! Started logfile: J1611+1856_S_2015_01_22_pus_uvs.log on Tue Jan 3 22:58:50 2017 obs J1611+1856_S_2015_01_22_pus_uva.fits ! Reading UV FITS file: J1611+1856_S_2015_01_22_pus_uva.fits ! AN table 1: 30 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.8 visibilities/baseline/integration-bin. ! Found source: J1611+1856 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 281 lines of history. ! ! Reading 4320 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1611+1856_S_2015_01_22_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.912510Jy sigma=0.011506 ! Fit after self-cal, rms=0.905033Jy sigma=0.011409 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.544 mas, bmaj=6.944 mas, bpa=5.819 degrees ! Estimated noise=1027.06 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0726992 Jy ! Component: 100 - total flux cleaned = 0.0902943 Jy ! Total flux subtracted in 100 components = 0.0902943 Jy ! Clean residual min=-0.005545 max=0.007890 Jy/beam ! Clean residual mean=0.000007 rms=0.001599 Jy/beam ! Combined flux in latest and established models = 0.0902943 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.0902943 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068760Jy sigma=0.000809 ! Fit after self-cal, rms=0.068740Jy sigma=0.000809 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.983 mas, bmaj=7.447 mas, bpa=5.554 degrees ! Estimated noise=865.662 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0124094 Jy ! Component: 100 - total flux cleaned = 0.0197188 Jy ! Component: 150 - total flux cleaned = 0.0244661 Jy ! Component: 200 - total flux cleaned = 0.0277704 Jy ! Total flux subtracted in 200 components = 0.0277704 Jy ! Clean residual min=-0.003643 max=0.004141 Jy/beam ! Clean residual mean=0.000008 rms=0.001016 Jy/beam ! Combined flux in latest and established models = 0.118065 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 38 components and 0.118065 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066150Jy sigma=0.000778 ! Fit after self-cal, rms=0.066135Jy sigma=0.000777 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.00* HN 0.98 KP 1.13 ! LA 1.05 MK 1.02 NL 0.98 OV 0.98 ! PT 0.99 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.00* HN 0.96 KP 1.03 ! LA 0.99 MK 1.09 NL 1.03 OV 0.96 ! PT 1.01 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* HN 0.96 KP 0.81 ! LA 0.80 MK 1.14 NL 1.07 OV 0.95 ! PT 1.00 SC 1.06 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.00* HN 0.97 KP 0.81 ! LA 0.90 MK 1.14 NL 0.97 OV 0.99 ! PT 1.02 SC 0.95 ! ! ! Fit before self-cal, rms=0.066135Jy sigma=0.000777 ! Fit after self-cal, rms=0.064335Jy sigma=0.000764 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.023 mas, bmaj=7.556 mas, bpa=5.736 degrees ! Estimated noise=865.896 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000464188 Jy ! Component: 100 - total flux cleaned = 0.000684153 Jy ! Component: 150 - total flux cleaned = 0.000878662 Jy ! Component: 200 - total flux cleaned = 0.00100381 Jy ! Total flux subtracted in 200 components = 0.00100381 Jy ! Clean residual min=-0.002708 max=0.003045 Jy/beam ! Clean residual mean=0.000004 rms=0.000712 Jy/beam ! Combined flux in latest and established models = 0.119069 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 43 components and 0.119069 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064311Jy sigma=0.000763 ! Fit after self-cal, rms=0.064337Jy sigma=0.000763 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064337Jy sigma=0.000763 ! Fit after self-cal, rms=0.064292Jy sigma=0.000763 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.019 mas, bmaj=7.551 mas, bpa=5.695 degrees ! Estimated noise=865.475 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000308173 Jy ! Component: 100 - total flux cleaned = 0.00048709 Jy ! Component: 150 - total flux cleaned = 0.000646204 Jy ! Component: 200 - total flux cleaned = 0.00073004 Jy ! Total flux subtracted in 200 components = 0.00073004 Jy ! Clean residual min=-0.002704 max=0.002991 Jy/beam ! Clean residual mean=0.000004 rms=0.000700 Jy/beam ! Combined flux in latest and established models = 0.119799 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 47 components and 0.119799 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064276Jy sigma=0.000763 ! Fit after self-cal, rms=0.064276Jy sigma=0.000763 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.38111e-05 Jy ! Component: 100 - total flux cleaned = 0.00016793 Jy ! Component: 150 - total flux cleaned = 0.000202949 Jy ! Component: 200 - total flux cleaned = 0.000249823 Jy ! Total flux subtracted in 200 components = 0.000249823 Jy ! Clean residual min=-0.002718 max=0.002962 Jy/beam ! Clean residual mean=0.000004 rms=0.000693 Jy/beam ! Combined flux in latest and established models = 0.120048 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 47 components and 0.120048 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064267Jy sigma=0.000763 ! Fit after self-cal, rms=0.064266Jy sigma=0.000763 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064266Jy sigma=0.000763 ! Fit after self-cal, rms=0.064139Jy sigma=0.000763 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.014 mas, bmaj=7.544 mas, bpa=5.618 degrees ! Estimated noise=864.304 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000232441 Jy ! Component: 100 - total flux cleaned = 0.000377157 Jy ! Component: 150 - total flux cleaned = 0.000458194 Jy ! Component: 200 - total flux cleaned = 0.00051698 Jy ! Total flux subtracted in 200 components = 0.00051698 Jy ! Clean residual min=-0.002704 max=0.002918 Jy/beam ! Clean residual mean=0.000004 rms=0.000684 Jy/beam ! Combined flux in latest and established models = 0.120565 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 50 components and 0.120565 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064130Jy sigma=0.000763 ! Fit after self-cal, rms=0.064129Jy sigma=0.000763 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.33434e-07 Jy ! Component: 100 - total flux cleaned = 2.73085e-05 Jy ! Component: 150 - total flux cleaned = 6.54696e-05 Jy ! Component: 200 - total flux cleaned = 0.000100615 Jy ! Total flux subtracted in 200 components = 0.000100615 Jy ! Clean residual min=-0.002699 max=0.002900 Jy/beam ! Clean residual mean=0.000004 rms=0.000679 Jy/beam ! Combined flux in latest and established models = 0.120666 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 53 components and 0.120666 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064125Jy sigma=0.000763 ! Fit after self-cal, rms=0.064123Jy sigma=0.000763 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064123Jy sigma=0.000763 ! Fit after self-cal, rms=0.064039Jy sigma=0.000762 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.537 mas, bmaj=10.64 mas, bpa=-3.973 degrees ! Estimated noise=1134.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000588364 Jy ! Component: 100 - total flux cleaned = 0.000588589 Jy ! Component: 150 - total flux cleaned = 0.000571207 Jy ! Component: 200 - total flux cleaned = 0.000569787 Jy ! Total flux subtracted in 200 components = 0.000569787 Jy ! Clean residual min=-0.002959 max=0.004017 Jy/beam ! Clean residual mean=0.000007 rms=0.000943 Jy/beam ! Combined flux in latest and established models = 0.121236 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 55 components and 0.121236 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064055Jy sigma=0.000763 ! Fit after self-cal, rms=0.064027Jy sigma=0.000762 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.68667e-06 Jy ! Component: 100 - total flux cleaned = -4.15467e-05 Jy ! Component: 150 - total flux cleaned = -9.5816e-05 Jy ! Component: 200 - total flux cleaned = -0.000111303 Jy ! Total flux subtracted in 200 components = -0.000111303 Jy ! Clean residual min=-0.002937 max=0.003933 Jy/beam ! Clean residual mean=0.000007 rms=0.000913 Jy/beam ! Combined flux in latest and established models = 0.121124 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 56 components and 0.121124 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064044Jy sigma=0.000762 ! Fit after self-cal, rms=0.064021Jy sigma=0.000762 ! Inverting map ! Added new window around map position (-24.5, 42.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00285897 Jy ! Component: 100 - total flux cleaned = 0.00306802 Jy ! Component: 150 - total flux cleaned = 0.00287288 Jy ! Component: 200 - total flux cleaned = 0.00259219 Jy ! Total flux subtracted in 200 components = 0.00259219 Jy ! Clean residual min=-0.002156 max=0.001994 Jy/beam ! Clean residual mean=0.000003 rms=0.000563 Jy/beam ! Combined flux in latest and established models = 0.123717 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 83 components and 0.123717 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063929Jy sigma=0.000761 ! Fit after self-cal, rms=0.063925Jy sigma=0.000761 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.01 mas, bmaj=7.542 mas, bpa=5.527 degrees ! Estimated noise=863.396 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.01 x 7.542 at 5.527 degrees (North through East) ! Clean map min=-0.0024081 max=0.093737 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.57 mas, bmaj=6.999 mas, bpa=5.813 degrees ! Estimated noise=1028.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0725415 Jy ! Component: 100 - total flux cleaned = 0.0904665 Jy ! Component: 150 - total flux cleaned = 0.0995453 Jy ! Component: 200 - total flux cleaned = 0.105429 Jy ! Total flux subtracted in 200 components = 0.105429 Jy ! Clean residual min=-0.004001 max=0.004604 Jy/beam ! Clean residual mean=0.000004 rms=0.001008 Jy/beam ! Combined flux in latest and established models = 0.105429 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.105429 Jy ! Inverting map and beam ! Estimated beam: bmin=3.01 mas, bmaj=7.542 mas, bpa=5.527 degrees ! Estimated noise=863.396 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00607351 Jy ! Component: 100 - total flux cleaned = 0.00984491 Jy ! Component: 150 - total flux cleaned = 0.0123033 Jy ! Component: 200 - total flux cleaned = 0.0137336 Jy ! Total flux subtracted in 200 components = 0.0137336 Jy ! Clean residual min=-0.002441 max=0.002503 Jy/beam ! Clean residual mean=0.000004 rms=0.000621 Jy/beam ! Combined flux in latest and established models = 0.119163 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 62 components and 0.119163 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.537 mas, bmaj=10.64 mas, bpa=-3.973 degrees ! Estimated noise=1134.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00277862 Jy ! Component: 100 - total flux cleaned = 0.00394022 Jy ! Component: 150 - total flux cleaned = 0.00414581 Jy ! Component: 200 - total flux cleaned = 0.00415003 Jy ! Total flux subtracted in 200 components = 0.00415003 Jy ! Clean residual min=-0.002372 max=0.002073 Jy/beam ! Clean residual mean=0.000003 rms=0.000579 Jy/beam ! Combined flux in latest and established models = 0.123313 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.41021e-06 Jy ! Component: 100 - total flux cleaned = -3.05288e-05 Jy ! Component: 150 - total flux cleaned = -2.76223e-07 Jy ! Component: 200 - total flux cleaned = -2.75651e-05 Jy ! Total flux subtracted in 200 components = -2.75651e-05 Jy ! Clean residual min=-0.002107 max=0.001946 Jy/beam ! Clean residual mean=0.000003 rms=0.000516 Jy/beam ! Combined flux in latest and established models = 0.123285 Jy ! Adding 67 model components to the UV plane model. ! The established model now contains 125 components and 0.123285 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.01 mas, bmaj=7.542 mas, bpa=5.527 degrees ! Estimated noise=863.396 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000560428 Jy ! Component: 100 - total flux cleaned = 0.000777429 Jy ! Component: 150 - total flux cleaned = 0.000856811 Jy ! Component: 200 - total flux cleaned = 0.000963803 Jy ! Total flux subtracted in 200 components = 0.000963803 Jy ! Clean residual min=-0.002234 max=0.002129 Jy/beam ! Clean residual mean=0.000001 rms=0.000484 Jy/beam ! Combined flux in latest and established models = 0.124249 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 156 components and 0.124249 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063852Jy sigma=0.000760 ! Fit after self-cal, rms=0.063853Jy sigma=0.000760 wmodel J1611+1856_S_2015_01_22_pus_map.mod ! Writing 156 model components to file: J1611+1856_S_2015_01_22_pus_map.mod wobs J1611+1856_S_2015_01_22_pus_uvs.fits ! Writing UV FITS file: J1611+1856_S_2015_01_22_pus_uvs.fits wwins J1611+1856_S_2015_01_22_pus_map.win ! wwins: Wrote 3 windows to J1611+1856_S_2015_01_22_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -8.20847e-05 Jy ! Component: 100 - total flux cleaned = -0.000118174 Jy ! Component: 150 - total flux cleaned = -0.000150783 Jy ! Component: 200 - total flux cleaned = -0.000181997 Jy ! Component: 250 - total flux cleaned = -0.000300832 Jy ! Component: 300 - total flux cleaned = -0.000357485 Jy ! Component: 350 - total flux cleaned = -0.00041218 Jy ! Component: 400 - total flux cleaned = -0.000541661 Jy ! Component: 450 - total flux cleaned = -0.000691897 Jy ! Component: 500 - total flux cleaned = -0.000836723 Jy ! Component: 550 - total flux cleaned = -0.000907249 Jy ! Component: 600 - total flux cleaned = -0.000885032 Jy ! Component: 650 - total flux cleaned = -0.000841137 Jy ! Component: 700 - total flux cleaned = -0.000711727 Jy ! Component: 750 - total flux cleaned = -0.000669299 Jy ! Component: 800 - total flux cleaned = -0.000524114 Jy ! Component: 850 - total flux cleaned = -0.000402338 Jy ! Component: 900 - total flux cleaned = -0.00026325 Jy ! Component: 950 - total flux cleaned = -0.000166038 Jy ! Component: 1000 - total flux cleaned = -7.05562e-05 Jy ! Component: 1050 - total flux cleaned = -3.27881e-05 Jy ! Component: 1100 - total flux cleaned = 4.05421e-05 Jy ! Component: 1150 - total flux cleaned = 3.91531e-06 Jy ! Component: 1200 - total flux cleaned = 3.81581e-06 Jy ! Component: 1250 - total flux cleaned = 3.79944e-06 Jy ! Component: 1300 - total flux cleaned = 3.78564e-06 Jy ! Component: 1350 - total flux cleaned = 7.19805e-05 Jy ! Component: 1400 - total flux cleaned = 8.88882e-05 Jy ! Component: 1450 - total flux cleaned = 0.000105222 Jy ! Component: 1500 - total flux cleaned = 0.000153756 Jy ! Component: 1550 - total flux cleaned = 0.000153561 Jy ! Component: 1600 - total flux cleaned = 0.000137788 Jy ! Component: 1650 - total flux cleaned = 0.000184701 Jy ! Component: 1700 - total flux cleaned = 0.000230875 Jy ! Component: 1750 - total flux cleaned = 0.000261176 Jy ! Component: 1800 - total flux cleaned = 0.000290844 Jy ! Component: 1850 - total flux cleaned = 0.00026125 Jy ! Component: 1900 - total flux cleaned = 0.000290156 Jy ! Component: 1950 - total flux cleaned = 0.000290315 Jy ! Component: 2000 - total flux cleaned = 0.000333264 Jy ! Component: 2050 - total flux cleaned = 0.000389559 Jy ! Component: 2100 - total flux cleaned = 0.000403572 Jy ! Component: 2150 - total flux cleaned = 0.000431005 Jy ! Component: 2200 - total flux cleaned = 0.000444696 Jy ! Component: 2250 - total flux cleaned = 0.000484965 Jy ! Component: 2300 - total flux cleaned = 0.000498366 Jy ! Component: 2350 - total flux cleaned = 0.000524587 Jy ! Component: 2400 - total flux cleaned = 0.000498547 Jy ! Component: 2450 - total flux cleaned = 0.000511469 Jy ! Component: 2500 - total flux cleaned = 0.000511294 Jy ! Component: 2550 - total flux cleaned = 0.000549213 Jy ! Component: 2600 - total flux cleaned = 0.000586786 Jy ! Component: 2650 - total flux cleaned = 0.00062408 Jy ! Component: 2700 - total flux cleaned = 0.000636535 Jy ! Component: 2750 - total flux cleaned = 0.000697554 Jy ! Component: 2800 - total flux cleaned = 0.000709638 Jy ! Component: 2850 - total flux cleaned = 0.000721596 Jy ! Component: 2900 - total flux cleaned = 0.000793078 Jy ! Component: 2950 - total flux cleaned = 0.000793058 Jy ! Component: 3000 - total flux cleaned = 0.000840023 Jy ! Component: 3050 - total flux cleaned = 0.000874899 Jy ! Component: 3100 - total flux cleaned = 0.00087483 Jy ! Component: 3150 - total flux cleaned = 0.000863327 Jy ! Component: 3200 - total flux cleaned = 0.000874803 Jy ! Component: 3250 - total flux cleaned = 0.000886236 Jy ! Component: 3300 - total flux cleaned = 0.000908817 Jy ! Component: 3350 - total flux cleaned = 0.000920031 Jy ! Component: 3400 - total flux cleaned = 0.000908775 Jy ! Component: 3450 - total flux cleaned = 0.000930916 Jy ! Component: 3500 - total flux cleaned = 0.00091987 Jy ! Component: 3550 - total flux cleaned = 0.00090893 Jy ! Component: 3600 - total flux cleaned = 0.000919902 Jy ! Component: 3650 - total flux cleaned = 0.00095248 Jy ! Component: 3700 - total flux cleaned = 0.000952442 Jy ! Component: 3750 - total flux cleaned = 0.000963242 Jy ! Component: 3800 - total flux cleaned = 0.000963226 Jy ! Component: 3850 - total flux cleaned = 0.000941841 Jy ! Component: 3900 - total flux cleaned = 0.000931294 Jy ! Component: 3950 - total flux cleaned = 0.000952473 Jy ! Component: 4000 - total flux cleaned = 0.000952507 Jy ! Component: 4050 - total flux cleaned = 0.000963079 Jy ! Total flux subtracted in 4096 components = 0.000973566 Jy ! Clean residual min=-0.000649 max=0.000676 Jy/beam ! Clean residual mean=0.000000 rms=0.000176 Jy/beam ! Combined flux in latest and established models = 0.125223 Jy keep ! Adding 246 model components to the UV plane model. ! The established model now contains 402 components and 0.125223 Jy ![Exited script file: muppet] wmap "J1611+1856_S_2015_01_22_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.01 x 7.542 at 5.527 degrees (North through East) ! Clean map min=-0.0022417 max=0.093973 Jy/beam ! Writing clean map to FITS file: J1611+1856_S_2015_01_22_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0939731 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000170951 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.545744 0.545744 1.09149 2.18298 4.36596 8.73191 17.4638 34.9276 69.8553 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.093 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.01 x 7.542 at 5.527 degrees (North through East) ! Clean map min=-0.0022417 max=0.093973 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1611+1856_S_2015_01_22_pus_uvs.log closed on Tue Jan 3 22:58:57 2017