! Started logfile: J1638-1415_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:31:33 2017 obs J1638-1415_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J1638-1415_S_2014_01_04_pus_uva.fits ! AN table 1: 108 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.583333 visibilities/baseline/integration-bin. ! Found source: J1638-1415 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 9072 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1638-1415_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 216 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 216 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 216 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 216 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.948461Jy sigma=0.013437 ! Fit after self-cal, rms=0.907870Jy sigma=0.012982 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.578 mas, bmaj=5.68 mas, bpa=0.9811 degrees ! Estimated noise=813.381 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0706188 Jy ! Component: 100 - total flux cleaned = 0.090302 Jy ! Total flux subtracted in 100 components = 0.090302 Jy ! Clean residual min=-0.007974 max=0.010913 Jy/beam ! Clean residual mean=0.000003 rms=0.002026 Jy/beam ! Combined flux in latest and established models = 0.090302 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.090302 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087780Jy sigma=0.000968 ! Fit after self-cal, rms=0.087663Jy sigma=0.000968 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.039 mas, bmaj=6.529 mas, bpa=1.691 degrees ! Estimated noise=583.18 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0106871 Jy ! Component: 100 - total flux cleaned = 0.0165673 Jy ! Component: 150 - total flux cleaned = 0.0199839 Jy ! Component: 200 - total flux cleaned = 0.0220361 Jy ! Total flux subtracted in 200 components = 0.0220361 Jy ! Clean residual min=-0.007559 max=0.010099 Jy/beam ! Clean residual mean=0.000012 rms=0.002496 Jy/beam ! Combined flux in latest and established models = 0.112338 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 31 components and 0.112338 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085634Jy sigma=0.000966 ! Fit after self-cal, rms=0.085844Jy sigma=0.000966 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.19 FD 1.00* KP 1.00* LA 0.94 ! MK 1.05 NL 0.98 OV 0.96 PT 0.98 ! SC 0.92 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.53 FD 1.00* KP 1.00* LA 0.94 ! MK 1.00 NL 1.02 OV 0.98 PT 0.93 ! SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.32 FD 1.00* KP 1.00* LA 0.78 ! MK 1.00 NL 1.02 OV 0.90 PT 0.92 ! SC 0.94 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00* KP 1.00* LA 0.86 ! MK 0.93 NL 1.06 OV 0.94 PT 0.92 ! SC 0.96 ! ! ! Fit before self-cal, rms=0.085844Jy sigma=0.000966 ! Fit after self-cal, rms=0.081965Jy sigma=0.000926 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.001 mas, bmaj=6.621 mas, bpa=1.598 degrees ! Estimated noise=597.697 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00294151 Jy ! Component: 100 - total flux cleaned = 0.00363545 Jy ! Component: 150 - total flux cleaned = 0.00363446 Jy ! Component: 200 - total flux cleaned = 0.00367888 Jy ! Total flux subtracted in 200 components = 0.00367888 Jy ! Clean residual min=-0.006846 max=0.007085 Jy/beam ! Clean residual mean=-0.000000 rms=0.001741 Jy/beam ! Combined flux in latest and established models = 0.116017 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 40 components and 0.116017 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081783Jy sigma=0.000926 ! Fit after self-cal, rms=0.080938Jy sigma=0.000923 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080938Jy sigma=0.000923 ! Fit after self-cal, rms=0.078111Jy sigma=0.000902 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.983 mas, bmaj=6.609 mas, bpa=1.623 degrees ! Estimated noise=597.34 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00153152 Jy ! Component: 100 - total flux cleaned = 0.001613 Jy ! Component: 150 - total flux cleaned = 0.0016472 Jy ! Component: 200 - total flux cleaned = 0.00168027 Jy ! Total flux subtracted in 200 components = 0.00168027 Jy ! Clean residual min=-0.003454 max=0.004092 Jy/beam ! Clean residual mean=0.000003 rms=0.000947 Jy/beam ! Combined flux in latest and established models = 0.117697 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 45 components and 0.117697 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078065Jy sigma=0.000902 ! Fit after self-cal, rms=0.078005Jy sigma=0.000901 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.90966e-05 Jy ! Component: 100 - total flux cleaned = 8.80398e-05 Jy ! Component: 150 - total flux cleaned = 0.000113819 Jy ! Component: 200 - total flux cleaned = 0.000137778 Jy ! Total flux subtracted in 200 components = 0.000137778 Jy ! Clean residual min=-0.003487 max=0.003966 Jy/beam ! Clean residual mean=0.000003 rms=0.000952 Jy/beam ! Combined flux in latest and established models = 0.117835 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 49 components and 0.117835 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077990Jy sigma=0.000901 ! Fit after self-cal, rms=0.077993Jy sigma=0.000901 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077993Jy sigma=0.000901 ! Fit after self-cal, rms=0.077517Jy sigma=0.000900 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.97 mas, bmaj=6.59 mas, bpa=1.741 degrees ! Estimated noise=595.038 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000500071 Jy ! Component: 100 - total flux cleaned = 0.00057238 Jy ! Component: 150 - total flux cleaned = 0.000572024 Jy ! Component: 200 - total flux cleaned = 0.000592191 Jy ! Total flux subtracted in 200 components = 0.000592191 Jy ! Clean residual min=-0.003352 max=0.003905 Jy/beam ! Clean residual mean=0.000004 rms=0.000903 Jy/beam ! Combined flux in latest and established models = 0.118427 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 54 components and 0.118427 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077503Jy sigma=0.000900 ! Fit after self-cal, rms=0.077525Jy sigma=0.000900 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (13.5, 33.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00348854 Jy ! Component: 100 - total flux cleaned = 0.00511344 Jy ! Component: 150 - total flux cleaned = 0.00618197 Jy ! Component: 200 - total flux cleaned = 0.00701008 Jy ! Total flux subtracted in 200 components = 0.00701008 Jy ! Clean residual min=-0.002715 max=0.002963 Jy/beam ! Clean residual mean=0.000001 rms=0.000730 Jy/beam ! Combined flux in latest and established models = 0.125437 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 93 components and 0.125437 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077385Jy sigma=0.000897 ! Fit after self-cal, rms=0.077389Jy sigma=0.000897 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077389Jy sigma=0.000897 ! Fit after self-cal, rms=0.077358Jy sigma=0.000897 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.413 mas, bmaj=14.73 mas, bpa=11.63 degrees ! Estimated noise=745.202 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00194657 Jy ! Component: 100 - total flux cleaned = 0.00297658 Jy ! Component: 150 - total flux cleaned = 0.00335396 Jy ! Component: 200 - total flux cleaned = 0.00364064 Jy ! Total flux subtracted in 200 components = 0.00364064 Jy ! Clean residual min=-0.003833 max=0.003932 Jy/beam ! Clean residual mean=-0.000003 rms=0.001179 Jy/beam ! Combined flux in latest and established models = 0.129078 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 112 components and 0.129078 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077366Jy sigma=0.000897 ! Fit after self-cal, rms=0.077387Jy sigma=0.000897 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000480159 Jy ! Component: 100 - total flux cleaned = 0.000693592 Jy ! Component: 150 - total flux cleaned = 0.000871903 Jy ! Component: 200 - total flux cleaned = 0.0010066 Jy ! Total flux subtracted in 200 components = 0.0010066 Jy ! Clean residual min=-0.003821 max=0.003911 Jy/beam ! Clean residual mean=-0.000003 rms=0.001156 Jy/beam ! Combined flux in latest and established models = 0.130084 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 116 components and 0.130084 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077396Jy sigma=0.000897 ! Fit after self-cal, rms=0.077383Jy sigma=0.000897 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.971 mas, bmaj=6.591 mas, bpa=1.779 degrees ! Estimated noise=593.365 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.971 x 6.591 at 1.779 degrees (North through East) ! Clean map min=-0.0024504 max=0.089887 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.541 mas, bmaj=5.79 mas, bpa=1.17 degrees ! Estimated noise=813.256 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0707664 Jy ! Component: 100 - total flux cleaned = 0.0914286 Jy ! Component: 150 - total flux cleaned = 0.100841 Jy ! Component: 200 - total flux cleaned = 0.106602 Jy ! Total flux subtracted in 200 components = 0.106602 Jy ! Clean residual min=-0.003403 max=0.004398 Jy/beam ! Clean residual mean=0.000003 rms=0.000885 Jy/beam ! Combined flux in latest and established models = 0.106602 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.106602 Jy ! Inverting map and beam ! Estimated beam: bmin=2.971 mas, bmaj=6.591 mas, bpa=1.779 degrees ! Estimated noise=593.365 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3, -2.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00557059 Jy ! Component: 100 - total flux cleaned = 0.00945778 Jy ! Component: 150 - total flux cleaned = 0.0123872 Jy ! Component: 200 - total flux cleaned = 0.0146776 Jy ! Total flux subtracted in 200 components = 0.0146776 Jy ! Clean residual min=-0.002850 max=0.002836 Jy/beam ! Clean residual mean=0.000003 rms=0.000765 Jy/beam ! Combined flux in latest and established models = 0.121279 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 57 components and 0.121279 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.413 mas, bmaj=14.73 mas, bpa=11.63 degrees ! Estimated noise=745.202 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00314711 Jy ! Component: 100 - total flux cleaned = 0.00520544 Jy ! Component: 150 - total flux cleaned = 0.00676569 Jy ! Component: 200 - total flux cleaned = 0.00796937 Jy ! Total flux subtracted in 200 components = 0.00796937 Jy ! Clean residual min=-0.003707 max=0.003719 Jy/beam ! Clean residual mean=-0.000004 rms=0.001185 Jy/beam ! Combined flux in latest and established models = 0.129249 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000930961 Jy ! Component: 100 - total flux cleaned = 0.00154752 Jy ! Component: 150 - total flux cleaned = 0.00188193 Jy ! Component: 200 - total flux cleaned = 0.00216478 Jy ! Total flux subtracted in 200 components = 0.00216478 Jy ! Clean residual min=-0.003503 max=0.003781 Jy/beam ! Clean residual mean=-0.000007 rms=0.001137 Jy/beam ! Combined flux in latest and established models = 0.131413 Jy ! Adding 58 model components to the UV plane model. ! The established model now contains 113 components and 0.131413 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.971 mas, bmaj=6.591 mas, bpa=1.779 degrees ! Estimated noise=593.365 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000158971 Jy ! Component: 100 - total flux cleaned = -0.000127077 Jy ! Component: 150 - total flux cleaned = -6.42114e-05 Jy ! Component: 200 - total flux cleaned = -3.66071e-05 Jy ! Total flux subtracted in 200 components = -3.66071e-05 Jy ! Clean residual min=-0.002460 max=0.002767 Jy/beam ! Clean residual mean=-0.000002 rms=0.000650 Jy/beam ! Combined flux in latest and established models = 0.131377 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 133 components and 0.131377 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077330Jy sigma=0.000896 ! Fit after self-cal, rms=0.077321Jy sigma=0.000896 wmodel J1638-1415_S_2014_01_04_pus_map.mod ! Writing 133 model components to file: J1638-1415_S_2014_01_04_pus_map.mod wobs J1638-1415_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J1638-1415_S_2014_01_04_pus_uvs.fits wwins J1638-1415_S_2014_01_04_pus_map.win ! wwins: Wrote 3 windows to J1638-1415_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000761649 Jy ! Component: 100 - total flux cleaned = 0.000974638 Jy ! Component: 150 - total flux cleaned = 0.00128238 Jy ! Component: 200 - total flux cleaned = 0.00167654 Jy ! Component: 250 - total flux cleaned = 0.00204798 Jy ! Component: 300 - total flux cleaned = 0.00230643 Jy ! Component: 350 - total flux cleaned = 0.00236779 Jy ! Component: 400 - total flux cleaned = 0.00236761 Jy ! Component: 450 - total flux cleaned = 0.00242385 Jy ! Component: 500 - total flux cleaned = 0.00239687 Jy ! Component: 550 - total flux cleaned = 0.00237051 Jy ! Component: 600 - total flux cleaned = 0.00242165 Jy ! Component: 650 - total flux cleaned = 0.00237158 Jy ! Component: 700 - total flux cleaned = 0.0023474 Jy ! Component: 750 - total flux cleaned = 0.00234757 Jy ! Component: 800 - total flux cleaned = 0.0023247 Jy ! Component: 850 - total flux cleaned = 0.00232427 Jy ! Component: 900 - total flux cleaned = 0.00241092 Jy ! Component: 950 - total flux cleaned = 0.00241065 Jy ! Component: 1000 - total flux cleaned = 0.00245227 Jy ! Component: 1050 - total flux cleaned = 0.0024326 Jy ! Component: 1100 - total flux cleaned = 0.002472 Jy ! Component: 1150 - total flux cleaned = 0.00245304 Jy ! Component: 1200 - total flux cleaned = 0.00250982 Jy ! Component: 1250 - total flux cleaned = 0.00254633 Jy ! Component: 1300 - total flux cleaned = 0.0026004 Jy ! Component: 1350 - total flux cleaned = 0.00265338 Jy ! Component: 1400 - total flux cleaned = 0.00270542 Jy ! Component: 1450 - total flux cleaned = 0.00273956 Jy ! Component: 1500 - total flux cleaned = 0.00285598 Jy ! Component: 1550 - total flux cleaned = 0.00288865 Jy ! Component: 1600 - total flux cleaned = 0.00295308 Jy ! Component: 1650 - total flux cleaned = 0.00301614 Jy ! Component: 1700 - total flux cleaned = 0.00304715 Jy ! Component: 1750 - total flux cleaned = 0.0030778 Jy ! Component: 1800 - total flux cleaned = 0.00310771 Jy ! Component: 1850 - total flux cleaned = 0.0031226 Jy ! Component: 1900 - total flux cleaned = 0.0031517 Jy ! Component: 1950 - total flux cleaned = 0.00315186 Jy ! Component: 2000 - total flux cleaned = 0.00316611 Jy ! Component: 2050 - total flux cleaned = 0.00316613 Jy ! Component: 2100 - total flux cleaned = 0.00315229 Jy ! Component: 2150 - total flux cleaned = 0.00313886 Jy ! Component: 2200 - total flux cleaned = 0.00312548 Jy ! Component: 2250 - total flux cleaned = 0.00308546 Jy ! Component: 2300 - total flux cleaned = 0.0030592 Jy ! Component: 2350 - total flux cleaned = 0.0030203 Jy ! Component: 2400 - total flux cleaned = 0.00300748 Jy ! Component: 2450 - total flux cleaned = 0.00300741 Jy ! Component: 2500 - total flux cleaned = 0.00299476 Jy ! Component: 2550 - total flux cleaned = 0.00299483 Jy ! Component: 2600 - total flux cleaned = 0.00299463 Jy ! Component: 2650 - total flux cleaned = 0.0029824 Jy ! Component: 2700 - total flux cleaned = 0.00298248 Jy ! Component: 2750 - total flux cleaned = 0.00300639 Jy ! Component: 2800 - total flux cleaned = 0.00300628 Jy ! Component: 2850 - total flux cleaned = 0.00301801 Jy ! Component: 2900 - total flux cleaned = 0.00304116 Jy ! Component: 2950 - total flux cleaned = 0.00301809 Jy ! Component: 3000 - total flux cleaned = 0.00301807 Jy ! Component: 3050 - total flux cleaned = 0.0030067 Jy ! Component: 3100 - total flux cleaned = 0.00297321 Jy ! Component: 3150 - total flux cleaned = 0.00292889 Jy ! Component: 3200 - total flux cleaned = 0.00292911 Jy ! Component: 3250 - total flux cleaned = 0.00297298 Jy ! Component: 3300 - total flux cleaned = 0.00299467 Jy ! Component: 3350 - total flux cleaned = 0.00296234 Jy ! Component: 3400 - total flux cleaned = 0.00298379 Jy ! Component: 3450 - total flux cleaned = 0.00298374 Jy ! Component: 3500 - total flux cleaned = 0.00296269 Jy ! Component: 3550 - total flux cleaned = 0.00295229 Jy ! Component: 3600 - total flux cleaned = 0.00296271 Jy ! Component: 3650 - total flux cleaned = 0.00295241 Jy ! Component: 3700 - total flux cleaned = 0.00297307 Jy ! Component: 3750 - total flux cleaned = 0.00296283 Jy ! Component: 3800 - total flux cleaned = 0.00299315 Jy ! Component: 3850 - total flux cleaned = 0.00297298 Jy ! Component: 3900 - total flux cleaned = 0.00296289 Jy ! Component: 3950 - total flux cleaned = 0.00296284 Jy ! Component: 4000 - total flux cleaned = 0.00297269 Jy ! Component: 4050 - total flux cleaned = 0.0029923 Jy ! Total flux subtracted in 4096 components = 0.00300193 Jy ! Clean residual min=-0.000636 max=0.000698 Jy/beam ! Clean residual mean=-0.000000 rms=0.000166 Jy/beam ! Combined flux in latest and established models = 0.134379 Jy keep ! Adding 271 model components to the UV plane model. ! The established model now contains 404 components and 0.134379 Jy ![Exited script file: muppet] wmap "J1638-1415_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.971 x 6.591 at 1.779 degrees (North through East) ! Clean map min=-0.0016166 max=0.091247 Jy/beam ! Writing clean map to FITS file: J1638-1415_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.091247 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000163157 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.536424 0.536424 1.07285 2.14569 4.29139 8.58278 17.1656 34.3311 68.6622 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.091 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.971 x 6.591 at 1.779 degrees (North through East) ! Clean map min=-0.0016166 max=0.091247 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1638-1415_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:31:37 2017