! Started logfile: J1608+4012_S_2015_01_22_pus_uvs.log on Tue Jan 3 22:58:43 2017 obs J1608+4012_S_2015_01_22_pus_uva.fits ! Reading UV FITS file: J1608+4012_S_2015_01_22_pus_uva.fits ! AN table 1: 54 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.622222 visibilities/baseline/integration-bin. ! Found source: J1608+4012 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 281 lines of history. ! ! Reading 6048 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1608+4012_S_2015_01_22_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 108 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 108 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 108 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 108 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.882412Jy sigma=0.011595 ! Fit after self-cal, rms=0.875789Jy sigma=0.011513 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.244 mas, bmaj=7.404 mas, bpa=15.33 degrees ! Estimated noise=1007.15 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0968766 Jy ! Component: 100 - total flux cleaned = 0.118051 Jy ! Total flux subtracted in 100 components = 0.118051 Jy ! Clean residual min=-0.004155 max=0.006540 Jy/beam ! Clean residual mean=0.000004 rms=0.001278 Jy/beam ! Combined flux in latest and established models = 0.118051 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.118051 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066385Jy sigma=0.000789 ! Fit after self-cal, rms=0.066381Jy sigma=0.000789 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.804 mas, bmaj=7.988 mas, bpa=15.84 degrees ! Estimated noise=705.731 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00755509 Jy ! Component: 100 - total flux cleaned = 0.0111009 Jy ! Component: 150 - total flux cleaned = 0.0132012 Jy ! Component: 200 - total flux cleaned = 0.0144927 Jy ! Total flux subtracted in 200 components = 0.0144927 Jy ! Clean residual min=-0.003149 max=0.003655 Jy/beam ! Clean residual mean=0.000004 rms=0.000889 Jy/beam ! Combined flux in latest and established models = 0.132543 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 26 components and 0.132543 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065385Jy sigma=0.000780 ! Fit after self-cal, rms=0.065402Jy sigma=0.000780 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00* HN 0.95 KP 1.12 ! LA 1.11 MK 1.06 NL 1.00* OV 0.99 ! PT 1.06 SC 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00* HN 1.04 KP 1.04 ! LA 1.04 MK 1.00 NL 1.00* OV 1.00 ! PT 1.02 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.00* HN 1.04 KP 0.86 ! LA 0.81 MK 1.05 NL 1.00* OV 0.97 ! PT 1.05 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.00* HN 0.90 KP 0.81 ! LA 0.94 MK 1.04 NL 1.00* OV 0.99 ! PT 1.06 SC 1.00 ! ! ! Fit before self-cal, rms=0.065402Jy sigma=0.000780 ! Fit after self-cal, rms=0.062240Jy sigma=0.000759 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.823 mas, bmaj=7.968 mas, bpa=15.73 degrees ! Estimated noise=703.278 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000425552 Jy ! Component: 100 - total flux cleaned = -0.000322326 Jy ! Component: 150 - total flux cleaned = -0.00028579 Jy ! Component: 200 - total flux cleaned = -0.000236156 Jy ! Total flux subtracted in 200 components = -0.000236156 Jy ! Clean residual min=-0.001817 max=0.002105 Jy/beam ! Clean residual mean=0.000000 rms=0.000475 Jy/beam ! Combined flux in latest and established models = 0.132307 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 35 components and 0.132307 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062224Jy sigma=0.000759 ! Fit after self-cal, rms=0.062222Jy sigma=0.000759 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062222Jy sigma=0.000759 ! Fit after self-cal, rms=0.062236Jy sigma=0.000759 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.824 mas, bmaj=7.967 mas, bpa=15.75 degrees ! Estimated noise=703.332 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.42098e-05 Jy ! Component: 100 - total flux cleaned = -6.95624e-05 Jy ! Component: 150 - total flux cleaned = -4.39771e-05 Jy ! Component: 200 - total flux cleaned = -8.38352e-06 Jy ! Total flux subtracted in 200 components = -8.38352e-06 Jy ! Clean residual min=-0.001772 max=0.002096 Jy/beam ! Clean residual mean=0.000000 rms=0.000467 Jy/beam ! Combined flux in latest and established models = 0.132299 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 39 components and 0.132299 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062229Jy sigma=0.000759 ! Fit after self-cal, rms=0.062229Jy sigma=0.000759 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-110.5, -58.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00183939 Jy ! Component: 100 - total flux cleaned = 0.00283745 Jy ! Component: 150 - total flux cleaned = 0.00320116 Jy ! Component: 200 - total flux cleaned = 0.00325263 Jy ! Total flux subtracted in 200 components = 0.00325263 Jy ! Clean residual min=-0.001605 max=0.001937 Jy/beam ! Clean residual mean=-0.000001 rms=0.000391 Jy/beam ! Combined flux in latest and established models = 0.135551 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 61 components and 0.135551 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062161Jy sigma=0.000758 ! Fit after self-cal, rms=0.062158Jy sigma=0.000758 ! Inverting map ! Added new window around map position (-72.5, -56.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000984875 Jy ! Component: 100 - total flux cleaned = 0.00148801 Jy ! Component: 150 - total flux cleaned = 0.00181226 Jy ! Component: 200 - total flux cleaned = 0.0018607 Jy ! Total flux subtracted in 200 components = 0.0018607 Jy ! Clean residual min=-0.001565 max=0.001354 Jy/beam ! Clean residual mean=0.000000 rms=0.000344 Jy/beam ! Combined flux in latest and established models = 0.137412 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 81 components and 0.137412 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062109Jy sigma=0.000757 ! Fit after self-cal, rms=0.062109Jy sigma=0.000757 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062109Jy sigma=0.000757 ! Fit after self-cal, rms=0.062040Jy sigma=0.000757 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.824 mas, bmaj=7.971 mas, bpa=15.8 degrees ! Estimated noise=701.703 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000787483 Jy ! Component: 100 - total flux cleaned = 0.00104548 Jy ! Component: 150 - total flux cleaned = 0.00108719 Jy ! Component: 200 - total flux cleaned = 0.00112565 Jy ! Total flux subtracted in 200 components = 0.00112565 Jy ! Clean residual min=-0.001499 max=0.001275 Jy/beam ! Clean residual mean=-0.000000 rms=0.000318 Jy/beam ! Combined flux in latest and established models = 0.138538 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 95 components and 0.138538 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062022Jy sigma=0.000757 ! Fit after self-cal, rms=0.062026Jy sigma=0.000757 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000166996 Jy ! Component: 100 - total flux cleaned = 0.000203338 Jy ! Component: 150 - total flux cleaned = 0.00018591 Jy ! Component: 200 - total flux cleaned = 0.000185886 Jy ! Total flux subtracted in 200 components = 0.000185886 Jy ! Clean residual min=-0.001455 max=0.001234 Jy/beam ! Clean residual mean=0.000000 rms=0.000311 Jy/beam ! Combined flux in latest and established models = 0.138724 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 105 components and 0.138724 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062016Jy sigma=0.000757 ! Fit after self-cal, rms=0.062016Jy sigma=0.000757 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062016Jy sigma=0.000757 ! Fit after self-cal, rms=0.062004Jy sigma=0.000757 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.939 mas, bmaj=9.422 mas, bpa=16.84 degrees ! Estimated noise=964.898 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000162877 Jy ! Component: 100 - total flux cleaned = 0.00019849 Jy ! Component: 150 - total flux cleaned = 0.000312055 Jy ! Component: 200 - total flux cleaned = 0.000411809 Jy ! Total flux subtracted in 200 components = 0.000411809 Jy ! Clean residual min=-0.001099 max=0.001134 Jy/beam ! Clean residual mean=0.000000 rms=0.000299 Jy/beam ! Combined flux in latest and established models = 0.139135 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 116 components and 0.139135 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062004Jy sigma=0.000757 ! Fit after self-cal, rms=0.062003Jy sigma=0.000757 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000113447 Jy ! Component: 100 - total flux cleaned = 0.000189678 Jy ! Component: 150 - total flux cleaned = 0.000257606 Jy ! Component: 200 - total flux cleaned = 0.000339301 Jy ! Total flux subtracted in 200 components = 0.000339301 Jy ! Clean residual min=-0.001036 max=0.001129 Jy/beam ! Clean residual mean=0.000001 rms=0.000290 Jy/beam ! Combined flux in latest and established models = 0.139475 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 127 components and 0.139475 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062004Jy sigma=0.000757 ! Fit after self-cal, rms=0.062003Jy sigma=0.000757 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.825 mas, bmaj=7.975 mas, bpa=15.82 degrees ! Estimated noise=701.272 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.825 x 7.975 at 15.82 degrees (North through East) ! Clean map min=-0.0014552 max=0.12456 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.265 mas, bmaj=7.422 mas, bpa=15.29 degrees ! Estimated noise=1002.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0964278 Jy ! Component: 100 - total flux cleaned = 0.11746 Jy ! Component: 150 - total flux cleaned = 0.123248 Jy ! Component: 200 - total flux cleaned = 0.12627 Jy ! Total flux subtracted in 200 components = 0.12627 Jy ! Clean residual min=-0.002913 max=0.003477 Jy/beam ! Clean residual mean=0.000001 rms=0.000736 Jy/beam ! Combined flux in latest and established models = 0.12627 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.12627 Jy ! Inverting map and beam ! Estimated beam: bmin=2.825 mas, bmaj=7.975 mas, bpa=15.82 degrees ! Estimated noise=701.272 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (15.5, -30.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00348757 Jy ! Component: 100 - total flux cleaned = 0.00525812 Jy ! Component: 150 - total flux cleaned = 0.00663048 Jy ! Component: 200 - total flux cleaned = 0.00771486 Jy ! Total flux subtracted in 200 components = 0.00771486 Jy ! Clean residual min=-0.001715 max=0.001480 Jy/beam ! Clean residual mean=0.000001 rms=0.000427 Jy/beam ! Combined flux in latest and established models = 0.133985 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 50 components and 0.133985 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.939 mas, bmaj=9.422 mas, bpa=16.84 degrees ! Estimated noise=964.898 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00147244 Jy ! Component: 100 - total flux cleaned = 0.00228271 Jy ! Component: 150 - total flux cleaned = 0.00271077 Jy ! Component: 200 - total flux cleaned = 0.00304247 Jy ! Total flux subtracted in 200 components = 0.00304247 Jy ! Clean residual min=-0.001556 max=0.001306 Jy/beam ! Clean residual mean=-0.000001 rms=0.000420 Jy/beam ! Combined flux in latest and established models = 0.137028 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000293036 Jy ! Component: 100 - total flux cleaned = 0.000531674 Jy ! Component: 150 - total flux cleaned = 0.000747232 Jy ! Component: 200 - total flux cleaned = 0.000962469 Jy ! Total flux subtracted in 200 components = 0.000962469 Jy ! Clean residual min=-0.001349 max=0.001282 Jy/beam ! Clean residual mean=-0.000001 rms=0.000362 Jy/beam ! Combined flux in latest and established models = 0.13799 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 99 components and 0.13799 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.825 mas, bmaj=7.975 mas, bpa=15.82 degrees ! Estimated noise=701.272 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00046041 Jy ! Component: 100 - total flux cleaned = 0.000524597 Jy ! Component: 150 - total flux cleaned = 0.000698024 Jy ! Component: 200 - total flux cleaned = 0.000670526 Jy ! Total flux subtracted in 200 components = 0.000670526 Jy ! Clean residual min=-0.001526 max=0.001336 Jy/beam ! Clean residual mean=0.000000 rms=0.000324 Jy/beam ! Combined flux in latest and established models = 0.138661 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 121 components and 0.138661 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062019Jy sigma=0.000757 ! Fit after self-cal, rms=0.062013Jy sigma=0.000757 wmodel J1608+4012_S_2015_01_22_pus_map.mod ! Writing 121 model components to file: J1608+4012_S_2015_01_22_pus_map.mod wobs J1608+4012_S_2015_01_22_pus_uvs.fits ! Writing UV FITS file: J1608+4012_S_2015_01_22_pus_uvs.fits wwins J1608+4012_S_2015_01_22_pus_map.win ! wwins: Wrote 4 windows to J1608+4012_S_2015_01_22_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000533534 Jy ! Component: 100 - total flux cleaned = -0.000629284 Jy ! Component: 150 - total flux cleaned = -0.000608059 Jy ! Component: 200 - total flux cleaned = -0.000607889 Jy ! Component: 250 - total flux cleaned = -0.000550405 Jy ! Component: 300 - total flux cleaned = -0.000623231 Jy ! Component: 350 - total flux cleaned = -0.000640743 Jy ! Component: 400 - total flux cleaned = -0.000675021 Jy ! Component: 450 - total flux cleaned = -0.00070768 Jy ! Component: 500 - total flux cleaned = -0.000755445 Jy ! Component: 550 - total flux cleaned = -0.000771238 Jy ! Component: 600 - total flux cleaned = -0.00077085 Jy ! Component: 650 - total flux cleaned = -0.000712298 Jy ! Component: 700 - total flux cleaned = -0.000712643 Jy ! Component: 750 - total flux cleaned = -0.000740757 Jy ! Component: 800 - total flux cleaned = -0.00078181 Jy ! Component: 850 - total flux cleaned = -0.000795052 Jy ! Component: 900 - total flux cleaned = -0.000769154 Jy ! Component: 950 - total flux cleaned = -0.000769406 Jy ! Component: 1000 - total flux cleaned = -0.000794776 Jy ! Component: 1050 - total flux cleaned = -0.00079464 Jy ! Component: 1100 - total flux cleaned = -0.000806782 Jy ! Component: 1150 - total flux cleaned = -0.000794757 Jy ! Component: 1200 - total flux cleaned = -0.000818445 Jy ! Component: 1250 - total flux cleaned = -0.000795204 Jy ! Component: 1300 - total flux cleaned = -0.000760967 Jy ! Component: 1350 - total flux cleaned = -0.000783541 Jy ! Component: 1400 - total flux cleaned = -0.000761432 Jy ! Component: 1450 - total flux cleaned = -0.000772316 Jy ! Component: 1500 - total flux cleaned = -0.000761514 Jy ! Component: 1550 - total flux cleaned = -0.000761374 Jy ! Component: 1600 - total flux cleaned = -0.000750949 Jy ! Component: 1650 - total flux cleaned = -0.000750914 Jy ! Component: 1700 - total flux cleaned = -0.000750841 Jy ! Component: 1750 - total flux cleaned = -0.000720776 Jy ! Component: 1800 - total flux cleaned = -0.000730554 Jy ! Component: 1850 - total flux cleaned = -0.000691687 Jy ! Component: 1900 - total flux cleaned = -0.000691759 Jy ! Component: 1950 - total flux cleaned = -0.000672741 Jy ! Component: 2000 - total flux cleaned = -0.00062588 Jy ! Component: 2050 - total flux cleaned = -0.000598219 Jy ! Component: 2100 - total flux cleaned = -0.000579883 Jy ! Component: 2150 - total flux cleaned = -0.000534663 Jy ! Component: 2200 - total flux cleaned = -0.000507896 Jy ! Component: 2250 - total flux cleaned = -0.000454896 Jy ! Component: 2300 - total flux cleaned = -0.000419998 Jy ! Component: 2350 - total flux cleaned = -0.000402704 Jy ! Component: 2400 - total flux cleaned = -0.000376913 Jy ! Component: 2450 - total flux cleaned = -0.000342919 Jy ! Component: 2500 - total flux cleaned = -0.000326139 Jy ! Component: 2550 - total flux cleaned = -0.000317736 Jy ! Component: 2600 - total flux cleaned = -0.000268187 Jy ! Component: 2650 - total flux cleaned = -0.000268245 Jy ! Component: 2700 - total flux cleaned = -0.000211381 Jy ! Component: 2750 - total flux cleaned = -0.00019516 Jy ! Component: 2800 - total flux cleaned = -0.000122999 Jy ! Component: 2850 - total flux cleaned = -0.000107015 Jy ! Component: 2900 - total flux cleaned = -5.1611e-05 Jy ! Component: 2950 - total flux cleaned = -4.48629e-06 Jy ! Component: 3000 - total flux cleaned = 2.67515e-05 Jy ! Component: 3050 - total flux cleaned = 6.55586e-05 Jy ! Component: 3100 - total flux cleaned = 0.000111926 Jy ! Component: 3150 - total flux cleaned = 0.000142621 Jy ! Component: 3200 - total flux cleaned = 0.00019611 Jy ! Component: 3250 - total flux cleaned = 0.000234067 Jy ! Component: 3300 - total flux cleaned = 0.000264254 Jy ! Component: 3350 - total flux cleaned = 0.000309419 Jy ! Component: 3400 - total flux cleaned = 0.000339484 Jy ! Component: 3450 - total flux cleaned = 0.000376871 Jy ! Component: 3500 - total flux cleaned = 0.000406639 Jy ! Component: 3550 - total flux cleaned = 0.000451133 Jy ! Component: 3600 - total flux cleaned = 0.00048065 Jy ! Component: 3650 - total flux cleaned = 0.000546844 Jy ! Component: 3700 - total flux cleaned = 0.000583532 Jy ! Component: 3750 - total flux cleaned = 0.000641948 Jy ! Component: 3800 - total flux cleaned = 0.000663808 Jy ! Component: 3850 - total flux cleaned = 0.000707383 Jy ! Component: 3900 - total flux cleaned = 0.000743617 Jy ! Component: 3950 - total flux cleaned = 0.000801333 Jy ! Component: 4000 - total flux cleaned = 0.000837324 Jy ! Component: 4050 - total flux cleaned = 0.000880403 Jy ! Total flux subtracted in 4096 components = 0.000923334 Jy ! Clean residual min=-0.000430 max=0.000454 Jy/beam ! Clean residual mean=0.000000 rms=0.000120 Jy/beam ! Combined flux in latest and established models = 0.139584 Jy keep ! Adding 221 model components to the UV plane model. ! The established model now contains 342 components and 0.139584 Jy ![Exited script file: muppet] wmap "J1608+4012_S_2015_01_22_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.825 x 7.975 at 15.82 degrees (North through East) ! Clean map min=-0.00082946 max=0.12346 Jy/beam ! Writing clean map to FITS file: J1608+4012_S_2015_01_22_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.123463 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000121294 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.294729 0.294729 0.589457 1.17891 2.35783 4.71566 9.43131 18.8626 37.7253 75.4505 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.123 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.825 x 7.975 at 15.82 degrees (North through East) ! Clean map min=-0.00082946 max=0.12346 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1608+4012_S_2015_01_22_pus_uvs.log closed on Tue Jan 3 22:58:50 2017