! Started logfile: J1607-3331_S_2014_06_09_pus_uvs.log on Wed Nov 16 19:58:34 2016 obs J1607-3331_S_2014_06_09_pus_uva.fits ! Reading UV FITS file: J1607-3331_S_2014_06_09_pus_uva.fits ! AN table 1: 33 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.520539 visibilities/baseline/integration-bin. ! Found source: J1607-3331 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 336 lines of history. ! ! Reading 3092 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1607-3331_S_2014_06_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 101 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 101 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 101 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 101 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.910729Jy sigma=0.007816 ! Fit after self-cal, rms=0.873362Jy sigma=0.007515 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.464 mas, bmaj=8.321 mas, bpa=-10.38 degrees ! Estimated noise=1994.22 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.100346 Jy ! Component: 100 - total flux cleaned = 0.123556 Jy ! Total flux subtracted in 100 components = 0.123556 Jy ! Clean residual min=-0.007350 max=0.011322 Jy/beam ! Clean residual mean=0.000007 rms=0.002112 Jy/beam ! Combined flux in latest and established models = 0.123556 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.123556 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106989Jy sigma=0.000826 ! Fit after self-cal, rms=0.106914Jy sigma=0.000825 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.016 mas, bmaj=9.825 mas, bpa=-9.999 degrees ! Estimated noise=1512.1 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0130021 Jy ! Component: 100 - total flux cleaned = 0.0195523 Jy ! Component: 150 - total flux cleaned = 0.0231452 Jy ! Component: 200 - total flux cleaned = 0.0248169 Jy ! Total flux subtracted in 200 components = 0.0248169 Jy ! Clean residual min=-0.006518 max=0.007464 Jy/beam ! Clean residual mean=-0.000011 rms=0.001779 Jy/beam ! Combined flux in latest and established models = 0.148373 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 16 components and 0.148373 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105274Jy sigma=0.000811 ! Fit after self-cal, rms=0.105288Jy sigma=0.000811 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.08 HN 1.19 KP 0.96 ! LA 1.19 MK 1.01 NL 0.99 OV 0.91 ! PT 0.97 SC 0.90 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.84 HN 1.54 KP 0.98 ! LA 1.05 MK 0.97 NL 1.04 OV 0.94 ! PT 0.94 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.34 HN 1.15 KP 0.90 ! LA 0.87 MK 1.07 NL 0.93 OV 0.99 ! PT 1.06 SC 0.89 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.14 HN 1.18 KP 1.12 ! LA 0.86 MK 0.97 NL 1.01 OV 0.98 ! PT 0.98 SC 1.02 ! ! ! Fit before self-cal, rms=0.105288Jy sigma=0.000811 ! Fit after self-cal, rms=0.109918Jy sigma=0.000796 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.027 mas, bmaj=9.713 mas, bpa=-9.695 degrees ! Estimated noise=1529.11 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0015152 Jy ! Component: 100 - total flux cleaned = 0.0013605 Jy ! Component: 150 - total flux cleaned = 0.00123357 Jy ! Component: 200 - total flux cleaned = 0.00112875 Jy ! Total flux subtracted in 200 components = 0.00112875 Jy ! Clean residual min=-0.006275 max=0.006456 Jy/beam ! Clean residual mean=0.000003 rms=0.001553 Jy/beam ! Combined flux in latest and established models = 0.149502 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 24 components and 0.149502 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109848Jy sigma=0.000795 ! Fit after self-cal, rms=0.110071Jy sigma=0.000794 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110071Jy sigma=0.000794 ! Fit after self-cal, rms=0.117248Jy sigma=0.000768 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.03 mas, bmaj=9.69 mas, bpa=-9.582 degrees ! Estimated noise=1534.64 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00105791 Jy ! Component: 100 - total flux cleaned = 0.00119733 Jy ! Component: 150 - total flux cleaned = 0.00119728 Jy ! Component: 200 - total flux cleaned = 0.0011992 Jy ! Total flux subtracted in 200 components = 0.0011992 Jy ! Clean residual min=-0.004808 max=0.006004 Jy/beam ! Clean residual mean=0.000008 rms=0.001113 Jy/beam ! Combined flux in latest and established models = 0.150701 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 35 components and 0.150701 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117218Jy sigma=0.000768 ! Fit after self-cal, rms=0.117487Jy sigma=0.000768 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-17, -59). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00330965 Jy ! Component: 100 - total flux cleaned = 0.00307801 Jy ! Component: 150 - total flux cleaned = 0.00284295 Jy ! Component: 200 - total flux cleaned = 0.00256302 Jy ! Total flux subtracted in 200 components = 0.00256302 Jy ! Clean residual min=-0.004291 max=0.003747 Jy/beam ! Clean residual mean=-0.000001 rms=0.000979 Jy/beam ! Combined flux in latest and established models = 0.153264 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 53 components and 0.153264 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117146Jy sigma=0.000765 ! Fit after self-cal, rms=0.117145Jy sigma=0.000765 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117145Jy sigma=0.000765 ! Fit after self-cal, rms=0.118272Jy sigma=0.000765 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.018 mas, bmaj=9.687 mas, bpa=-9.567 degrees ! Estimated noise=1523.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000516271 Jy ! Component: 100 - total flux cleaned = 0.000185042 Jy ! Component: 150 - total flux cleaned = -4.42537e-05 Jy ! Component: 200 - total flux cleaned = -0.000250058 Jy ! Total flux subtracted in 200 components = -0.000250058 Jy ! Clean residual min=-0.004169 max=0.003683 Jy/beam ! Clean residual mean=-0.000004 rms=0.000931 Jy/beam ! Combined flux in latest and established models = 0.153014 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 61 components and 0.153014 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118174Jy sigma=0.000764 ! Fit after self-cal, rms=0.118213Jy sigma=0.000764 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.53817e-05 Jy ! Component: 100 - total flux cleaned = -0.000173132 Jy ! Component: 150 - total flux cleaned = -0.000257035 Jy ! Component: 200 - total flux cleaned = -0.000257188 Jy ! Total flux subtracted in 200 components = -0.000257188 Jy ! Clean residual min=-0.004170 max=0.003581 Jy/beam ! Clean residual mean=-0.000005 rms=0.000923 Jy/beam ! Combined flux in latest and established models = 0.152757 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 71 components and 0.152757 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118169Jy sigma=0.000764 ! Fit after self-cal, rms=0.118169Jy sigma=0.000764 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118169Jy sigma=0.000764 ! Fit after self-cal, rms=0.118039Jy sigma=0.000764 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.317 mas, bmaj=25.1 mas, bpa=-3.143 degrees ! Estimated noise=1937.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000188789 Jy ! Component: 100 - total flux cleaned = -0.000157053 Jy ! Component: 150 - total flux cleaned = -0.000158435 Jy ! Component: 200 - total flux cleaned = -0.000159161 Jy ! Total flux subtracted in 200 components = -0.000159161 Jy ! Clean residual min=-0.003776 max=0.003552 Jy/beam ! Clean residual mean=-0.000017 rms=0.001181 Jy/beam ! Combined flux in latest and established models = 0.152597 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 83 components and 0.152597 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118030Jy sigma=0.000764 ! Fit after self-cal, rms=0.118031Jy sigma=0.000764 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.94503e-05 Jy ! Component: 100 - total flux cleaned = 3.90188e-05 Jy ! Component: 150 - total flux cleaned = 3.78082e-05 Jy ! Component: 200 - total flux cleaned = 3.76968e-05 Jy ! Total flux subtracted in 200 components = 3.76968e-05 Jy ! Clean residual min=-0.003731 max=0.003589 Jy/beam ! Clean residual mean=-0.000018 rms=0.001185 Jy/beam ! Combined flux in latest and established models = 0.152635 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 87 components and 0.152635 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118029Jy sigma=0.000764 ! Fit after self-cal, rms=0.118032Jy sigma=0.000764 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.013 mas, bmaj=9.681 mas, bpa=-9.533 degrees ! Estimated noise=1521.11 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.013 x 9.681 at -9.533 degrees (North through East) ! Clean map min=-0.0043844 max=0.12362 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.471 mas, bmaj=8.153 mas, bpa=-9.784 degrees ! Estimated noise=2010.73 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.101051 Jy ! Component: 100 - total flux cleaned = 0.123972 Jy ! Component: 150 - total flux cleaned = 0.134494 Jy ! Component: 200 - total flux cleaned = 0.141047 Jy ! Total flux subtracted in 200 components = 0.141047 Jy ! Clean residual min=-0.005522 max=0.005012 Jy/beam ! Clean residual mean=0.000004 rms=0.001364 Jy/beam ! Combined flux in latest and established models = 0.141047 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 32 model components to the UV plane model. ! The established model now contains 32 components and 0.141047 Jy ! Inverting map and beam ! Estimated beam: bmin=3.013 mas, bmaj=9.681 mas, bpa=-9.533 degrees ! Estimated noise=1521.11 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, -12.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00681213 Jy ! Component: 100 - total flux cleaned = 0.00874778 Jy ! Component: 150 - total flux cleaned = 0.00978501 Jy ! Component: 200 - total flux cleaned = 0.0106267 Jy ! Total flux subtracted in 200 components = 0.0106267 Jy ! Clean residual min=-0.004516 max=0.003584 Jy/beam ! Clean residual mean=-0.000007 rms=0.001002 Jy/beam ! Combined flux in latest and established models = 0.151673 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 63 components and 0.151674 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.317 mas, bmaj=25.1 mas, bpa=-3.143 degrees ! Estimated noise=1937.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000860208 Jy ! Component: 100 - total flux cleaned = 0.00131119 Jy ! Component: 150 - total flux cleaned = 0.00130827 Jy ! Component: 200 - total flux cleaned = 0.00135231 Jy ! Total flux subtracted in 200 components = 0.00135231 Jy ! Clean residual min=-0.003951 max=0.003782 Jy/beam ! Clean residual mean=-0.000017 rms=0.001229 Jy/beam ! Combined flux in latest and established models = 0.153026 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.15445e-05 Jy ! Component: 100 - total flux cleaned = -7.88463e-05 Jy ! Component: 150 - total flux cleaned = -0.000145944 Jy ! Component: 200 - total flux cleaned = -0.000177497 Jy ! Total flux subtracted in 200 components = -0.000177497 Jy ! Clean residual min=-0.003873 max=0.003717 Jy/beam ! Clean residual mean=-0.000018 rms=0.001206 Jy/beam ! Combined flux in latest and established models = 0.152848 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 89 components and 0.152848 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.013 mas, bmaj=9.681 mas, bpa=-9.533 degrees ! Estimated noise=1521.11 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.92465e-06 Jy ! Component: 100 - total flux cleaned = -7.27454e-05 Jy ! Component: 150 - total flux cleaned = -7.30156e-05 Jy ! Component: 200 - total flux cleaned = -0.000126312 Jy ! Total flux subtracted in 200 components = -0.000126312 Jy ! Clean residual min=-0.004282 max=0.003597 Jy/beam ! Clean residual mean=-0.000008 rms=0.000931 Jy/beam ! Combined flux in latest and established models = 0.152722 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 110 components and 0.152722 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118089Jy sigma=0.000764 ! Fit after self-cal, rms=0.118085Jy sigma=0.000764 wmodel J1607-3331_S_2014_06_09_pus_map.mod ! Writing 110 model components to file: J1607-3331_S_2014_06_09_pus_map.mod wobs J1607-3331_S_2014_06_09_pus_uvs.fits ! Writing UV FITS file: J1607-3331_S_2014_06_09_pus_uvs.fits wwins J1607-3331_S_2014_06_09_pus_map.win ! wwins: Wrote 3 windows to J1607-3331_S_2014_06_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00154252 Jy ! Component: 100 - total flux cleaned = -0.00242909 Jy ! Component: 150 - total flux cleaned = -0.00296076 Jy ! Component: 200 - total flux cleaned = -0.00324048 Jy ! Component: 250 - total flux cleaned = -0.00340161 Jy ! Component: 300 - total flux cleaned = -0.00391441 Jy ! Component: 350 - total flux cleaned = -0.00416054 Jy ! Component: 400 - total flux cleaned = -0.00444972 Jy ! Component: 450 - total flux cleaned = -0.00477812 Jy ! Component: 500 - total flux cleaned = -0.00505252 Jy ! Component: 550 - total flux cleaned = -0.0051416 Jy ! Component: 600 - total flux cleaned = -0.00522875 Jy ! Component: 650 - total flux cleaned = -0.00527176 Jy ! Component: 700 - total flux cleaned = -0.00535506 Jy ! Component: 750 - total flux cleaned = -0.00539638 Jy ! Component: 800 - total flux cleaned = -0.00551692 Jy ! Component: 850 - total flux cleaned = -0.0056345 Jy ! Component: 900 - total flux cleaned = -0.0058645 Jy ! Component: 950 - total flux cleaned = -0.00608987 Jy ! Component: 1000 - total flux cleaned = -0.00616344 Jy ! Component: 1050 - total flux cleaned = -0.00627197 Jy ! Component: 1100 - total flux cleaned = -0.00630762 Jy ! Component: 1150 - total flux cleaned = -0.00641272 Jy ! Component: 1200 - total flux cleaned = -0.00634411 Jy ! Component: 1250 - total flux cleaned = -0.00651479 Jy ! Component: 1300 - total flux cleaned = -0.00651463 Jy ! Component: 1350 - total flux cleaned = -0.00668104 Jy ! Component: 1400 - total flux cleaned = -0.00671382 Jy ! Component: 1450 - total flux cleaned = -0.00681096 Jy ! Component: 1500 - total flux cleaned = -0.00684248 Jy ! Component: 1550 - total flux cleaned = -0.00681077 Jy ! Component: 1600 - total flux cleaned = -0.00690434 Jy ! Component: 1650 - total flux cleaned = -0.00687336 Jy ! Component: 1700 - total flux cleaned = -0.00681242 Jy ! Component: 1750 - total flux cleaned = -0.00681251 Jy ! Component: 1800 - total flux cleaned = -0.00687236 Jy ! Component: 1850 - total flux cleaned = -0.00687246 Jy ! Component: 1900 - total flux cleaned = -0.00690231 Jy ! Component: 1950 - total flux cleaned = -0.00698912 Jy ! Component: 2000 - total flux cleaned = -0.00696011 Jy ! Component: 2050 - total flux cleaned = -0.00698863 Jy ! Component: 2100 - total flux cleaned = -0.00696032 Jy ! Component: 2150 - total flux cleaned = -0.00701623 Jy ! Component: 2200 - total flux cleaned = -0.00698862 Jy ! Component: 2250 - total flux cleaned = -0.00704378 Jy ! Component: 2300 - total flux cleaned = -0.00709836 Jy ! Component: 2350 - total flux cleaned = -0.00709845 Jy ! Component: 2400 - total flux cleaned = -0.00712529 Jy ! Component: 2450 - total flux cleaned = -0.00717815 Jy ! Component: 2500 - total flux cleaned = -0.00709958 Jy ! Component: 2550 - total flux cleaned = -0.00720431 Jy ! Component: 2600 - total flux cleaned = -0.00725589 Jy ! Component: 2650 - total flux cleaned = -0.00725583 Jy ! Component: 2700 - total flux cleaned = -0.00717972 Jy ! Component: 2750 - total flux cleaned = -0.00725525 Jy ! Component: 2800 - total flux cleaned = -0.00735497 Jy ! Component: 2850 - total flux cleaned = -0.00720635 Jy ! Component: 2900 - total flux cleaned = -0.00723142 Jy ! Component: 2950 - total flux cleaned = -0.00728059 Jy ! Component: 3000 - total flux cleaned = -0.00730506 Jy ! Component: 3050 - total flux cleaned = -0.00728123 Jy ! Component: 3100 - total flux cleaned = -0.00735244 Jy ! Component: 3150 - total flux cleaned = -0.00735242 Jy ! Component: 3200 - total flux cleaned = -0.00735246 Jy ! Component: 3250 - total flux cleaned = -0.00742232 Jy ! Component: 3300 - total flux cleaned = -0.00742241 Jy ! Component: 3350 - total flux cleaned = -0.00744552 Jy ! Component: 3400 - total flux cleaned = -0.00753723 Jy ! Component: 3450 - total flux cleaned = -0.0075825 Jy ! Component: 3500 - total flux cleaned = -0.00756003 Jy ! Component: 3550 - total flux cleaned = -0.00760507 Jy ! Component: 3600 - total flux cleaned = -0.00767198 Jy ! Component: 3650 - total flux cleaned = -0.00771609 Jy ! Component: 3700 - total flux cleaned = -0.00775997 Jy ! Component: 3750 - total flux cleaned = -0.00784739 Jy ! Component: 3800 - total flux cleaned = -0.00793435 Jy ! Component: 3850 - total flux cleaned = -0.00799923 Jy ! Component: 3900 - total flux cleaned = -0.00808528 Jy ! Component: 3950 - total flux cleaned = -0.00819228 Jy ! Component: 4000 - total flux cleaned = -0.00823473 Jy ! Component: 4050 - total flux cleaned = -0.00831953 Jy ! Total flux subtracted in 4096 components = -0.00840404 Jy ! Clean residual min=-0.001368 max=0.001455 Jy/beam ! Clean residual mean=0.000003 rms=0.000376 Jy/beam ! Combined flux in latest and established models = 0.144318 Jy keep ! Adding 256 model components to the UV plane model. ! The established model now contains 366 components and 0.144318 Jy ![Exited script file: muppet] wmap "J1607-3331_S_2014_06_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.013 x 9.681 at -9.533 degrees (North through East) ! Clean map min=-0.0033197 max=0.12459 Jy/beam ! Writing clean map to FITS file: J1607-3331_S_2014_06_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.124588 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000361633 device "J1607-3331_S_2014_06_09_pus\_map.eps/VPS" ! Attempting to open device: 'J1607-3331_S_2014_06_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.870787 0.870787 1.74157 3.48315 6.96629 13.9326 27.8652 55.7303 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.124 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.013 x 9.681 at -9.533 degrees (North through East) ! Clean map min=-0.0033197 max=0.12459 Jy/beam quit ! Quitting program ! Log file J1607-3331_S_2014_06_09_pus_uvs.log closed on Wed Nov 16 19:58:39 2016