! Started logfile: J1641+2257_S_2015_01_22_pus_uvs.log on Tue Jan 3 22:59:37 2017 obs J1641+2257_S_2015_01_22_pus_uva.fits ! Reading UV FITS file: J1641+2257_S_2015_01_22_pus_uva.fits ! AN table 1: 16 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.466667 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1641+2257 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 281 lines of history. ! ! Reading 1344 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1641+2257_S_2015_01_22_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.593854Jy sigma=0.007205 ! Fit after self-cal, rms=0.583570Jy sigma=0.007084 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.534 mas, bmaj=7.956 mas, bpa=22.87 degrees ! Estimated noise=1922.11 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.317327 Jy ! Component: 100 - total flux cleaned = 0.388031 Jy ! Total flux subtracted in 100 components = 0.388031 Jy ! Clean residual min=-0.015840 max=0.025550 Jy/beam ! Clean residual mean=0.000052 rms=0.005753 Jy/beam ! Combined flux in latest and established models = 0.388031 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.388031 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099955Jy sigma=0.001062 ! Fit after self-cal, rms=0.099956Jy sigma=0.001062 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.088 mas, bmaj=8.403 mas, bpa=22.12 degrees ! Estimated noise=1632.97 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0334105 Jy ! Component: 100 - total flux cleaned = 0.0474372 Jy ! Component: 150 - total flux cleaned = 0.055602 Jy ! Component: 200 - total flux cleaned = 0.0610622 Jy ! Total flux subtracted in 200 components = 0.0610622 Jy ! Clean residual min=-0.011036 max=0.012803 Jy/beam ! Clean residual mean=-0.000000 rms=0.003193 Jy/beam ! Combined flux in latest and established models = 0.449093 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 45 components and 0.449093 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087117Jy sigma=0.000944 ! Fit after self-cal, rms=0.087131Jy sigma=0.000944 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00* HN 1.00* KP 1.09 ! LA 1.11 MK 1.01 NL 1.00* OV 0.99 ! PT 1.05 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00* HN 1.00* KP 1.02 ! LA 1.06 MK 1.02 NL 1.00* OV 1.01 ! PT 1.05 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.00* HN 1.00* KP 0.86 ! LA 0.84 MK 1.02 NL 1.00* OV 0.92 ! PT 1.04 SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.00* HN 1.00* KP 0.82 ! LA 0.90 MK 1.01 NL 1.00* OV 0.97 ! PT 1.06 SC 0.98 ! ! ! Fit before self-cal, rms=0.087131Jy sigma=0.000944 ! Fit after self-cal, rms=0.066696Jy sigma=0.000758 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.103 mas, bmaj=8.456 mas, bpa=22.15 degrees ! Estimated noise=1627.59 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000785358 Jy ! Component: 100 - total flux cleaned = 0.000891432 Jy ! Component: 150 - total flux cleaned = 0.000950414 Jy ! Component: 200 - total flux cleaned = 0.000978392 Jy ! Total flux subtracted in 200 components = 0.000978392 Jy ! Clean residual min=-0.004717 max=0.005335 Jy/beam ! Clean residual mean=0.000001 rms=0.001139 Jy/beam ! Combined flux in latest and established models = 0.450071 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 55 components and 0.450071 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066662Jy sigma=0.000758 ! Fit after self-cal, rms=0.066640Jy sigma=0.000758 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066640Jy sigma=0.000758 ! Fit after self-cal, rms=0.066702Jy sigma=0.000757 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.104 mas, bmaj=8.456 mas, bpa=22.17 degrees ! Estimated noise=1628.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000368793 Jy ! Component: 100 - total flux cleaned = 0.000393154 Jy ! Component: 150 - total flux cleaned = 0.000438503 Jy ! Component: 200 - total flux cleaned = 0.000438569 Jy ! Total flux subtracted in 200 components = 0.000438569 Jy ! Clean residual min=-0.004677 max=0.005187 Jy/beam ! Clean residual mean=0.000001 rms=0.001119 Jy/beam ! Combined flux in latest and established models = 0.45051 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 56 components and 0.45051 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066681Jy sigma=0.000757 ! Fit after self-cal, rms=0.066683Jy sigma=0.000757 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-108, -103.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0029976 Jy ! Component: 100 - total flux cleaned = 0.00339785 Jy ! Component: 150 - total flux cleaned = 0.00332189 Jy ! Component: 200 - total flux cleaned = 0.00326998 Jy ! Total flux subtracted in 200 components = 0.00326998 Jy ! Clean residual min=-0.003799 max=0.003233 Jy/beam ! Clean residual mean=-0.000002 rms=0.000874 Jy/beam ! Combined flux in latest and established models = 0.45378 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 79 components and 0.45378 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066351Jy sigma=0.000753 ! Fit after self-cal, rms=0.066341Jy sigma=0.000753 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066341Jy sigma=0.000753 ! Fit after self-cal, rms=0.066283Jy sigma=0.000753 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.107 mas, bmaj=8.457 mas, bpa=22.18 degrees ! Estimated noise=1627.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.64661e-05 Jy ! Component: 100 - total flux cleaned = 2.90989e-05 Jy ! Component: 150 - total flux cleaned = 7.3828e-05 Jy ! Component: 200 - total flux cleaned = 7.1571e-05 Jy ! Total flux subtracted in 200 components = 7.1571e-05 Jy ! Clean residual min=-0.003566 max=0.003146 Jy/beam ! Clean residual mean=-0.000003 rms=0.000827 Jy/beam ! Combined flux in latest and established models = 0.453851 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 88 components and 0.453851 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066214Jy sigma=0.000752 ! Fit after self-cal, rms=0.066212Jy sigma=0.000752 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.13623e-05 Jy ! Component: 100 - total flux cleaned = -6.25867e-05 Jy ! Component: 150 - total flux cleaned = -0.000161171 Jy ! Component: 200 - total flux cleaned = -0.000190841 Jy ! Total flux subtracted in 200 components = -0.000190841 Jy ! Clean residual min=-0.003388 max=0.003156 Jy/beam ! Clean residual mean=-0.000004 rms=0.000806 Jy/beam ! Combined flux in latest and established models = 0.45366 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 94 components and 0.45366 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066178Jy sigma=0.000752 ! Fit after self-cal, rms=0.066179Jy sigma=0.000752 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066179Jy sigma=0.000752 ! Fit after self-cal, rms=0.066148Jy sigma=0.000751 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.842 mas, bmaj=10.35 mas, bpa=1.911 degrees ! Estimated noise=2038.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000776513 Jy ! Component: 100 - total flux cleaned = -0.000998916 Jy ! Component: 150 - total flux cleaned = -0.0011146 Jy ! Component: 200 - total flux cleaned = -0.00121676 Jy ! Total flux subtracted in 200 components = -0.00121676 Jy ! Clean residual min=-0.003680 max=0.004203 Jy/beam ! Clean residual mean=-0.000006 rms=0.001079 Jy/beam ! Combined flux in latest and established models = 0.452443 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 103 components and 0.452443 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066135Jy sigma=0.000751 ! Fit after self-cal, rms=0.066136Jy sigma=0.000751 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000131634 Jy ! Component: 100 - total flux cleaned = -0.000225804 Jy ! Component: 150 - total flux cleaned = -0.000291359 Jy ! Component: 200 - total flux cleaned = -0.000352552 Jy ! Total flux subtracted in 200 components = -0.000352552 Jy ! Clean residual min=-0.003557 max=0.004143 Jy/beam ! Clean residual mean=-0.000006 rms=0.001069 Jy/beam ! Combined flux in latest and established models = 0.452091 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 110 components and 0.452091 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066130Jy sigma=0.000751 ! Fit after self-cal, rms=0.066132Jy sigma=0.000751 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.107 mas, bmaj=8.458 mas, bpa=22.18 degrees ! Estimated noise=1627.74 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.107 x 8.458 at 22.18 degrees (North through East) ! Clean map min=-0.003311 max=0.41381 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.541 mas, bmaj=8.032 mas, bpa=22.85 degrees ! Estimated noise=1936.67 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.31971 Jy ! Component: 100 - total flux cleaned = 0.390537 Jy ! Component: 150 - total flux cleaned = 0.415406 Jy ! Component: 200 - total flux cleaned = 0.427111 Jy ! Total flux subtracted in 200 components = 0.427111 Jy ! Clean residual min=-0.006952 max=0.007019 Jy/beam ! Clean residual mean=0.000019 rms=0.001834 Jy/beam ! Combined flux in latest and established models = 0.427111 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.427111 Jy ! Inverting map and beam ! Estimated beam: bmin=3.107 mas, bmaj=8.458 mas, bpa=22.18 degrees ! Estimated noise=1627.74 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0075829 Jy ! Component: 100 - total flux cleaned = 0.0112698 Jy ! Component: 150 - total flux cleaned = 0.0143776 Jy ! Component: 200 - total flux cleaned = 0.0166911 Jy ! Total flux subtracted in 200 components = 0.0166911 Jy ! Clean residual min=-0.005072 max=0.003781 Jy/beam ! Clean residual mean=0.000009 rms=0.001096 Jy/beam ! Combined flux in latest and established models = 0.443802 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 62 components and 0.443802 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.842 mas, bmaj=10.35 mas, bpa=1.911 degrees ! Estimated noise=2038.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00383945 Jy ! Component: 100 - total flux cleaned = 0.00537829 Jy ! Component: 150 - total flux cleaned = 0.00602004 Jy ! Component: 200 - total flux cleaned = 0.00629353 Jy ! Total flux subtracted in 200 components = 0.00629353 Jy ! Clean residual min=-0.004596 max=0.003705 Jy/beam ! Clean residual mean=0.000000 rms=0.001203 Jy/beam ! Combined flux in latest and established models = 0.450095 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000196526 Jy ! Component: 100 - total flux cleaned = 0.000375133 Jy ! Component: 150 - total flux cleaned = 0.000575372 Jy ! Component: 200 - total flux cleaned = 0.000717596 Jy ! Total flux subtracted in 200 components = 0.000717596 Jy ! Clean residual min=-0.004049 max=0.003759 Jy/beam ! Clean residual mean=-0.000001 rms=0.001115 Jy/beam ! Combined flux in latest and established models = 0.450813 Jy ! Adding 67 model components to the UV plane model. ! The established model now contains 120 components and 0.450813 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.107 mas, bmaj=8.458 mas, bpa=22.18 degrees ! Estimated noise=1627.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.52555e-06 Jy ! Component: 100 - total flux cleaned = -0.000123965 Jy ! Component: 150 - total flux cleaned = -7.36135e-05 Jy ! Component: 200 - total flux cleaned = 6.24552e-05 Jy ! Total flux subtracted in 200 components = 6.24552e-05 Jy ! Clean residual min=-0.003791 max=0.003197 Jy/beam ! Clean residual mean=-0.000001 rms=0.000807 Jy/beam ! Combined flux in latest and established models = 0.450875 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 137 components and 0.450875 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066170Jy sigma=0.000752 ! Fit after self-cal, rms=0.066165Jy sigma=0.000752 wmodel J1641+2257_S_2015_01_22_pus_map.mod ! Writing 137 model components to file: J1641+2257_S_2015_01_22_pus_map.mod wobs J1641+2257_S_2015_01_22_pus_uvs.fits ! Writing UV FITS file: J1641+2257_S_2015_01_22_pus_uvs.fits wwins J1641+2257_S_2015_01_22_pus_map.win ! wwins: Wrote 2 windows to J1641+2257_S_2015_01_22_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000456385 Jy ! Component: 100 - total flux cleaned = 6.9309e-05 Jy ! Component: 150 - total flux cleaned = 0.000491917 Jy ! Component: 200 - total flux cleaned = 0.000707727 Jy ! Component: 250 - total flux cleaned = 0.00110687 Jy ! Component: 300 - total flux cleaned = 0.00140642 Jy ! Component: 350 - total flux cleaned = 0.00176198 Jy ! Component: 400 - total flux cleaned = 0.00206566 Jy ! Component: 450 - total flux cleaned = 0.00242029 Jy ! Component: 500 - total flux cleaned = 0.00278887 Jy ! Component: 550 - total flux cleaned = 0.00305387 Jy ! Component: 600 - total flux cleaned = 0.00333628 Jy ! Component: 650 - total flux cleaned = 0.0036598 Jy ! Component: 700 - total flux cleaned = 0.00389215 Jy ! Component: 750 - total flux cleaned = 0.00404196 Jy ! Component: 800 - total flux cleaned = 0.00416318 Jy ! Component: 850 - total flux cleaned = 0.00430392 Jy ! Component: 900 - total flux cleaned = 0.00441766 Jy ! Component: 950 - total flux cleaned = 0.00450589 Jy ! Component: 1000 - total flux cleaned = 0.00459252 Jy ! Component: 1050 - total flux cleaned = 0.0046983 Jy ! Component: 1100 - total flux cleaned = 0.0048218 Jy ! Component: 1150 - total flux cleaned = 0.00490222 Jy ! Component: 1200 - total flux cleaned = 0.00502083 Jy ! Component: 1250 - total flux cleaned = 0.00515608 Jy ! Component: 1300 - total flux cleaned = 0.00526979 Jy ! Component: 1350 - total flux cleaned = 0.00536283 Jy ! Component: 1400 - total flux cleaned = 0.00545394 Jy ! Component: 1450 - total flux cleaned = 0.0054716 Jy ! Component: 1500 - total flux cleaned = 0.00547134 Jy ! Component: 1550 - total flux cleaned = 0.00545377 Jy ! Component: 1600 - total flux cleaned = 0.00543651 Jy ! Component: 1650 - total flux cleaned = 0.00541935 Jy ! Component: 1700 - total flux cleaned = 0.00533558 Jy ! Component: 1750 - total flux cleaned = 0.00531913 Jy ! Component: 1800 - total flux cleaned = 0.00528652 Jy ! Component: 1850 - total flux cleaned = 0.00522199 Jy ! Component: 1900 - total flux cleaned = 0.00512638 Jy ! Component: 1950 - total flux cleaned = 0.00504755 Jy ! Component: 2000 - total flux cleaned = 0.00501643 Jy ! Component: 2050 - total flux cleaned = 0.00493885 Jy ! Component: 2100 - total flux cleaned = 0.00483138 Jy ! Component: 2150 - total flux cleaned = 0.00477061 Jy ! Component: 2200 - total flux cleaned = 0.00471029 Jy ! Component: 2250 - total flux cleaned = 0.0046205 Jy ! Component: 2300 - total flux cleaned = 0.00456124 Jy ! Component: 2350 - total flux cleaned = 0.00448762 Jy ! Component: 2400 - total flux cleaned = 0.00438526 Jy ! Component: 2450 - total flux cleaned = 0.00424012 Jy ! Component: 2500 - total flux cleaned = 0.00418236 Jy ! Component: 2550 - total flux cleaned = 0.00402446 Jy ! Component: 2600 - total flux cleaned = 0.00386739 Jy ! Component: 2650 - total flux cleaned = 0.00376805 Jy ! Component: 2700 - total flux cleaned = 0.00362674 Jy ! Component: 2750 - total flux cleaned = 0.00348628 Jy ! Component: 2800 - total flux cleaned = 0.00337434 Jy ! Component: 2850 - total flux cleaned = 0.00320704 Jy ! Component: 2900 - total flux cleaned = 0.00305417 Jy ! Component: 2950 - total flux cleaned = 0.00291558 Jy ! Component: 3000 - total flux cleaned = 0.00276355 Jy ! Component: 3050 - total flux cleaned = 0.00263926 Jy ! Component: 3100 - total flux cleaned = 0.00251519 Jy ! Component: 3150 - total flux cleaned = 0.0023496 Jy ! Component: 3200 - total flux cleaned = 0.00222532 Jy ! Component: 3250 - total flux cleaned = 0.00207351 Jy ! Component: 3300 - total flux cleaned = 0.00199047 Jy ! Component: 3350 - total flux cleaned = 0.00186582 Jy ! Component: 3400 - total flux cleaned = 0.00176863 Jy ! Component: 3450 - total flux cleaned = 0.00164334 Jy ! Component: 3500 - total flux cleaned = 0.00153177 Jy ! Component: 3550 - total flux cleaned = 0.00143392 Jy ! Component: 3600 - total flux cleaned = 0.00132176 Jy ! Component: 3650 - total flux cleaned = 0.00119522 Jy ! Component: 3700 - total flux cleaned = 0.00108233 Jy ! Component: 3750 - total flux cleaned = 0.000983179 Jy ! Component: 3800 - total flux cleaned = 0.000954771 Jy ! Component: 3850 - total flux cleaned = 0.000826477 Jy ! Component: 3900 - total flux cleaned = 0.00076921 Jy ! Component: 3950 - total flux cleaned = 0.000668471 Jy ! Component: 4000 - total flux cleaned = 0.000567195 Jy ! Component: 4050 - total flux cleaned = 0.000509061 Jy ! Total flux subtracted in 4096 components = 0.000420892 Jy ! Clean residual min=-0.000936 max=0.000764 Jy/beam ! Clean residual mean=-0.000001 rms=0.000241 Jy/beam ! Combined flux in latest and established models = 0.451296 Jy keep ! Adding 227 model components to the UV plane model. ! The established model now contains 364 components and 0.451296 Jy ![Exited script file: muppet] wmap "J1641+2257_S_2015_01_22_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.107 x 8.458 at 22.18 degrees (North through East) ! Clean map min=-0.0025644 max=0.41436 Jy/beam ! Writing clean map to FITS file: J1641+2257_S_2015_01_22_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.41436 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000232504 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.168335 0.168335 0.33667 0.67334 1.34668 2.69336 5.38672 10.7734 21.5469 43.0938 86.1875 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.414 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.107 x 8.458 at 22.18 degrees (North through East) ! Clean map min=-0.0025644 max=0.41436 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1641+2257_S_2015_01_22_pus_uvs.log closed on Tue Jan 3 22:59:44 2017