! Started logfile: J1608+5613_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:31:15 2017 obs J1608+5613_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J1608+5613_S_2014_01_04_pus_uva.fits ! AN table 1: 58 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.777778 visibilities/baseline/integration-bin. ! Found source: J1608+5613 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 6496 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1608+5613_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.880123Jy sigma=0.012135 ! Fit after self-cal, rms=0.849801Jy sigma=0.011766 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.602 mas, bmaj=11.17 mas, bpa=48.42 degrees ! Estimated noise=1091.12 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.108118 Jy ! Component: 100 - total flux cleaned = 0.146199 Jy ! Total flux subtracted in 100 components = 0.146199 Jy ! Clean residual min=-0.009984 max=0.017218 Jy/beam ! Clean residual mean=-0.000104 rms=0.003069 Jy/beam ! Combined flux in latest and established models = 0.146199 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.146199 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085158Jy sigma=0.001018 ! Fit after self-cal, rms=0.085004Jy sigma=0.001017 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.324 mas, bmaj=11.05 mas, bpa=49.61 degrees ! Estimated noise=669.711 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0247736 Jy ! Component: 100 - total flux cleaned = 0.0366624 Jy ! Component: 150 - total flux cleaned = 0.0438437 Jy ! Component: 200 - total flux cleaned = 0.0483332 Jy ! Total flux subtracted in 200 components = 0.0483332 Jy ! Clean residual min=-0.005530 max=0.006143 Jy/beam ! Clean residual mean=-0.000057 rms=0.001554 Jy/beam ! Combined flux in latest and established models = 0.194532 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 32 components and 0.194532 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076648Jy sigma=0.000927 ! Fit after self-cal, rms=0.076258Jy sigma=0.000926 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.84 KP 1.00* LA 1.04 ! MK 1.03 NL 0.87 OV 0.98 PT 1.01 ! SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.01 KP 1.00* LA 0.99 ! MK 1.05 NL 0.95 OV 1.01 PT 0.99 ! SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.20 KP 1.00* LA 0.82 ! MK 1.08 NL 0.88 OV 0.94 PT 0.95 ! SC 1.08 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 1.02 KP 1.00* LA 0.90 ! MK 1.07 NL 0.96 OV 0.99 PT 1.01 ! SC 0.96 ! ! ! Fit before self-cal, rms=0.076258Jy sigma=0.000926 ! Fit after self-cal, rms=0.071865Jy sigma=0.000891 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.361 mas, bmaj=11.19 mas, bpa=49.37 degrees ! Estimated noise=665.096 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000705554 Jy ! Component: 100 - total flux cleaned = -0.00111295 Jy ! Component: 150 - total flux cleaned = -0.00146176 Jy ! Component: 200 - total flux cleaned = -0.00176693 Jy ! Total flux subtracted in 200 components = -0.00176693 Jy ! Clean residual min=-0.002285 max=0.002879 Jy/beam ! Clean residual mean=-0.000009 rms=0.000608 Jy/beam ! Combined flux in latest and established models = 0.192765 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 50 components and 0.192765 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071720Jy sigma=0.000890 ! Fit after self-cal, rms=0.071544Jy sigma=0.000889 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071544Jy sigma=0.000889 ! Fit after self-cal, rms=0.071506Jy sigma=0.000889 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.358 mas, bmaj=11.21 mas, bpa=49.34 degrees ! Estimated noise=665.895 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000318924 Jy ! Component: 100 - total flux cleaned = -0.000636277 Jy ! Component: 150 - total flux cleaned = -0.000916868 Jy ! Component: 200 - total flux cleaned = -0.00113328 Jy ! Total flux subtracted in 200 components = -0.00113328 Jy ! Clean residual min=-0.002088 max=0.002670 Jy/beam ! Clean residual mean=-0.000012 rms=0.000574 Jy/beam ! Combined flux in latest and established models = 0.191632 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 64 components and 0.191632 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071443Jy sigma=0.000889 ! Fit after self-cal, rms=0.071428Jy sigma=0.000889 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-90.5, -6.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00159101 Jy ! Component: 100 - total flux cleaned = 0.00148808 Jy ! Component: 150 - total flux cleaned = 0.00157892 Jy ! Component: 200 - total flux cleaned = 0.00153712 Jy ! Total flux subtracted in 200 components = 0.00153712 Jy ! Clean residual min=-0.001988 max=0.001899 Jy/beam ! Clean residual mean=-0.000016 rms=0.000468 Jy/beam ! Combined flux in latest and established models = 0.193169 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 94 components and 0.193169 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071322Jy sigma=0.000887 ! Fit after self-cal, rms=0.071313Jy sigma=0.000887 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071313Jy sigma=0.000887 ! Fit after self-cal, rms=0.071321Jy sigma=0.000887 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.353 mas, bmaj=11.22 mas, bpa=49.34 degrees ! Estimated noise=666.218 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000125363 Jy ! Component: 100 - total flux cleaned = -0.000123138 Jy ! Component: 150 - total flux cleaned = -0.000188465 Jy ! Component: 200 - total flux cleaned = -0.000313073 Jy ! Total flux subtracted in 200 components = -0.000313073 Jy ! Clean residual min=-0.001903 max=0.001859 Jy/beam ! Clean residual mean=-0.000013 rms=0.000435 Jy/beam ! Combined flux in latest and established models = 0.192856 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 101 components and 0.192856 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071280Jy sigma=0.000887 ! Fit after self-cal, rms=0.071281Jy sigma=0.000887 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000256803 Jy ! Component: 100 - total flux cleaned = -0.000397855 Jy ! Component: 150 - total flux cleaned = -0.000531293 Jy ! Component: 200 - total flux cleaned = -0.000633709 Jy ! Total flux subtracted in 200 components = -0.000633709 Jy ! Clean residual min=-0.001831 max=0.001790 Jy/beam ! Clean residual mean=-0.000013 rms=0.000417 Jy/beam ! Combined flux in latest and established models = 0.192222 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 112 components and 0.192222 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071256Jy sigma=0.000887 ! Fit after self-cal, rms=0.071254Jy sigma=0.000887 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071254Jy sigma=0.000887 ! Fit after self-cal, rms=0.071197Jy sigma=0.000887 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.999 mas, bmaj=11.23 mas, bpa=59.57 degrees ! Estimated noise=768.327 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000572076 Jy ! Component: 100 - total flux cleaned = -0.00092683 Jy ! Component: 150 - total flux cleaned = -0.00121309 Jy ! Component: 200 - total flux cleaned = -0.00134815 Jy ! Total flux subtracted in 200 components = -0.00134815 Jy ! Clean residual min=-0.001099 max=0.001483 Jy/beam ! Clean residual mean=-0.000025 rms=0.000373 Jy/beam ! Combined flux in latest and established models = 0.190874 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 130 components and 0.190874 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071190Jy sigma=0.000887 ! Fit after self-cal, rms=0.071192Jy sigma=0.000887 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000249627 Jy ! Component: 100 - total flux cleaned = -0.000365877 Jy ! Component: 150 - total flux cleaned = -0.000460232 Jy ! Component: 200 - total flux cleaned = -0.000548397 Jy ! Total flux subtracted in 200 components = -0.000548397 Jy ! Clean residual min=-0.001094 max=0.001469 Jy/beam ! Clean residual mean=-0.000024 rms=0.000356 Jy/beam ! Combined flux in latest and established models = 0.190326 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 147 components and 0.190326 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071190Jy sigma=0.000887 ! Fit after self-cal, rms=0.071190Jy sigma=0.000887 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.347 mas, bmaj=11.23 mas, bpa=49.34 degrees ! Estimated noise=666.322 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.347 x 11.23 at 49.34 degrees (North through East) ! Clean map min=-0.0016619 max=0.1528 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.603 mas, bmaj=11.42 mas, bpa=48.2 degrees ! Estimated noise=1099.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.109007 Jy ! Component: 100 - total flux cleaned = 0.14801 Jy ! Component: 150 - total flux cleaned = 0.167046 Jy ! Component: 200 - total flux cleaned = 0.177084 Jy ! Total flux subtracted in 200 components = 0.177084 Jy ! Clean residual min=-0.005157 max=0.005482 Jy/beam ! Clean residual mean=-0.000030 rms=0.001441 Jy/beam ! Combined flux in latest and established models = 0.177084 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.177084 Jy ! Inverting map and beam ! Estimated beam: bmin=3.347 mas, bmaj=11.23 mas, bpa=49.34 degrees ! Estimated noise=666.322 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00711516 Jy ! Component: 100 - total flux cleaned = 0.011274 Jy ! Component: 150 - total flux cleaned = 0.0135623 Jy ! Component: 200 - total flux cleaned = 0.0141415 Jy ! Total flux subtracted in 200 components = 0.0141415 Jy ! Clean residual min=-0.002332 max=0.002513 Jy/beam ! Clean residual mean=-0.000019 rms=0.000634 Jy/beam ! Combined flux in latest and established models = 0.191225 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 43 components and 0.191225 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.999 mas, bmaj=11.23 mas, bpa=59.57 degrees ! Estimated noise=768.327 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000139131 Jy ! Component: 100 - total flux cleaned = 7.56162e-05 Jy ! Component: 150 - total flux cleaned = -7.57723e-05 Jy ! Component: 200 - total flux cleaned = 9.18588e-06 Jy ! Total flux subtracted in 200 components = 9.18588e-06 Jy ! Clean residual min=-0.001688 max=0.001813 Jy/beam ! Clean residual mean=-0.000024 rms=0.000504 Jy/beam ! Combined flux in latest and established models = 0.191234 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000114115 Jy ! Component: 100 - total flux cleaned = 0.000248548 Jy ! Component: 150 - total flux cleaned = 0.000126768 Jy ! Component: 200 - total flux cleaned = 1.43653e-05 Jy ! Total flux subtracted in 200 components = 1.43653e-05 Jy ! Clean residual min=-0.001424 max=0.001674 Jy/beam ! Clean residual mean=-0.000021 rms=0.000434 Jy/beam ! Combined flux in latest and established models = 0.191249 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 90 components and 0.191249 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.347 mas, bmaj=11.23 mas, bpa=49.34 degrees ! Estimated noise=666.322 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000445738 Jy ! Component: 100 - total flux cleaned = -0.000340523 Jy ! Component: 150 - total flux cleaned = -0.00024888 Jy ! Component: 200 - total flux cleaned = -0.00016241 Jy ! Total flux subtracted in 200 components = -0.00016241 Jy ! Clean residual min=-0.001991 max=0.001893 Jy/beam ! Clean residual mean=-0.000010 rms=0.000452 Jy/beam ! Combined flux in latest and established models = 0.191086 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 109 components and 0.191086 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071325Jy sigma=0.000887 ! Fit after self-cal, rms=0.071333Jy sigma=0.000887 wmodel J1608+5613_S_2014_01_04_pus_map.mod ! Writing 109 model components to file: J1608+5613_S_2014_01_04_pus_map.mod wobs J1608+5613_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J1608+5613_S_2014_01_04_pus_uvs.fits wwins J1608+5613_S_2014_01_04_pus_map.win ! wwins: Wrote 2 windows to J1608+5613_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -7.41611e-05 Jy ! Component: 100 - total flux cleaned = -0.000248772 Jy ! Component: 150 - total flux cleaned = -0.00019573 Jy ! Component: 200 - total flux cleaned = -0.000219832 Jy ! Component: 250 - total flux cleaned = -0.000316638 Jy ! Component: 300 - total flux cleaned = -0.000456681 Jy ! Component: 350 - total flux cleaned = -0.000524315 Jy ! Component: 400 - total flux cleaned = -0.000590666 Jy ! Component: 450 - total flux cleaned = -0.000719078 Jy ! Component: 500 - total flux cleaned = -0.00078144 Jy ! Component: 550 - total flux cleaned = -0.000801243 Jy ! Component: 600 - total flux cleaned = -0.000860913 Jy ! Component: 650 - total flux cleaned = -0.000900066 Jy ! Component: 700 - total flux cleaned = -0.000919286 Jy ! Component: 750 - total flux cleaned = -0.000938174 Jy ! Component: 800 - total flux cleaned = -0.000919764 Jy ! Component: 850 - total flux cleaned = -0.000992081 Jy ! Component: 900 - total flux cleaned = -0.000992216 Jy ! Component: 950 - total flux cleaned = -0.00100989 Jy ! Component: 1000 - total flux cleaned = -0.00104424 Jy ! Component: 1050 - total flux cleaned = -0.00104414 Jy ! Component: 1100 - total flux cleaned = -0.0010443 Jy ! Component: 1150 - total flux cleaned = -0.00101145 Jy ! Component: 1200 - total flux cleaned = -0.00104375 Jy ! Component: 1250 - total flux cleaned = -0.000995798 Jy ! Component: 1300 - total flux cleaned = -0.000979997 Jy ! Component: 1350 - total flux cleaned = -0.000948954 Jy ! Component: 1400 - total flux cleaned = -0.000933308 Jy ! Component: 1450 - total flux cleaned = -0.000902725 Jy ! Component: 1500 - total flux cleaned = -0.000857569 Jy ! Component: 1550 - total flux cleaned = -0.000857806 Jy ! Component: 1600 - total flux cleaned = -0.000887429 Jy ! Component: 1650 - total flux cleaned = -0.000901914 Jy ! Component: 1700 - total flux cleaned = -0.000872741 Jy ! Component: 1750 - total flux cleaned = -0.000872722 Jy ! Component: 1800 - total flux cleaned = -0.000915302 Jy ! Component: 1850 - total flux cleaned = -0.000887126 Jy ! Component: 1900 - total flux cleaned = -0.000915269 Jy ! Component: 1950 - total flux cleaned = -0.000984403 Jy ! Component: 2000 - total flux cleaned = -0.000970643 Jy ! Component: 2050 - total flux cleaned = -0.000997797 Jy ! Component: 2100 - total flux cleaned = -0.00101125 Jy ! Component: 2150 - total flux cleaned = -0.00101121 Jy ! Component: 2200 - total flux cleaned = -0.00102446 Jy ! Component: 2250 - total flux cleaned = -0.00101125 Jy ! Component: 2300 - total flux cleaned = -0.0010243 Jy ! Component: 2350 - total flux cleaned = -0.000985179 Jy ! Component: 2400 - total flux cleaned = -0.000946392 Jy ! Component: 2450 - total flux cleaned = -0.000959155 Jy ! Component: 2500 - total flux cleaned = -0.000895339 Jy ! Component: 2550 - total flux cleaned = -0.000831899 Jy ! Component: 2600 - total flux cleaned = -0.000781366 Jy ! Component: 2650 - total flux cleaned = -0.000718597 Jy ! Component: 2700 - total flux cleaned = -0.000631218 Jy ! Component: 2750 - total flux cleaned = -0.000593901 Jy ! Component: 2800 - total flux cleaned = -0.000519664 Jy ! Component: 2850 - total flux cleaned = -0.000457982 Jy ! Component: 2900 - total flux cleaned = -0.000372 Jy ! Component: 2950 - total flux cleaned = -0.000310796 Jy ! Component: 3000 - total flux cleaned = -0.000249896 Jy ! Component: 3050 - total flux cleaned = -0.000177038 Jy ! Component: 3100 - total flux cleaned = -0.000164946 Jy ! Component: 3150 - total flux cleaned = -8.05887e-05 Jy ! Component: 3200 - total flux cleaned = -2.05854e-05 Jy ! Component: 3250 - total flux cleaned = 5.12763e-05 Jy ! Component: 3300 - total flux cleaned = 8.70841e-05 Jy ! Component: 3350 - total flux cleaned = 0.000158427 Jy ! Component: 3400 - total flux cleaned = 0.000229541 Jy ! Component: 3450 - total flux cleaned = 0.000253206 Jy ! Component: 3500 - total flux cleaned = 0.000312122 Jy ! Component: 3550 - total flux cleaned = 0.000347398 Jy ! Component: 3600 - total flux cleaned = 0.000464563 Jy ! Component: 3650 - total flux cleaned = 0.000499667 Jy ! Component: 3700 - total flux cleaned = 0.000569669 Jy ! Component: 3750 - total flux cleaned = 0.000674395 Jy ! Component: 3800 - total flux cleaned = 0.000732448 Jy ! Component: 3850 - total flux cleaned = 0.000790425 Jy ! Component: 3900 - total flux cleaned = 0.000859788 Jy ! Component: 3950 - total flux cleaned = 0.000929057 Jy ! Component: 4000 - total flux cleaned = 0.000986628 Jy ! Component: 4050 - total flux cleaned = 0.00105565 Jy ! Total flux subtracted in 4096 components = 0.00113598 Jy ! Clean residual min=-0.000757 max=0.000670 Jy/beam ! Clean residual mean=-0.000002 rms=0.000203 Jy/beam ! Combined flux in latest and established models = 0.192222 Jy keep ! Adding 256 model components to the UV plane model. ! The established model now contains 365 components and 0.192222 Jy ![Exited script file: muppet] wmap "J1608+5613_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.347 x 11.23 at 49.34 degrees (North through East) ! Clean map min=-0.0013875 max=0.15301 Jy/beam ! Writing clean map to FITS file: J1608+5613_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.153012 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000207954 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.407722 0.407722 0.815443 1.63089 3.26177 6.52355 13.0471 26.0942 52.1884 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.153 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.347 x 11.23 at 49.34 degrees (North through East) ! Clean map min=-0.0013875 max=0.15301 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1608+5613_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:31:19 2017