! Started logfile: J1608+1029_S_2015_01_23_pus_uvs.log on Mon Jan 2 19:29:26 2017 obs J1608+1029_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J1608+1029_S_2015_01_23_pus_uva.fits ! AN table 1: 14 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.706349 visibilities/baseline/integration-bin. ! Found source: J1608+1029 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 1780 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1608+1029_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.435143Jy sigma=0.005304 ! Fit after self-cal, rms=0.421894Jy sigma=0.005148 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.891 mas, bmaj=6.942 mas, bpa=-13.13 degrees ! Estimated noise=1652.36 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.464164 Jy ! Component: 100 - total flux cleaned = 0.595184 Jy ! Total flux subtracted in 100 components = 0.595184 Jy ! Clean residual min=-0.037922 max=0.069065 Jy/beam ! Clean residual mean=-0.000271 rms=0.011538 Jy/beam ! Combined flux in latest and established models = 0.595184 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.595184 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.177203Jy sigma=0.001941 ! Fit after self-cal, rms=0.177098Jy sigma=0.001940 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.282 mas, bmaj=7.603 mas, bpa=-13.53 degrees ! Estimated noise=1428.82 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (30, -12.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0816049 Jy ! Component: 100 - total flux cleaned = 0.12791 Jy ! Component: 150 - total flux cleaned = 0.158385 Jy ! Component: 200 - total flux cleaned = 0.180646 Jy ! Total flux subtracted in 200 components = 0.180646 Jy ! Clean residual min=-0.026037 max=0.039161 Jy/beam ! Clean residual mean=-0.000199 rms=0.007065 Jy/beam ! Combined flux in latest and established models = 0.77583 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 54 components and 0.77583 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126608Jy sigma=0.001388 ! Fit after self-cal, rms=0.124575Jy sigma=0.001361 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* HN 0.96 KP 1.07 ! LA 1.00 MK 1.02 NL 1.00 OV 0.97 ! PT 0.99 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00* HN 1.02 KP 1.00 ! LA 0.95 MK 1.02 NL 1.18 OV 1.01 ! PT 1.00 SC 1.08 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.00* HN 1.02 KP 0.87 ! LA 0.77 MK 1.05 NL 1.46 OV 0.94 ! PT 0.98 SC 1.09 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.00* HN 1.00 KP 0.82 ! LA 0.81 MK 1.02 NL 0.86 OV 0.99 ! PT 1.01 SC 1.06 ! ! ! Fit before self-cal, rms=0.124575Jy sigma=0.001361 ! Fit after self-cal, rms=0.073028Jy sigma=0.000814 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.331 mas, bmaj=7.745 mas, bpa=-13.63 degrees ! Estimated noise=1430.61 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00775159 Jy ! Component: 100 - total flux cleaned = -0.0092913 Jy ! Component: 150 - total flux cleaned = -0.0094391 Jy ! Component: 200 - total flux cleaned = -0.00957514 Jy ! Total flux subtracted in 200 components = -0.00957514 Jy ! Clean residual min=-0.008734 max=0.008444 Jy/beam ! Clean residual mean=-0.000036 rms=0.002171 Jy/beam ! Combined flux in latest and established models = 0.766255 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 69 components and 0.766255 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072050Jy sigma=0.000801 ! Fit after self-cal, rms=0.071919Jy sigma=0.000800 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071919Jy sigma=0.000800 ! Fit after self-cal, rms=0.071977Jy sigma=0.000798 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.335 mas, bmaj=7.755 mas, bpa=-13.66 degrees ! Estimated noise=1431.92 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0041779 Jy ! Component: 100 - total flux cleaned = -0.00499817 Jy ! Component: 150 - total flux cleaned = -0.00522926 Jy ! Component: 200 - total flux cleaned = -0.00533564 Jy ! Total flux subtracted in 200 components = -0.00533564 Jy ! Clean residual min=-0.007586 max=0.007465 Jy/beam ! Clean residual mean=-0.000034 rms=0.001941 Jy/beam ! Combined flux in latest and established models = 0.760919 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 88 components and 0.760919 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071473Jy sigma=0.000791 ! Fit after self-cal, rms=0.071438Jy sigma=0.000791 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000430793 Jy ! Component: 100 - total flux cleaned = -0.000617166 Jy ! Component: 150 - total flux cleaned = -0.000782579 Jy ! Component: 200 - total flux cleaned = -0.000858781 Jy ! Total flux subtracted in 200 components = -0.000858781 Jy ! Clean residual min=-0.007228 max=0.006922 Jy/beam ! Clean residual mean=-0.000035 rms=0.001877 Jy/beam ! Combined flux in latest and established models = 0.76006 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 95 components and 0.76006 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071251Jy sigma=0.000788 ! Fit after self-cal, rms=0.071232Jy sigma=0.000788 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071232Jy sigma=0.000788 ! Fit after self-cal, rms=0.071324Jy sigma=0.000786 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.337 mas, bmaj=7.76 mas, bpa=-13.67 degrees ! Estimated noise=1433.71 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00220379 Jy ! Component: 100 - total flux cleaned = -0.00240527 Jy ! Component: 150 - total flux cleaned = -0.00284713 Jy ! Component: 200 - total flux cleaned = -0.00316378 Jy ! Total flux subtracted in 200 components = -0.00316378 Jy ! Clean residual min=-0.006596 max=0.006329 Jy/beam ! Clean residual mean=-0.000030 rms=0.001726 Jy/beam ! Combined flux in latest and established models = 0.756897 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 110 components and 0.756896 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071049Jy sigma=0.000783 ! Fit after self-cal, rms=0.071031Jy sigma=0.000783 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000404126 Jy ! Component: 100 - total flux cleaned = -0.000405931 Jy ! Component: 150 - total flux cleaned = -0.00059872 Jy ! Component: 200 - total flux cleaned = -0.000599492 Jy ! Total flux subtracted in 200 components = -0.000599492 Jy ! Clean residual min=-0.006445 max=0.006063 Jy/beam ! Clean residual mean=-0.000031 rms=0.001690 Jy/beam ! Combined flux in latest and established models = 0.756297 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 118 components and 0.756297 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070918Jy sigma=0.000781 ! Fit after self-cal, rms=0.070910Jy sigma=0.000781 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070910Jy sigma=0.000781 ! Fit after self-cal, rms=0.070986Jy sigma=0.000780 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.6 mas, bmaj=10.97 mas, bpa=-1.778 degrees ! Estimated noise=1734.54 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000647889 Jy ! Component: 100 - total flux cleaned = -0.000209306 Jy ! Component: 150 - total flux cleaned = -0.000122383 Jy ! Component: 200 - total flux cleaned = -0.000121877 Jy ! Total flux subtracted in 200 components = -0.000121877 Jy ! Clean residual min=-0.007574 max=0.007509 Jy/beam ! Clean residual mean=-0.000052 rms=0.002344 Jy/beam ! Combined flux in latest and established models = 0.756175 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 133 components and 0.756175 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070869Jy sigma=0.000778 ! Fit after self-cal, rms=0.070845Jy sigma=0.000778 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00025072 Jy ! Component: 100 - total flux cleaned = -0.000179948 Jy ! Component: 150 - total flux cleaned = -6.01533e-05 Jy ! Component: 200 - total flux cleaned = -5.11117e-06 Jy ! Total flux subtracted in 200 components = -5.11117e-06 Jy ! Clean residual min=-0.007317 max=0.007235 Jy/beam ! Clean residual mean=-0.000052 rms=0.002285 Jy/beam ! Combined flux in latest and established models = 0.75617 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 144 components and 0.75617 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070829Jy sigma=0.000778 ! Fit after self-cal, rms=0.070820Jy sigma=0.000778 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.339 mas, bmaj=7.762 mas, bpa=-13.67 degrees ! Estimated noise=1434.82 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.339 x 7.762 at -13.67 degrees (North through East) ! Clean map min=-0.0075776 max=0.58204 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070820Jy sigma=0.000778 ! Fit after self-cal, rms=0.066649Jy sigma=0.000724 ! Inverting map and beam ! Estimated beam: bmin=3.341 mas, bmaj=7.751 mas, bpa=-13.59 degrees ! Estimated noise=1435.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00176392 Jy ! Component: 100 - total flux cleaned = -0.00151427 Jy ! Component: 150 - total flux cleaned = -0.00158573 Jy ! Component: 200 - total flux cleaned = -0.00152113 Jy ! Total flux subtracted in 200 components = -0.00152113 Jy ! Clean residual min=-0.005457 max=0.005804 Jy/beam ! Clean residual mean=-0.000026 rms=0.001488 Jy/beam ! Combined flux in latest and established models = 0.754649 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 155 components and 0.754649 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066444Jy sigma=0.000721 ! Fit after self-cal, rms=0.066430Jy sigma=0.000721 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000149608 Jy ! Component: 100 - total flux cleaned = -0.000152291 Jy ! Component: 150 - total flux cleaned = -0.000203289 Jy ! Component: 200 - total flux cleaned = -0.000154228 Jy ! Total flux subtracted in 200 components = -0.000154228 Jy ! Clean residual min=-0.005513 max=0.005618 Jy/beam ! Clean residual mean=-0.000026 rms=0.001466 Jy/beam ! Combined flux in latest and established models = 0.754495 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 158 components and 0.754495 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066345Jy sigma=0.000721 ! Fit after self-cal, rms=0.066340Jy sigma=0.000721 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066340Jy sigma=0.000721 ! Fit after self-cal, rms=0.066372Jy sigma=0.000720 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.936 mas, bmaj=7.082 mas, bpa=-13.23 degrees ! Estimated noise=1667.06 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.467842 Jy ! Component: 100 - total flux cleaned = 0.59355 Jy ! Component: 150 - total flux cleaned = 0.651078 Jy ! Component: 200 - total flux cleaned = 0.683528 Jy ! Total flux subtracted in 200 components = 0.683528 Jy ! Clean residual min=-0.014429 max=0.016841 Jy/beam ! Clean residual mean=-0.000086 rms=0.003702 Jy/beam ! Combined flux in latest and established models = 0.683528 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.683528 Jy ! Inverting map and beam ! Estimated beam: bmin=3.341 mas, bmaj=7.752 mas, bpa=-13.59 degrees ! Estimated noise=1434.92 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (51.5, -35). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0230548 Jy ! Component: 100 - total flux cleaned = 0.0376984 Jy ! Component: 150 - total flux cleaned = 0.0479098 Jy ! Component: 200 - total flux cleaned = 0.0554613 Jy ! Total flux subtracted in 200 components = 0.0554613 Jy ! Clean residual min=-0.009050 max=0.007789 Jy/beam ! Clean residual mean=-0.000054 rms=0.002005 Jy/beam ! Combined flux in latest and established models = 0.738989 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 72 components and 0.738989 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.601 mas, bmaj=10.96 mas, bpa=-1.519 degrees ! Estimated noise=1734.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0090282 Jy ! Component: 100 - total flux cleaned = 0.0135667 Jy ! Component: 150 - total flux cleaned = 0.0151193 Jy ! Component: 200 - total flux cleaned = 0.0161132 Jy ! Total flux subtracted in 200 components = 0.0161132 Jy ! Clean residual min=-0.006267 max=0.007572 Jy/beam ! Clean residual mean=-0.000041 rms=0.002024 Jy/beam ! Combined flux in latest and established models = 0.755102 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000425407 Jy ! Component: 100 - total flux cleaned = 0.000707463 Jy ! Component: 150 - total flux cleaned = 0.00079605 Jy ! Component: 200 - total flux cleaned = 0.000876149 Jy ! Total flux subtracted in 200 components = 0.000876149 Jy ! Clean residual min=-0.006074 max=0.006987 Jy/beam ! Clean residual mean=-0.000037 rms=0.001911 Jy/beam ! Combined flux in latest and established models = 0.755978 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 107 components and 0.755978 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.341 mas, bmaj=7.752 mas, bpa=-13.59 degrees ! Estimated noise=1434.92 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00201785 Jy ! Component: 100 - total flux cleaned = -0.00171753 Jy ! Component: 150 - total flux cleaned = -0.00145439 Jy ! Component: 200 - total flux cleaned = -0.00133763 Jy ! Total flux subtracted in 200 components = -0.00133763 Jy ! Clean residual min=-0.006673 max=0.006397 Jy/beam ! Clean residual mean=-0.000021 rms=0.001482 Jy/beam ! Combined flux in latest and established models = 0.75464 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 128 components and 0.754641 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066835Jy sigma=0.000726 ! Fit after self-cal, rms=0.066681Jy sigma=0.000724 wmodel J1608+1029_S_2015_01_23_pus_map.mod ! Writing 128 model components to file: J1608+1029_S_2015_01_23_pus_map.mod wobs J1608+1029_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J1608+1029_S_2015_01_23_pus_uvs.fits wwins J1608+1029_S_2015_01_23_pus_map.win ! wwins: Wrote 3 windows to J1608+1029_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000303024 Jy ! Component: 100 - total flux cleaned = -0.000687923 Jy ! Component: 150 - total flux cleaned = -0.000775529 Jy ! Component: 200 - total flux cleaned = -0.00110657 Jy ! Component: 250 - total flux cleaned = -0.00125802 Jy ! Component: 300 - total flux cleaned = -0.00111265 Jy ! Component: 350 - total flux cleaned = -0.00110877 Jy ! Component: 400 - total flux cleaned = -0.000842962 Jy ! Component: 450 - total flux cleaned = -0.000843288 Jy ! Component: 500 - total flux cleaned = -0.000723321 Jy ! Component: 550 - total flux cleaned = -0.000608545 Jy ! Component: 600 - total flux cleaned = -0.000441601 Jy ! Component: 650 - total flux cleaned = -0.000335851 Jy ! Component: 700 - total flux cleaned = -0.000231874 Jy ! Component: 750 - total flux cleaned = -8.27987e-05 Jy ! Component: 800 - total flux cleaned = 6.02097e-05 Jy ! Component: 850 - total flux cleaned = 0.000152409 Jy ! Component: 900 - total flux cleaned = 0.00024153 Jy ! Component: 950 - total flux cleaned = 0.000197238 Jy ! Component: 1000 - total flux cleaned = 0.000113497 Jy ! Component: 1050 - total flux cleaned = 0.000154794 Jy ! Component: 1100 - total flux cleaned = 0.000274993 Jy ! Component: 1150 - total flux cleaned = 0.00031434 Jy ! Component: 1200 - total flux cleaned = 0.000351571 Jy ! Component: 1250 - total flux cleaned = 0.000424668 Jy ! Component: 1300 - total flux cleaned = 0.000170077 Jy ! Component: 1350 - total flux cleaned = 0.000240337 Jy ! Component: 1400 - total flux cleaned = 3.1333e-05 Jy ! Component: 1450 - total flux cleaned = -7.03762e-05 Jy ! Component: 1500 - total flux cleaned = -0.00027162 Jy ! Component: 1550 - total flux cleaned = -0.000468463 Jy ! Component: 1600 - total flux cleaned = -0.000467654 Jy ! Component: 1650 - total flux cleaned = -0.000530739 Jy ! Component: 1700 - total flux cleaned = -0.000499592 Jy ! Component: 1750 - total flux cleaned = -0.000529817 Jy ! Component: 1800 - total flux cleaned = -0.000620401 Jy ! Component: 1850 - total flux cleaned = -0.000709505 Jy ! Component: 1900 - total flux cleaned = -0.000739448 Jy ! Component: 1950 - total flux cleaned = -0.000797583 Jy ! Component: 2000 - total flux cleaned = -0.000854351 Jy ! Component: 2050 - total flux cleaned = -0.000854358 Jy ! Component: 2100 - total flux cleaned = -0.000881864 Jy ! Component: 2150 - total flux cleaned = -0.000963685 Jy ! Component: 2200 - total flux cleaned = -0.000963593 Jy ! Component: 2250 - total flux cleaned = -0.000963642 Jy ! Component: 2300 - total flux cleaned = -0.00101628 Jy ! Component: 2350 - total flux cleaned = -0.0010423 Jy ! Component: 2400 - total flux cleaned = -0.00109344 Jy ! Component: 2450 - total flux cleaned = -0.00109345 Jy ! Component: 2500 - total flux cleaned = -0.00116875 Jy ! Component: 2550 - total flux cleaned = -0.00124254 Jy ! Component: 2600 - total flux cleaned = -0.00126721 Jy ! Component: 2650 - total flux cleaned = -0.00138804 Jy ! Component: 2700 - total flux cleaned = -0.00143581 Jy ! Component: 2750 - total flux cleaned = -0.00162424 Jy ! Component: 2800 - total flux cleaned = -0.00155393 Jy ! Component: 2850 - total flux cleaned = -0.00159991 Jy ! Component: 2900 - total flux cleaned = -0.00162255 Jy ! Component: 2950 - total flux cleaned = -0.00160012 Jy ! Component: 3000 - total flux cleaned = -0.00166756 Jy ! Component: 3050 - total flux cleaned = -0.00169002 Jy ! Component: 3100 - total flux cleaned = -0.00173413 Jy ! Component: 3150 - total flux cleaned = -0.00179957 Jy ! Component: 3200 - total flux cleaned = -0.00177782 Jy ! Component: 3250 - total flux cleaned = -0.0017349 Jy ! Component: 3300 - total flux cleaned = -0.001842 Jy ! Component: 3350 - total flux cleaned = -0.00182098 Jy ! Component: 3400 - total flux cleaned = -0.00192642 Jy ! Component: 3450 - total flux cleaned = -0.00196833 Jy ! Component: 3500 - total flux cleaned = -0.00198906 Jy ! Component: 3550 - total flux cleaned = -0.00207167 Jy ! Component: 3600 - total flux cleaned = -0.00211277 Jy ! Component: 3650 - total flux cleaned = -0.0021333 Jy ! Component: 3700 - total flux cleaned = -0.00219406 Jy ! Component: 3750 - total flux cleaned = -0.00217377 Jy ! Component: 3800 - total flux cleaned = -0.00221397 Jy ! Component: 3850 - total flux cleaned = -0.00217379 Jy ! Component: 3900 - total flux cleaned = -0.00219378 Jy ! Component: 3950 - total flux cleaned = -0.0021937 Jy ! Component: 4000 - total flux cleaned = -0.00219373 Jy ! Component: 4050 - total flux cleaned = -0.00215427 Jy ! Total flux subtracted in 4096 components = -0.00217408 Jy ! Clean residual min=-0.001102 max=0.001192 Jy/beam ! Clean residual mean=0.000001 rms=0.000342 Jy/beam ! Combined flux in latest and established models = 0.752466 Jy keep ! Adding 262 model components to the UV plane model. ! The established model now contains 390 components and 0.752466 Jy ![Exited script file: muppet] wmap "J1608+1029_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.341 x 7.752 at -13.59 degrees (North through East) ! Clean map min=-0.0039703 max=0.59006 Jy/beam ! Writing clean map to FITS file: J1608+1029_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.590062 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000330974 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.168274 0.168274 0.336549 0.673098 1.3462 2.69239 5.38478 10.7696 21.5391 43.0782 86.1565 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.59 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.341 x 7.752 at -13.59 degrees (North through East) ! Clean map min=-0.0039703 max=0.59006 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1608+1029_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 19:29:30 2017