! Started logfile: J1642+2523_S_2015_01_23_pus_uvs.log on Mon Jan 2 19:30:01 2017 obs J1642+2523_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J1642+2523_S_2015_01_23_pus_uva.fits ! AN table 1: 55 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.981818 visibilities/baseline/integration-bin. ! Found source: J1642+2523 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 9720 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1642+2523_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 5 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 5 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 5 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 5 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.686259Jy sigma=0.006798 ! Fit after self-cal, rms=0.659169Jy sigma=0.006456 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.828 mas, bmaj=5.765 mas, bpa=-2.978 degrees ! Estimated noise=963.904 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.365158 Jy ! Component: 100 - total flux cleaned = 0.452561 Jy ! Total flux subtracted in 100 components = 0.452561 Jy ! Clean residual min=-0.022066 max=0.034318 Jy/beam ! Clean residual mean=-0.000076 rms=0.006112 Jy/beam ! Combined flux in latest and established models = 0.45256 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.45256 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.518055Jy sigma=0.001609 ! Fit after self-cal, rms=0.518066Jy sigma=0.001609 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.289 mas, bmaj=6.619 mas, bpa=-2.533 degrees ! Estimated noise=681.839 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.041222 Jy ! Component: 100 - total flux cleaned = 0.0605724 Jy ! Component: 150 - total flux cleaned = 0.0726808 Jy ! Component: 200 - total flux cleaned = 0.0807818 Jy ! Total flux subtracted in 200 components = 0.0807818 Jy ! Clean residual min=-0.025486 max=0.033259 Jy/beam ! Clean residual mean=-0.000108 rms=0.007117 Jy/beam ! Combined flux in latest and established models = 0.533342 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 31 components and 0.533342 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.504863Jy sigma=0.001546 ! Fit after self-cal, rms=0.504869Jy sigma=0.001546 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.20 HN 0.96 KP 1.07 ! LA 0.97 MK 0.99 NL 1.15 OV 0.96 ! PT 1.00 SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.37 HN 1.03 KP 1.00 ! LA 0.94 MK 0.98 NL 1.42 OV 0.98 ! PT 0.98 SC 1.07 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.88 HN 1.03 KP 0.86 ! LA 0.76 MK 1.01 NL 1.78 OV 0.92 ! PT 0.97 SC 1.08 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.97 HN 0.98 KP 0.80 ! LA 0.80 MK 0.99 NL 1.04 OV 0.97 ! PT 1.01 SC 1.01 ! ! ! Fit before self-cal, rms=0.504869Jy sigma=0.001546 ! Fit after self-cal, rms=0.749940Jy sigma=0.001088 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.305 mas, bmaj=6.674 mas, bpa=-2.488 degrees ! Estimated noise=694.852 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00835914 Jy ! Component: 100 - total flux cleaned = 0.00960264 Jy ! Component: 150 - total flux cleaned = 0.00959631 Jy ! Component: 200 - total flux cleaned = 0.00944837 Jy ! Total flux subtracted in 200 components = 0.00944837 Jy ! Clean residual min=-0.019422 max=0.016826 Jy/beam ! Clean residual mean=-0.000112 rms=0.004404 Jy/beam ! Combined flux in latest and established models = 0.542791 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 41 components and 0.542791 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.747827Jy sigma=0.001092 ! Fit after self-cal, rms=0.747885Jy sigma=0.001092 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.747885Jy sigma=0.001092 ! Fit after self-cal, rms=0.262816Jy sigma=0.000797 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.318 mas, bmaj=6.666 mas, bpa=-2.483 degrees ! Estimated noise=694.828 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00358985 Jy ! Component: 100 - total flux cleaned = -0.00492528 Jy ! Component: 150 - total flux cleaned = -0.0051075 Jy ! Component: 200 - total flux cleaned = -0.00516198 Jy ! Total flux subtracted in 200 components = -0.00516198 Jy ! Clean residual min=-0.002686 max=0.002646 Jy/beam ! Clean residual mean=0.000004 rms=0.000650 Jy/beam ! Combined flux in latest and established models = 0.537629 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 50 components and 0.537629 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.262784Jy sigma=0.000795 ! Fit after self-cal, rms=0.262917Jy sigma=0.000794 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.79029e-06 Jy ! Component: 100 - total flux cleaned = 2.23111e-06 Jy ! Component: 150 - total flux cleaned = -3.46379e-05 Jy ! Component: 200 - total flux cleaned = -6.88916e-05 Jy ! Total flux subtracted in 200 components = -6.88916e-05 Jy ! Clean residual min=-0.002603 max=0.002660 Jy/beam ! Clean residual mean=0.000004 rms=0.000643 Jy/beam ! Combined flux in latest and established models = 0.53756 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 54 components and 0.53756 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.262898Jy sigma=0.000794 ! Fit after self-cal, rms=0.262894Jy sigma=0.000794 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.262894Jy sigma=0.000794 ! Fit after self-cal, rms=0.262276Jy sigma=0.000793 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.326 mas, bmaj=6.67 mas, bpa=-2.372 degrees ! Estimated noise=694.804 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00200445 Jy ! Component: 100 - total flux cleaned = -0.00282085 Jy ! Component: 150 - total flux cleaned = -0.00305178 Jy ! Component: 200 - total flux cleaned = -0.00314601 Jy ! Total flux subtracted in 200 components = -0.00314601 Jy ! Clean residual min=-0.002375 max=0.002778 Jy/beam ! Clean residual mean=0.000004 rms=0.000593 Jy/beam ! Combined flux in latest and established models = 0.534414 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 56 components and 0.534414 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.262270Jy sigma=0.000793 ! Fit after self-cal, rms=0.262269Jy sigma=0.000793 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (87, 68). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00142874 Jy ! Component: 100 - total flux cleaned = 0.00119031 Jy ! Component: 150 - total flux cleaned = 0.00123335 Jy ! Component: 200 - total flux cleaned = 0.00116256 Jy ! Total flux subtracted in 200 components = 0.00116256 Jy ! Clean residual min=-0.002334 max=0.002318 Jy/beam ! Clean residual mean=0.000004 rms=0.000577 Jy/beam ! Combined flux in latest and established models = 0.535576 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 74 components and 0.535576 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.262204Jy sigma=0.000792 ! Fit after self-cal, rms=0.262205Jy sigma=0.000792 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.262205Jy sigma=0.000792 ! Fit after self-cal, rms=0.261731Jy sigma=0.000792 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.163 mas, bmaj=10.22 mas, bpa=-2.988 degrees ! Estimated noise=881.322 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00119845 Jy ! Component: 100 - total flux cleaned = -0.00129421 Jy ! Component: 150 - total flux cleaned = -0.00141844 Jy ! Component: 200 - total flux cleaned = -0.00147819 Jy ! Total flux subtracted in 200 components = -0.00147819 Jy ! Clean residual min=-0.002335 max=0.002618 Jy/beam ! Clean residual mean=0.000010 rms=0.000616 Jy/beam ! Combined flux in latest and established models = 0.534098 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 89 components and 0.534098 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.261717Jy sigma=0.000792 ! Fit after self-cal, rms=0.261714Jy sigma=0.000792 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000118786 Jy ! Component: 100 - total flux cleaned = -5.08344e-05 Jy ! Component: 150 - total flux cleaned = -6.99605e-06 Jy ! Component: 200 - total flux cleaned = 5.50173e-06 Jy ! Total flux subtracted in 200 components = 5.50173e-06 Jy ! Clean residual min=-0.002335 max=0.002624 Jy/beam ! Clean residual mean=0.000011 rms=0.000619 Jy/beam ! Combined flux in latest and established models = 0.534103 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 104 components and 0.534103 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.261704Jy sigma=0.000792 ! Fit after self-cal, rms=0.261702Jy sigma=0.000792 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.331 mas, bmaj=6.675 mas, bpa=-2.294 degrees ! Estimated noise=694.592 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.331 x 6.675 at -2.294 degrees (North through East) ! Clean map min=-0.0021522 max=0.48298 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.859 mas, bmaj=5.795 mas, bpa=-2.86 degrees ! Estimated noise=978.401 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.370603 Jy ! Component: 100 - total flux cleaned = 0.456828 Jy ! Component: 150 - total flux cleaned = 0.491113 Jy ! Component: 200 - total flux cleaned = 0.508169 Jy ! Total flux subtracted in 200 components = 0.508169 Jy ! Clean residual min=-0.004243 max=0.008121 Jy/beam ! Clean residual mean=0.000007 rms=0.001224 Jy/beam ! Combined flux in latest and established models = 0.508169 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.508169 Jy ! Inverting map and beam ! Estimated beam: bmin=3.331 mas, bmaj=6.675 mas, bpa=-2.294 degrees ! Estimated noise=694.592 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0114666 Jy ! Component: 100 - total flux cleaned = 0.0173594 Jy ! Component: 150 - total flux cleaned = 0.0208661 Jy ! Component: 200 - total flux cleaned = 0.022763 Jy ! Total flux subtracted in 200 components = 0.022763 Jy ! Clean residual min=-0.002525 max=0.002333 Jy/beam ! Clean residual mean=0.000004 rms=0.000594 Jy/beam ! Combined flux in latest and established models = 0.530932 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 36 components and 0.530932 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.163 mas, bmaj=10.22 mas, bpa=-2.988 degrees ! Estimated noise=881.322 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000927282 Jy ! Component: 100 - total flux cleaned = 0.00152261 Jy ! Component: 150 - total flux cleaned = 0.00194127 Jy ! Component: 200 - total flux cleaned = 0.00226962 Jy ! Total flux subtracted in 200 components = 0.00226962 Jy ! Clean residual min=-0.002381 max=0.002607 Jy/beam ! Clean residual mean=0.000011 rms=0.000627 Jy/beam ! Combined flux in latest and established models = 0.533202 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000206368 Jy ! Component: 100 - total flux cleaned = 0.000295538 Jy ! Component: 150 - total flux cleaned = 0.000376952 Jy ! Component: 200 - total flux cleaned = 0.000436557 Jy ! Total flux subtracted in 200 components = 0.000436557 Jy ! Clean residual min=-0.002366 max=0.002615 Jy/beam ! Clean residual mean=0.000011 rms=0.000623 Jy/beam ! Combined flux in latest and established models = 0.533638 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 73 components and 0.533638 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.331 mas, bmaj=6.675 mas, bpa=-2.294 degrees ! Estimated noise=694.592 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.18514e-05 Jy ! Component: 100 - total flux cleaned = 7.88258e-05 Jy ! Component: 150 - total flux cleaned = 2.59376e-06 Jy ! Component: 200 - total flux cleaned = -6.98461e-05 Jy ! Total flux subtracted in 200 components = -6.98461e-05 Jy ! Clean residual min=-0.002322 max=0.002265 Jy/beam ! Clean residual mean=0.000005 rms=0.000561 Jy/beam ! Combined flux in latest and established models = 0.533569 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 85 components and 0.533569 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.261699Jy sigma=0.000792 ! Fit after self-cal, rms=0.261705Jy sigma=0.000792 wmodel J1642+2523_S_2015_01_23_pus_map.mod ! Writing 85 model components to file: J1642+2523_S_2015_01_23_pus_map.mod wobs J1642+2523_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J1642+2523_S_2015_01_23_pus_uvs.fits wwins J1642+2523_S_2015_01_23_pus_map.win ! wwins: Wrote 2 windows to J1642+2523_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000378827 Jy ! Component: 100 - total flux cleaned = -0.00045971 Jy ! Component: 150 - total flux cleaned = -0.000422796 Jy ! Component: 200 - total flux cleaned = -0.000385708 Jy ! Component: 250 - total flux cleaned = -0.000349702 Jy ! Component: 300 - total flux cleaned = -0.000314704 Jy ! Component: 350 - total flux cleaned = -0.000247876 Jy ! Component: 400 - total flux cleaned = -0.000279986 Jy ! Component: 450 - total flux cleaned = -0.000216204 Jy ! Component: 500 - total flux cleaned = -9.25587e-05 Jy ! Component: 550 - total flux cleaned = -3.17338e-05 Jy ! Component: 600 - total flux cleaned = 2.86006e-05 Jy ! Component: 650 - total flux cleaned = 8.85627e-05 Jy ! Component: 700 - total flux cleaned = 0.000233689 Jy ! Component: 750 - total flux cleaned = 0.000118983 Jy ! Component: 800 - total flux cleaned = 9.10481e-05 Jy ! Component: 850 - total flux cleaned = 7.42417e-06 Jy ! Component: 900 - total flux cleaned = -4.76192e-05 Jy ! Component: 950 - total flux cleaned = -0.000156039 Jy ! Component: 1000 - total flux cleaned = -0.000209567 Jy ! Component: 1050 - total flux cleaned = -0.000316145 Jy ! Component: 1100 - total flux cleaned = -0.000447326 Jy ! Component: 1150 - total flux cleaned = -0.000550799 Jy ! Component: 1200 - total flux cleaned = -0.00070433 Jy ! Component: 1250 - total flux cleaned = -0.000805639 Jy ! Component: 1300 - total flux cleaned = -0.000880671 Jy ! Component: 1350 - total flux cleaned = -0.000905046 Jy ! Component: 1400 - total flux cleaned = -0.00092966 Jy ! Component: 1450 - total flux cleaned = -0.000954187 Jy ! Component: 1500 - total flux cleaned = -0.000930462 Jy ! Component: 1550 - total flux cleaned = -0.000978375 Jy ! Component: 1600 - total flux cleaned = -0.000978393 Jy ! Component: 1650 - total flux cleaned = -0.00111934 Jy ! Component: 1700 - total flux cleaned = -0.00114279 Jy ! Component: 1750 - total flux cleaned = -0.00123525 Jy ! Component: 1800 - total flux cleaned = -0.00130417 Jy ! Component: 1850 - total flux cleaned = -0.00130406 Jy ! Component: 1900 - total flux cleaned = -0.00134906 Jy ! Component: 1950 - total flux cleaned = -0.00137155 Jy ! Component: 2000 - total flux cleaned = -0.0014382 Jy ! Component: 2050 - total flux cleaned = -0.00148236 Jy ! Component: 2100 - total flux cleaned = -0.00150411 Jy ! Component: 2150 - total flux cleaned = -0.00143877 Jy ! Component: 2200 - total flux cleaned = -0.00146051 Jy ! Component: 2250 - total flux cleaned = -0.00146048 Jy ! Component: 2300 - total flux cleaned = -0.00150351 Jy ! Component: 2350 - total flux cleaned = -0.00146114 Jy ! Component: 2400 - total flux cleaned = -0.00150351 Jy ! Component: 2450 - total flux cleaned = -0.00144039 Jy ! Component: 2500 - total flux cleaned = -0.00144029 Jy ! Component: 2550 - total flux cleaned = -0.00144006 Jy ! Component: 2600 - total flux cleaned = -0.00137824 Jy ! Component: 2650 - total flux cleaned = -0.00139861 Jy ! Component: 2700 - total flux cleaned = -0.00135774 Jy ! Component: 2750 - total flux cleaned = -0.00125639 Jy ! Component: 2800 - total flux cleaned = -0.00129673 Jy ! Component: 2850 - total flux cleaned = -0.0012565 Jy ! Component: 2900 - total flux cleaned = -0.00119666 Jy ! Component: 2950 - total flux cleaned = -0.00113707 Jy ! Component: 3000 - total flux cleaned = -0.00117674 Jy ! Component: 3050 - total flux cleaned = -0.0010588 Jy ! Component: 3100 - total flux cleaned = -0.00105873 Jy ! Component: 3150 - total flux cleaned = -0.00111699 Jy ! Component: 3200 - total flux cleaned = -0.00107828 Jy ! Component: 3250 - total flux cleaned = -0.00102033 Jy ! Component: 3300 - total flux cleaned = -0.000962827 Jy ! Component: 3350 - total flux cleaned = -0.000848447 Jy ! Component: 3400 - total flux cleaned = -0.000848416 Jy ! Component: 3450 - total flux cleaned = -0.000735127 Jy ! Component: 3500 - total flux cleaned = -0.000735021 Jy ! Component: 3550 - total flux cleaned = -0.000678984 Jy ! Component: 3600 - total flux cleaned = -0.000660325 Jy ! Component: 3650 - total flux cleaned = -0.000586246 Jy ! Component: 3700 - total flux cleaned = -0.000549396 Jy ! Component: 3750 - total flux cleaned = -0.00047584 Jy ! Component: 3800 - total flux cleaned = -0.000420909 Jy ! Component: 3850 - total flux cleaned = -0.000348072 Jy ! Component: 3900 - total flux cleaned = -0.000330029 Jy ! Component: 3950 - total flux cleaned = -0.000275948 Jy ! Component: 4000 - total flux cleaned = -0.000186129 Jy ! Component: 4050 - total flux cleaned = -0.000168272 Jy ! Total flux subtracted in 4096 components = -0.000168342 Jy ! Clean residual min=-0.001187 max=0.000994 Jy/beam ! Clean residual mean=0.000001 rms=0.000328 Jy/beam ! Combined flux in latest and established models = 0.5334 Jy keep ! Adding 289 model components to the UV plane model. ! The established model now contains 374 components and 0.5334 Jy ![Exited script file: muppet] wmap "J1642+2523_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.331 x 6.675 at -2.294 degrees (North through East) ! Clean map min=-0.001843 max=0.48339 Jy/beam ! Writing clean map to FITS file: J1642+2523_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.483386 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000325494 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.202009 0.202009 0.404018 0.808035 1.61607 3.23214 6.46428 12.9286 25.8571 51.7143 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.483 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.331 x 6.675 at -2.294 degrees (North through East) ! Clean map min=-0.001843 max=0.48339 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1642+2523_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 19:30:05 2017