! Started logfile: J1617-1122_S_2014_08_09_pus_uvs.log on Tue Nov 29 23:10:13 2016
obs J1617-1122_S_2014_08_09_pus_uva.fits
! Reading UV FITS file: J1617-1122_S_2014_08_09_pus_uva.fits
! AN table 1: 123 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.688889 visibilities/baseline/integration-bin.
! Found source: J1617-1122
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23588e+09      3.2e+07          1      3.2e+07
!  02        2  2.26788e+09      3.2e+07          1      3.2e+07
!  03        3  2.29988e+09      3.2e+07          1      3.2e+07
!  04        4  2.36388e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 342 lines of history.
! 
! Reading 15252 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@muppet J1617-1122_S_2014_08_09_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 204 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 204 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 204 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 204 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.906893Jy  sigma=0.008830
! Fit after  self-cal, rms=0.873489Jy  sigma=0.008512
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.365 mas, bmaj=9.491 mas, bpa=17.68 degrees
! Estimated noise=1037.94 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0991178 Jy
! Component: 100  -  total flux cleaned = 0.120977 Jy
! Total flux subtracted in 100 components = 0.120977 Jy
! Clean residual min=-0.004515 max=0.007170 Jy/beam
! Clean residual mean=-0.000030 rms=0.001266 Jy/beam
! Combined flux in latest and established models = 0.120977 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.120977 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089351Jy  sigma=0.000795
! Fit after  self-cal, rms=0.089351Jy  sigma=0.000795
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.104 mas, bmaj=10.51 mas, bpa=16.49 degrees
! Estimated noise=599.387 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00866127 Jy
! Component: 100  -  total flux cleaned = 0.0126145 Jy
! Component: 150  -  total flux cleaned = 0.0148512 Jy
! Component: 200  -  total flux cleaned = 0.0162136 Jy
! Total flux subtracted in 200 components = 0.0162136 Jy
! Clean residual min=-0.002849 max=0.002688 Jy/beam
! Clean residual mean=-0.000011 rms=0.000699 Jy/beam
! Combined flux in latest and established models = 0.137191 Jy
! Performing phase self-cal
! Adding 45 model components to the UV plane model.
! The established model now contains 50 components and 0.137191 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088312Jy  sigma=0.000790
! Fit after  self-cal, rms=0.088309Jy  sigma=0.000789
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.90     HN        0.98     KP        1.07     
!   LA        1.16     MK        1.00*    NL        1.06     OV        1.02     
!   PT        1.05     SC        1.01     
! 
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.05     HN        1.05     KP        1.01     
!   LA        1.09     MK        1.00*    NL        0.92     OV        1.02     
!   PT        1.04     SC        1.03     
! 
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.88     FD        1.15     HN        1.06     KP        0.90     
!   LA        0.84     MK        1.00*    NL        0.99     OV        0.95     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.02     HN        0.99     KP        0.85     
!   LA        0.81     MK        1.00*    NL        1.07     OV        0.99     
!   PT        1.03     SC        0.94     
! 
! 
! Fit before self-cal, rms=0.088309Jy  sigma=0.000789
! Fit after  self-cal, rms=0.084846Jy  sigma=0.000776
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.099 mas, bmaj=10.53 mas, bpa=16.6 degrees
! Estimated noise=599.324 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000330672 Jy
! Component: 100  -  total flux cleaned = 0.0004059 Jy
! Component: 150  -  total flux cleaned = 0.00042146 Jy
! Component: 200  -  total flux cleaned = 0.000448796 Jy
! Total flux subtracted in 200 components = 0.000448796 Jy
! Clean residual min=-0.001844 max=0.001637 Jy/beam
! Clean residual mean=-0.000007 rms=0.000451 Jy/beam
! Combined flux in latest and established models = 0.13764 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 66 components and 0.13764 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084836Jy  sigma=0.000776
! Fit after  self-cal, rms=0.084818Jy  sigma=0.000776
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084818Jy  sigma=0.000776
! Fit after  self-cal, rms=0.083589Jy  sigma=0.000773
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.098 mas, bmaj=10.54 mas, bpa=16.48 degrees
! Estimated noise=598.966 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.57269e-05 Jy
! Component: 100  -  total flux cleaned = 1.49092e-05 Jy
! Component: 150  -  total flux cleaned = 3.43555e-05 Jy
! Component: 200  -  total flux cleaned = 6.7417e-05 Jy
! Total flux subtracted in 200 components = 6.7417e-05 Jy
! Clean residual min=-0.001729 max=0.001435 Jy/beam
! Clean residual mean=-0.000003 rms=0.000394 Jy/beam
! Combined flux in latest and established models = 0.137707 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 75 components and 0.137707 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083585Jy  sigma=0.000773
! Fit after  self-cal, rms=0.083577Jy  sigma=0.000773
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.08807e-06 Jy
! Component: 100  -  total flux cleaned = 2.58863e-05 Jy
! Component: 150  -  total flux cleaned = 4.81363e-05 Jy
! Component: 200  -  total flux cleaned = 6.83355e-05 Jy
! Total flux subtracted in 200 components = 6.83355e-05 Jy
! Clean residual min=-0.001729 max=0.001442 Jy/beam
! Clean residual mean=-0.000003 rms=0.000392 Jy/beam
! Combined flux in latest and established models = 0.137776 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 78 components and 0.137776 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083575Jy  sigma=0.000773
! Fit after  self-cal, rms=0.083574Jy  sigma=0.000773
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083574Jy  sigma=0.000773
! Fit after  self-cal, rms=0.083618Jy  sigma=0.000773
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.098 mas, bmaj=10.53 mas, bpa=16.47 degrees
! Estimated noise=599.187 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.43704e-05 Jy
! Component: 100  -  total flux cleaned = 4.68151e-05 Jy
! Component: 150  -  total flux cleaned = 5.27588e-05 Jy
! Component: 200  -  total flux cleaned = 6.40625e-05 Jy
! Total flux subtracted in 200 components = 6.40625e-05 Jy
! Clean residual min=-0.001732 max=0.001440 Jy/beam
! Clean residual mean=-0.000002 rms=0.000390 Jy/beam
! Combined flux in latest and established models = 0.13784 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 80 components and 0.13784 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083616Jy  sigma=0.000773
! Fit after  self-cal, rms=0.083615Jy  sigma=0.000773
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.07182e-05 Jy
! Component: 100  -  total flux cleaned = 2.46742e-05 Jy
! Component: 150  -  total flux cleaned = 2.44777e-05 Jy
! Component: 200  -  total flux cleaned = 2.94599e-05 Jy
! Total flux subtracted in 200 components = 2.94599e-05 Jy
! Clean residual min=-0.001735 max=0.001442 Jy/beam
! Clean residual mean=-0.000002 rms=0.000389 Jy/beam
! Combined flux in latest and established models = 0.137869 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 81 components and 0.137869 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083614Jy  sigma=0.000773
! Fit after  self-cal, rms=0.083614Jy  sigma=0.000773
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083614Jy  sigma=0.000773
! Fit after  self-cal, rms=0.083651Jy  sigma=0.000773
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.735 mas, bmaj=13.9 mas, bpa=6.599 degrees
! Estimated noise=699.982 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000229133 Jy
! Component: 100  -  total flux cleaned = 0.000211913 Jy
! Component: 150  -  total flux cleaned = 0.000184843 Jy
! Component: 200  -  total flux cleaned = 0.000176284 Jy
! Total flux subtracted in 200 components = 0.000176284 Jy
! Clean residual min=-0.001962 max=0.001581 Jy/beam
! Clean residual mean=-0.000004 rms=0.000450 Jy/beam
! Combined flux in latest and established models = 0.138045 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 89 components and 0.138045 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083651Jy  sigma=0.000773
! Fit after  self-cal, rms=0.083650Jy  sigma=0.000773
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.15246e-06 Jy
! Component: 100  -  total flux cleaned = -5.08956e-06 Jy
! Component: 150  -  total flux cleaned = -1.61344e-05 Jy
! Component: 200  -  total flux cleaned = -1.82851e-05 Jy
! Total flux subtracted in 200 components = -1.82851e-05 Jy
! Clean residual min=-0.001965 max=0.001586 Jy/beam
! Clean residual mean=-0.000004 rms=0.000450 Jy/beam
! Combined flux in latest and established models = 0.138027 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 89 components and 0.138027 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083650Jy  sigma=0.000773
! Fit after  self-cal, rms=0.083649Jy  sigma=0.000773
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.098 mas, bmaj=10.54 mas, bpa=16.47 degrees
! Estimated noise=599.365 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.098 x 10.54 at 16.47 degrees (North through East)
! Clean map  min=-0.0017414  max=0.12732 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.356 mas, bmaj=9.537 mas, bpa=17.58 degrees
! Estimated noise=1035.1 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.098724 Jy
! Component: 100  -  total flux cleaned = 0.120675 Jy
! Component: 150  -  total flux cleaned = 0.128647 Jy
! Component: 200  -  total flux cleaned = 0.132724 Jy
! Total flux subtracted in 200 components = 0.132724 Jy
! Clean residual min=-0.002606 max=0.002627 Jy/beam
! Clean residual mean=-0.000006 rms=0.000706 Jy/beam
! Combined flux in latest and established models = 0.132724 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 24 model components to the UV plane model.
! The established model now contains 24 components and 0.132724 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.098 mas, bmaj=10.54 mas, bpa=16.47 degrees
! Estimated noise=599.365 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00234713 Jy
! Component: 100  -  total flux cleaned = 0.00356786 Jy
! Component: 150  -  total flux cleaned = 0.00427889 Jy
! Component: 200  -  total flux cleaned = 0.00465537 Jy
! Total flux subtracted in 200 components = 0.00465537 Jy
! Clean residual min=-0.001849 max=0.001420 Jy/beam
! Clean residual mean=-0.000003 rms=0.000391 Jy/beam
! Combined flux in latest and established models = 0.13738 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 47 components and 0.13738 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.735 mas, bmaj=13.9 mas, bpa=6.599 degrees
! Estimated noise=699.982 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000406295 Jy
! Component: 100  -  total flux cleaned = 0.00048202 Jy
! Component: 150  -  total flux cleaned = 0.00049475 Jy
! Component: 200  -  total flux cleaned = 0.000505933 Jy
! Total flux subtracted in 200 components = 0.000505933 Jy
! Clean residual min=-0.002011 max=0.001575 Jy/beam
! Clean residual mean=-0.000005 rms=0.000450 Jy/beam
! Combined flux in latest and established models = 0.137886 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.00172e-06 Jy
! Component: 100  -  total flux cleaned = 1.37036e-05 Jy
! Component: 150  -  total flux cleaned = 2.01708e-05 Jy
! Component: 200  -  total flux cleaned = 2.31422e-05 Jy
! Total flux subtracted in 200 components = 2.31422e-05 Jy
! Clean residual min=-0.002005 max=0.001578 Jy/beam
! Clean residual mean=-0.000004 rms=0.000450 Jy/beam
! Combined flux in latest and established models = 0.137909 Jy
! Adding 18 model components to the UV plane model.
! The established model now contains 62 components and 0.137909 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.098 mas, bmaj=10.54 mas, bpa=16.47 degrees
! Estimated noise=599.365 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.43379e-05 Jy
! Component: 100  -  total flux cleaned = -4.40116e-05 Jy
! Component: 150  -  total flux cleaned = -3.47264e-05 Jy
! Component: 200  -  total flux cleaned = -3.488e-05 Jy
! Total flux subtracted in 200 components = -3.488e-05 Jy
! Clean residual min=-0.001818 max=0.001465 Jy/beam
! Clean residual mean=-0.000002 rms=0.000388 Jy/beam
! Combined flux in latest and established models = 0.137874 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 71 components and 0.137874 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083651Jy  sigma=0.000773
! Fit after  self-cal, rms=0.083650Jy  sigma=0.000773
wmodel J1617-1122_S_2014_08_09_pus_map.mod
! Writing 71 model components to file: J1617-1122_S_2014_08_09_pus_map.mod
wobs J1617-1122_S_2014_08_09_pus_uvs.fits
! Writing UV FITS file: J1617-1122_S_2014_08_09_pus_uvs.fits
wwins J1617-1122_S_2014_08_09_pus_map.win
! wwins: Wrote 1 windows to J1617-1122_S_2014_08_09_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000559182 Jy
! Component: 100  -  total flux cleaned = -0.000691954 Jy
! Component: 150  -  total flux cleaned = -0.00069183 Jy
! Component: 200  -  total flux cleaned = -0.00066963 Jy
! Component: 250  -  total flux cleaned = -0.000756543 Jy
! Component: 300  -  total flux cleaned = -0.000859846 Jy
! Component: 350  -  total flux cleaned = -0.000900069 Jy
! Component: 400  -  total flux cleaned = -0.000978651 Jy
! Component: 450  -  total flux cleaned = -0.001054 Jy
! Component: 500  -  total flux cleaned = -0.00105333 Jy
! Component: 550  -  total flux cleaned = -0.00105305 Jy
! Component: 600  -  total flux cleaned = -0.0010885 Jy
! Component: 650  -  total flux cleaned = -0.00112307 Jy
! Component: 700  -  total flux cleaned = -0.00117318 Jy
! Component: 750  -  total flux cleaned = -0.00117303 Jy
! Component: 800  -  total flux cleaned = -0.001205 Jy
! Component: 850  -  total flux cleaned = -0.00114249 Jy
! Component: 900  -  total flux cleaned = -0.00118885 Jy
! Component: 950  -  total flux cleaned = -0.00115837 Jy
! Component: 1000  -  total flux cleaned = -0.00115863 Jy
! Component: 1050  -  total flux cleaned = -0.00117339 Jy
! Component: 1100  -  total flux cleaned = -0.0011448 Jy
! Component: 1150  -  total flux cleaned = -0.00110266 Jy
! Component: 1200  -  total flux cleaned = -0.00107514 Jy
! Component: 1250  -  total flux cleaned = -0.0011027 Jy
! Component: 1300  -  total flux cleaned = -0.00106225 Jy
! Component: 1350  -  total flux cleaned = -0.00102241 Jy
! Component: 1400  -  total flux cleaned = -0.000956966 Jy
! Component: 1450  -  total flux cleaned = -0.000969751 Jy
! Component: 1500  -  total flux cleaned = -0.000918998 Jy
! Component: 1550  -  total flux cleaned = -0.000956557 Jy
! Component: 1600  -  total flux cleaned = -0.000906986 Jy
! Component: 1650  -  total flux cleaned = -0.000882254 Jy
! Component: 1700  -  total flux cleaned = -0.000846038 Jy
! Component: 1750  -  total flux cleaned = -0.000857762 Jy
! Component: 1800  -  total flux cleaned = -0.00079891 Jy
! Component: 1850  -  total flux cleaned = -0.000775807 Jy
! Component: 1900  -  total flux cleaned = -0.000787404 Jy
! Component: 1950  -  total flux cleaned = -0.000764642 Jy
! Component: 2000  -  total flux cleaned = -0.000775826 Jy
! Component: 2050  -  total flux cleaned = -0.000753443 Jy
! Component: 2100  -  total flux cleaned = -0.000742495 Jy
! Component: 2150  -  total flux cleaned = -0.0006992 Jy
! Component: 2200  -  total flux cleaned = -0.000656389 Jy
! Component: 2250  -  total flux cleaned = -0.00060336 Jy
! Component: 2300  -  total flux cleaned = -0.000582399 Jy
! Component: 2350  -  total flux cleaned = -0.000572123 Jy
! Component: 2400  -  total flux cleaned = -0.000500047 Jy
! Component: 2450  -  total flux cleaned = -0.000459482 Jy
! Component: 2500  -  total flux cleaned = -0.000419264 Jy
! Component: 2550  -  total flux cleaned = -0.000349603 Jy
! Component: 2600  -  total flux cleaned = -0.000310261 Jy
! Component: 2650  -  total flux cleaned = -0.000242003 Jy
! Component: 2700  -  total flux cleaned = -0.0002131 Jy
! Component: 2750  -  total flux cleaned = -0.000155652 Jy
! Component: 2800  -  total flux cleaned = -0.000165255 Jy
! Component: 2850  -  total flux cleaned = -0.000127625 Jy
! Component: 2900  -  total flux cleaned = -9.03241e-05 Jy
! Component: 2950  -  total flux cleaned = -8.10568e-05 Jy
! Component: 3000  -  total flux cleaned = -4.44282e-05 Jy
! Component: 3050  -  total flux cleaned = -1.71922e-05 Jy
! Component: 3100  -  total flux cleaned = -2.61565e-05 Jy
! Component: 3150  -  total flux cleaned = -8.27437e-06 Jy
! Component: 3200  -  total flux cleaned = 9.50776e-06 Jy
! Component: 3250  -  total flux cleaned = 1.82992e-05 Jy
! Component: 3300  -  total flux cleaned = 5.32126e-05 Jy
! Component: 3350  -  total flux cleaned = 4.45514e-05 Jy
! Component: 3400  -  total flux cleaned = 4.47157e-05 Jy
! Component: 3450  -  total flux cleaned = 9.60054e-05 Jy
! Component: 3500  -  total flux cleaned = 0.000138394 Jy
! Component: 3550  -  total flux cleaned = 0.000146654 Jy
! Component: 3600  -  total flux cleaned = 0.000163393 Jy
! Component: 3650  -  total flux cleaned = 0.000171753 Jy
! Component: 3700  -  total flux cleaned = 0.000204829 Jy
! Component: 3750  -  total flux cleaned = 0.000212995 Jy
! Component: 3800  -  total flux cleaned = 0.000237435 Jy
! Component: 3850  -  total flux cleaned = 0.000245552 Jy
! Component: 3900  -  total flux cleaned = 0.000277798 Jy
! Component: 3950  -  total flux cleaned = 0.00028587 Jy
! Component: 4000  -  total flux cleaned = 0.000333637 Jy
! Component: 4050  -  total flux cleaned = 0.000373135 Jy
! Total flux subtracted in 4096 components = 0.000396718 Jy
! Clean residual min=-0.000513 max=0.000496 Jy/beam
! Clean residual mean=-0.000000 rms=0.000150 Jy/beam
! Combined flux in latest and established models = 0.138271 Jy
keep
! Adding 296 model components to the UV plane model.
! The established model now contains 367 components and 0.138271 Jy
![Exited script file: muppet]
wmap "J1617-1122_S_2014_08_09_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.098 x 10.54 at 16.47 degrees (North through East)
! Clean map  min=-0.0010266  max=0.12724 Jy/beam
! Writing clean map to FITS file: J1617-1122_S_2014_08_09_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.127243 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000147323 
device "J1617-1122_S_2014_08_09_pus\_map.eps/VPS"
! Attempting to open device: 'J1617-1122_S_2014_08_09_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.347341 0.347341 0.694682 1.38936 2.77873 5.55746 11.1149 22.2298 44.4597 88.9193
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0004 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.127 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.098 x 10.54 at 16.47 degrees (North through East)
! Clean map  min=-0.0010266  max=0.12724 Jy/beam
quit
! Quitting program
! Log file J1617-1122_S_2014_08_09_pus_uvs.log closed on Tue Nov 29 23:10:17 2016