! Started logfile: J1640-0011_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:31:43 2017 obs J1640-0011_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J1640-0011_S_2014_01_04_pus_uva.fits ! AN table 1: 98 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.5 visibilities/baseline/integration-bin. ! Found source: J1640-0011 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 7056 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1640-0011_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 245 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 245 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 245 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 245 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.909111Jy sigma=0.011899 ! Fit after self-cal, rms=0.875071Jy sigma=0.011490 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.64 mas, bmaj=5.664 mas, bpa=-0.3527 degrees ! Estimated noise=855.405 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0985337 Jy ! Component: 100 - total flux cleaned = 0.1224 Jy ! Total flux subtracted in 100 components = 0.1224 Jy ! Clean residual min=-0.006923 max=0.012134 Jy/beam ! Clean residual mean=0.000007 rms=0.002078 Jy/beam ! Combined flux in latest and established models = 0.1224 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.1224 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090712Jy sigma=0.000950 ! Fit after self-cal, rms=0.090589Jy sigma=0.000950 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.058 mas, bmaj=6.389 mas, bpa=-1.982 degrees ! Estimated noise=679.277 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.015015 Jy ! Component: 100 - total flux cleaned = 0.0230972 Jy ! Component: 150 - total flux cleaned = 0.0282711 Jy ! Component: 200 - total flux cleaned = 0.0317289 Jy ! Total flux subtracted in 200 components = 0.0317289 Jy ! Clean residual min=-0.004673 max=0.005492 Jy/beam ! Clean residual mean=0.000010 rms=0.001139 Jy/beam ! Combined flux in latest and established models = 0.154129 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 56 components and 0.154129 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087897Jy sigma=0.000912 ! Fit after self-cal, rms=0.088105Jy sigma=0.000912 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00* KP 1.00* LA 1.03 ! MK 1.03 NL 0.97 OV 0.95 PT 1.03 ! SC 1.06 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.00* KP 1.00* LA 0.99 ! MK 1.03 NL 1.07 OV 1.00 PT 0.94 ! SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.00* KP 1.00* LA 0.83 ! MK 1.03 NL 1.03 OV 0.92 PT 0.93 ! SC 0.97 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.00* KP 1.00* LA 0.87 ! MK 0.99 NL 1.10 OV 1.01 PT 0.99 ! SC 1.00 ! ! ! Fit before self-cal, rms=0.088105Jy sigma=0.000912 ! Fit after self-cal, rms=0.086305Jy sigma=0.000893 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.083 mas, bmaj=6.46 mas, bpa=-1.847 degrees ! Estimated noise=676.596 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000130607 Jy ! Component: 100 - total flux cleaned = 0.000288935 Jy ! Component: 150 - total flux cleaned = 0.000437246 Jy ! Component: 200 - total flux cleaned = 0.000577954 Jy ! Total flux subtracted in 200 components = 0.000577954 Jy ! Clean residual min=-0.004013 max=0.003639 Jy/beam ! Clean residual mean=0.000000 rms=0.000825 Jy/beam ! Combined flux in latest and established models = 0.154707 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 68 components and 0.154707 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086223Jy sigma=0.000893 ! Fit after self-cal, rms=0.086043Jy sigma=0.000893 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086043Jy sigma=0.000893 ! Fit after self-cal, rms=0.094128Jy sigma=0.000889 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.067 mas, bmaj=6.477 mas, bpa=-1.815 degrees ! Estimated noise=677.959 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000129996 Jy ! Component: 100 - total flux cleaned = 9.38668e-05 Jy ! Component: 150 - total flux cleaned = 9.40374e-05 Jy ! Component: 200 - total flux cleaned = 6.45723e-05 Jy ! Total flux subtracted in 200 components = 6.45723e-05 Jy ! Clean residual min=-0.002771 max=0.003155 Jy/beam ! Clean residual mean=-0.000002 rms=0.000669 Jy/beam ! Combined flux in latest and established models = 0.154771 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 80 components and 0.154771 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094100Jy sigma=0.000889 ! Fit after self-cal, rms=0.094351Jy sigma=0.000889 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-12.5, -27.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00131022 Jy ! Component: 100 - total flux cleaned = 0.000845451 Jy ! Component: 150 - total flux cleaned = 0.000761821 Jy ! Component: 200 - total flux cleaned = 0.000760054 Jy ! Total flux subtracted in 200 components = 0.000760054 Jy ! Clean residual min=-0.002295 max=0.002386 Jy/beam ! Clean residual mean=-0.000001 rms=0.000576 Jy/beam ! Combined flux in latest and established models = 0.155531 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 101 components and 0.155531 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094037Jy sigma=0.000887 ! Fit after self-cal, rms=0.094275Jy sigma=0.000887 ! Inverting map ! Added new window around map position (85.5, 127). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00122076 Jy ! Component: 100 - total flux cleaned = 0.00114713 Jy ! Component: 150 - total flux cleaned = 0.00114406 Jy ! Component: 200 - total flux cleaned = 0.00131322 Jy ! Total flux subtracted in 200 components = 0.00131322 Jy ! Clean residual min=-0.002326 max=0.002055 Jy/beam ! Clean residual mean=-0.000001 rms=0.000522 Jy/beam ! Combined flux in latest and established models = 0.156845 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 114 components and 0.156845 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094092Jy sigma=0.000886 ! Fit after self-cal, rms=0.094244Jy sigma=0.000886 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094244Jy sigma=0.000886 ! Fit after self-cal, rms=0.094443Jy sigma=0.000886 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.061 mas, bmaj=6.475 mas, bpa=-1.658 degrees ! Estimated noise=673.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000764276 Jy ! Component: 100 - total flux cleaned = 0.000874917 Jy ! Component: 150 - total flux cleaned = 0.000735762 Jy ! Component: 200 - total flux cleaned = 0.00082215 Jy ! Total flux subtracted in 200 components = 0.00082215 Jy ! Clean residual min=-0.002215 max=0.001946 Jy/beam ! Clean residual mean=-0.000002 rms=0.000484 Jy/beam ! Combined flux in latest and established models = 0.157667 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 128 components and 0.157667 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094338Jy sigma=0.000885 ! Fit after self-cal, rms=0.094457Jy sigma=0.000885 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.31158e-05 Jy ! Component: 100 - total flux cleaned = 0.000252789 Jy ! Component: 150 - total flux cleaned = 0.000290783 Jy ! Component: 200 - total flux cleaned = 0.000363609 Jy ! Total flux subtracted in 200 components = 0.000363609 Jy ! Clean residual min=-0.002213 max=0.001876 Jy/beam ! Clean residual mean=-0.000002 rms=0.000474 Jy/beam ! Combined flux in latest and established models = 0.15803 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 135 components and 0.15803 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094382Jy sigma=0.000885 ! Fit after self-cal, rms=0.094460Jy sigma=0.000885 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094460Jy sigma=0.000885 ! Fit after self-cal, rms=0.094751Jy sigma=0.000885 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.265 mas, bmaj=11.7 mas, bpa=8.886 degrees ! Estimated noise=807.068 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.27685e-05 Jy ! Component: 100 - total flux cleaned = 0.000225379 Jy ! Component: 150 - total flux cleaned = 0.000227474 Jy ! Component: 200 - total flux cleaned = 0.000245412 Jy ! Total flux subtracted in 200 components = 0.000245412 Jy ! Clean residual min=-0.001942 max=0.001817 Jy/beam ! Clean residual mean=-0.000004 rms=0.000500 Jy/beam ! Combined flux in latest and established models = 0.158276 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 146 components and 0.158276 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094735Jy sigma=0.000885 ! Fit after self-cal, rms=0.094776Jy sigma=0.000885 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.19026e-05 Jy ! Component: 100 - total flux cleaned = -0.000116519 Jy ! Component: 150 - total flux cleaned = -0.000185223 Jy ! Component: 200 - total flux cleaned = -0.000233684 Jy ! Total flux subtracted in 200 components = -0.000233684 Jy ! Clean residual min=-0.001790 max=0.001776 Jy/beam ! Clean residual mean=-0.000004 rms=0.000468 Jy/beam ! Combined flux in latest and established models = 0.158042 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 153 components and 0.158042 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094761Jy sigma=0.000885 ! Fit after self-cal, rms=0.094781Jy sigma=0.000885 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.063 mas, bmaj=6.476 mas, bpa=-1.575 degrees ! Estimated noise=673.52 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.063 x 6.476 at -1.575 degrees (North through East) ! Clean map min=-0.0041319 max=0.12826 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.628 mas, bmaj=5.711 mas, bpa=0.04514 degrees ! Estimated noise=859.804 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0988109 Jy ! Component: 100 - total flux cleaned = 0.123399 Jy ! Component: 150 - total flux cleaned = 0.134495 Jy ! Component: 200 - total flux cleaned = 0.141055 Jy ! Total flux subtracted in 200 components = 0.141055 Jy ! Clean residual min=-0.004333 max=0.004605 Jy/beam ! Clean residual mean=0.000001 rms=0.001011 Jy/beam ! Combined flux in latest and established models = 0.141055 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.141055 Jy ! Inverting map and beam ! Estimated beam: bmin=3.063 mas, bmaj=6.476 mas, bpa=-1.575 degrees ! Estimated noise=673.52 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (22, -8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00539893 Jy ! Component: 100 - total flux cleaned = 0.00805517 Jy ! Component: 150 - total flux cleaned = 0.0102323 Jy ! Component: 200 - total flux cleaned = 0.0111296 Jy ! Total flux subtracted in 200 components = 0.0111296 Jy ! Clean residual min=-0.003020 max=0.002711 Jy/beam ! Clean residual mean=0.000001 rms=0.000671 Jy/beam ! Combined flux in latest and established models = 0.152185 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 50 components and 0.152185 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.265 mas, bmaj=11.7 mas, bpa=8.886 degrees ! Estimated noise=807.068 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00218524 Jy ! Component: 100 - total flux cleaned = 0.0028592 Jy ! Component: 150 - total flux cleaned = 0.00324228 Jy ! Component: 200 - total flux cleaned = 0.003636 Jy ! Total flux subtracted in 200 components = 0.003636 Jy ! Clean residual min=-0.002018 max=0.001853 Jy/beam ! Clean residual mean=-0.000002 rms=0.000574 Jy/beam ! Combined flux in latest and established models = 0.155821 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000356715 Jy ! Component: 100 - total flux cleaned = 0.000678095 Jy ! Component: 150 - total flux cleaned = 0.000969806 Jy ! Component: 200 - total flux cleaned = 0.00110355 Jy ! Total flux subtracted in 200 components = 0.00110355 Jy ! Clean residual min=-0.001786 max=0.001581 Jy/beam ! Clean residual mean=-0.000003 rms=0.000510 Jy/beam ! Combined flux in latest and established models = 0.156924 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 86 components and 0.156924 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.063 mas, bmaj=6.476 mas, bpa=-1.575 degrees ! Estimated noise=673.52 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000274277 Jy ! Component: 100 - total flux cleaned = -0.000272202 Jy ! Component: 150 - total flux cleaned = -0.000200859 Jy ! Component: 200 - total flux cleaned = -0.000203274 Jy ! Total flux subtracted in 200 components = -0.000203274 Jy ! Clean residual min=-0.002355 max=0.002057 Jy/beam ! Clean residual mean=-0.000001 rms=0.000506 Jy/beam ! Combined flux in latest and established models = 0.156721 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 104 components and 0.156721 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095010Jy sigma=0.000885 ! Fit after self-cal, rms=0.094736Jy sigma=0.000885 wmodel J1640-0011_S_2014_01_04_pus_map.mod ! Writing 104 model components to file: J1640-0011_S_2014_01_04_pus_map.mod wobs J1640-0011_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J1640-0011_S_2014_01_04_pus_uvs.fits wwins J1640-0011_S_2014_01_04_pus_map.win ! wwins: Wrote 4 windows to J1640-0011_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000613422 Jy ! Component: 100 - total flux cleaned = -0.000717662 Jy ! Component: 150 - total flux cleaned = -0.000750365 Jy ! Component: 200 - total flux cleaned = -0.000780212 Jy ! Component: 250 - total flux cleaned = -0.000750472 Jy ! Component: 300 - total flux cleaned = -0.000806678 Jy ! Component: 350 - total flux cleaned = -0.000915309 Jy ! Component: 400 - total flux cleaned = -0.00102094 Jy ! Component: 450 - total flux cleaned = -0.00107235 Jy ! Component: 500 - total flux cleaned = -0.00112302 Jy ! Component: 550 - total flux cleaned = -0.00119693 Jy ! Component: 600 - total flux cleaned = -0.00122125 Jy ! Component: 650 - total flux cleaned = -0.00126818 Jy ! Component: 700 - total flux cleaned = -0.00126803 Jy ! Component: 750 - total flux cleaned = -0.00124522 Jy ! Component: 800 - total flux cleaned = -0.00128941 Jy ! Component: 850 - total flux cleaned = -0.00124581 Jy ! Component: 900 - total flux cleaned = -0.00116091 Jy ! Component: 950 - total flux cleaned = -0.00120294 Jy ! Component: 1000 - total flux cleaned = -0.0012033 Jy ! Component: 1050 - total flux cleaned = -0.00122364 Jy ! Component: 1100 - total flux cleaned = -0.00124352 Jy ! Component: 1150 - total flux cleaned = -0.00126311 Jy ! Component: 1200 - total flux cleaned = -0.00128215 Jy ! Component: 1250 - total flux cleaned = -0.001301 Jy ! Component: 1300 - total flux cleaned = -0.00135679 Jy ! Component: 1350 - total flux cleaned = -0.00133825 Jy ! Component: 1400 - total flux cleaned = -0.00135648 Jy ! Component: 1450 - total flux cleaned = -0.00135668 Jy ! Component: 1500 - total flux cleaned = -0.00142715 Jy ! Component: 1550 - total flux cleaned = -0.0014448 Jy ! Component: 1600 - total flux cleaned = -0.0014965 Jy ! Component: 1650 - total flux cleaned = -0.00149646 Jy ! Component: 1700 - total flux cleaned = -0.00153014 Jy ! Component: 1750 - total flux cleaned = -0.0015466 Jy ! Component: 1800 - total flux cleaned = -0.00154682 Jy ! Component: 1850 - total flux cleaned = -0.0016115 Jy ! Component: 1900 - total flux cleaned = -0.00161143 Jy ! Component: 1950 - total flux cleaned = -0.00165873 Jy ! Component: 2000 - total flux cleaned = -0.00169 Jy ! Component: 2050 - total flux cleaned = -0.00176719 Jy ! Component: 2100 - total flux cleaned = -0.00181291 Jy ! Component: 2150 - total flux cleaned = -0.001828 Jy ! Component: 2200 - total flux cleaned = -0.00188789 Jy ! Component: 2250 - total flux cleaned = -0.00196187 Jy ! Component: 2300 - total flux cleaned = -0.00199112 Jy ! Component: 2350 - total flux cleaned = -0.00202011 Jy ! Component: 2400 - total flux cleaned = -0.00206323 Jy ! Component: 2450 - total flux cleaned = -0.00212013 Jy ! Component: 2500 - total flux cleaned = -0.00214829 Jy ! Component: 2550 - total flux cleaned = -0.00220412 Jy ! Component: 2600 - total flux cleaned = -0.00223187 Jy ! Component: 2650 - total flux cleaned = -0.0022594 Jy ! Component: 2700 - total flux cleaned = -0.00231377 Jy ! Component: 2750 - total flux cleaned = -0.00232706 Jy ! Component: 2800 - total flux cleaned = -0.00239371 Jy ! Component: 2850 - total flux cleaned = -0.0024203 Jy ! Component: 2900 - total flux cleaned = -0.002473 Jy ! Component: 2950 - total flux cleaned = -0.00252514 Jy ! Component: 3000 - total flux cleaned = -0.00255103 Jy ! Component: 3050 - total flux cleaned = -0.00261519 Jy ! Component: 3100 - total flux cleaned = -0.00265332 Jy ! Component: 3150 - total flux cleaned = -0.00266604 Jy ! Component: 3200 - total flux cleaned = -0.00271627 Jy ! Component: 3250 - total flux cleaned = -0.00274124 Jy ! Component: 3300 - total flux cleaned = -0.00281536 Jy ! Component: 3350 - total flux cleaned = -0.00282758 Jy ! Component: 3400 - total flux cleaned = -0.00290057 Jy ! Component: 3450 - total flux cleaned = -0.00293679 Jy ! Component: 3500 - total flux cleaned = -0.00294878 Jy ! Component: 3550 - total flux cleaned = -0.00300826 Jy ! Component: 3600 - total flux cleaned = -0.00300843 Jy ! Component: 3650 - total flux cleaned = -0.00306712 Jy ! Component: 3700 - total flux cleaned = -0.00309041 Jy ! Component: 3750 - total flux cleaned = -0.00312509 Jy ! Component: 3800 - total flux cleaned = -0.00318262 Jy ! Component: 3850 - total flux cleaned = -0.00321697 Jy ! Component: 3900 - total flux cleaned = -0.00328511 Jy ! Component: 3950 - total flux cleaned = -0.00331901 Jy ! Component: 4000 - total flux cleaned = -0.00337508 Jy ! Component: 4050 - total flux cleaned = -0.0034309 Jy ! Total flux subtracted in 4096 components = -0.00347519 Jy ! Clean residual min=-0.000634 max=0.000645 Jy/beam ! Clean residual mean=-0.000001 rms=0.000190 Jy/beam ! Combined flux in latest and established models = 0.153246 Jy keep ! Adding 241 model components to the UV plane model. ! The established model now contains 343 components and 0.153246 Jy ![Exited script file: muppet] wmap "J1640-0011_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.063 x 6.476 at -1.575 degrees (North through East) ! Clean map min=-0.0034206 max=0.1288 Jy/beam ! Writing clean map to FITS file: J1640-0011_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.128798 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00019225 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.447795 0.447795 0.89559 1.79118 3.58236 7.16472 14.3294 28.6589 57.3178 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.128 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.063 x 6.476 at -1.575 degrees (North through East) ! Clean map min=-0.0034206 max=0.1288 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1640-0011_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:31:47 2017