! Started logfile: J1628+7706_S_2014_06_09_pus_uvs.log on Wed Nov 16 19:58:39 2016 obs J1628+7706_S_2014_06_09_pus_uva.fits ! Reading UV FITS file: J1628+7706_S_2014_06_09_pus_uva.fits ! AN table 1: 121 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.703214 visibilities/baseline/integration-bin. ! Found source: J1628+7706 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 336 lines of history. ! ! Reading 15316 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1628+7706_S_2014_06_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 188 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 188 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 188 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 188 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.998176Jy sigma=0.010716 ! Fit after self-cal, rms=0.958385Jy sigma=0.010334 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.539 mas, bmaj=9.118 mas, bpa=24.08 degrees ! Estimated noise=1019.33 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0321364 Jy ! Component: 100 - total flux cleaned = 0.0397673 Jy ! Total flux subtracted in 100 components = 0.0397673 Jy ! Clean residual min=-0.003715 max=0.004462 Jy/beam ! Clean residual mean=-0.000010 rms=0.000942 Jy/beam ! Combined flux in latest and established models = 0.0397673 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.0397673 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078193Jy sigma=0.000765 ! Fit after self-cal, rms=0.077222Jy sigma=0.000756 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.308 mas, bmaj=9.964 mas, bpa=19.88 degrees ! Estimated noise=542.029 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00574834 Jy ! Component: 100 - total flux cleaned = 0.0084144 Jy ! Component: 150 - total flux cleaned = 0.00992865 Jy ! Component: 200 - total flux cleaned = 0.0108152 Jy ! Total flux subtracted in 200 components = 0.0108152 Jy ! Clean residual min=-0.003019 max=0.002866 Jy/beam ! Clean residual mean=-0.000025 rms=0.000655 Jy/beam ! Combined flux in latest and established models = 0.0505825 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 31 components and 0.0505825 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076735Jy sigma=0.000752 ! Fit after self-cal, rms=0.076750Jy sigma=0.000751 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.77 HN 1.08 KP 1.10 ! LA 1.15 MK 1.10 NL 1.10 OV 1.02 ! PT 0.99 SC 0.86 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.06 KP 1.07 ! LA 1.10 MK 0.98 NL 1.13 OV 1.01 ! PT 0.94 SC 0.88 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.08 HN 1.09 KP 0.95 ! LA 0.96 MK 1.01 NL 1.05 OV 0.95 ! PT 0.98 SC 0.86 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 1.08 KP 0.93 ! LA 0.85 MK 1.13 NL 1.22 OV 0.92 ! PT 0.93 SC 0.88 ! ! ! Fit before self-cal, rms=0.076750Jy sigma=0.000751 ! Fit after self-cal, rms=0.074492Jy sigma=0.000749 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.274 mas, bmaj=9.97 mas, bpa=19.86 degrees ! Estimated noise=542.893 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4, -125.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00161265 Jy ! Component: 100 - total flux cleaned = 0.00186221 Jy ! Component: 150 - total flux cleaned = 0.00210141 Jy ! Component: 200 - total flux cleaned = 0.00225939 Jy ! Total flux subtracted in 200 components = 0.00225939 Jy ! Clean residual min=-0.002171 max=0.002099 Jy/beam ! Clean residual mean=-0.000008 rms=0.000524 Jy/beam ! Combined flux in latest and established models = 0.0528419 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 50 components and 0.0528419 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074375Jy sigma=0.000747 ! Fit after self-cal, rms=0.074336Jy sigma=0.000746 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074336Jy sigma=0.000746 ! Fit after self-cal, rms=0.072806Jy sigma=0.000745 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.258 mas, bmaj=9.855 mas, bpa=19.48 degrees ! Estimated noise=541.563 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00085426 Jy ! Component: 100 - total flux cleaned = 0.00106896 Jy ! Component: 150 - total flux cleaned = 0.00109655 Jy ! Component: 200 - total flux cleaned = 0.00109766 Jy ! Total flux subtracted in 200 components = 0.00109766 Jy ! Clean residual min=-0.001430 max=0.001849 Jy/beam ! Clean residual mean=-0.000003 rms=0.000446 Jy/beam ! Combined flux in latest and established models = 0.0539396 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 66 components and 0.0539396 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072777Jy sigma=0.000745 ! Fit after self-cal, rms=0.072785Jy sigma=0.000745 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000121745 Jy ! Component: 100 - total flux cleaned = 0.000124768 Jy ! Component: 150 - total flux cleaned = 0.000124051 Jy ! Component: 200 - total flux cleaned = 0.000125197 Jy ! Total flux subtracted in 200 components = 0.000125197 Jy ! Clean residual min=-0.001408 max=0.001824 Jy/beam ! Clean residual mean=-0.000002 rms=0.000445 Jy/beam ! Combined flux in latest and established models = 0.0540648 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 75 components and 0.0540648 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072769Jy sigma=0.000744 ! Fit after self-cal, rms=0.072762Jy sigma=0.000744 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072762Jy sigma=0.000744 ! Fit after self-cal, rms=0.072404Jy sigma=0.000744 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.229 mas, bmaj=9.789 mas, bpa=19.42 degrees ! Estimated noise=540.043 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000818876 Jy ! Component: 100 - total flux cleaned = 0.00105193 Jy ! Component: 150 - total flux cleaned = 0.00107345 Jy ! Component: 200 - total flux cleaned = 0.00107349 Jy ! Total flux subtracted in 200 components = 0.00107349 Jy ! Clean residual min=-0.001371 max=0.001719 Jy/beam ! Clean residual mean=-0.000003 rms=0.000428 Jy/beam ! Combined flux in latest and established models = 0.0551383 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 80 components and 0.0551383 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072387Jy sigma=0.000744 ! Fit after self-cal, rms=0.072387Jy sigma=0.000744 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000184192 Jy ! Component: 100 - total flux cleaned = 0.000164366 Jy ! Component: 150 - total flux cleaned = 0.000164838 Jy ! Component: 200 - total flux cleaned = 0.000147507 Jy ! Total flux subtracted in 200 components = 0.000147507 Jy ! Clean residual min=-0.001365 max=0.001715 Jy/beam ! Clean residual mean=-0.000002 rms=0.000431 Jy/beam ! Combined flux in latest and established models = 0.0552858 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 84 components and 0.0552858 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072378Jy sigma=0.000744 ! Fit after self-cal, rms=0.072377Jy sigma=0.000744 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072377Jy sigma=0.000744 ! Fit after self-cal, rms=0.072144Jy sigma=0.000744 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.115 mas, bmaj=17.31 mas, bpa=9.639 degrees ! Estimated noise=688.349 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000725644 Jy ! Component: 100 - total flux cleaned = 0.000885031 Jy ! Component: 150 - total flux cleaned = 0.000922786 Jy ! Component: 200 - total flux cleaned = 0.000946777 Jy ! Total flux subtracted in 200 components = 0.000946777 Jy ! Clean residual min=-0.001743 max=0.001994 Jy/beam ! Clean residual mean=-0.000009 rms=0.000579 Jy/beam ! Combined flux in latest and established models = 0.0562326 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 92 components and 0.0562325 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072138Jy sigma=0.000744 ! Fit after self-cal, rms=0.072137Jy sigma=0.000744 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000164366 Jy ! Component: 100 - total flux cleaned = 0.000164564 Jy ! Component: 150 - total flux cleaned = 0.000140266 Jy ! Component: 200 - total flux cleaned = 0.000118787 Jy ! Total flux subtracted in 200 components = 0.000118787 Jy ! Clean residual min=-0.001730 max=0.002021 Jy/beam ! Clean residual mean=-0.000008 rms=0.000583 Jy/beam ! Combined flux in latest and established models = 0.0563513 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 99 components and 0.0563513 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072136Jy sigma=0.000744 ! Fit after self-cal, rms=0.072135Jy sigma=0.000744 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.209 mas, bmaj=9.74 mas, bpa=19.36 degrees ! Estimated noise=539.127 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.209 x 9.74 at 19.36 degrees (North through East) ! Clean map min=-0.0024632 max=0.04474 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.479 mas, bmaj=8.913 mas, bpa=23.86 degrees ! Estimated noise=991.554 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0319359 Jy ! Component: 100 - total flux cleaned = 0.0413555 Jy ! Component: 150 - total flux cleaned = 0.0469959 Jy ! Component: 200 - total flux cleaned = 0.0496901 Jy ! Total flux subtracted in 200 components = 0.0496901 Jy ! Clean residual min=-0.003622 max=0.003481 Jy/beam ! Clean residual mean=-0.000003 rms=0.000894 Jy/beam ! Combined flux in latest and established models = 0.0496901 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.0496901 Jy ! Inverting map and beam ! Estimated beam: bmin=3.209 mas, bmaj=9.74 mas, bpa=19.36 degrees ! Estimated noise=539.127 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00356927 Jy ! Component: 100 - total flux cleaned = 0.00455238 Jy ! Component: 150 - total flux cleaned = 0.00506855 Jy ! Component: 200 - total flux cleaned = 0.00544928 Jy ! Total flux subtracted in 200 components = 0.00544928 Jy ! Clean residual min=-0.001645 max=0.001962 Jy/beam ! Clean residual mean=-0.000011 rms=0.000476 Jy/beam ! Combined flux in latest and established models = 0.0551393 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 47 components and 0.0551393 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.115 mas, bmaj=17.31 mas, bpa=9.639 degrees ! Estimated noise=688.349 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000640203 Jy ! Component: 100 - total flux cleaned = 0.000687114 Jy ! Component: 150 - total flux cleaned = 0.000761727 Jy ! Component: 200 - total flux cleaned = 0.000827243 Jy ! Total flux subtracted in 200 components = 0.000827243 Jy ! Clean residual min=-0.001888 max=0.001996 Jy/beam ! Clean residual mean=-0.000015 rms=0.000617 Jy/beam ! Combined flux in latest and established models = 0.0559666 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.35432e-05 Jy ! Component: 100 - total flux cleaned = 0.000130662 Jy ! Component: 150 - total flux cleaned = 0.000171449 Jy ! Component: 200 - total flux cleaned = 0.000188812 Jy ! Total flux subtracted in 200 components = 0.000188812 Jy ! Clean residual min=-0.001833 max=0.001985 Jy/beam ! Clean residual mean=-0.000013 rms=0.000599 Jy/beam ! Combined flux in latest and established models = 0.0561554 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 95 components and 0.0561554 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.209 mas, bmaj=9.74 mas, bpa=19.36 degrees ! Estimated noise=539.127 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000155815 Jy ! Component: 100 - total flux cleaned = 0.000158408 Jy ! Component: 150 - total flux cleaned = 0.000182954 Jy ! Component: 200 - total flux cleaned = 0.000183829 Jy ! Total flux subtracted in 200 components = 0.000183829 Jy ! Clean residual min=-0.001448 max=0.001728 Jy/beam ! Clean residual mean=-0.000004 rms=0.000430 Jy/beam ! Combined flux in latest and established models = 0.0563392 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 112 components and 0.0563392 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072150Jy sigma=0.000744 ! Fit after self-cal, rms=0.072138Jy sigma=0.000744 wmodel J1628+7706_S_2014_06_09_pus_map.mod ! Writing 112 model components to file: J1628+7706_S_2014_06_09_pus_map.mod wobs J1628+7706_S_2014_06_09_pus_uvs.fits ! Writing UV FITS file: J1628+7706_S_2014_06_09_pus_uvs.fits wwins J1628+7706_S_2014_06_09_pus_map.win ! wwins: Wrote 2 windows to J1628+7706_S_2014_06_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000775685 Jy ! Component: 100 - total flux cleaned = 0.00135913 Jy ! Component: 150 - total flux cleaned = 0.00185332 Jy ! Component: 200 - total flux cleaned = 0.00215022 Jy ! Component: 250 - total flux cleaned = 0.00231594 Jy ! Component: 300 - total flux cleaned = 0.00245175 Jy ! Component: 350 - total flux cleaned = 0.00256051 Jy ! Component: 400 - total flux cleaned = 0.00264525 Jy ! Component: 450 - total flux cleaned = 0.00272737 Jy ! Component: 500 - total flux cleaned = 0.00280673 Jy ! Component: 550 - total flux cleaned = 0.00286453 Jy ! Component: 600 - total flux cleaned = 0.00295861 Jy ! Component: 650 - total flux cleaned = 0.00303217 Jy ! Component: 700 - total flux cleaned = 0.00312177 Jy ! Component: 750 - total flux cleaned = 0.0031744 Jy ! Component: 800 - total flux cleaned = 0.00324322 Jy ! Component: 850 - total flux cleaned = 0.00332759 Jy ! Component: 900 - total flux cleaned = 0.00336052 Jy ! Component: 950 - total flux cleaned = 0.00337685 Jy ! Component: 1000 - total flux cleaned = 0.00345681 Jy ! Component: 1050 - total flux cleaned = 0.0035195 Jy ! Component: 1100 - total flux cleaned = 0.00358085 Jy ! Component: 1150 - total flux cleaned = 0.00356583 Jy ! Component: 1200 - total flux cleaned = 0.00361061 Jy ! Component: 1250 - total flux cleaned = 0.00362538 Jy ! Component: 1300 - total flux cleaned = 0.00365435 Jy ! Component: 1350 - total flux cleaned = 0.00369716 Jy ! Component: 1400 - total flux cleaned = 0.00371119 Jy ! Component: 1450 - total flux cleaned = 0.00373875 Jy ! Component: 1500 - total flux cleaned = 0.00372507 Jy ! Component: 1550 - total flux cleaned = 0.00375207 Jy ! Component: 1600 - total flux cleaned = 0.00372529 Jy ! Component: 1650 - total flux cleaned = 0.00372537 Jy ! Component: 1700 - total flux cleaned = 0.00372531 Jy ! Component: 1750 - total flux cleaned = 0.00368668 Jy ! Component: 1800 - total flux cleaned = 0.00371217 Jy ! Component: 1850 - total flux cleaned = 0.00362447 Jy ! Component: 1900 - total flux cleaned = 0.00361217 Jy ! Component: 1950 - total flux cleaned = 0.00359982 Jy ! Component: 2000 - total flux cleaned = 0.00357571 Jy ! Component: 2050 - total flux cleaned = 0.00355196 Jy ! Component: 2100 - total flux cleaned = 0.00355188 Jy ! Component: 2150 - total flux cleaned = 0.00357483 Jy ! Component: 2200 - total flux cleaned = 0.00351697 Jy ! Component: 2250 - total flux cleaned = 0.00349406 Jy ! Component: 2300 - total flux cleaned = 0.00348296 Jy ! Component: 2350 - total flux cleaned = 0.00349425 Jy ! Component: 2400 - total flux cleaned = 0.00352733 Jy ! Component: 2450 - total flux cleaned = 0.00349452 Jy ! Component: 2500 - total flux cleaned = 0.00353805 Jy ! Component: 2550 - total flux cleaned = 0.00355959 Jy ! Component: 2600 - total flux cleaned = 0.00357032 Jy ! Component: 2650 - total flux cleaned = 0.00363374 Jy ! Component: 2700 - total flux cleaned = 0.00358136 Jy ! Component: 2750 - total flux cleaned = 0.00362302 Jy ! Component: 2800 - total flux cleaned = 0.00367452 Jy ! Component: 2850 - total flux cleaned = 0.00368459 Jy ! Component: 2900 - total flux cleaned = 0.0037049 Jy ! Component: 2950 - total flux cleaned = 0.00370496 Jy ! Component: 3000 - total flux cleaned = 0.003755 Jy ! Component: 3050 - total flux cleaned = 0.00373525 Jy ! Component: 3100 - total flux cleaned = 0.00379442 Jy ! Component: 3150 - total flux cleaned = 0.00381388 Jy ! Component: 3200 - total flux cleaned = 0.00378492 Jy ! Component: 3250 - total flux cleaned = 0.00383289 Jy ! Component: 3300 - total flux cleaned = 0.00384245 Jy ! Component: 3350 - total flux cleaned = 0.00387081 Jy ! Component: 3400 - total flux cleaned = 0.0038991 Jy ! Component: 3450 - total flux cleaned = 0.00391772 Jy ! Component: 3500 - total flux cleaned = 0.00393624 Jy ! Component: 3550 - total flux cleaned = 0.00392691 Jy ! Component: 3600 - total flux cleaned = 0.00396346 Jy ! Component: 3650 - total flux cleaned = 0.00397257 Jy ! Component: 3700 - total flux cleaned = 0.00396354 Jy ! Component: 3750 - total flux cleaned = 0.00396353 Jy ! Component: 3800 - total flux cleaned = 0.0039725 Jy ! Component: 3850 - total flux cleaned = 0.00395484 Jy ! Component: 3900 - total flux cleaned = 0.00394613 Jy ! Component: 3950 - total flux cleaned = 0.0039897 Jy ! Component: 4000 - total flux cleaned = 0.00397243 Jy ! Component: 4050 - total flux cleaned = 0.00395535 Jy ! Total flux subtracted in 4096 components = 0.00394687 Jy ! Clean residual min=-0.000544 max=0.000471 Jy/beam ! Clean residual mean=-0.000002 rms=0.000157 Jy/beam ! Combined flux in latest and established models = 0.0602861 Jy keep ! Adding 269 model components to the UV plane model. ! The established model now contains 381 components and 0.0602861 Jy ![Exited script file: muppet] wmap "J1628+7706_S_2014_06_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.209 x 9.74 at 19.36 degrees (North through East) ! Clean map min=-0.0023503 max=0.044325 Jy/beam ! Writing clean map to FITS file: J1628+7706_S_2014_06_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0443253 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000155615 device "J1628+7706_S_2014_06_09_pus\_map.eps/VPS" ! Attempting to open device: 'J1628+7706_S_2014_06_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.05323 1.05323 2.10645 4.2129 8.4258 16.8516 33.7032 67.4064 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.044 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.209 x 9.74 at 19.36 degrees (North through East) ! Clean map min=-0.0023503 max=0.044325 Jy/beam quit ! Quitting program ! Log file J1628+7706_S_2014_06_09_pus_uvs.log closed on Wed Nov 16 19:58:43 2016