! Started logfile: J1624+5652_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:31:19 2017 obs J1624+5652_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J1624+5652_S_2014_01_04_pus_uva.fits ! AN table 1: 43 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.777778 visibilities/baseline/integration-bin. ! Found source: J1624+5652 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 4816 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1624+5652_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 43 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 43 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 43 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 43 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.839591Jy sigma=0.011895 ! Fit after self-cal, rms=0.823632Jy sigma=0.011586 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.765 mas, bmaj=10.75 mas, bpa=52.91 degrees ! Estimated noise=1125.72 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.129334 Jy ! Component: 100 - total flux cleaned = 0.173879 Jy ! Total flux subtracted in 100 components = 0.173879 Jy ! Clean residual min=-0.012738 max=0.020182 Jy/beam ! Clean residual mean=-0.000185 rms=0.003690 Jy/beam ! Combined flux in latest and established models = 0.173879 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.173879 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088998Jy sigma=0.001111 ! Fit after self-cal, rms=0.088402Jy sigma=0.001107 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.357 mas, bmaj=11.31 mas, bpa=53.24 degrees ! Estimated noise=761.703 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0318453 Jy ! Component: 100 - total flux cleaned = 0.0476197 Jy ! Component: 150 - total flux cleaned = 0.0578623 Jy ! Component: 200 - total flux cleaned = 0.0654659 Jy ! Total flux subtracted in 200 components = 0.0654659 Jy ! Clean residual min=-0.007474 max=0.007321 Jy/beam ! Clean residual mean=-0.000183 rms=0.001861 Jy/beam ! Combined flux in latest and established models = 0.239345 Jy ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 58 components and 0.239345 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075477Jy sigma=0.000943 ! Fit after self-cal, rms=0.075007Jy sigma=0.000941 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.83 KP 1.00* LA 1.01 ! MK 1.03 NL 0.96 OV 0.97 PT 0.96 ! SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.00 KP 1.00* LA 0.96 ! MK 1.01 NL 1.04 OV 0.98 PT 0.94 ! SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.13 KP 1.00* LA 0.78 ! MK 1.04 NL 1.00 OV 0.93 PT 0.93 ! SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.00 KP 1.00* LA 0.88 ! MK 1.05 NL 1.08 OV 0.98 PT 0.97 ! SC 0.97 ! ! ! Fit before self-cal, rms=0.075007Jy sigma=0.000941 ! Fit after self-cal, rms=0.069951Jy sigma=0.000896 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.393 mas, bmaj=11.47 mas, bpa=53.1 degrees ! Estimated noise=751.546 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000149298 Jy ! Component: 100 - total flux cleaned = -0.000230092 Jy ! Component: 150 - total flux cleaned = -0.000376985 Jy ! Component: 200 - total flux cleaned = -0.000501202 Jy ! Total flux subtracted in 200 components = -0.000501202 Jy ! Clean residual min=-0.002606 max=0.002736 Jy/beam ! Clean residual mean=0.000002 rms=0.000636 Jy/beam ! Combined flux in latest and established models = 0.238844 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 72 components and 0.238844 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069880Jy sigma=0.000895 ! Fit after self-cal, rms=0.069674Jy sigma=0.000895 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069674Jy sigma=0.000895 ! Fit after self-cal, rms=0.069394Jy sigma=0.000895 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.384 mas, bmaj=11.48 mas, bpa=53.08 degrees ! Estimated noise=750.432 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.87799e-05 Jy ! Component: 100 - total flux cleaned = -0.000180383 Jy ! Component: 150 - total flux cleaned = -0.000296362 Jy ! Component: 200 - total flux cleaned = -0.000344761 Jy ! Total flux subtracted in 200 components = -0.000344761 Jy ! Clean residual min=-0.002185 max=0.002584 Jy/beam ! Clean residual mean=0.000002 rms=0.000591 Jy/beam ! Combined flux in latest and established models = 0.238499 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 82 components and 0.238499 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069354Jy sigma=0.000894 ! Fit after self-cal, rms=0.069319Jy sigma=0.000894 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.97272e-05 Jy ! Component: 100 - total flux cleaned = 2.32106e-05 Jy ! Component: 150 - total flux cleaned = -6.72115e-07 Jy ! Component: 200 - total flux cleaned = -5.90487e-05 Jy ! Total flux subtracted in 200 components = -5.90487e-05 Jy ! Clean residual min=-0.001961 max=0.002486 Jy/beam ! Clean residual mean=0.000002 rms=0.000567 Jy/beam ! Combined flux in latest and established models = 0.23844 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 87 components and 0.23844 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069296Jy sigma=0.000894 ! Fit after self-cal, rms=0.069279Jy sigma=0.000894 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069279Jy sigma=0.000894 ! Fit after self-cal, rms=0.069058Jy sigma=0.000894 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.375 mas, bmaj=11.49 mas, bpa=53.07 degrees ! Estimated noise=749.456 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.17245e-05 Jy ! Component: 100 - total flux cleaned = -0.000123796 Jy ! Component: 150 - total flux cleaned = -0.000161921 Jy ! Component: 200 - total flux cleaned = -0.000195921 Jy ! Total flux subtracted in 200 components = -0.000195921 Jy ! Clean residual min=-0.001914 max=0.002341 Jy/beam ! Clean residual mean=0.000002 rms=0.000548 Jy/beam ! Combined flux in latest and established models = 0.238244 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 94 components and 0.238244 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069040Jy sigma=0.000894 ! Fit after self-cal, rms=0.069029Jy sigma=0.000893 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.84688e-06 Jy ! Component: 100 - total flux cleaned = 1.10797e-05 Jy ! Component: 150 - total flux cleaned = -2.03976e-05 Jy ! Component: 200 - total flux cleaned = -3.51274e-05 Jy ! Total flux subtracted in 200 components = -3.51274e-05 Jy ! Clean residual min=-0.001911 max=0.002280 Jy/beam ! Clean residual mean=0.000002 rms=0.000538 Jy/beam ! Combined flux in latest and established models = 0.238209 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 99 components and 0.238209 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069018Jy sigma=0.000893 ! Fit after self-cal, rms=0.069013Jy sigma=0.000893 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069013Jy sigma=0.000893 ! Fit after self-cal, rms=0.068868Jy sigma=0.000893 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.01 mas, bmaj=11.54 mas, bpa=63.47 degrees ! Estimated noise=858.561 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.30708e-05 Jy ! Component: 100 - total flux cleaned = -0.000167948 Jy ! Component: 150 - total flux cleaned = -0.000258277 Jy ! Component: 200 - total flux cleaned = -0.000322546 Jy ! Total flux subtracted in 200 components = -0.000322546 Jy ! Clean residual min=-0.001962 max=0.002007 Jy/beam ! Clean residual mean=0.000002 rms=0.000558 Jy/beam ! Combined flux in latest and established models = 0.237887 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 118 components and 0.237887 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068864Jy sigma=0.000893 ! Fit after self-cal, rms=0.068860Jy sigma=0.000893 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.34777e-06 Jy ! Component: 100 - total flux cleaned = -2.77592e-05 Jy ! Component: 150 - total flux cleaned = -6.65654e-05 Jy ! Component: 200 - total flux cleaned = -0.000108254 Jy ! Total flux subtracted in 200 components = -0.000108254 Jy ! Clean residual min=-0.001952 max=0.001959 Jy/beam ! Clean residual mean=0.000001 rms=0.000553 Jy/beam ! Combined flux in latest and established models = 0.237778 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 125 components and 0.237778 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068857Jy sigma=0.000893 ! Fit after self-cal, rms=0.068856Jy sigma=0.000893 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.37 mas, bmaj=11.49 mas, bpa=53.06 degrees ! Estimated noise=748.9 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.37 x 11.49 at 53.06 degrees (North through East) ! Clean map min=-0.0018309 max=0.17675 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.756 mas, bmaj=10.93 mas, bpa=52.64 degrees ! Estimated noise=1126.3 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.129614 Jy ! Component: 100 - total flux cleaned = 0.176016 Jy ! Component: 150 - total flux cleaned = 0.199133 Jy ! Component: 200 - total flux cleaned = 0.211475 Jy ! Total flux subtracted in 200 components = 0.211475 Jy ! Clean residual min=-0.004270 max=0.005954 Jy/beam ! Clean residual mean=-0.000055 rms=0.001321 Jy/beam ! Combined flux in latest and established models = 0.211475 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.211475 Jy ! Inverting map and beam ! Estimated beam: bmin=3.37 mas, bmaj=11.49 mas, bpa=53.06 degrees ! Estimated noise=748.9 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00987775 Jy ! Component: 100 - total flux cleaned = 0.0155959 Jy ! Component: 150 - total flux cleaned = 0.0191713 Jy ! Component: 200 - total flux cleaned = 0.0216805 Jy ! Total flux subtracted in 200 components = 0.0216805 Jy ! Clean residual min=-0.002356 max=0.002664 Jy/beam ! Clean residual mean=-0.000027 rms=0.000653 Jy/beam ! Combined flux in latest and established models = 0.233156 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 40 components and 0.233156 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.01 mas, bmaj=11.54 mas, bpa=63.47 degrees ! Estimated noise=858.561 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00254084 Jy ! Component: 100 - total flux cleaned = 0.00383499 Jy ! Component: 150 - total flux cleaned = 0.00414616 Jy ! Component: 200 - total flux cleaned = 0.00423079 Jy ! Total flux subtracted in 200 components = 0.00423079 Jy ! Clean residual min=-0.001827 max=0.001905 Jy/beam ! Clean residual mean=-0.000004 rms=0.000566 Jy/beam ! Combined flux in latest and established models = 0.237386 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.91276e-05 Jy ! Component: 100 - total flux cleaned = 0.000128152 Jy ! Component: 150 - total flux cleaned = 0.000179203 Jy ! Component: 200 - total flux cleaned = 0.000237688 Jy ! Total flux subtracted in 200 components = 0.000237688 Jy ! Clean residual min=-0.001884 max=0.001905 Jy/beam ! Clean residual mean=-0.000001 rms=0.000550 Jy/beam ! Combined flux in latest and established models = 0.237624 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 76 components and 0.237624 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.37 mas, bmaj=11.49 mas, bpa=53.06 degrees ! Estimated noise=748.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000137783 Jy ! Component: 100 - total flux cleaned = 0.000105419 Jy ! Component: 150 - total flux cleaned = 0.000101373 Jy ! Component: 200 - total flux cleaned = 0.000198901 Jy ! Total flux subtracted in 200 components = 0.000198901 Jy ! Clean residual min=-0.001898 max=0.002215 Jy/beam ! Clean residual mean=0.000000 rms=0.000523 Jy/beam ! Combined flux in latest and established models = 0.237823 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 93 components and 0.237823 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068851Jy sigma=0.000893 ! Fit after self-cal, rms=0.068835Jy sigma=0.000893 wmodel J1624+5652_S_2014_01_04_pus_map.mod ! Writing 93 model components to file: J1624+5652_S_2014_01_04_pus_map.mod wobs J1624+5652_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J1624+5652_S_2014_01_04_pus_uvs.fits wwins J1624+5652_S_2014_01_04_pus_map.win ! wwins: Wrote 1 windows to J1624+5652_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000560769 Jy ! Component: 100 - total flux cleaned = 0.000461219 Jy ! Component: 150 - total flux cleaned = 0.00021681 Jy ! Component: 200 - total flux cleaned = 1.46784e-05 Jy ! Component: 250 - total flux cleaned = -9.41479e-05 Jy ! Component: 300 - total flux cleaned = -0.000146926 Jy ! Component: 350 - total flux cleaned = -0.000324269 Jy ! Component: 400 - total flux cleaned = -0.000348511 Jy ! Component: 450 - total flux cleaned = -0.000419688 Jy ! Component: 500 - total flux cleaned = -0.000419647 Jy ! Component: 550 - total flux cleaned = -0.000420019 Jy ! Component: 600 - total flux cleaned = -0.000420599 Jy ! Component: 650 - total flux cleaned = -0.000399312 Jy ! Component: 700 - total flux cleaned = -0.000317426 Jy ! Component: 750 - total flux cleaned = -0.000317185 Jy ! Component: 800 - total flux cleaned = -0.000239837 Jy ! Component: 850 - total flux cleaned = -0.000221395 Jy ! Component: 900 - total flux cleaned = -0.000202969 Jy ! Component: 950 - total flux cleaned = -0.00022095 Jy ! Component: 1000 - total flux cleaned = -0.000220941 Jy ! Component: 1050 - total flux cleaned = -0.000220908 Jy ! Component: 1100 - total flux cleaned = -0.000220977 Jy ! Component: 1150 - total flux cleaned = -0.000237703 Jy ! Component: 1200 - total flux cleaned = -0.000237308 Jy ! Component: 1250 - total flux cleaned = -0.000237209 Jy ! Component: 1300 - total flux cleaned = -0.000221294 Jy ! Component: 1350 - total flux cleaned = -0.000252478 Jy ! Component: 1400 - total flux cleaned = -0.000221597 Jy ! Component: 1450 - total flux cleaned = -0.000221743 Jy ! Component: 1500 - total flux cleaned = -0.00023671 Jy ! Component: 1550 - total flux cleaned = -0.000236705 Jy ! Component: 1600 - total flux cleaned = -0.00030901 Jy ! Component: 1650 - total flux cleaned = -0.00029462 Jy ! Component: 1700 - total flux cleaned = -0.000322955 Jy ! Component: 1750 - total flux cleaned = -0.000364626 Jy ! Component: 1800 - total flux cleaned = -0.000446786 Jy ! Component: 1850 - total flux cleaned = -0.000460351 Jy ! Component: 1900 - total flux cleaned = -0.000513798 Jy ! Component: 1950 - total flux cleaned = -0.000500406 Jy ! Component: 2000 - total flux cleaned = -0.000526688 Jy ! Component: 2050 - total flux cleaned = -0.000539904 Jy ! Component: 2100 - total flux cleaned = -0.000578675 Jy ! Component: 2150 - total flux cleaned = -0.00065503 Jy ! Component: 2200 - total flux cleaned = -0.00069277 Jy ! Component: 2250 - total flux cleaned = -0.000717777 Jy ! Component: 2300 - total flux cleaned = -0.00080391 Jy ! Component: 2350 - total flux cleaned = -0.000803898 Jy ! Component: 2400 - total flux cleaned = -0.000828217 Jy ! Component: 2450 - total flux cleaned = -0.000876108 Jy ! Component: 2500 - total flux cleaned = -0.000864271 Jy ! Component: 2550 - total flux cleaned = -0.000899668 Jy ! Component: 2600 - total flux cleaned = -0.000934627 Jy ! Component: 2650 - total flux cleaned = -0.000934763 Jy ! Component: 2700 - total flux cleaned = -0.00100348 Jy ! Component: 2750 - total flux cleaned = -0.00102609 Jy ! Component: 2800 - total flux cleaned = -0.00101485 Jy ! Component: 2850 - total flux cleaned = -0.00102614 Jy ! Component: 2900 - total flux cleaned = -0.0010705 Jy ! Component: 2950 - total flux cleaned = -0.00104846 Jy ! Component: 3000 - total flux cleaned = -0.00102671 Jy ! Component: 3050 - total flux cleaned = -0.00100502 Jy ! Component: 3100 - total flux cleaned = -0.000983412 Jy ! Component: 3150 - total flux cleaned = -0.000951299 Jy ! Component: 3200 - total flux cleaned = -0.000930008 Jy ! Component: 3250 - total flux cleaned = -0.00088761 Jy ! Component: 3300 - total flux cleaned = -0.000887598 Jy ! Component: 3350 - total flux cleaned = -0.000866523 Jy ! Component: 3400 - total flux cleaned = -0.000845544 Jy ! Component: 3450 - total flux cleaned = -0.000835124 Jy ! Component: 3500 - total flux cleaned = -0.000845399 Jy ! Component: 3550 - total flux cleaned = -0.000865982 Jy ! Component: 3600 - total flux cleaned = -0.000865977 Jy ! Component: 3650 - total flux cleaned = -0.000886484 Jy ! Component: 3700 - total flux cleaned = -0.000886533 Jy ! Component: 3750 - total flux cleaned = -0.000906893 Jy ! Component: 3800 - total flux cleaned = -0.000917033 Jy ! Component: 3850 - total flux cleaned = -0.000947412 Jy ! Component: 3900 - total flux cleaned = -0.000977658 Jy ! Component: 3950 - total flux cleaned = -0.000987663 Jy ! Component: 4000 - total flux cleaned = -0.00100772 Jy ! Component: 4050 - total flux cleaned = -0.00100774 Jy ! Total flux subtracted in 4096 components = -0.00106758 Jy ! Clean residual min=-0.000564 max=0.000551 Jy/beam ! Clean residual mean=0.000001 rms=0.000173 Jy/beam ! Combined flux in latest and established models = 0.236755 Jy keep ! Adding 224 model components to the UV plane model. ! The established model now contains 317 components and 0.236755 Jy ![Exited script file: muppet] wmap "J1624+5652_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.37 x 11.49 at 53.06 degrees (North through East) ! Clean map min=-0.0018235 max=0.1769 Jy/beam ! Writing clean map to FITS file: J1624+5652_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.176895 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000176481 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.299298 0.299298 0.598596 1.19719 2.39438 4.78876 9.57753 19.1551 38.3101 76.6202 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.176 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.37 x 11.49 at 53.06 degrees (North through East) ! Clean map min=-0.0018235 max=0.1769 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1624+5652_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:31:24 2017