! Started logfile: J1630+0015_S_2014_05_31_pus_uvs.log on Mon Nov 28 15:32:07 2016 obs J1630+0015_S_2014_05_31_pus_uva.fits ! Reading UV FITS file: J1630+0015_S_2014_05_31_pus_uva.fits ! AN table 1: 122 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.98051 visibilities/baseline/integration-bin. ! Found source: J1630+0015 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 336 lines of history. ! ! Reading 21532 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1630+0015_S_2014_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.985514Jy sigma=0.011141 ! Fit after self-cal, rms=0.952957Jy sigma=0.010810 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.954 mas, bmaj=6.845 mas, bpa=-3.959 degrees ! Estimated noise=638.949 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0381231 Jy ! Component: 100 - total flux cleaned = 0.0464723 Jy ! Total flux subtracted in 100 components = 0.0464723 Jy ! Clean residual min=-0.002082 max=0.002484 Jy/beam ! Clean residual mean=0.000007 rms=0.000535 Jy/beam ! Combined flux in latest and established models = 0.0464723 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.0464723 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072622Jy sigma=0.000768 ! Fit after self-cal, rms=0.072289Jy sigma=0.000765 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.514 mas, bmaj=7.786 mas, bpa=-3.901 degrees ! Estimated noise=431.743 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00271822 Jy ! Component: 100 - total flux cleaned = 0.00352869 Jy ! Component: 150 - total flux cleaned = 0.00358916 Jy ! Component: 200 - total flux cleaned = 0.00364302 Jy ! Total flux subtracted in 200 components = 0.00364302 Jy ! Clean residual min=-0.001410 max=0.001254 Jy/beam ! Clean residual mean=0.000006 rms=0.000346 Jy/beam ! Combined flux in latest and established models = 0.0501153 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 16 components and 0.0501153 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072173Jy sigma=0.000764 ! Fit after self-cal, rms=0.072168Jy sigma=0.000764 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.83 HN 0.99 KP 1.07 ! LA 1.11 MK 0.99 NL 0.96 OV 1.02 ! PT 1.05 SC 1.01 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.05 HN 0.96 KP 1.04 ! LA 1.18 MK 1.02 NL 0.96 OV 1.06 ! PT 0.99 SC 0.93 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.08 HN 1.01 KP 0.94 ! LA 0.91 MK 1.05 NL 0.99 OV 0.94 ! PT 0.98 SC 0.98 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.99 HN 0.97 KP 0.90 ! LA 0.85 MK 1.01 NL 1.01 OV 1.02 ! PT 1.04 SC 0.93 ! ! ! Fit before self-cal, rms=0.072168Jy sigma=0.000764 ! Fit after self-cal, rms=0.070521Jy sigma=0.000763 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.505 mas, bmaj=7.76 mas, bpa=-3.487 degrees ! Estimated noise=430.664 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000274006 Jy ! Component: 100 - total flux cleaned = 0.000313345 Jy ! Component: 150 - total flux cleaned = 0.000327133 Jy ! Component: 200 - total flux cleaned = 0.00034629 Jy ! Total flux subtracted in 200 components = 0.00034629 Jy ! Clean residual min=-0.001263 max=0.001232 Jy/beam ! Clean residual mean=0.000005 rms=0.000317 Jy/beam ! Combined flux in latest and established models = 0.0504616 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 25 components and 0.0504616 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070519Jy sigma=0.000763 ! Fit after self-cal, rms=0.070492Jy sigma=0.000762 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070492Jy sigma=0.000762 ! Fit after self-cal, rms=0.070385Jy sigma=0.000762 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.5 mas, bmaj=7.75 mas, bpa=-3.481 degrees ! Estimated noise=430.423 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000245864 Jy ! Component: 100 - total flux cleaned = 0.000291171 Jy ! Component: 150 - total flux cleaned = 0.000297384 Jy ! Component: 200 - total flux cleaned = 0.000308838 Jy ! Total flux subtracted in 200 components = 0.000308838 Jy ! Clean residual min=-0.001230 max=0.001165 Jy/beam ! Clean residual mean=0.000003 rms=0.000306 Jy/beam ! Combined flux in latest and established models = 0.0507704 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 30 components and 0.0507704 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070383Jy sigma=0.000762 ! Fit after self-cal, rms=0.070387Jy sigma=0.000762 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.27756e-05 Jy ! Component: 100 - total flux cleaned = -1.69305e-06 Jy ! Component: 150 - total flux cleaned = 8.47634e-06 Jy ! Component: 200 - total flux cleaned = 1.79779e-05 Jy ! Total flux subtracted in 200 components = 1.79779e-05 Jy ! Clean residual min=-0.001227 max=0.001179 Jy/beam ! Clean residual mean=0.000003 rms=0.000308 Jy/beam ! Combined flux in latest and established models = 0.0507884 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 36 components and 0.0507884 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070386Jy sigma=0.000762 ! Fit after self-cal, rms=0.070386Jy sigma=0.000762 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070386Jy sigma=0.000762 ! Fit after self-cal, rms=0.070370Jy sigma=0.000762 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.492 mas, bmaj=7.745 mas, bpa=-3.563 degrees ! Estimated noise=430.265 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000153591 Jy ! Component: 100 - total flux cleaned = 0.000197006 Jy ! Component: 150 - total flux cleaned = 0.000205922 Jy ! Component: 200 - total flux cleaned = 0.000218454 Jy ! Total flux subtracted in 200 components = 0.000218454 Jy ! Clean residual min=-0.001253 max=0.001164 Jy/beam ! Clean residual mean=0.000003 rms=0.000307 Jy/beam ! Combined flux in latest and established models = 0.0510069 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 41 components and 0.0510069 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070369Jy sigma=0.000762 ! Fit after self-cal, rms=0.070370Jy sigma=0.000762 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.80455e-06 Jy ! Component: 100 - total flux cleaned = 9.73592e-06 Jy ! Component: 150 - total flux cleaned = 1.34845e-05 Jy ! Component: 200 - total flux cleaned = 1.74307e-05 Jy ! Total flux subtracted in 200 components = 1.74307e-05 Jy ! Clean residual min=-0.001252 max=0.001165 Jy/beam ! Clean residual mean=0.000003 rms=0.000307 Jy/beam ! Combined flux in latest and established models = 0.0510243 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 44 components and 0.0510243 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070369Jy sigma=0.000762 ! Fit after self-cal, rms=0.070369Jy sigma=0.000762 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070369Jy sigma=0.000762 ! Fit after self-cal, rms=0.070374Jy sigma=0.000762 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.518 mas, bmaj=11.9 mas, bpa=-3.978 degrees ! Estimated noise=526.775 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000242082 Jy ! Component: 100 - total flux cleaned = 0.000264364 Jy ! Component: 150 - total flux cleaned = 0.000278623 Jy ! Component: 200 - total flux cleaned = 0.000291129 Jy ! Total flux subtracted in 200 components = 0.000291129 Jy ! Clean residual min=-0.001313 max=0.001338 Jy/beam ! Clean residual mean=0.000007 rms=0.000393 Jy/beam ! Combined flux in latest and established models = 0.0513154 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 47 components and 0.0513154 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070374Jy sigma=0.000762 ! Fit after self-cal, rms=0.070375Jy sigma=0.000762 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.48216e-05 Jy ! Component: 100 - total flux cleaned = 2.75092e-05 Jy ! Component: 150 - total flux cleaned = 3.86531e-05 Jy ! Component: 200 - total flux cleaned = 4.18286e-05 Jy ! Total flux subtracted in 200 components = 4.18286e-05 Jy ! Clean residual min=-0.001311 max=0.001337 Jy/beam ! Clean residual mean=0.000007 rms=0.000393 Jy/beam ! Combined flux in latest and established models = 0.0513573 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 48 components and 0.0513573 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070376Jy sigma=0.000762 ! Fit after self-cal, rms=0.070376Jy sigma=0.000762 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.486 mas, bmaj=7.742 mas, bpa=-3.629 degrees ! Estimated noise=430.337 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.486 x 7.742 at -3.629 degrees (North through East) ! Clean map min=-0.0012078 max=0.049432 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.93 mas, bmaj=6.811 mas, bpa=-3.618 degrees ! Estimated noise=634.167 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0382046 Jy ! Component: 100 - total flux cleaned = 0.0466211 Jy ! Component: 150 - total flux cleaned = 0.0487523 Jy ! Component: 200 - total flux cleaned = 0.0497959 Jy ! Total flux subtracted in 200 components = 0.0497959 Jy ! Clean residual min=-0.001824 max=0.001812 Jy/beam ! Clean residual mean=0.000003 rms=0.000489 Jy/beam ! Combined flux in latest and established models = 0.0497959 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.0497959 Jy ! Inverting map and beam ! Estimated beam: bmin=3.486 mas, bmaj=7.742 mas, bpa=-3.629 degrees ! Estimated noise=430.337 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000999256 Jy ! Component: 100 - total flux cleaned = 0.00116153 Jy ! Component: 150 - total flux cleaned = 0.00126102 Jy ! Component: 200 - total flux cleaned = 0.00134633 Jy ! Total flux subtracted in 200 components = 0.00134633 Jy ! Clean residual min=-0.001273 max=0.001153 Jy/beam ! Clean residual mean=0.000003 rms=0.000308 Jy/beam ! Combined flux in latest and established models = 0.0511422 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 32 components and 0.0511422 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.518 mas, bmaj=11.9 mas, bpa=-3.978 degrees ! Estimated noise=526.775 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000139671 Jy ! Component: 100 - total flux cleaned = 0.000167434 Jy ! Component: 150 - total flux cleaned = 0.000180817 Jy ! Component: 200 - total flux cleaned = 0.000188664 Jy ! Total flux subtracted in 200 components = 0.000188664 Jy ! Clean residual min=-0.001317 max=0.001326 Jy/beam ! Clean residual mean=0.000007 rms=0.000394 Jy/beam ! Combined flux in latest and established models = 0.0513308 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.1436e-06 Jy ! Component: 100 - total flux cleaned = 1.39626e-05 Jy ! Component: 150 - total flux cleaned = 2.02587e-05 Jy ! Component: 200 - total flux cleaned = 2.61808e-05 Jy ! Total flux subtracted in 200 components = 2.61808e-05 Jy ! Clean residual min=-0.001313 max=0.001327 Jy/beam ! Clean residual mean=0.000007 rms=0.000393 Jy/beam ! Combined flux in latest and established models = 0.051357 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 41 components and 0.051357 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.486 mas, bmaj=7.742 mas, bpa=-3.629 degrees ! Estimated noise=430.337 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.99041e-05 Jy ! Component: 100 - total flux cleaned = -4.84748e-05 Jy ! Component: 150 - total flux cleaned = -6.29626e-05 Jy ! Component: 200 - total flux cleaned = -8.2459e-05 Jy ! Total flux subtracted in 200 components = -8.2459e-05 Jy ! Clean residual min=-0.001268 max=0.001140 Jy/beam ! Clean residual mean=0.000003 rms=0.000307 Jy/beam ! Combined flux in latest and established models = 0.0512746 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 48 components and 0.0512746 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070377Jy sigma=0.000762 ! Fit after self-cal, rms=0.070377Jy sigma=0.000762 wmodel J1630+0015_S_2014_05_31_pus_map.mod ! Writing 48 model components to file: J1630+0015_S_2014_05_31_pus_map.mod wobs J1630+0015_S_2014_05_31_pus_uvs.fits ! Writing UV FITS file: J1630+0015_S_2014_05_31_pus_uvs.fits wwins J1630+0015_S_2014_05_31_pus_map.win ! wwins: Wrote 1 windows to J1630+0015_S_2014_05_31_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00035154 Jy ! Component: 100 - total flux cleaned = -0.000352124 Jy ! Component: 150 - total flux cleaned = -0.000234007 Jy ! Component: 200 - total flux cleaned = -0.000139434 Jy ! Component: 250 - total flux cleaned = -6.60363e-05 Jy ! Component: 300 - total flux cleaned = 2.33268e-05 Jy ! Component: 350 - total flux cleaned = 0.000144361 Jy ! Component: 400 - total flux cleaned = 0.000228727 Jy ! Component: 450 - total flux cleaned = 0.000261837 Jy ! Component: 500 - total flux cleaned = 0.00035892 Jy ! Component: 550 - total flux cleaned = 0.000375083 Jy ! Component: 600 - total flux cleaned = 0.000390924 Jy ! Component: 650 - total flux cleaned = 0.000436734 Jy ! Component: 700 - total flux cleaned = 0.000481424 Jy ! Component: 750 - total flux cleaned = 0.000555031 Jy ! Component: 800 - total flux cleaned = 0.00062727 Jy ! Component: 850 - total flux cleaned = 0.000698367 Jy ! Component: 900 - total flux cleaned = 0.000754304 Jy ! Component: 950 - total flux cleaned = 0.000836743 Jy ! Component: 1000 - total flux cleaned = 0.000904328 Jy ! Component: 1050 - total flux cleaned = 0.000930793 Jy ! Component: 1100 - total flux cleaned = 0.0009703 Jy ! Component: 1150 - total flux cleaned = 0.00100893 Jy ! Component: 1200 - total flux cleaned = 0.00100887 Jy ! Component: 1250 - total flux cleaned = 0.00100892 Jy ! Component: 1300 - total flux cleaned = 0.0009967 Jy ! Component: 1350 - total flux cleaned = 0.00103346 Jy ! Component: 1400 - total flux cleaned = 0.00100952 Jy ! Component: 1450 - total flux cleaned = 0.000997788 Jy ! Component: 1500 - total flux cleaned = 0.0010097 Jy ! Component: 1550 - total flux cleaned = 0.00102144 Jy ! Component: 1600 - total flux cleaned = 0.00103304 Jy ! Component: 1650 - total flux cleaned = 0.0010558 Jy ! Component: 1700 - total flux cleaned = 0.00105567 Jy ! Component: 1750 - total flux cleaned = 0.00102221 Jy ! Component: 1800 - total flux cleaned = 0.00105529 Jy ! Component: 1850 - total flux cleaned = 0.00107689 Jy ! Component: 1900 - total flux cleaned = 0.00104454 Jy ! Component: 1950 - total flux cleaned = 0.00105515 Jy ! Component: 2000 - total flux cleaned = 0.00101272 Jy ! Component: 2050 - total flux cleaned = 0.0010337 Jy ! Component: 2100 - total flux cleaned = 0.000992185 Jy ! Component: 2150 - total flux cleaned = 0.00100248 Jy ! Component: 2200 - total flux cleaned = 0.00100248 Jy ! Component: 2250 - total flux cleaned = 0.00100234 Jy ! Component: 2300 - total flux cleaned = 0.000972121 Jy ! Component: 2350 - total flux cleaned = 0.00100204 Jy ! Component: 2400 - total flux cleaned = 0.000992128 Jy ! Component: 2450 - total flux cleaned = 0.000982259 Jy ! Component: 2500 - total flux cleaned = 0.00097265 Jy ! Component: 2550 - total flux cleaned = 0.000982219 Jy ! Component: 2600 - total flux cleaned = 0.000924845 Jy ! Component: 2650 - total flux cleaned = 0.0009439 Jy ! Component: 2700 - total flux cleaned = 0.000925046 Jy ! Component: 2750 - total flux cleaned = 0.000934314 Jy ! Component: 2800 - total flux cleaned = 0.000915748 Jy ! Component: 2850 - total flux cleaned = 0.000897364 Jy ! Component: 2900 - total flux cleaned = 0.000924694 Jy ! Component: 2950 - total flux cleaned = 0.00087943 Jy ! Component: 3000 - total flux cleaned = 0.000825517 Jy ! Component: 3050 - total flux cleaned = 0.000878975 Jy ! Component: 3100 - total flux cleaned = 0.000834727 Jy ! Component: 3150 - total flux cleaned = 0.00080848 Jy ! Component: 3200 - total flux cleaned = 0.000799715 Jy ! Component: 3250 - total flux cleaned = 0.000782324 Jy ! Component: 3300 - total flux cleaned = 0.000765253 Jy ! Component: 3350 - total flux cleaned = 0.000773715 Jy ! Component: 3400 - total flux cleaned = 0.000773615 Jy ! Component: 3450 - total flux cleaned = 0.000748408 Jy ! Component: 3500 - total flux cleaned = 0.000731752 Jy ! Component: 3550 - total flux cleaned = 0.000698517 Jy ! Component: 3600 - total flux cleaned = 0.0007314 Jy ! Component: 3650 - total flux cleaned = 0.00067418 Jy ! Component: 3700 - total flux cleaned = 0.000649777 Jy ! Component: 3750 - total flux cleaned = 0.000641693 Jy ! Component: 3800 - total flux cleaned = 0.000641677 Jy ! Component: 3850 - total flux cleaned = 0.000609745 Jy ! Component: 3900 - total flux cleaned = 0.000609784 Jy ! Component: 3950 - total flux cleaned = 0.000586187 Jy ! Component: 4000 - total flux cleaned = 0.000594027 Jy ! Component: 4050 - total flux cleaned = 0.000586252 Jy ! Total flux subtracted in 4096 components = 0.000601692 Jy ! Clean residual min=-0.000461 max=0.000499 Jy/beam ! Clean residual mean=0.000002 rms=0.000143 Jy/beam ! Combined flux in latest and established models = 0.0518763 Jy keep ! Adding 291 model components to the UV plane model. ! The established model now contains 339 components and 0.0518763 Jy ![Exited script file: muppet] wmap "J1630+0015_S_2014_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.486 x 7.742 at -3.629 degrees (North through East) ! Clean map min=-0.00092417 max=0.049326 Jy/beam ! Writing clean map to FITS file: J1630+0015_S_2014_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0493258 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000142974 device "J1630+0015_S_2014_05_31_pus\_map.eps/VPS" ! Attempting to open device: 'J1630+0015_S_2014_05_31_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.86957 0.86957 1.73914 3.47828 6.95656 13.9131 27.8262 55.6525 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.049 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.486 x 7.742 at -3.629 degrees (North through East) ! Clean map min=-0.00092417 max=0.049326 Jy/beam quit ! Quitting program ! Log file J1630+0015_S_2014_05_31_pus_uvs.log closed on Mon Nov 28 15:32:13 2016