! Started logfile: J1639+8631_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:31:38 2017 obs J1639+8631_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J1639+8631_S_2014_01_04_pus_uva.fits ! AN table 1: 126 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.680556 visibilities/baseline/integration-bin. ! Found source: J1639+8631 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 12348 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1639+8631_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 189 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 189 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 189 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 189 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.980121Jy sigma=0.013202 ! Fit after self-cal, rms=0.899365Jy sigma=0.011781 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.362 mas, bmaj=10.46 mas, bpa=54.13 degrees ! Estimated noise=961.742 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0760314 Jy ! Component: 100 - total flux cleaned = 0.113934 Jy ! Total flux subtracted in 100 components = 0.113934 Jy ! Clean residual min=-0.013959 max=0.020071 Jy/beam ! Clean residual mean=-0.000170 rms=0.004883 Jy/beam ! Combined flux in latest and established models = 0.113935 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.113935 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124628Jy sigma=0.001518 ! Fit after self-cal, rms=0.124200Jy sigma=0.001512 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.089 mas, bmaj=11.34 mas, bpa=54.37 degrees ! Estimated noise=506.56 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0442408 Jy ! Component: 100 - total flux cleaned = 0.0718152 Jy ! Component: 150 - total flux cleaned = 0.0913302 Jy ! Component: 200 - total flux cleaned = 0.106834 Jy ! Total flux subtracted in 200 components = 0.106834 Jy ! Clean residual min=-0.016494 max=0.022734 Jy/beam ! Clean residual mean=-0.000341 rms=0.006953 Jy/beam ! Combined flux in latest and established models = 0.220768 Jy ! Performing phase self-cal ! Adding 91 model components to the UV plane model. ! The established model now contains 103 components and 0.220768 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106037Jy sigma=0.001211 ! Fit after self-cal, rms=0.105394Jy sigma=0.001205 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 1.20 KP 1.00* LA 0.79 ! MK 1.10 NL 1.08 OV 0.98 PT 0.79 ! SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.19 FD 1.45 KP 1.00* LA 0.77 ! MK 1.06 NL 1.13 OV 0.99 PT 0.78 ! SC 0.91 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.67 KP 1.00* LA 0.62 ! MK 1.13 NL 1.08 OV 0.95 PT 0.77 ! SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.28 FD 1.41 KP 1.00* LA 0.68 ! MK 1.12 NL 1.16 OV 1.01 PT 0.82 ! SC 0.91 ! ! ! Fit before self-cal, rms=0.105394Jy sigma=0.001205 ! Fit after self-cal, rms=0.092759Jy sigma=0.001091 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.173 mas, bmaj=11.44 mas, bpa=54.01 degrees ! Estimated noise=488.416 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (18, 28). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0212014 Jy ! Component: 100 - total flux cleaned = 0.0319862 Jy ! Component: 150 - total flux cleaned = 0.0372247 Jy ! Component: 200 - total flux cleaned = 0.0404771 Jy ! Total flux subtracted in 200 components = 0.0404771 Jy ! Clean residual min=-0.008508 max=0.014430 Jy/beam ! Clean residual mean=-0.000044 rms=0.002947 Jy/beam ! Combined flux in latest and established models = 0.261245 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 141 components and 0.261245 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088245Jy sigma=0.000992 ! Fit after self-cal, rms=0.087863Jy sigma=0.000981 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087863Jy sigma=0.000981 ! Fit after self-cal, rms=0.084858Jy sigma=0.000963 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.15 mas, bmaj=11.42 mas, bpa=54.17 degrees ! Estimated noise=477.241 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00660593 Jy ! Component: 100 - total flux cleaned = 0.00778056 Jy ! Component: 150 - total flux cleaned = 0.00846404 Jy ! Component: 200 - total flux cleaned = 0.0087691 Jy ! Total flux subtracted in 200 components = 0.0087691 Jy ! Clean residual min=-0.007515 max=0.011531 Jy/beam ! Clean residual mean=-0.000059 rms=0.002120 Jy/beam ! Combined flux in latest and established models = 0.270014 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 175 components and 0.270014 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083916Jy sigma=0.000947 ! Fit after self-cal, rms=0.083933Jy sigma=0.000946 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (24, 45). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00993112 Jy ! Component: 100 - total flux cleaned = 0.0134006 Jy ! Component: 150 - total flux cleaned = 0.0142609 Jy ! Component: 200 - total flux cleaned = 0.0153057 Jy ! Total flux subtracted in 200 components = 0.0153057 Jy ! Clean residual min=-0.006228 max=0.006564 Jy/beam ! Clean residual mean=-0.000037 rms=0.001556 Jy/beam ! Combined flux in latest and established models = 0.28532 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 213 components and 0.28532 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082422Jy sigma=0.000925 ! Fit after self-cal, rms=0.082369Jy sigma=0.000924 ! Inverting map ! Added new window around map position (10, -12.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00480463 Jy ! Component: 100 - total flux cleaned = 0.0052758 Jy ! Component: 150 - total flux cleaned = 0.00541648 Jy ! Component: 200 - total flux cleaned = 0.00541406 Jy ! Total flux subtracted in 200 components = 0.00541406 Jy ! Clean residual min=-0.005465 max=0.004314 Jy/beam ! Clean residual mean=-0.000023 rms=0.001320 Jy/beam ! Combined flux in latest and established models = 0.290734 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 248 components and 0.290734 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081679Jy sigma=0.000915 ! Fit after self-cal, rms=0.081699Jy sigma=0.000914 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081699Jy sigma=0.000914 ! Fit after self-cal, rms=0.080063Jy sigma=0.000911 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.129 mas, bmaj=11.44 mas, bpa=54.2 degrees ! Estimated noise=470.766 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00372647 Jy ! Component: 100 - total flux cleaned = 0.00577188 Jy ! Component: 150 - total flux cleaned = 0.00651473 Jy ! Component: 200 - total flux cleaned = 0.006807 Jy ! Total flux subtracted in 200 components = 0.006807 Jy ! Clean residual min=-0.004020 max=0.003734 Jy/beam ! Clean residual mean=-0.000005 rms=0.001085 Jy/beam ! Combined flux in latest and established models = 0.297541 Jy selfcal ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 282 components and 0.297541 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079673Jy sigma=0.000907 ! Fit after self-cal, rms=0.079799Jy sigma=0.000907 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00083818 Jy ! Component: 100 - total flux cleaned = 0.001207 Jy ! Component: 150 - total flux cleaned = 0.0015491 Jy ! Component: 200 - total flux cleaned = 0.0017071 Jy ! Total flux subtracted in 200 components = 0.0017071 Jy ! Clean residual min=-0.003794 max=0.003751 Jy/beam ! Clean residual mean=-0.000004 rms=0.001023 Jy/beam ! Combined flux in latest and established models = 0.299248 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 294 components and 0.299248 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079564Jy sigma=0.000904 ! Fit after self-cal, rms=0.079579Jy sigma=0.000904 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079579Jy sigma=0.000904 ! Fit after self-cal, rms=0.078605Jy sigma=0.000904 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.413 mas, bmaj=13.93 mas, bpa=61.56 degrees ! Estimated noise=533.139 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00264614 Jy ! Component: 100 - total flux cleaned = 0.00383661 Jy ! Component: 150 - total flux cleaned = 0.00431123 Jy ! Component: 200 - total flux cleaned = 0.00457463 Jy ! Total flux subtracted in 200 components = 0.00457463 Jy ! Clean residual min=-0.005418 max=0.004176 Jy/beam ! Clean residual mean=-0.000010 rms=0.001465 Jy/beam ! Combined flux in latest and established models = 0.303823 Jy selfcal ! Performing phase self-cal ! Adding 75 model components to the UV plane model. ! The established model now contains 361 components and 0.303823 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078457Jy sigma=0.000902 ! Fit after self-cal, rms=0.078454Jy sigma=0.000902 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000637857 Jy ! Component: 100 - total flux cleaned = 0.00102663 Jy ! Component: 150 - total flux cleaned = 0.00109793 Jy ! Component: 200 - total flux cleaned = 0.00109814 Jy ! Total flux subtracted in 200 components = 0.00109814 Jy ! Clean residual min=-0.005046 max=0.004154 Jy/beam ! Clean residual mean=-0.000009 rms=0.001362 Jy/beam ! Combined flux in latest and established models = 0.304921 Jy ! Performing phase self-cal ! Adding 60 model components to the UV plane model. ! The established model now contains 400 components and 0.304921 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078364Jy sigma=0.000901 ! Fit after self-cal, rms=0.078370Jy sigma=0.000901 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.114 mas, bmaj=11.43 mas, bpa=54.18 degrees ! Estimated noise=469.055 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.114 x 11.43 at 54.18 degrees (North through East) ! Clean map min=-0.0037669 max=0.096276 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.362 mas, bmaj=10.43 mas, bpa=54.05 degrees ! Estimated noise=889.764 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0704944 Jy ! Component: 100 - total flux cleaned = 0.107004 Jy ! Component: 150 - total flux cleaned = 0.130902 Jy ! Component: 200 - total flux cleaned = 0.149131 Jy ! Total flux subtracted in 200 components = 0.149131 Jy ! Clean residual min=-0.009781 max=0.012670 Jy/beam ! Clean residual mean=-0.000100 rms=0.003078 Jy/beam ! Combined flux in latest and established models = 0.149131 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 42 model components to the UV plane model. ! The established model now contains 42 components and 0.149131 Jy ! Inverting map and beam ! Estimated beam: bmin=3.114 mas, bmaj=11.43 mas, bpa=54.18 degrees ! Estimated noise=469.055 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0266008 Jy ! Component: 100 - total flux cleaned = 0.0465163 Jy ! Component: 150 - total flux cleaned = 0.0624504 Jy ! Component: 200 - total flux cleaned = 0.0756427 Jy ! Total flux subtracted in 200 components = 0.0756427 Jy ! Clean residual min=-0.009952 max=0.009819 Jy/beam ! Clean residual mean=-0.000162 rms=0.003267 Jy/beam ! Combined flux in latest and established models = 0.224774 Jy ! Adding 72 model components to the UV plane model. ! The established model now contains 101 components and 0.224774 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.413 mas, bmaj=13.93 mas, bpa=61.56 degrees ! Estimated noise=533.139 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.018722 Jy ! Component: 100 - total flux cleaned = 0.0326256 Jy ! Component: 150 - total flux cleaned = 0.0434459 Jy ! Component: 200 - total flux cleaned = 0.0519825 Jy ! Total flux subtracted in 200 components = 0.0519825 Jy ! Clean residual min=-0.009349 max=0.007618 Jy/beam ! Clean residual mean=-0.000137 rms=0.002689 Jy/beam ! Combined flux in latest and established models = 0.276757 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00679472 Jy ! Component: 100 - total flux cleaned = 0.0122617 Jy ! Component: 150 - total flux cleaned = 0.0166977 Jy ! Component: 200 - total flux cleaned = 0.0203154 Jy ! Total flux subtracted in 200 components = 0.0203154 Jy ! Clean residual min=-0.006591 max=0.004351 Jy/beam ! Clean residual mean=-0.000062 rms=0.001597 Jy/beam ! Combined flux in latest and established models = 0.297072 Jy ! Adding 151 model components to the UV plane model. ! The established model now contains 234 components and 0.297072 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.114 mas, bmaj=11.43 mas, bpa=54.18 degrees ! Estimated noise=469.055 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00111334 Jy ! Component: 100 - total flux cleaned = 0.00243421 Jy ! Component: 150 - total flux cleaned = 0.00326696 Jy ! Component: 200 - total flux cleaned = 0.00382847 Jy ! Total flux subtracted in 200 components = 0.00382847 Jy ! Clean residual min=-0.003778 max=0.003319 Jy/beam ! Clean residual mean=-0.000021 rms=0.000954 Jy/beam ! Combined flux in latest and established models = 0.300901 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 262 components and 0.300901 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078595Jy sigma=0.000904 ! Fit after self-cal, rms=0.078385Jy sigma=0.000902 wmodel J1639+8631_S_2014_01_04_pus_map.mod ! Writing 262 model components to file: J1639+8631_S_2014_01_04_pus_map.mod wobs J1639+8631_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J1639+8631_S_2014_01_04_pus_uvs.fits wwins J1639+8631_S_2014_01_04_pus_map.win ! wwins: Wrote 4 windows to J1639+8631_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00123734 Jy ! Component: 100 - total flux cleaned = -0.00206403 Jy ! Component: 150 - total flux cleaned = -0.00271112 Jy ! Component: 200 - total flux cleaned = -0.00347232 Jy ! Component: 250 - total flux cleaned = -0.00409747 Jy ! Component: 300 - total flux cleaned = -0.00473697 Jy ! Component: 350 - total flux cleaned = -0.00530296 Jy ! Component: 400 - total flux cleaned = -0.00572077 Jy ! Component: 450 - total flux cleaned = -0.00616228 Jy ! Component: 500 - total flux cleaned = -0.00658778 Jy ! Component: 550 - total flux cleaned = -0.00707252 Jy ! Component: 600 - total flux cleaned = -0.00732461 Jy ! Component: 650 - total flux cleaned = -0.00746431 Jy ! Component: 700 - total flux cleaned = -0.00756649 Jy ! Component: 750 - total flux cleaned = -0.00769797 Jy ! Component: 800 - total flux cleaned = -0.0076661 Jy ! Component: 850 - total flux cleaned = -0.00772902 Jy ! Component: 900 - total flux cleaned = -0.00781867 Jy ! Component: 950 - total flux cleaned = -0.00778956 Jy ! Component: 1000 - total flux cleaned = -0.00787525 Jy ! Component: 1050 - total flux cleaned = -0.00793093 Jy ! Component: 1100 - total flux cleaned = -0.00795786 Jy ! Component: 1150 - total flux cleaned = -0.00798431 Jy ! Component: 1200 - total flux cleaned = -0.00800951 Jy ! Component: 1250 - total flux cleaned = -0.008009 Jy ! Component: 1300 - total flux cleaned = -0.00810638 Jy ! Component: 1350 - total flux cleaned = -0.00815374 Jy ! Component: 1400 - total flux cleaned = -0.00824797 Jy ! Component: 1450 - total flux cleaned = -0.00831701 Jy ! Component: 1500 - total flux cleaned = -0.00847405 Jy ! Component: 1550 - total flux cleaned = -0.0085182 Jy ! Component: 1600 - total flux cleaned = -0.00862656 Jy ! Component: 1650 - total flux cleaned = -0.00875454 Jy ! Component: 1700 - total flux cleaned = -0.00894244 Jy ! Component: 1750 - total flux cleaned = -0.00906578 Jy ! Component: 1800 - total flux cleaned = -0.00918691 Jy ! Component: 1850 - total flux cleaned = -0.00930602 Jy ! Component: 1900 - total flux cleaned = -0.00936448 Jy ! Component: 1950 - total flux cleaned = -0.00944162 Jy ! Component: 2000 - total flux cleaned = -0.00953616 Jy ! Component: 2050 - total flux cleaned = -0.00955483 Jy ! Component: 2100 - total flux cleaned = -0.00968338 Jy ! Component: 2150 - total flux cleaned = -0.00971925 Jy ! Component: 2200 - total flux cleaned = -0.0097733 Jy ! Component: 2250 - total flux cleaned = -0.00984384 Jy ! Component: 2300 - total flux cleaned = -0.00991331 Jy ! Component: 2350 - total flux cleaned = -0.00991323 Jy ! Component: 2400 - total flux cleaned = -0.00996401 Jy ! Component: 2450 - total flux cleaned = -0.00998061 Jy ! Component: 2500 - total flux cleaned = -0.00999709 Jy ! Component: 2550 - total flux cleaned = -0.0100134 Jy ! Component: 2600 - total flux cleaned = -0.0100137 Jy ! Component: 2650 - total flux cleaned = -0.0100926 Jy ! Component: 2700 - total flux cleaned = -0.0100611 Jy ! Component: 2750 - total flux cleaned = -0.0100611 Jy ! Component: 2800 - total flux cleaned = -0.0100916 Jy ! Component: 2850 - total flux cleaned = -0.010137 Jy ! Component: 2900 - total flux cleaned = -0.0101668 Jy ! Component: 2950 - total flux cleaned = -0.0101816 Jy ! Component: 3000 - total flux cleaned = -0.0102255 Jy ! Component: 3050 - total flux cleaned = -0.0102399 Jy ! Component: 3100 - total flux cleaned = -0.01024 Jy ! Component: 3150 - total flux cleaned = -0.0102685 Jy ! Component: 3200 - total flux cleaned = -0.0102544 Jy ! Component: 3250 - total flux cleaned = -0.0102406 Jy ! Component: 3300 - total flux cleaned = -0.010213 Jy ! Component: 3350 - total flux cleaned = -0.0102269 Jy ! Component: 3400 - total flux cleaned = -0.0101999 Jy ! Component: 3450 - total flux cleaned = -0.0101865 Jy ! Component: 3500 - total flux cleaned = -0.0101466 Jy ! Component: 3550 - total flux cleaned = -0.0101732 Jy ! Component: 3600 - total flux cleaned = -0.0101208 Jy ! Component: 3650 - total flux cleaned = -0.0101469 Jy ! Component: 3700 - total flux cleaned = -0.0101211 Jy ! Component: 3750 - total flux cleaned = -0.0101467 Jy ! Component: 3800 - total flux cleaned = -0.0100958 Jy ! Component: 3850 - total flux cleaned = -0.0101085 Jy ! Component: 3900 - total flux cleaned = -0.0100586 Jy ! Component: 3950 - total flux cleaned = -0.0100586 Jy ! Component: 4000 - total flux cleaned = -0.0100585 Jy ! Component: 4050 - total flux cleaned = -0.00998495 Jy ! Total flux subtracted in 4096 components = -0.00999698 Jy ! Clean residual min=-0.000771 max=0.000630 Jy/beam ! Clean residual mean=-0.000003 rms=0.000229 Jy/beam ! Combined flux in latest and established models = 0.290904 Jy keep ! Adding 299 model components to the UV plane model. ! The established model now contains 561 components and 0.290904 Jy ![Exited script file: muppet] wmap "J1639+8631_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.114 x 11.43 at 54.18 degrees (North through East) ! Clean map min=-0.002185 max=0.094693 Jy/beam ! Writing clean map to FITS file: J1639+8631_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0946934 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000223563 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.708275 0.708275 1.41655 2.8331 5.6662 11.3324 22.6648 45.3296 90.6592 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.094 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.114 x 11.43 at 54.18 degrees (North through East) ! Clean map min=-0.002185 max=0.094693 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1639+8631_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:31:43 2017