! Started logfile: J1631+4927_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:31:24 2017 obs J1631+4927_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J1631+4927_S_2014_01_04_pus_uva.fits ! AN table 1: 76 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.430556 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1631+4927 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 4712 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1631+4927_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 228 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 228 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 228 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 228 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.840913Jy sigma=0.013331 ! Fit after self-cal, rms=0.826646Jy sigma=0.013104 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.815 mas, bmaj=9.544 mas, bpa=28.23 degrees ! Estimated noise=1128.24 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.131498 Jy ! Component: 100 - total flux cleaned = 0.160305 Jy ! Total flux subtracted in 100 components = 0.160305 Jy ! Clean residual min=-0.007659 max=0.009199 Jy/beam ! Clean residual mean=0.000026 rms=0.001976 Jy/beam ! Combined flux in latest and established models = 0.160305 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.160305 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071423Jy sigma=0.000993 ! Fit after self-cal, rms=0.071416Jy sigma=0.000993 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.677 mas, bmaj=9.865 mas, bpa=28.62 degrees ! Estimated noise=687.031 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0124343 Jy ! Component: 100 - total flux cleaned = 0.018102 Jy ! Component: 150 - total flux cleaned = 0.0215867 Jy ! Component: 200 - total flux cleaned = 0.0241434 Jy ! Total flux subtracted in 200 components = 0.0241434 Jy ! Clean residual min=-0.004801 max=0.007229 Jy/beam ! Clean residual mean=0.000037 rms=0.001565 Jy/beam ! Combined flux in latest and established models = 0.184448 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 29 components and 0.184448 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068616Jy sigma=0.000971 ! Fit after self-cal, rms=0.068614Jy sigma=0.000971 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00* KP 1.00* LA 1.03 ! MK 1.02 NL 0.97 OV 0.97 PT 1.01 ! SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00* KP 1.00* LA 1.01 ! MK 0.99 NL 1.06 OV 0.99 PT 0.97 ! SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00* KP 1.00* LA 0.83 ! MK 1.00 NL 0.98 OV 0.94 PT 0.94 ! SC 0.95 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.20 FD 1.00* KP 1.00* LA 0.87 ! MK 0.98 NL 1.07 OV 1.00 PT 0.97 ! SC 0.99 ! ! ! Fit before self-cal, rms=0.068614Jy sigma=0.000971 ! Fit after self-cal, rms=0.064205Jy sigma=0.000927 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.662 mas, bmaj=10.02 mas, bpa=28.54 degrees ! Estimated noise=684.712 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-10.5, -2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00159521 Jy ! Component: 100 - total flux cleaned = 0.00133757 Jy ! Component: 150 - total flux cleaned = 0.00156912 Jy ! Component: 200 - total flux cleaned = 0.00181311 Jy ! Total flux subtracted in 200 components = 0.00181311 Jy ! Clean residual min=-0.002070 max=0.002280 Jy/beam ! Clean residual mean=0.000006 rms=0.000555 Jy/beam ! Combined flux in latest and established models = 0.186261 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 50 components and 0.186261 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063842Jy sigma=0.000921 ! Fit after self-cal, rms=0.063600Jy sigma=0.000920 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063600Jy sigma=0.000920 ! Fit after self-cal, rms=0.063228Jy sigma=0.000915 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.658 mas, bmaj=10.02 mas, bpa=28.61 degrees ! Estimated noise=683.797 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000581675 Jy ! Component: 100 - total flux cleaned = 0.0006155 Jy ! Component: 150 - total flux cleaned = 0.000555112 Jy ! Component: 200 - total flux cleaned = 0.000555744 Jy ! Total flux subtracted in 200 components = 0.000555744 Jy ! Clean residual min=-0.001752 max=0.001805 Jy/beam ! Clean residual mean=0.000006 rms=0.000421 Jy/beam ! Combined flux in latest and established models = 0.186817 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 67 components and 0.186817 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063188Jy sigma=0.000914 ! Fit after self-cal, rms=0.063175Jy sigma=0.000914 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (110, -105.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000901444 Jy ! Component: 100 - total flux cleaned = 0.000954988 Jy ! Component: 150 - total flux cleaned = 0.000885184 Jy ! Component: 200 - total flux cleaned = 0.000760654 Jy ! Total flux subtracted in 200 components = 0.000760654 Jy ! Clean residual min=-0.001667 max=0.001573 Jy/beam ! Clean residual mean=0.000005 rms=0.000362 Jy/beam ! Combined flux in latest and established models = 0.187578 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 91 components and 0.187578 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063104Jy sigma=0.000913 ! Fit after self-cal, rms=0.063091Jy sigma=0.000913 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063091Jy sigma=0.000913 ! Fit after self-cal, rms=0.063040Jy sigma=0.000913 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.657 mas, bmaj=10.02 mas, bpa=28.63 degrees ! Estimated noise=683.535 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000286646 Jy ! Component: 100 - total flux cleaned = 0.000316752 Jy ! Component: 150 - total flux cleaned = 0.000289393 Jy ! Component: 200 - total flux cleaned = 0.000312635 Jy ! Total flux subtracted in 200 components = 0.000312635 Jy ! Clean residual min=-0.001520 max=0.001510 Jy/beam ! Clean residual mean=0.000004 rms=0.000330 Jy/beam ! Combined flux in latest and established models = 0.18789 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 111 components and 0.18789 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063015Jy sigma=0.000913 ! Fit after self-cal, rms=0.063012Jy sigma=0.000913 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.32144e-05 Jy ! Component: 100 - total flux cleaned = 9.70959e-05 Jy ! Component: 150 - total flux cleaned = 0.000137951 Jy ! Component: 200 - total flux cleaned = 0.000137466 Jy ! Total flux subtracted in 200 components = 0.000137466 Jy ! Clean residual min=-0.001467 max=0.001506 Jy/beam ! Clean residual mean=0.000004 rms=0.000317 Jy/beam ! Combined flux in latest and established models = 0.188028 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 122 components and 0.188028 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062998Jy sigma=0.000913 ! Fit after self-cal, rms=0.062995Jy sigma=0.000913 ! Inverting map ! Added new window around map position (-71, 113.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000538847 Jy ! Component: 100 - total flux cleaned = 0.000713279 Jy ! Component: 150 - total flux cleaned = 0.000798751 Jy ! Component: 200 - total flux cleaned = 0.000823015 Jy ! Total flux subtracted in 200 components = 0.000823015 Jy ! Clean residual min=-0.001393 max=0.001047 Jy/beam ! Clean residual mean=0.000003 rms=0.000284 Jy/beam ! Combined flux in latest and established models = 0.188851 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 142 components and 0.188851 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062950Jy sigma=0.000912 ! Fit after self-cal, rms=0.062946Jy sigma=0.000912 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062946Jy sigma=0.000912 ! Fit after self-cal, rms=0.062985Jy sigma=0.000912 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.031 mas, bmaj=10.48 mas, bpa=33.29 degrees ! Estimated noise=765.857 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00054502 Jy ! Component: 100 - total flux cleaned = 0.000708681 Jy ! Component: 150 - total flux cleaned = 0.000815774 Jy ! Component: 200 - total flux cleaned = 0.000928544 Jy ! Total flux subtracted in 200 components = 0.000928544 Jy ! Clean residual min=-0.000947 max=0.000933 Jy/beam ! Clean residual mean=0.000004 rms=0.000245 Jy/beam ! Combined flux in latest and established models = 0.189779 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 165 components and 0.189779 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062975Jy sigma=0.000912 ! Fit after self-cal, rms=0.062977Jy sigma=0.000912 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000173968 Jy ! Component: 100 - total flux cleaned = 0.000280278 Jy ! Component: 150 - total flux cleaned = 0.000335244 Jy ! Component: 200 - total flux cleaned = 0.000372374 Jy ! Total flux subtracted in 200 components = 0.000372374 Jy ! Clean residual min=-0.000878 max=0.000916 Jy/beam ! Clean residual mean=0.000002 rms=0.000233 Jy/beam ! Combined flux in latest and established models = 0.190152 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 182 components and 0.190152 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062971Jy sigma=0.000912 ! Fit after self-cal, rms=0.062970Jy sigma=0.000912 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.656 mas, bmaj=10.02 mas, bpa=28.64 degrees ! Estimated noise=683.785 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.656 x 10.02 at 28.64 degrees (North through East) ! Clean map min=-0.0018399 max=0.17099 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.771 mas, bmaj=9.728 mas, bpa=28.31 degrees ! Estimated noise=1140.57 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.132905 Jy ! Component: 100 - total flux cleaned = 0.16223 Jy ! Component: 150 - total flux cleaned = 0.17196 Jy ! Component: 200 - total flux cleaned = 0.173729 Jy ! Total flux subtracted in 200 components = 0.173729 Jy ! Clean residual min=-0.003573 max=0.003760 Jy/beam ! Clean residual mean=0.000009 rms=0.000899 Jy/beam ! Combined flux in latest and established models = 0.173729 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.173729 Jy ! Inverting map and beam ! Estimated beam: bmin=3.656 mas, bmaj=10.02 mas, bpa=28.64 degrees ! Estimated noise=683.785 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00410973 Jy ! Component: 100 - total flux cleaned = 0.00672192 Jy ! Component: 150 - total flux cleaned = 0.00857936 Jy ! Component: 200 - total flux cleaned = 0.00972604 Jy ! Total flux subtracted in 200 components = 0.00972604 Jy ! Clean residual min=-0.001923 max=0.001802 Jy/beam ! Clean residual mean=0.000012 rms=0.000488 Jy/beam ! Combined flux in latest and established models = 0.183455 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 46 components and 0.183455 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.031 mas, bmaj=10.48 mas, bpa=33.29 degrees ! Estimated noise=765.857 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0017224 Jy ! Component: 100 - total flux cleaned = 0.00278362 Jy ! Component: 150 - total flux cleaned = 0.00348492 Jy ! Component: 200 - total flux cleaned = 0.00389848 Jy ! Total flux subtracted in 200 components = 0.00389848 Jy ! Clean residual min=-0.001347 max=0.001258 Jy/beam ! Clean residual mean=0.000013 rms=0.000364 Jy/beam ! Combined flux in latest and established models = 0.187353 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00023231 Jy ! Component: 100 - total flux cleaned = 0.000472013 Jy ! Component: 150 - total flux cleaned = 0.000718695 Jy ! Component: 200 - total flux cleaned = 0.000844335 Jy ! Total flux subtracted in 200 components = 0.000844335 Jy ! Clean residual min=-0.001161 max=0.001093 Jy/beam ! Clean residual mean=0.000011 rms=0.000310 Jy/beam ! Combined flux in latest and established models = 0.188198 Jy ! Adding 77 model components to the UV plane model. ! The established model now contains 122 components and 0.188198 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.656 mas, bmaj=10.02 mas, bpa=28.64 degrees ! Estimated noise=683.785 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000146398 Jy ! Component: 100 - total flux cleaned = -0.000189403 Jy ! Component: 150 - total flux cleaned = -0.000188492 Jy ! Component: 200 - total flux cleaned = -0.000226019 Jy ! Total flux subtracted in 200 components = -0.000226019 Jy ! Clean residual min=-0.001629 max=0.001187 Jy/beam ! Clean residual mean=0.000005 rms=0.000331 Jy/beam ! Combined flux in latest and established models = 0.187972 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 146 components and 0.187972 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063071Jy sigma=0.000913 ! Fit after self-cal, rms=0.063067Jy sigma=0.000913 wmodel J1631+4927_S_2014_01_04_pus_map.mod ! Writing 146 model components to file: J1631+4927_S_2014_01_04_pus_map.mod wobs J1631+4927_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J1631+4927_S_2014_01_04_pus_uvs.fits wwins J1631+4927_S_2014_01_04_pus_map.win ! wwins: Wrote 4 windows to J1631+4927_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000640949 Jy ! Component: 100 - total flux cleaned = -0.000858104 Jy ! Component: 150 - total flux cleaned = -0.000939249 Jy ! Component: 200 - total flux cleaned = -0.000998288 Jy ! Component: 250 - total flux cleaned = -0.000998013 Jy ! Component: 300 - total flux cleaned = -0.000980255 Jy ! Component: 350 - total flux cleaned = -0.00098022 Jy ! Component: 400 - total flux cleaned = -0.000929902 Jy ! Component: 450 - total flux cleaned = -0.000880784 Jy ! Component: 500 - total flux cleaned = -0.000816936 Jy ! Component: 550 - total flux cleaned = -0.000739263 Jy ! Component: 600 - total flux cleaned = -0.000648359 Jy ! Component: 650 - total flux cleaned = -0.000530329 Jy ! Component: 700 - total flux cleaned = -0.000428748 Jy ! Component: 750 - total flux cleaned = -0.00024408 Jy ! Component: 800 - total flux cleaned = -0.0001046 Jy ! Component: 850 - total flux cleaned = 3.28901e-05 Jy ! Component: 900 - total flux cleaned = 0.000181375 Jy ! Component: 950 - total flux cleaned = 0.000354032 Jy ! Component: 1000 - total flux cleaned = 0.000497643 Jy ! Component: 1050 - total flux cleaned = 0.000639201 Jy ! Component: 1100 - total flux cleaned = 0.000753312 Jy ! Component: 1150 - total flux cleaned = 0.000865832 Jy ! Component: 1200 - total flux cleaned = 0.0009523 Jy ! Component: 1250 - total flux cleaned = 0.00107433 Jy ! Component: 1300 - total flux cleaned = 0.00117077 Jy ! Component: 1350 - total flux cleaned = 0.0012779 Jy ! Component: 1400 - total flux cleaned = 0.00134858 Jy ! Component: 1450 - total flux cleaned = 0.00145353 Jy ! Component: 1500 - total flux cleaned = 0.00152281 Jy ! Component: 1550 - total flux cleaned = 0.00160296 Jy ! Component: 1600 - total flux cleaned = 0.00171615 Jy ! Component: 1650 - total flux cleaned = 0.00180571 Jy ! Component: 1700 - total flux cleaned = 0.00189452 Jy ! Component: 1750 - total flux cleaned = 0.00198247 Jy ! Component: 1800 - total flux cleaned = 0.00206967 Jy ! Component: 1850 - total flux cleaned = 0.00215615 Jy ! Component: 1900 - total flux cleaned = 0.0022633 Jy ! Component: 1950 - total flux cleaned = 0.00231643 Jy ! Component: 2000 - total flux cleaned = 0.00239025 Jy ! Component: 2050 - total flux cleaned = 0.00246346 Jy ! Component: 2100 - total flux cleaned = 0.00253606 Jy ! Component: 2150 - total flux cleaned = 0.00259787 Jy ! Component: 2200 - total flux cleaned = 0.00267966 Jy ! Component: 2250 - total flux cleaned = 0.00276079 Jy ! Component: 2300 - total flux cleaned = 0.00283132 Jy ! Component: 2350 - total flux cleaned = 0.00289121 Jy ! Component: 2400 - total flux cleaned = 0.00296067 Jy ! Component: 2450 - total flux cleaned = 0.00301988 Jy ! Component: 2500 - total flux cleaned = 0.00309821 Jy ! Component: 2550 - total flux cleaned = 0.00317598 Jy ! Component: 2600 - total flux cleaned = 0.00321468 Jy ! Component: 2650 - total flux cleaned = 0.00324346 Jy ! Component: 2700 - total flux cleaned = 0.00329128 Jy ! Component: 2750 - total flux cleaned = 0.00330082 Jy ! Component: 2800 - total flux cleaned = 0.00335753 Jy ! Component: 2850 - total flux cleaned = 0.00341389 Jy ! Component: 2900 - total flux cleaned = 0.00345125 Jy ! Component: 2950 - total flux cleaned = 0.00349768 Jy ! Component: 3000 - total flux cleaned = 0.00355317 Jy ! Component: 3050 - total flux cleaned = 0.00359922 Jy ! Component: 3100 - total flux cleaned = 0.00367266 Jy ! Component: 3150 - total flux cleaned = 0.00372747 Jy ! Component: 3200 - total flux cleaned = 0.00378209 Jy ! Component: 3250 - total flux cleaned = 0.00384557 Jy ! Component: 3300 - total flux cleaned = 0.00392692 Jy ! Component: 3350 - total flux cleaned = 0.00398996 Jy ! Component: 3400 - total flux cleaned = 0.00400793 Jy ! Component: 3450 - total flux cleaned = 0.0040796 Jy ! Component: 3500 - total flux cleaned = 0.00412427 Jy ! Component: 3550 - total flux cleaned = 0.00419557 Jy ! Component: 3600 - total flux cleaned = 0.00423999 Jy ! Component: 3650 - total flux cleaned = 0.00431089 Jy ! Component: 3700 - total flux cleaned = 0.00434623 Jy ! Component: 3750 - total flux cleaned = 0.00441684 Jy ! Component: 3800 - total flux cleaned = 0.00446967 Jy ! Component: 3850 - total flux cleaned = 0.00453999 Jy ! Component: 3900 - total flux cleaned = 0.00457506 Jy ! Component: 3950 - total flux cleaned = 0.00462759 Jy ! Component: 4000 - total flux cleaned = 0.00471503 Jy ! Component: 4050 - total flux cleaned = 0.00473247 Jy ! Total flux subtracted in 4096 components = 0.00479358 Jy ! Clean residual min=-0.000599 max=0.000562 Jy/beam ! Clean residual mean=0.000002 rms=0.000146 Jy/beam ! Combined flux in latest and established models = 0.192765 Jy keep ! Adding 212 model components to the UV plane model. ! The established model now contains 358 components and 0.192765 Jy ![Exited script file: muppet] wmap "J1631+4927_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.656 x 10.02 at 28.64 degrees (North through East) ! Clean map min=-0.001712 max=0.17103 Jy/beam ! Writing clean map to FITS file: J1631+4927_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.17103 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000151995 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.266612 0.266612 0.533224 1.06645 2.1329 4.26579 8.53159 17.0632 34.1264 68.2527 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.171 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.656 x 10.02 at 28.64 degrees (North through East) ! Clean map min=-0.001712 max=0.17103 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1631+4927_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:31:28 2017