! Started logfile: J1643-0402_S_2014_08_05_pus_uvs.log on Sun Nov 13 17:32:05 2016 obs J1643-0402_S_2014_08_05_pus_uva.fits ! Reading UV FITS file: J1643-0402_S_2014_08_05_pus_uva.fits ! AN table 1: 122 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.53388 visibilities/baseline/integration-bin. ! Found source: J1643-0402 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 360 lines of history. ! ! Reading 11724 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1643-0402_S_2014_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 314 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 314 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 314 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 314 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.944457Jy sigma=0.009790 ! Fit after self-cal, rms=0.886680Jy sigma=0.009192 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.649 mas, bmaj=10.39 mas, bpa=17.38 degrees ! Estimated noise=1151.54 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0912702 Jy ! Component: 100 - total flux cleaned = 0.111192 Jy ! Total flux subtracted in 100 components = 0.111192 Jy ! Clean residual min=-0.006150 max=0.007427 Jy/beam ! Clean residual mean=-0.000004 rms=0.001770 Jy/beam ! Combined flux in latest and established models = 0.111192 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.111192 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085815Jy sigma=0.000821 ! Fit after self-cal, rms=0.085686Jy sigma=0.000820 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.421 mas, bmaj=11.72 mas, bpa=17.57 degrees ! Estimated noise=640.911 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00417181 Jy ! Component: 100 - total flux cleaned = 0.00465815 Jy ! Component: 150 - total flux cleaned = 0.00466529 Jy ! Component: 200 - total flux cleaned = 0.00471068 Jy ! Total flux subtracted in 200 components = 0.00471068 Jy ! Clean residual min=-0.005648 max=0.006160 Jy/beam ! Clean residual mean=-0.000012 rms=0.001671 Jy/beam ! Combined flux in latest and established models = 0.115903 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 17 components and 0.115903 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085425Jy sigma=0.000818 ! Fit after self-cal, rms=0.085414Jy sigma=0.000818 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.82 HN 1.00 KP 1.02 ! LA 1.01 MK 1.00* NL 0.92 OV 1.14 ! PT 1.03 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.20 HN 1.02 KP 1.19 ! LA 1.01 MK 1.00* NL 0.98 OV 1.00 ! PT 1.16 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.11 HN 1.05 KP 0.85 ! LA 0.78 MK 1.00* NL 0.98 OV 0.92 ! PT 2.20 SC 1.05 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.99 HN 1.05 KP 0.86 ! LA 0.75 MK 1.00* NL 1.27 OV 0.95 ! PT 1.03 SC 0.95 ! ! ! Fit before self-cal, rms=0.085414Jy sigma=0.000818 ! Fit after self-cal, rms=0.083844Jy sigma=0.000788 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.394 mas, bmaj=11.76 mas, bpa=17.79 degrees ! Estimated noise=633.655 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000906584 Jy ! Component: 100 - total flux cleaned = -0.000841156 Jy ! Component: 150 - total flux cleaned = -0.000787901 Jy ! Component: 200 - total flux cleaned = -0.00074495 Jy ! Total flux subtracted in 200 components = -0.00074495 Jy ! Clean residual min=-0.005278 max=0.004768 Jy/beam ! Clean residual mean=-0.000018 rms=0.001253 Jy/beam ! Combined flux in latest and established models = 0.115158 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 34 components and 0.115158 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083810Jy sigma=0.000788 ! Fit after self-cal, rms=0.083996Jy sigma=0.000787 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083996Jy sigma=0.000787 ! Fit after self-cal, rms=0.103007Jy sigma=0.000768 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.363 mas, bmaj=11.69 mas, bpa=17.55 degrees ! Estimated noise=636.295 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00169951 Jy ! Component: 100 - total flux cleaned = 0.00224723 Jy ! Component: 150 - total flux cleaned = 0.00241065 Jy ! Component: 200 - total flux cleaned = 0.00253131 Jy ! Total flux subtracted in 200 components = 0.00253131 Jy ! Clean residual min=-0.002424 max=0.002208 Jy/beam ! Clean residual mean=0.000001 rms=0.000610 Jy/beam ! Combined flux in latest and established models = 0.117689 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 48 components and 0.117689 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102939Jy sigma=0.000767 ! Fit after self-cal, rms=0.103731Jy sigma=0.000766 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.8472e-05 Jy ! Component: 100 - total flux cleaned = -1.05144e-05 Jy ! Component: 150 - total flux cleaned = 7.72031e-05 Jy ! Component: 200 - total flux cleaned = 0.000156226 Jy ! Total flux subtracted in 200 components = 0.000156226 Jy ! Clean residual min=-0.002381 max=0.002106 Jy/beam ! Clean residual mean=0.000001 rms=0.000577 Jy/beam ! Combined flux in latest and established models = 0.117845 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 52 components and 0.117845 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103722Jy sigma=0.000766 ! Fit after self-cal, rms=0.103722Jy sigma=0.000766 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103722Jy sigma=0.000766 ! Fit after self-cal, rms=0.109018Jy sigma=0.000766 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.337 mas, bmaj=11.63 mas, bpa=17.49 degrees ! Estimated noise=637.425 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00112059 Jy ! Component: 100 - total flux cleaned = 0.00166518 Jy ! Component: 150 - total flux cleaned = 0.00180417 Jy ! Component: 200 - total flux cleaned = 0.0019097 Jy ! Total flux subtracted in 200 components = 0.0019097 Jy ! Clean residual min=-0.002228 max=0.002012 Jy/beam ! Clean residual mean=0.000002 rms=0.000546 Jy/beam ! Combined flux in latest and established models = 0.119755 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 72 components and 0.119755 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108978Jy sigma=0.000766 ! Fit after self-cal, rms=0.109064Jy sigma=0.000766 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.93704e-05 Jy ! Component: 100 - total flux cleaned = 0.000114891 Jy ! Component: 150 - total flux cleaned = 0.000184197 Jy ! Component: 200 - total flux cleaned = 0.000247394 Jy ! Total flux subtracted in 200 components = 0.000247394 Jy ! Clean residual min=-0.002218 max=0.001984 Jy/beam ! Clean residual mean=0.000002 rms=0.000542 Jy/beam ! Combined flux in latest and established models = 0.120002 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 78 components and 0.120002 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109058Jy sigma=0.000766 ! Fit after self-cal, rms=0.109058Jy sigma=0.000766 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109058Jy sigma=0.000766 ! Fit after self-cal, rms=0.110193Jy sigma=0.000766 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.323 mas, bmaj=14.16 mas, bpa=16.81 degrees ! Estimated noise=737.61 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000887511 Jy ! Component: 100 - total flux cleaned = 0.00132746 Jy ! Component: 150 - total flux cleaned = 0.00155341 Jy ! Component: 200 - total flux cleaned = 0.00160019 Jy ! Total flux subtracted in 200 components = 0.00160019 Jy ! Clean residual min=-0.002275 max=0.002034 Jy/beam ! Clean residual mean=0.000003 rms=0.000642 Jy/beam ! Combined flux in latest and established models = 0.121602 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 90 components and 0.121602 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110163Jy sigma=0.000766 ! Fit after self-cal, rms=0.110166Jy sigma=0.000766 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.4469e-05 Jy ! Component: 100 - total flux cleaned = 3.44255e-05 Jy ! Component: 150 - total flux cleaned = 3.44014e-05 Jy ! Component: 200 - total flux cleaned = 3.4263e-05 Jy ! Total flux subtracted in 200 components = 3.4263e-05 Jy ! Clean residual min=-0.002283 max=0.002045 Jy/beam ! Clean residual mean=0.000003 rms=0.000643 Jy/beam ! Combined flux in latest and established models = 0.121637 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 94 components and 0.121637 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110166Jy sigma=0.000766 ! Fit after self-cal, rms=0.110166Jy sigma=0.000766 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.321 mas, bmaj=11.58 mas, bpa=17.45 degrees ! Estimated noise=638.539 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.321 x 11.58 at 17.45 degrees (North through East) ! Clean map min=-0.0020656 max=0.11482 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.57 mas, bmaj=10.31 mas, bpa=17.32 degrees ! Estimated noise=1133.3 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0897353 Jy ! Component: 100 - total flux cleaned = 0.109412 Jy ! Component: 150 - total flux cleaned = 0.114256 Jy ! Component: 200 - total flux cleaned = 0.116791 Jy ! Total flux subtracted in 200 components = 0.116791 Jy ! Clean residual min=-0.004140 max=0.004664 Jy/beam ! Clean residual mean=0.000001 rms=0.001225 Jy/beam ! Combined flux in latest and established models = 0.116791 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.116791 Jy ! Inverting map and beam ! Estimated beam: bmin=4.321 mas, bmaj=11.58 mas, bpa=17.45 degrees ! Estimated noise=638.539 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00266034 Jy ! Component: 100 - total flux cleaned = 0.00390551 Jy ! Component: 150 - total flux cleaned = 0.00449166 Jy ! Component: 200 - total flux cleaned = 0.00469254 Jy ! Total flux subtracted in 200 components = 0.00469254 Jy ! Clean residual min=-0.002199 max=0.001907 Jy/beam ! Clean residual mean=0.000002 rms=0.000543 Jy/beam ! Combined flux in latest and established models = 0.121483 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 41 components and 0.121483 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.323 mas, bmaj=14.16 mas, bpa=16.81 degrees ! Estimated noise=737.61 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000188405 Jy ! Component: 100 - total flux cleaned = 0.000277932 Jy ! Component: 150 - total flux cleaned = 0.000359089 Jy ! Component: 200 - total flux cleaned = 0.000369128 Jy ! Total flux subtracted in 200 components = 0.000369128 Jy ! Clean residual min=-0.002344 max=0.002077 Jy/beam ! Clean residual mean=0.000004 rms=0.000650 Jy/beam ! Combined flux in latest and established models = 0.121853 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.79885e-05 Jy ! Component: 100 - total flux cleaned = -3.491e-05 Jy ! Component: 150 - total flux cleaned = -5.02451e-05 Jy ! Component: 200 - total flux cleaned = -6.45564e-05 Jy ! Total flux subtracted in 200 components = -6.45564e-05 Jy ! Clean residual min=-0.002326 max=0.002069 Jy/beam ! Clean residual mean=0.000003 rms=0.000649 Jy/beam ! Combined flux in latest and established models = 0.121788 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 52 components and 0.121788 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.321 mas, bmaj=11.58 mas, bpa=17.45 degrees ! Estimated noise=638.539 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.21609e-05 Jy ! Component: 100 - total flux cleaned = -5.28355e-06 Jy ! Component: 150 - total flux cleaned = 7.87355e-06 Jy ! Component: 200 - total flux cleaned = 7.43578e-06 Jy ! Total flux subtracted in 200 components = 7.43578e-06 Jy ! Clean residual min=-0.002119 max=0.001940 Jy/beam ! Clean residual mean=0.000002 rms=0.000533 Jy/beam ! Combined flux in latest and established models = 0.121795 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 62 components and 0.121795 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110171Jy sigma=0.000766 ! Fit after self-cal, rms=0.110174Jy sigma=0.000766 wmodel J1643-0402_S_2014_08_05_pus_map.mod ! Writing 62 model components to file: J1643-0402_S_2014_08_05_pus_map.mod wobs J1643-0402_S_2014_08_05_pus_uvs.fits ! Writing UV FITS file: J1643-0402_S_2014_08_05_pus_uvs.fits wwins J1643-0402_S_2014_08_05_pus_map.win ! wwins: Wrote 1 windows to J1643-0402_S_2014_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000691031 Jy ! Component: 100 - total flux cleaned = -0.000994314 Jy ! Component: 150 - total flux cleaned = -0.00105772 Jy ! Component: 200 - total flux cleaned = -0.0011451 Jy ! Component: 250 - total flux cleaned = -0.00120038 Jy ! Component: 300 - total flux cleaned = -0.00125353 Jy ! Component: 350 - total flux cleaned = -0.0013559 Jy ! Component: 400 - total flux cleaned = -0.00133039 Jy ! Component: 450 - total flux cleaned = -0.00135451 Jy ! Component: 500 - total flux cleaned = -0.00144791 Jy ! Component: 550 - total flux cleaned = -0.0014708 Jy ! Component: 600 - total flux cleaned = -0.00151464 Jy ! Component: 650 - total flux cleaned = -0.00153545 Jy ! Component: 700 - total flux cleaned = -0.00155526 Jy ! Component: 750 - total flux cleaned = -0.00149476 Jy ! Component: 800 - total flux cleaned = -0.00147547 Jy ! Component: 850 - total flux cleaned = -0.0014183 Jy ! Component: 900 - total flux cleaned = -0.00138151 Jy ! Component: 950 - total flux cleaned = -0.00136327 Jy ! Component: 1000 - total flux cleaned = -0.00132807 Jy ! Component: 1050 - total flux cleaned = -0.00138009 Jy ! Component: 1100 - total flux cleaned = -0.00137974 Jy ! Component: 1150 - total flux cleaned = -0.00131288 Jy ! Component: 1200 - total flux cleaned = -0.00131293 Jy ! Component: 1250 - total flux cleaned = -0.00126459 Jy ! Component: 1300 - total flux cleaned = -0.00124857 Jy ! Component: 1350 - total flux cleaned = -0.00123282 Jy ! Component: 1400 - total flux cleaned = -0.00117273 Jy ! Component: 1450 - total flux cleaned = -0.00118745 Jy ! Component: 1500 - total flux cleaned = -0.00121646 Jy ! Component: 1550 - total flux cleaned = -0.00120237 Jy ! Component: 1600 - total flux cleaned = -0.00118858 Jy ! Component: 1650 - total flux cleaned = -0.0011475 Jy ! Component: 1700 - total flux cleaned = -0.00110712 Jy ! Component: 1750 - total flux cleaned = -0.00104091 Jy ! Component: 1800 - total flux cleaned = -0.000975789 Jy ! Component: 1850 - total flux cleaned = -0.000924514 Jy ! Component: 1900 - total flux cleaned = -0.000861408 Jy ! Component: 1950 - total flux cleaned = -0.000824197 Jy ! Component: 2000 - total flux cleaned = -0.000762785 Jy ! Component: 2050 - total flux cleaned = -0.000738616 Jy ! Component: 2100 - total flux cleaned = -0.000678841 Jy ! Component: 2150 - total flux cleaned = -0.00060851 Jy ! Component: 2200 - total flux cleaned = -0.000585295 Jy ! Component: 2250 - total flux cleaned = -0.000528155 Jy ! Component: 2300 - total flux cleaned = -0.000483099 Jy ! Component: 2350 - total flux cleaned = -0.000460819 Jy ! Component: 2400 - total flux cleaned = -0.000383937 Jy ! Component: 2450 - total flux cleaned = -0.000362187 Jy ! Component: 2500 - total flux cleaned = -0.000308521 Jy ! Component: 2550 - total flux cleaned = -0.000276654 Jy ! Component: 2600 - total flux cleaned = -0.00025566 Jy ! Component: 2650 - total flux cleaned = -0.000234994 Jy ! Component: 2700 - total flux cleaned = -0.000194014 Jy ! Component: 2750 - total flux cleaned = -0.000194211 Jy ! Component: 2800 - total flux cleaned = -0.000224478 Jy ! Component: 2850 - total flux cleaned = -0.000184681 Jy ! Component: 2900 - total flux cleaned = -0.00020446 Jy ! Component: 2950 - total flux cleaned = -0.000223922 Jy ! Component: 3000 - total flux cleaned = -0.000223756 Jy ! Component: 3050 - total flux cleaned = -0.000195027 Jy ! Component: 3100 - total flux cleaned = -0.000204405 Jy ! Component: 3150 - total flux cleaned = -0.000213787 Jy ! Component: 3200 - total flux cleaned = -0.000241552 Jy ! Component: 3250 - total flux cleaned = -0.000241468 Jy ! Component: 3300 - total flux cleaned = -0.000232375 Jy ! Component: 3350 - total flux cleaned = -0.000286776 Jy ! Component: 3400 - total flux cleaned = -0.000295672 Jy ! Component: 3450 - total flux cleaned = -0.000295647 Jy ! Component: 3500 - total flux cleaned = -0.000304498 Jy ! Component: 3550 - total flux cleaned = -0.00031329 Jy ! Component: 3600 - total flux cleaned = -0.000356823 Jy ! Component: 3650 - total flux cleaned = -0.000408432 Jy ! Component: 3700 - total flux cleaned = -0.000399812 Jy ! Component: 3750 - total flux cleaned = -0.000399805 Jy ! Component: 3800 - total flux cleaned = -0.000433611 Jy ! Component: 3850 - total flux cleaned = -0.000441964 Jy ! Component: 3900 - total flux cleaned = -0.000491842 Jy ! Component: 3950 - total flux cleaned = -0.000500058 Jy ! Component: 4000 - total flux cleaned = -0.000516537 Jy ! Component: 4050 - total flux cleaned = -0.000549066 Jy ! Total flux subtracted in 4096 components = -0.000549075 Jy ! Clean residual min=-0.000556 max=0.000507 Jy/beam ! Clean residual mean=-0.000001 rms=0.000157 Jy/beam ! Combined flux in latest and established models = 0.121246 Jy keep ! Adding 310 model components to the UV plane model. ! The established model now contains 372 components and 0.121246 Jy ![Exited script file: muppet] wmap "J1643-0402_S_2014_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.321 x 11.58 at 17.45 degrees (North through East) ! Clean map min=-0.0012222 max=0.11454 Jy/beam ! Writing clean map to FITS file: J1643-0402_S_2014_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.114541 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000156551 device "J1643-0402_S_2014_08_05_pus\_map.eps/VPS" ! Attempting to open device: 'J1643-0402_S_2014_08_05_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.41003 0.41003 0.82006 1.64012 3.28024 6.56048 13.121 26.2419 52.4838 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.114 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.321 x 11.58 at 17.45 degrees (North through East) ! Clean map min=-0.0012222 max=0.11454 Jy/beam quit ! Quitting program ! Log file J1643-0402_S_2014_08_05_pus_uvs.log closed on Sun Nov 13 17:32:10 2016