! Started logfile: J1613-2750_S_2014_08_09_pus_uvs.log on Tue Nov 29 23:10:02 2016 obs J1613-2750_S_2014_08_09_pus_uva.fits ! Reading UV FITS file: J1613-2750_S_2014_08_09_pus_uva.fits ! AN table 1: 123 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.773622 visibilities/baseline/integration-bin. ! Found source: J1613-2750 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 342 lines of history. ! ! Reading 17128 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1613-2750_S_2014_08_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 149 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 209 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 149 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 149 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.988054Jy sigma=0.008351 ! Fit after self-cal, rms=0.941590Jy sigma=0.007981 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.102 mas, bmaj=12.59 mas, bpa=11.81 degrees ! Estimated noise=1023.33 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0452405 Jy ! Component: 100 - total flux cleaned = 0.0574451 Jy ! Total flux subtracted in 100 components = 0.0574451 Jy ! Clean residual min=-0.003737 max=0.004960 Jy/beam ! Clean residual mean=0.000030 rms=0.001055 Jy/beam ! Combined flux in latest and established models = 0.0574451 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.0574451 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096122Jy sigma=0.000765 ! Fit after self-cal, rms=0.095589Jy sigma=0.000761 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.006 mas, bmaj=14.23 mas, bpa=9.899 degrees ! Estimated noise=656.366 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00901258 Jy ! Component: 100 - total flux cleaned = 0.0131176 Jy ! Component: 150 - total flux cleaned = 0.0153038 Jy ! Component: 200 - total flux cleaned = 0.016577 Jy ! Total flux subtracted in 200 components = 0.016577 Jy ! Clean residual min=-0.002298 max=0.002224 Jy/beam ! Clean residual mean=0.000017 rms=0.000619 Jy/beam ! Combined flux in latest and established models = 0.0740221 Jy ! Performing phase self-cal ! Adding 61 model components to the UV plane model. ! The established model now contains 74 components and 0.0740221 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094794Jy sigma=0.000754 ! Fit after self-cal, rms=0.094765Jy sigma=0.000753 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.84 HN 0.97 KP 1.07 ! LA 1.10 MK 1.00* NL 1.01 OV 1.03 ! PT 1.01 SC 1.08 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.97 HN 1.02 KP 0.98 ! LA 1.07 MK 1.00* NL 1.08 OV 0.99 ! PT 1.03 SC 1.02 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.07 HN 1.11 KP 0.93 ! LA 0.81 MK 1.00* NL 0.98 OV 0.94 ! PT 0.94 SC 1.15 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00 HN 1.00 KP 0.88 ! LA 0.84 MK 1.00* NL 1.10 OV 1.05 ! PT 1.06 SC 0.91 ! ! ! Fit before self-cal, rms=0.094765Jy sigma=0.000753 ! Fit after self-cal, rms=0.093364Jy sigma=0.000751 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.041 mas, bmaj=14.39 mas, bpa=9.83 degrees ! Estimated noise=654.241 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000401459 Jy ! Component: 100 - total flux cleaned = 0.000475888 Jy ! Component: 150 - total flux cleaned = 0.000491744 Jy ! Component: 200 - total flux cleaned = 0.000491381 Jy ! Total flux subtracted in 200 components = 0.000491381 Jy ! Clean residual min=-0.002312 max=0.002083 Jy/beam ! Clean residual mean=0.000008 rms=0.000577 Jy/beam ! Combined flux in latest and established models = 0.0745135 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 83 components and 0.0745135 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093357Jy sigma=0.000751 ! Fit after self-cal, rms=0.093350Jy sigma=0.000751 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093350Jy sigma=0.000751 ! Fit after self-cal, rms=0.093914Jy sigma=0.000750 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.049 mas, bmaj=14.41 mas, bpa=9.765 degrees ! Estimated noise=657.154 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000325761 Jy ! Component: 100 - total flux cleaned = 0.000377066 Jy ! Component: 150 - total flux cleaned = 0.000391869 Jy ! Component: 200 - total flux cleaned = 0.000391679 Jy ! Total flux subtracted in 200 components = 0.000391679 Jy ! Clean residual min=-0.002336 max=0.002194 Jy/beam ! Clean residual mean=0.000006 rms=0.000572 Jy/beam ! Combined flux in latest and established models = 0.0749051 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 87 components and 0.0749051 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093908Jy sigma=0.000750 ! Fit after self-cal, rms=0.093906Jy sigma=0.000750 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000102112 Jy ! Component: 100 - total flux cleaned = 0.000118405 Jy ! Component: 150 - total flux cleaned = 0.000118803 Jy ! Component: 200 - total flux cleaned = 0.000118853 Jy ! Total flux subtracted in 200 components = 0.000118853 Jy ! Clean residual min=-0.002306 max=0.002186 Jy/beam ! Clean residual mean=0.000006 rms=0.000571 Jy/beam ! Combined flux in latest and established models = 0.075024 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 89 components and 0.075024 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093901Jy sigma=0.000750 ! Fit after self-cal, rms=0.093895Jy sigma=0.000750 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093895Jy sigma=0.000750 ! Fit after self-cal, rms=0.094676Jy sigma=0.000750 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.048 mas, bmaj=14.39 mas, bpa=9.746 degrees ! Estimated noise=660.265 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000406776 Jy ! Component: 100 - total flux cleaned = 0.000482622 Jy ! Component: 150 - total flux cleaned = 0.000523368 Jy ! Component: 200 - total flux cleaned = 0.000522725 Jy ! Total flux subtracted in 200 components = 0.000522725 Jy ! Clean residual min=-0.002336 max=0.002157 Jy/beam ! Clean residual mean=0.000005 rms=0.000558 Jy/beam ! Combined flux in latest and established models = 0.0755467 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 92 components and 0.0755467 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094671Jy sigma=0.000750 ! Fit after self-cal, rms=0.094701Jy sigma=0.000750 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.11496e-05 Jy ! Component: 100 - total flux cleaned = 3.12545e-05 Jy ! Component: 150 - total flux cleaned = 3.11802e-05 Jy ! Component: 200 - total flux cleaned = 1.91864e-05 Jy ! Total flux subtracted in 200 components = 1.91864e-05 Jy ! Clean residual min=-0.002289 max=0.002144 Jy/beam ! Clean residual mean=0.000005 rms=0.000558 Jy/beam ! Combined flux in latest and established models = 0.0755659 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 96 components and 0.0755659 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094697Jy sigma=0.000750 ! Fit after self-cal, rms=0.094694Jy sigma=0.000750 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094694Jy sigma=0.000750 ! Fit after self-cal, rms=0.095048Jy sigma=0.000750 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.27 mas, bmaj=21.72 mas, bpa=-0.5468 degrees ! Estimated noise=751.268 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000179273 Jy ! Component: 100 - total flux cleaned = 0.000187104 Jy ! Component: 150 - total flux cleaned = 0.000181255 Jy ! Component: 200 - total flux cleaned = 0.000176182 Jy ! Total flux subtracted in 200 components = 0.000176182 Jy ! Clean residual min=-0.002360 max=0.002253 Jy/beam ! Clean residual mean=0.000006 rms=0.000683 Jy/beam ! Combined flux in latest and established models = 0.0757421 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 109 components and 0.0757421 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095047Jy sigma=0.000750 ! Fit after self-cal, rms=0.095049Jy sigma=0.000750 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.40355e-05 Jy ! Component: 100 - total flux cleaned = -9.04221e-05 Jy ! Component: 150 - total flux cleaned = -9.57329e-05 Jy ! Component: 200 - total flux cleaned = -0.000100166 Jy ! Total flux subtracted in 200 components = -0.000100166 Jy ! Clean residual min=-0.002341 max=0.002272 Jy/beam ! Clean residual mean=0.000006 rms=0.000684 Jy/beam ! Combined flux in latest and established models = 0.0756419 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 114 components and 0.0756419 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095049Jy sigma=0.000750 ! Fit after self-cal, rms=0.095046Jy sigma=0.000750 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.04 mas, bmaj=14.36 mas, bpa=9.789 degrees ! Estimated noise=662.104 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.04 x 14.36 at 9.789 degrees (North through East) ! Clean map min=-0.00227 max=0.06254 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.108 mas, bmaj=12.67 mas, bpa=11.73 degrees ! Estimated noise=1042.07 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0458318 Jy ! Component: 100 - total flux cleaned = 0.0591848 Jy ! Component: 150 - total flux cleaned = 0.0657743 Jy ! Component: 200 - total flux cleaned = 0.0698573 Jy ! Total flux subtracted in 200 components = 0.0698573 Jy ! Clean residual min=-0.002795 max=0.003057 Jy/beam ! Clean residual mean=0.000007 rms=0.000753 Jy/beam ! Combined flux in latest and established models = 0.0698572 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 0.0698572 Jy ! Inverting map and beam ! Estimated beam: bmin=4.04 mas, bmaj=14.36 mas, bpa=9.789 degrees ! Estimated noise=662.104 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00319457 Jy ! Component: 100 - total flux cleaned = 0.00473413 Jy ! Component: 150 - total flux cleaned = 0.00548289 Jy ! Component: 200 - total flux cleaned = 0.0056047 Jy ! Total flux subtracted in 200 components = 0.0056047 Jy ! Clean residual min=-0.002307 max=0.002173 Jy/beam ! Clean residual mean=0.000005 rms=0.000562 Jy/beam ! Combined flux in latest and established models = 0.075462 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 42 components and 0.075462 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.27 mas, bmaj=21.72 mas, bpa=-0.5468 degrees ! Estimated noise=751.268 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000260868 Jy ! Component: 100 - total flux cleaned = 0.000240643 Jy ! Component: 150 - total flux cleaned = 0.000223778 Jy ! Component: 200 - total flux cleaned = 0.000209403 Jy ! Total flux subtracted in 200 components = 0.000209403 Jy ! Clean residual min=-0.002361 max=0.002265 Jy/beam ! Clean residual mean=0.000006 rms=0.000684 Jy/beam ! Combined flux in latest and established models = 0.0756714 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.94679e-05 Jy ! Component: 100 - total flux cleaned = -3.12777e-05 Jy ! Component: 150 - total flux cleaned = -4.24355e-05 Jy ! Component: 200 - total flux cleaned = -5.74923e-05 Jy ! Total flux subtracted in 200 components = -5.74923e-05 Jy ! Clean residual min=-0.002332 max=0.002264 Jy/beam ! Clean residual mean=0.000006 rms=0.000684 Jy/beam ! Combined flux in latest and established models = 0.0756139 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 57 components and 0.0756139 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.04 mas, bmaj=14.36 mas, bpa=9.789 degrees ! Estimated noise=662.104 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000113835 Jy ! Component: 100 - total flux cleaned = 0.000148535 Jy ! Component: 150 - total flux cleaned = 0.00019393 Jy ! Component: 200 - total flux cleaned = 0.000232786 Jy ! Total flux subtracted in 200 components = 0.000232786 Jy ! Clean residual min=-0.002290 max=0.002157 Jy/beam ! Clean residual mean=0.000005 rms=0.000558 Jy/beam ! Combined flux in latest and established models = 0.0758466 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 64 components and 0.0758467 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095046Jy sigma=0.000750 ! Fit after self-cal, rms=0.095036Jy sigma=0.000749 wmodel J1613-2750_S_2014_08_09_pus_map.mod ! Writing 64 model components to file: J1613-2750_S_2014_08_09_pus_map.mod wobs J1613-2750_S_2014_08_09_pus_uvs.fits ! Writing UV FITS file: J1613-2750_S_2014_08_09_pus_uvs.fits wwins J1613-2750_S_2014_08_09_pus_map.win ! wwins: Wrote 1 windows to J1613-2750_S_2014_08_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000499689 Jy ! Component: 100 - total flux cleaned = -0.000802876 Jy ! Component: 150 - total flux cleaned = -0.000837261 Jy ! Component: 200 - total flux cleaned = -0.00103639 Jy ! Component: 250 - total flux cleaned = -0.00119401 Jy ! Component: 300 - total flux cleaned = -0.00134582 Jy ! Component: 350 - total flux cleaned = -0.00155127 Jy ! Component: 400 - total flux cleaned = -0.0017213 Jy ! Component: 450 - total flux cleaned = -0.00185869 Jy ! Component: 500 - total flux cleaned = -0.00204524 Jy ! Component: 550 - total flux cleaned = -0.00220002 Jy ! Component: 600 - total flux cleaned = -0.00230059 Jy ! Component: 650 - total flux cleaned = -0.00242378 Jy ! Component: 700 - total flux cleaned = -0.00254406 Jy ! Component: 750 - total flux cleaned = -0.00263792 Jy ! Component: 800 - total flux cleaned = -0.00272993 Jy ! Component: 850 - total flux cleaned = -0.00275242 Jy ! Component: 900 - total flux cleaned = -0.00292894 Jy ! Component: 950 - total flux cleaned = -0.00299344 Jy ! Component: 1000 - total flux cleaned = -0.00303605 Jy ! Component: 1050 - total flux cleaned = -0.00316194 Jy ! Component: 1100 - total flux cleaned = -0.00328607 Jy ! Component: 1150 - total flux cleaned = -0.00336728 Jy ! Component: 1200 - total flux cleaned = -0.00346693 Jy ! Component: 1250 - total flux cleaned = -0.00358504 Jy ! Component: 1300 - total flux cleaned = -0.00368226 Jy ! Component: 1350 - total flux cleaned = -0.00373991 Jy ! Component: 1400 - total flux cleaned = -0.00381562 Jy ! Component: 1450 - total flux cleaned = -0.00385312 Jy ! Component: 1500 - total flux cleaned = -0.00392706 Jy ! Component: 1550 - total flux cleaned = -0.00403561 Jy ! Component: 1600 - total flux cleaned = -0.0040178 Jy ! Component: 1650 - total flux cleaned = -0.00403578 Jy ! Component: 1700 - total flux cleaned = -0.00412303 Jy ! Component: 1750 - total flux cleaned = -0.00422608 Jy ! Component: 1800 - total flux cleaned = -0.00417482 Jy ! Component: 1850 - total flux cleaned = -0.00420884 Jy ! Component: 1900 - total flux cleaned = -0.00425889 Jy ! Component: 1950 - total flux cleaned = -0.00429213 Jy ! Component: 2000 - total flux cleaned = -0.00438994 Jy ! Component: 2050 - total flux cleaned = -0.00440601 Jy ! Component: 2100 - total flux cleaned = -0.00442213 Jy ! Component: 2150 - total flux cleaned = -0.00443819 Jy ! Component: 2200 - total flux cleaned = -0.0044849 Jy ! Component: 2250 - total flux cleaned = -0.004531 Jy ! Component: 2300 - total flux cleaned = -0.00456165 Jy ! Component: 2350 - total flux cleaned = -0.00462179 Jy ! Component: 2400 - total flux cleaned = -0.00469621 Jy ! Component: 2450 - total flux cleaned = -0.0046812 Jy ! Component: 2500 - total flux cleaned = -0.00469583 Jy ! Component: 2550 - total flux cleaned = -0.00471028 Jy ! Component: 2600 - total flux cleaned = -0.00479654 Jy ! Component: 2650 - total flux cleaned = -0.00485331 Jy ! Component: 2700 - total flux cleaned = -0.00492388 Jy ! Component: 2750 - total flux cleaned = -0.00492379 Jy ! Component: 2800 - total flux cleaned = -0.00495172 Jy ! Component: 2850 - total flux cleaned = -0.00503416 Jy ! Component: 2900 - total flux cleaned = -0.00512919 Jy ! Component: 2950 - total flux cleaned = -0.00511566 Jy ! Component: 3000 - total flux cleaned = -0.00515575 Jy ! Component: 3050 - total flux cleaned = -0.00523547 Jy ! Component: 3100 - total flux cleaned = -0.00524871 Jy ! Component: 3150 - total flux cleaned = -0.00528808 Jy ! Component: 3200 - total flux cleaned = -0.00534008 Jy ! Component: 3250 - total flux cleaned = -0.00543006 Jy ! Component: 3300 - total flux cleaned = -0.00545559 Jy ! Component: 3350 - total flux cleaned = -0.00546832 Jy ! Component: 3400 - total flux cleaned = -0.00554389 Jy ! Component: 3450 - total flux cleaned = -0.00563141 Jy ! Component: 3500 - total flux cleaned = -0.00568105 Jy ! Component: 3550 - total flux cleaned = -0.00574275 Jy ! Component: 3600 - total flux cleaned = -0.00585294 Jy ! Component: 3650 - total flux cleaned = -0.00592586 Jy ! Component: 3700 - total flux cleaned = -0.0059499 Jy ! Component: 3750 - total flux cleaned = -0.00603397 Jy ! Component: 3800 - total flux cleaned = -0.00609351 Jy ! Component: 3850 - total flux cleaned = -0.00615266 Jy ! Component: 3900 - total flux cleaned = -0.00623505 Jy ! Component: 3950 - total flux cleaned = -0.00629354 Jy ! Component: 4000 - total flux cleaned = -0.00640965 Jy ! Component: 4050 - total flux cleaned = -0.00645577 Jy ! Total flux subtracted in 4096 components = -0.00650169 Jy ! Clean residual min=-0.000663 max=0.000705 Jy/beam ! Clean residual mean=0.000000 rms=0.000223 Jy/beam ! Combined flux in latest and established models = 0.069345 Jy keep ! Adding 289 model components to the UV plane model. ! The established model now contains 353 components and 0.069345 Jy ![Exited script file: muppet] wmap "J1613-2750_S_2014_08_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.04 x 14.36 at 9.789 degrees (North through East) ! Clean map min=-0.0018734 max=0.062281 Jy/beam ! Writing clean map to FITS file: J1613-2750_S_2014_08_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0622813 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00022172 device "J1613-2750_S_2014_08_09_pus\_map.eps/VPS" ! Attempting to open device: 'J1613-2750_S_2014_08_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.06799 1.06799 2.13599 4.27197 8.54395 17.0879 34.1758 68.3516 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.062 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.04 x 14.36 at 9.789 degrees (North through East) ! Clean map min=-0.0018734 max=0.062281 Jy/beam quit ! Quitting program ! Log file J1613-2750_S_2014_08_09_pus_uvs.log closed on Tue Nov 29 23:10:07 2016