! Started logfile: J1628+4734_S_2015_01_22_pus_uvs.log on Tue Jan 3 22:59:17 2017 obs J1628+4734_S_2015_01_22_pus_uva.fits ! Reading UV FITS file: J1628+4734_S_2015_01_22_pus_uva.fits ! AN table 1: 63 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.622222 visibilities/baseline/integration-bin. ! Found source: J1628+4734 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 281 lines of history. ! ! Reading 7056 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1628+4734_S_2015_01_22_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 126 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 126 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 126 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 126 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.874019Jy sigma=0.011203 ! Fit after self-cal, rms=0.840699Jy sigma=0.010793 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.28 mas, bmaj=10.24 mas, bpa=27.31 degrees ! Estimated noise=1392.81 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.115816 Jy ! Component: 100 - total flux cleaned = 0.146111 Jy ! Total flux subtracted in 100 components = 0.146111 Jy ! Clean residual min=-0.010840 max=0.013856 Jy/beam ! Clean residual mean=-0.000008 rms=0.002918 Jy/beam ! Combined flux in latest and established models = 0.146111 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.146111 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075525Jy sigma=0.000889 ! Fit after self-cal, rms=0.075500Jy sigma=0.000888 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.038 mas, bmaj=10.36 mas, bpa=26.87 degrees ! Estimated noise=668.688 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0223344 Jy ! Component: 100 - total flux cleaned = 0.0351222 Jy ! Component: 150 - total flux cleaned = 0.0435031 Jy ! Component: 200 - total flux cleaned = 0.0493192 Jy ! Total flux subtracted in 200 components = 0.0493192 Jy ! Clean residual min=-0.005846 max=0.005170 Jy/beam ! Clean residual mean=-0.000003 rms=0.001449 Jy/beam ! Combined flux in latest and established models = 0.195431 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 57 components and 0.195431 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067502Jy sigma=0.000793 ! Fit after self-cal, rms=0.067489Jy sigma=0.000793 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00* HN 1.00* KP 1.07 ! LA 1.02 MK 1.01 NL 1.06 OV 0.93 ! PT 1.02 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00* HN 1.00* KP 1.01 ! LA 1.01 MK 1.02 NL 1.07 OV 0.95 ! PT 1.01 SC 1.12 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.00* HN 1.00* KP 0.87 ! LA 0.82 MK 1.07 NL 1.08 OV 0.91 ! PT 1.01 SC 1.04 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.00* HN 1.00* KP 0.82 ! LA 0.89 MK 1.05 NL 1.00 OV 0.98 ! PT 1.09 SC 1.02 ! ! ! Fit before self-cal, rms=0.067489Jy sigma=0.000793 ! Fit after self-cal, rms=0.063617Jy sigma=0.000761 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.095 mas, bmaj=10.46 mas, bpa=26.87 degrees ! Estimated noise=668.63 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000179329 Jy ! Component: 100 - total flux cleaned = -4.16867e-05 Jy ! Component: 150 - total flux cleaned = -3.91303e-05 Jy ! Component: 200 - total flux cleaned = -6.8576e-06 Jy ! Total flux subtracted in 200 components = -6.8576e-06 Jy ! Clean residual min=-0.002053 max=0.002054 Jy/beam ! Clean residual mean=-0.000002 rms=0.000583 Jy/beam ! Combined flux in latest and established models = 0.195424 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 73 components and 0.195424 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063556Jy sigma=0.000761 ! Fit after self-cal, rms=0.063550Jy sigma=0.000760 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063550Jy sigma=0.000760 ! Fit after self-cal, rms=0.063750Jy sigma=0.000760 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.104 mas, bmaj=10.44 mas, bpa=26.88 degrees ! Estimated noise=669.786 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000124539 Jy ! Component: 100 - total flux cleaned = 0.000239911 Jy ! Component: 150 - total flux cleaned = 0.000315592 Jy ! Component: 200 - total flux cleaned = 0.000337245 Jy ! Total flux subtracted in 200 components = 0.000337245 Jy ! Clean residual min=-0.002052 max=0.002015 Jy/beam ! Clean residual mean=-0.000002 rms=0.000562 Jy/beam ! Combined flux in latest and established models = 0.195761 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 81 components and 0.195761 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063726Jy sigma=0.000760 ! Fit after self-cal, rms=0.063727Jy sigma=0.000760 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.83634e-05 Jy ! Component: 100 - total flux cleaned = 7.74063e-05 Jy ! Component: 150 - total flux cleaned = 9.43629e-05 Jy ! Component: 200 - total flux cleaned = 9.46374e-05 Jy ! Total flux subtracted in 200 components = 9.46374e-05 Jy ! Clean residual min=-0.002034 max=0.001992 Jy/beam ! Clean residual mean=-0.000002 rms=0.000555 Jy/beam ! Combined flux in latest and established models = 0.195856 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 88 components and 0.195856 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063717Jy sigma=0.000760 ! Fit after self-cal, rms=0.063717Jy sigma=0.000760 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063717Jy sigma=0.000760 ! Fit after self-cal, rms=0.063829Jy sigma=0.000760 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.108 mas, bmaj=10.43 mas, bpa=26.89 degrees ! Estimated noise=670.259 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000256519 Jy ! Component: 100 - total flux cleaned = 0.000398195 Jy ! Component: 150 - total flux cleaned = 0.000428104 Jy ! Component: 200 - total flux cleaned = 0.000442709 Jy ! Total flux subtracted in 200 components = 0.000442709 Jy ! Clean residual min=-0.002018 max=0.002019 Jy/beam ! Clean residual mean=-0.000002 rms=0.000539 Jy/beam ! Combined flux in latest and established models = 0.196298 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 94 components and 0.196298 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063821Jy sigma=0.000760 ! Fit after self-cal, rms=0.063822Jy sigma=0.000760 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.76011e-05 Jy ! Component: 100 - total flux cleaned = 1.22767e-05 Jy ! Component: 150 - total flux cleaned = 1.23999e-05 Jy ! Component: 200 - total flux cleaned = 1.27909e-05 Jy ! Total flux subtracted in 200 components = 1.27909e-05 Jy ! Clean residual min=-0.001997 max=0.002003 Jy/beam ! Clean residual mean=-0.000002 rms=0.000535 Jy/beam ! Combined flux in latest and established models = 0.196311 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 97 components and 0.196311 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063818Jy sigma=0.000760 ! Fit after self-cal, rms=0.063818Jy sigma=0.000760 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063818Jy sigma=0.000760 ! Fit after self-cal, rms=0.063888Jy sigma=0.000760 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.27 mas, bmaj=10.68 mas, bpa=23.91 degrees ! Estimated noise=814.416 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000385477 Jy ! Component: 100 - total flux cleaned = 0.000452586 Jy ! Component: 150 - total flux cleaned = 0.000469234 Jy ! Component: 200 - total flux cleaned = 0.000483714 Jy ! Total flux subtracted in 200 components = 0.000483714 Jy ! Clean residual min=-0.002057 max=0.002218 Jy/beam ! Clean residual mean=-0.000005 rms=0.000639 Jy/beam ! Combined flux in latest and established models = 0.196795 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 102 components and 0.196795 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063892Jy sigma=0.000760 ! Fit after self-cal, rms=0.063891Jy sigma=0.000760 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.84891e-06 Jy ! Component: 100 - total flux cleaned = 8.27167e-06 Jy ! Component: 150 - total flux cleaned = 1.87421e-05 Jy ! Component: 200 - total flux cleaned = 1.84295e-05 Jy ! Total flux subtracted in 200 components = 1.84295e-05 Jy ! Clean residual min=-0.002008 max=0.002188 Jy/beam ! Clean residual mean=-0.000005 rms=0.000630 Jy/beam ! Combined flux in latest and established models = 0.196813 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 107 components and 0.196813 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063896Jy sigma=0.000760 ! Fit after self-cal, rms=0.063894Jy sigma=0.000760 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.11 mas, bmaj=10.42 mas, bpa=26.9 degrees ! Estimated noise=670.547 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.11 x 10.42 at 26.9 degrees (North through East) ! Clean map min=-0.0018682 max=0.15998 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.316 mas, bmaj=10.31 mas, bpa=27.33 degrees ! Estimated noise=1432.58 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.118941 Jy ! Component: 100 - total flux cleaned = 0.14914 Jy ! Component: 150 - total flux cleaned = 0.164603 Jy ! Component: 200 - total flux cleaned = 0.174154 Jy ! Total flux subtracted in 200 components = 0.174154 Jy ! Clean residual min=-0.006294 max=0.005686 Jy/beam ! Clean residual mean=-0.000003 rms=0.001418 Jy/beam ! Combined flux in latest and established models = 0.174154 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.174154 Jy ! Inverting map and beam ! Estimated beam: bmin=3.11 mas, bmaj=10.42 mas, bpa=26.9 degrees ! Estimated noise=670.547 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00850775 Jy ! Component: 100 - total flux cleaned = 0.0134652 Jy ! Component: 150 - total flux cleaned = 0.0166602 Jy ! Component: 200 - total flux cleaned = 0.0188149 Jy ! Total flux subtracted in 200 components = 0.0188149 Jy ! Clean residual min=-0.002394 max=0.002153 Jy/beam ! Clean residual mean=-0.000003 rms=0.000612 Jy/beam ! Combined flux in latest and established models = 0.192969 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 57 components and 0.192969 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.27 mas, bmaj=10.68 mas, bpa=23.91 degrees ! Estimated noise=814.416 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00172951 Jy ! Component: 100 - total flux cleaned = 0.00275062 Jy ! Component: 150 - total flux cleaned = 0.00301084 Jy ! Component: 200 - total flux cleaned = 0.00313189 Jy ! Total flux subtracted in 200 components = 0.00313189 Jy ! Clean residual min=-0.002080 max=0.002199 Jy/beam ! Clean residual mean=-0.000005 rms=0.000638 Jy/beam ! Combined flux in latest and established models = 0.196101 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.60015e-05 Jy ! Component: 100 - total flux cleaned = 0.00016317 Jy ! Component: 150 - total flux cleaned = 0.000248101 Jy ! Component: 200 - total flux cleaned = 0.000294848 Jy ! Total flux subtracted in 200 components = 0.000294848 Jy ! Clean residual min=-0.002019 max=0.002143 Jy/beam ! Clean residual mean=-0.000005 rms=0.000615 Jy/beam ! Combined flux in latest and established models = 0.196396 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 83 components and 0.196396 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.11 mas, bmaj=10.42 mas, bpa=26.9 degrees ! Estimated noise=670.547 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000377388 Jy ! Component: 100 - total flux cleaned = -0.000279202 Jy ! Component: 150 - total flux cleaned = -0.000236647 Jy ! Component: 200 - total flux cleaned = -0.000197599 Jy ! Total flux subtracted in 200 components = -0.000197599 Jy ! Clean residual min=-0.002016 max=0.002072 Jy/beam ! Clean residual mean=-0.000002 rms=0.000540 Jy/beam ! Combined flux in latest and established models = 0.196198 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 94 components and 0.196198 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063959Jy sigma=0.000760 ! Fit after self-cal, rms=0.063948Jy sigma=0.000760 wmodel J1628+4734_S_2015_01_22_pus_map.mod ! Writing 94 model components to file: J1628+4734_S_2015_01_22_pus_map.mod wobs J1628+4734_S_2015_01_22_pus_uvs.fits ! Writing UV FITS file: J1628+4734_S_2015_01_22_pus_uvs.fits wwins J1628+4734_S_2015_01_22_pus_map.win ! wwins: Wrote 1 windows to J1628+4734_S_2015_01_22_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -5.45456e-05 Jy ! Component: 100 - total flux cleaned = -0.000567356 Jy ! Component: 150 - total flux cleaned = -0.000946802 Jy ! Component: 200 - total flux cleaned = -0.00109515 Jy ! Component: 250 - total flux cleaned = -0.00123578 Jy ! Component: 300 - total flux cleaned = -0.00134215 Jy ! Component: 350 - total flux cleaned = -0.00139264 Jy ! Component: 400 - total flux cleaned = -0.00151327 Jy ! Component: 450 - total flux cleaned = -0.00155903 Jy ! Component: 500 - total flux cleaned = -0.00158201 Jy ! Component: 550 - total flux cleaned = -0.00158213 Jy ! Component: 600 - total flux cleaned = -0.00164334 Jy ! Component: 650 - total flux cleaned = -0.00166314 Jy ! Component: 700 - total flux cleaned = -0.00170187 Jy ! Component: 750 - total flux cleaned = -0.00172091 Jy ! Component: 800 - total flux cleaned = -0.00181248 Jy ! Component: 850 - total flux cleaned = -0.0018657 Jy ! Component: 900 - total flux cleaned = -0.00190006 Jy ! Component: 950 - total flux cleaned = -0.00198413 Jy ! Component: 1000 - total flux cleaned = -0.00204997 Jy ! Component: 1050 - total flux cleaned = -0.00203423 Jy ! Component: 1100 - total flux cleaned = -0.00205012 Jy ! Component: 1150 - total flux cleaned = -0.0020654 Jy ! Component: 1200 - total flux cleaned = -0.00203474 Jy ! Component: 1250 - total flux cleaned = -0.00199018 Jy ! Component: 1300 - total flux cleaned = -0.00197574 Jy ! Component: 1350 - total flux cleaned = -0.00194685 Jy ! Component: 1400 - total flux cleaned = -0.00190418 Jy ! Component: 1450 - total flux cleaned = -0.00187629 Jy ! Component: 1500 - total flux cleaned = -0.00183457 Jy ! Component: 1550 - total flux cleaned = -0.00179367 Jy ! Component: 1600 - total flux cleaned = -0.00179379 Jy ! Component: 1650 - total flux cleaned = -0.00175378 Jy ! Component: 1700 - total flux cleaned = -0.00174048 Jy ! Component: 1750 - total flux cleaned = -0.00171443 Jy ! Component: 1800 - total flux cleaned = -0.00168872 Jy ! Component: 1850 - total flux cleaned = -0.00165082 Jy ! Component: 1900 - total flux cleaned = -0.0016009 Jy ! Component: 1950 - total flux cleaned = -0.00162552 Jy ! Component: 2000 - total flux cleaned = -0.00156433 Jy ! Component: 2050 - total flux cleaned = -0.00156434 Jy ! Component: 2100 - total flux cleaned = -0.00157621 Jy ! Component: 2150 - total flux cleaned = -0.00157612 Jy ! Component: 2200 - total flux cleaned = -0.00157616 Jy ! Component: 2250 - total flux cleaned = -0.00159956 Jy ! Component: 2300 - total flux cleaned = -0.00162275 Jy ! Component: 2350 - total flux cleaned = -0.00164566 Jy ! Component: 2400 - total flux cleaned = -0.0016457 Jy ! Component: 2450 - total flux cleaned = -0.00167958 Jy ! Component: 2500 - total flux cleaned = -0.00165703 Jy ! Component: 2550 - total flux cleaned = -0.00164604 Jy ! Component: 2600 - total flux cleaned = -0.00162395 Jy ! Component: 2650 - total flux cleaned = -0.00161293 Jy ! Component: 2700 - total flux cleaned = -0.00160188 Jy ! Component: 2750 - total flux cleaned = -0.00156917 Jy ! Component: 2800 - total flux cleaned = -0.00154747 Jy ! Component: 2850 - total flux cleaned = -0.00156901 Jy ! Component: 2900 - total flux cleaned = -0.00152598 Jy ! Component: 2950 - total flux cleaned = -0.00151528 Jy ! Component: 3000 - total flux cleaned = -0.00149399 Jy ! Component: 3050 - total flux cleaned = -0.00149397 Jy ! Component: 3100 - total flux cleaned = -0.00147276 Jy ! Component: 3150 - total flux cleaned = -0.00142005 Jy ! Component: 3200 - total flux cleaned = -0.00137803 Jy ! Component: 3250 - total flux cleaned = -0.00133608 Jy ! Component: 3300 - total flux cleaned = -0.00134651 Jy ! Component: 3350 - total flux cleaned = -0.00133605 Jy ! Component: 3400 - total flux cleaned = -0.00129438 Jy ! Component: 3450 - total flux cleaned = -0.00127359 Jy ! Component: 3500 - total flux cleaned = -0.00126324 Jy ! Component: 3550 - total flux cleaned = -0.00125284 Jy ! Component: 3600 - total flux cleaned = -0.00127351 Jy ! Component: 3650 - total flux cleaned = -0.00126317 Jy ! Component: 3700 - total flux cleaned = -0.00124254 Jy ! Component: 3750 - total flux cleaned = -0.00124257 Jy ! Component: 3800 - total flux cleaned = -0.00123227 Jy ! Component: 3850 - total flux cleaned = -0.00124261 Jy ! Component: 3900 - total flux cleaned = -0.00123231 Jy ! Component: 3950 - total flux cleaned = -0.00120127 Jy ! Component: 4000 - total flux cleaned = -0.00119094 Jy ! Component: 4050 - total flux cleaned = -0.00114962 Jy ! Total flux subtracted in 4096 components = -0.00113936 Jy ! Clean residual min=-0.000564 max=0.000577 Jy/beam ! Clean residual mean=0.000002 rms=0.000175 Jy/beam ! Combined flux in latest and established models = 0.195059 Jy keep ! Adding 254 model components to the UV plane model. ! The established model now contains 348 components and 0.195059 Jy ![Exited script file: muppet] wmap "J1628+4734_S_2015_01_22_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.11 x 10.42 at 26.9 degrees (North through East) ! Clean map min=-0.001249 max=0.16048 Jy/beam ! Writing clean map to FITS file: J1628+4734_S_2015_01_22_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.160484 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000169041 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.315996 0.315996 0.631991 1.26398 2.52797 5.05593 10.1119 20.2237 40.4475 80.8949 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.16 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.11 x 10.42 at 26.9 degrees (North through East) ! Clean map min=-0.001249 max=0.16048 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1628+4734_S_2015_01_22_pus_uvs.log closed on Tue Jan 3 22:59:23 2017