - total flux cleaned = -0.000697436 Jy ! Component: 500 - total flux cleaned = -0.000727176 Jy ! Component: 550 - total flux cleaned = -0.000756006 Jy ! Component: 600 - total flux cleaned = -0.000755316 Jy ! Component: 650 - total flux cleaned = -0.000782505 Jy ! Component: 700 - total flux cleaned = -0.000835628 Jy ! Component: 750 - total flux cleaned = -0.00091374 Jy ! Component: 800 - total flux cleaned = -0.000964957 Jy ! Component: 850 - total flux cleaned = -0.00114125 Jy ! Component: 900 - total flux cleaned = -0.00116557 Jy ! Component: 950 - total flux cleaned = -0.00131068 Jy ! Component: 1000 - total flux cleaned = -0.00145348 Jy ! Component: 1050 - total flux cleaned = -0.00152358 Jy ! Component: 1100 - total flux cleaned = -0.00161616 Jy ! Component: 1150 - total flux cleaned = -0.00184166 Jy ! Component: 1200 - total flux cleaned = -0.00190734 Jy ! Component: 1250 - total flux cleaned = -0.00195096 Jy ! Component: 1300 - total flux cleaned = -0.00210085 Jy ! Component: 1350 - total flux cleaned = -0.00220623 Jy ! Component: 1400 - total flux cleaned = -0.0022893 Jy ! Component: 1450 - total flux cleaned = -0.00239119 Jy ! Component: 1500 - total flux cleaned = -0.00255111 Jy ! Component: 1550 - total flux cleaned = -0.00262966 Jy ! Component: 1600 - total flux cleaned = -0.0026685 Jy ! Component: 1650 - total flux cleaned = -0.00274525 Jy ! Component: 1700 - total flux cleaned = -0.00278277 Jy ! Component: 1750 - total flux cleaned = -0.00283836 Jy ! Component: 1800 - total flux cleaned = -0.00294799 Jy ! Component: 1850 - total flux cleaned = -0.00305541 Jy ! Component: 1900 - total flux cleaned = -0.00312626 Jy ! Component: 1950 - total flux cleaned = -0.00323137 Jy ! Component: 2000 - total flux cleaned = -0.00326572 Jy ! Component: 2050 - total flux cleaned = -0.00333402 Jy ! Component: 2100 - total flux cleaned = -0.00346864 Jy ! Component: 2150 - total flux cleaned = -0.00351839 Jy ! Component: 2200 - total flux cleaned = -0.00364981 Jy ! Component: 2250 - total flux cleaned = -0.00371486 Jy ! Component: 2300 - total flux cleaned = -0.00387509 Jy ! Component: 2350 - total flux cleaned = -0.00397008 Jy ! Component: 2400 - total flux cleaned = -0.00401718 Jy ! Component: 2450 - total flux cleaned = -0.00415686 Jy ! Component: 2500 - total flux cleaned = -0.00424897 Jy ! Component: 2550 - total flux cleaned = -0.00434009 Jy ! Component: 2600 - total flux cleaned = -0.00440034 Jy ! Component: 2650 - total flux cleaned = -0.00447482 Jy ! Component: 2700 - total flux cleaned = -0.00456343 Jy ! Component: 2750 - total flux cleaned = -0.00460727 Jy ! Component: 2800 - total flux cleaned = -0.00467979 Jy ! Component: 2850 - total flux cleaned = -0.00475179 Jy ! Component: 2900 - total flux cleaned = -0.00476621 Jy ! Component: 2950 - total flux cleaned = -0.00485134 Jy ! Component: 3000 - total flux cleaned = -0.00489356 Jy ! Component: 3050 - total flux cleaned = -0.00492142 Jy ! Component: 3100 - total flux cleaned = -0.00503212 Jy ! Component: 3150 - total flux cleaned = -0.00505949 Jy ! Component: 3200 - total flux cleaned = -0.00512774 Jy ! Component: 3250 - total flux cleaned = -0.0051007 Jy ! Component: 3300 - total flux cleaned = -0.00511431 Jy ! Component: 3350 - total flux cleaned = -0.00511431 Jy ! Component: 3400 - total flux cleaned = -0.00510101 Jy ! Component: 3450 - total flux cleaned = -0.00507447 Jy ! Component: 3500 - total flux cleaned = -0.00508762 Jy ! Component: 3550 - total flux cleaned = -0.00506131 Jy ! Component: 3600 - total flux cleaned = -0.0050613 Jy ! Component: 3650 - total flux cleaned = -0.00503525 Jy ! Component: 3700 - total flux cleaned = -0.00498345 Jy ! Component: 3750 - total flux cleaned = -0.00498346 Jy ! Component: 3800 - total flux cleaned = -0.00495788 Jy ! Component: 3850 - total flux cleaned = -0.00491946 Jy ! Component: 3900 - total flux cleaned = -0.00491945 Jy ! Component: 3950 - total flux cleaned = -0.00486873 Jy ! Component: 4000 - total flux cleaned = -0.00486872 Jy ! Component: 4050 - total flux cleaned = -0.0048561 Jy ! Total flux subtracted in 4096 components = -0.00480595 Jy ! Clean residual min=-0.000678 max=0.000650 Jy/beam ! Clean residual mean=-0.000004 rms=0.000218 Jy/beam ! Combined flux in latest and established models = 0.140217 Jy keep ! Adding 260 model components to the UV plane model. ! The established model now contains 367 components and 0.140217 Jy ![Exited script file: muppet] wmap "J1644-1804_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.941 x 6.592 at 1.927 degrees (North through East) ! Clean map min=-0.0015071 max=0.11754 Jy/beam ! Writing clean map to FITS file: J1644-1804_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.117537 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000204451 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.52184 0.52184 1.04368 2.08736 4.17472 8.34945 16.6989 33.3978 66.7956 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.117 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.941 x 6.592 at 1.927 degrees (North through East) ! Clean map min=-0.0015071 max=0.11754 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1644-1804_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:32:02 2017