! Started logfile: J1607-3331_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:31:11 2017 obs J1607-3331_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J1607-3331_S_2014_01_04_pus_uva.fits ! AN table 1: 40 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.305556 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1607-3331 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 1760 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1607-3331_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 220 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 220 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 220 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 220 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.920590Jy sigma=0.008231 ! Fit after self-cal, rms=0.879592Jy sigma=0.007994 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.372 mas, bmaj=6.545 mas, bpa=10.68 degrees ! Estimated noise=2555.91 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.098118 Jy ! Component: 100 - total flux cleaned = 0.121741 Jy ! Total flux subtracted in 100 components = 0.121741 Jy ! Clean residual min=-0.010127 max=0.011871 Jy/beam ! Clean residual mean=-0.000048 rms=0.003277 Jy/beam ! Combined flux in latest and established models = 0.121741 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.121741 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119849Jy sigma=0.000945 ! Fit after self-cal, rms=0.119739Jy sigma=0.000944 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.885 mas, bmaj=7.331 mas, bpa=7.933 degrees ! Estimated noise=1979.99 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0146609 Jy ! Component: 100 - total flux cleaned = 0.0215623 Jy ! Component: 150 - total flux cleaned = 0.0252515 Jy ! Component: 200 - total flux cleaned = 0.0273509 Jy ! Total flux subtracted in 200 components = 0.0273509 Jy ! Clean residual min=-0.007448 max=0.007715 Jy/beam ! Clean residual mean=0.000024 rms=0.002141 Jy/beam ! Combined flux in latest and established models = 0.149092 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 41 components and 0.149092 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118192Jy sigma=0.000926 ! Fit after self-cal, rms=0.118306Jy sigma=0.000926 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00* KP 1.00* LA 1.03 ! MK 1.01 NL 1.31 OV 0.98 PT 1.03 ! SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.00* KP 1.00* LA 0.97 ! MK 1.08 NL 1.06 OV 1.07 PT 1.05 ! SC 1.24 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.82 FD 1.00* KP 1.00* LA 0.84 ! MK 0.99 NL 1.12 OV 0.88 PT 0.94 ! SC 0.92 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.00* KP 1.00* LA 0.91 ! MK 1.06 NL 1.09 OV 1.09 PT 0.92 ! SC 1.05 ! ! ! Fit before self-cal, rms=0.118306Jy sigma=0.000926 ! Fit after self-cal, rms=0.120259Jy sigma=0.000909 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.923 mas, bmaj=7.369 mas, bpa=8.196 degrees ! Estimated noise=1986.46 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00024554 Jy ! Component: 100 - total flux cleaned = -0.000305847 Jy ! Component: 150 - total flux cleaned = -0.000389769 Jy ! Component: 200 - total flux cleaned = -0.000465391 Jy ! Total flux subtracted in 200 components = -0.000465391 Jy ! Clean residual min=-0.006354 max=0.007026 Jy/beam ! Clean residual mean=0.000091 rms=0.001645 Jy/beam ! Combined flux in latest and established models = 0.148626 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 44 components and 0.148626 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120246Jy sigma=0.000909 ! Fit after self-cal, rms=0.120669Jy sigma=0.000908 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120669Jy sigma=0.000908 ! Fit after self-cal, rms=0.121087Jy sigma=0.000908 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.928 mas, bmaj=7.37 mas, bpa=8.368 degrees ! Estimated noise=1988.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.36692e-05 Jy ! Component: 100 - total flux cleaned = 2.5434e-05 Jy ! Component: 150 - total flux cleaned = 1.76534e-06 Jy ! Component: 200 - total flux cleaned = -4.31374e-05 Jy ! Total flux subtracted in 200 components = -4.31374e-05 Jy ! Clean residual min=-0.006223 max=0.007179 Jy/beam ! Clean residual mean=0.000090 rms=0.001644 Jy/beam ! Combined flux in latest and established models = 0.148583 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 55 components and 0.148583 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121072Jy sigma=0.000908 ! Fit after self-cal, rms=0.121150Jy sigma=0.000908 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-117, 31.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00580331 Jy ! Component: 100 - total flux cleaned = 0.00680481 Jy ! Component: 150 - total flux cleaned = 0.00701824 Jy ! Component: 200 - total flux cleaned = 0.00746088 Jy ! Total flux subtracted in 200 components = 0.00746088 Jy ! Clean residual min=-0.005515 max=0.005311 Jy/beam ! Clean residual mean=0.000067 rms=0.001465 Jy/beam ! Combined flux in latest and established models = 0.156044 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 70 components and 0.156044 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120813Jy sigma=0.000905 ! Fit after self-cal, rms=0.120874Jy sigma=0.000905 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120874Jy sigma=0.000905 ! Fit after self-cal, rms=0.120487Jy sigma=0.000905 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.933 mas, bmaj=7.371 mas, bpa=8.686 degrees ! Estimated noise=1977.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0015672 Jy ! Component: 100 - total flux cleaned = 0.00168174 Jy ! Component: 150 - total flux cleaned = 0.00193756 Jy ! Component: 200 - total flux cleaned = 0.00202798 Jy ! Total flux subtracted in 200 components = 0.00202798 Jy ! Clean residual min=-0.005392 max=0.004932 Jy/beam ! Clean residual mean=0.000053 rms=0.001429 Jy/beam ! Combined flux in latest and established models = 0.158072 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 79 components and 0.158072 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120403Jy sigma=0.000904 ! Fit after self-cal, rms=0.120490Jy sigma=0.000904 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000218649 Jy ! Component: 100 - total flux cleaned = 0.000393262 Jy ! Component: 150 - total flux cleaned = 0.000474231 Jy ! Component: 200 - total flux cleaned = 0.000624441 Jy ! Total flux subtracted in 200 components = 0.000624441 Jy ! Clean residual min=-0.005363 max=0.005029 Jy/beam ! Clean residual mean=0.000050 rms=0.001427 Jy/beam ! Combined flux in latest and established models = 0.158697 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 86 components and 0.158697 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120446Jy sigma=0.000904 ! Fit after self-cal, rms=0.120483Jy sigma=0.000904 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120483Jy sigma=0.000904 ! Fit after self-cal, rms=0.120412Jy sigma=0.000904 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.337 mas, bmaj=21.57 mas, bpa=11.52 degrees ! Estimated noise=2434.22 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00161283 Jy ! Component: 100 - total flux cleaned = 0.00272454 Jy ! Component: 150 - total flux cleaned = 0.0035925 Jy ! Component: 200 - total flux cleaned = 0.0042873 Jy ! Total flux subtracted in 200 components = 0.0042873 Jy ! Clean residual min=-0.005676 max=0.005540 Jy/beam ! Clean residual mean=0.000114 rms=0.001770 Jy/beam ! Combined flux in latest and established models = 0.162984 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 91 components and 0.162984 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120391Jy sigma=0.000904 ! Fit after self-cal, rms=0.120394Jy sigma=0.000904 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000602094 Jy ! Component: 100 - total flux cleaned = 0.00101978 Jy ! Component: 150 - total flux cleaned = 0.00139787 Jy ! Component: 200 - total flux cleaned = 0.00169748 Jy ! Total flux subtracted in 200 components = 0.00169748 Jy ! Clean residual min=-0.005745 max=0.005490 Jy/beam ! Clean residual mean=0.000104 rms=0.001760 Jy/beam ! Combined flux in latest and established models = 0.164681 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 95 components and 0.164681 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120388Jy sigma=0.000904 ! Fit after self-cal, rms=0.120385Jy sigma=0.000904 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.932 mas, bmaj=7.366 mas, bpa=8.855 degrees ! Estimated noise=1977.58 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.932 x 7.366 at 8.855 degrees (North through East) ! Clean map min=-0.0049696 max=0.12507 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.369 mas, bmaj=6.535 mas, bpa=12.12 degrees ! Estimated noise=2583.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0983828 Jy ! Component: 100 - total flux cleaned = 0.123537 Jy ! Component: 150 - total flux cleaned = 0.134176 Jy ! Component: 200 - total flux cleaned = 0.139858 Jy ! Total flux subtracted in 200 components = 0.139858 Jy ! Clean residual min=-0.008439 max=0.007934 Jy/beam ! Clean residual mean=0.000014 rms=0.002157 Jy/beam ! Combined flux in latest and established models = 0.139858 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.139858 Jy ! Inverting map and beam ! Estimated beam: bmin=2.932 mas, bmaj=7.366 mas, bpa=8.855 degrees ! Estimated noise=1977.58 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00646477 Jy ! Component: 100 - total flux cleaned = 0.0102065 Jy ! Component: 150 - total flux cleaned = 0.0126758 Jy ! Component: 200 - total flux cleaned = 0.0146646 Jy ! Total flux subtracted in 200 components = 0.0146646 Jy ! Clean residual min=-0.006042 max=0.005287 Jy/beam ! Clean residual mean=0.000058 rms=0.001513 Jy/beam ! Combined flux in latest and established models = 0.154523 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 43 components and 0.154523 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.337 mas, bmaj=21.57 mas, bpa=11.52 degrees ! Estimated noise=2434.22 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0029062 Jy ! Component: 100 - total flux cleaned = 0.00456245 Jy ! Component: 150 - total flux cleaned = 0.00593296 Jy ! Component: 200 - total flux cleaned = 0.00707575 Jy ! Total flux subtracted in 200 components = 0.00707575 Jy ! Clean residual min=-0.005945 max=0.005239 Jy/beam ! Clean residual mean=0.000128 rms=0.001813 Jy/beam ! Combined flux in latest and established models = 0.161599 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000956408 Jy ! Component: 100 - total flux cleaned = 0.00175999 Jy ! Component: 150 - total flux cleaned = 0.00244479 Jy ! Component: 200 - total flux cleaned = 0.00303188 Jy ! Total flux subtracted in 200 components = 0.00303188 Jy ! Clean residual min=-0.005844 max=0.005459 Jy/beam ! Clean residual mean=0.000128 rms=0.001795 Jy/beam ! Combined flux in latest and established models = 0.16463 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 62 components and 0.16463 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.932 mas, bmaj=7.366 mas, bpa=8.855 degrees ! Estimated noise=1977.58 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000355702 Jy ! Component: 100 - total flux cleaned = -0.000963067 Jy ! Component: 150 - total flux cleaned = -0.00141706 Jy ! Component: 200 - total flux cleaned = -0.00175559 Jy ! Total flux subtracted in 200 components = -0.00175559 Jy ! Clean residual min=-0.005652 max=0.005174 Jy/beam ! Clean residual mean=0.000046 rms=0.001414 Jy/beam ! Combined flux in latest and established models = 0.162875 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 77 components and 0.162875 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120366Jy sigma=0.000904 ! Fit after self-cal, rms=0.120392Jy sigma=0.000904 wmodel J1607-3331_S_2014_01_04_pus_map.mod ! Writing 77 model components to file: J1607-3331_S_2014_01_04_pus_map.mod wobs J1607-3331_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J1607-3331_S_2014_01_04_pus_uvs.fits wwins J1607-3331_S_2014_01_04_pus_map.win ! wwins: Wrote 2 windows to J1607-3331_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000736082 Jy ! Component: 100 - total flux cleaned = -0.000571303 Jy ! Component: 150 - total flux cleaned = -0.000416223 Jy ! Component: 200 - total flux cleaned = -0.0004171 Jy ! Component: 250 - total flux cleaned = -0.000143793 Jy ! Component: 300 - total flux cleaned = 4.79396e-05 Jy ! Component: 350 - total flux cleaned = 0.000229177 Jy ! Component: 400 - total flux cleaned = 0.000459258 Jy ! Component: 450 - total flux cleaned = 0.000516522 Jy ! Component: 500 - total flux cleaned = 0.000675388 Jy ! Component: 550 - total flux cleaned = 0.000874497 Jy ! Component: 600 - total flux cleaned = 0.0010149 Jy ! Component: 650 - total flux cleaned = 0.00101472 Jy ! Component: 700 - total flux cleaned = 0.00105724 Jy ! Component: 750 - total flux cleaned = 0.00105609 Jy ! Component: 800 - total flux cleaned = 0.00101504 Jy ! Component: 850 - total flux cleaned = 0.00113448 Jy ! Component: 900 - total flux cleaned = 0.000940598 Jy ! Component: 950 - total flux cleaned = 0.00094067 Jy ! Component: 1000 - total flux cleaned = 0.000904636 Jy ! Component: 1050 - total flux cleaned = 0.000904439 Jy ! Component: 1100 - total flux cleaned = 0.000869361 Jy ! Component: 1150 - total flux cleaned = 0.000834798 Jy ! Component: 1200 - total flux cleaned = 0.000768346 Jy ! Component: 1250 - total flux cleaned = 0.000833745 Jy ! Component: 1300 - total flux cleaned = 0.000705116 Jy ! Component: 1350 - total flux cleaned = 0.000705631 Jy ! Component: 1400 - total flux cleaned = 0.00064352 Jy ! Component: 1450 - total flux cleaned = 0.000674671 Jy ! Component: 1500 - total flux cleaned = 0.000704932 Jy ! Component: 1550 - total flux cleaned = 0.000674922 Jy ! Component: 1600 - total flux cleaned = 0.00073456 Jy ! Component: 1650 - total flux cleaned = 0.000763914 Jy ! Component: 1700 - total flux cleaned = 0.000735192 Jy ! Component: 1750 - total flux cleaned = 0.000792413 Jy ! Component: 1800 - total flux cleaned = 0.000735859 Jy ! Component: 1850 - total flux cleaned = 0.000735789 Jy ! Component: 1900 - total flux cleaned = 0.000680086 Jy ! Component: 1950 - total flux cleaned = 0.000652703 Jy ! Component: 2000 - total flux cleaned = 0.000652853 Jy ! Component: 2050 - total flux cleaned = 0.000652941 Jy ! Component: 2100 - total flux cleaned = 0.000706549 Jy ! Component: 2150 - total flux cleaned = 0.000706482 Jy ! Component: 2200 - total flux cleaned = 0.000759673 Jy ! Component: 2250 - total flux cleaned = 0.000838793 Jy ! Component: 2300 - total flux cleaned = 0.00086479 Jy ! Component: 2350 - total flux cleaned = 0.000864807 Jy ! Component: 2400 - total flux cleaned = 0.000916673 Jy ! Component: 2450 - total flux cleaned = 0.000994044 Jy ! Component: 2500 - total flux cleaned = 0.000993899 Jy ! Component: 2550 - total flux cleaned = 0.00101955 Jy ! Component: 2600 - total flux cleaned = 0.000993835 Jy ! Component: 2650 - total flux cleaned = 0.00104499 Jy ! Component: 2700 - total flux cleaned = 0.00109624 Jy ! Component: 2750 - total flux cleaned = 0.00107079 Jy ! Component: 2800 - total flux cleaned = 0.00112184 Jy ! Component: 2850 - total flux cleaned = 0.00119845 Jy ! Component: 2900 - total flux cleaned = 0.00117311 Jy ! Component: 2950 - total flux cleaned = 0.00117305 Jy ! Component: 3000 - total flux cleaned = 0.00117324 Jy ! Component: 3050 - total flux cleaned = 0.00124999 Jy ! Component: 3100 - total flux cleaned = 0.0012501 Jy ! Component: 3150 - total flux cleaned = 0.00125001 Jy ! Component: 3200 - total flux cleaned = 0.00132711 Jy ! Component: 3250 - total flux cleaned = 0.00135291 Jy ! Component: 3300 - total flux cleaned = 0.00140446 Jy ! Component: 3350 - total flux cleaned = 0.00143037 Jy ! Component: 3400 - total flux cleaned = 0.0014821 Jy ! Component: 3450 - total flux cleaned = 0.00155981 Jy ! Component: 3500 - total flux cleaned = 0.0016117 Jy ! Component: 3550 - total flux cleaned = 0.00166367 Jy ! Component: 3600 - total flux cleaned = 0.001742 Jy ! Component: 3650 - total flux cleaned = 0.00187324 Jy ! Component: 3700 - total flux cleaned = 0.00192592 Jy ! Component: 3750 - total flux cleaned = 0.00208465 Jy ! Component: 3800 - total flux cleaned = 0.00219087 Jy ! Component: 3850 - total flux cleaned = 0.00229732 Jy ! Component: 3900 - total flux cleaned = 0.00240471 Jy ! Component: 3950 - total flux cleaned = 0.00248559 Jy ! Component: 4000 - total flux cleaned = 0.00264896 Jy ! Component: 4050 - total flux cleaned = 0.00275909 Jy ! Total flux subtracted in 4096 components = 0.00286955 Jy ! Clean residual min=-0.001619 max=0.001692 Jy/beam ! Clean residual mean=0.000000 rms=0.000460 Jy/beam ! Combined flux in latest and established models = 0.165744 Jy keep ! Adding 202 model components to the UV plane model. ! The established model now contains 279 components and 0.165745 Jy ![Exited script file: muppet] wmap "J1607-3331_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.932 x 7.366 at 8.855 degrees (North through East) ! Clean map min=-0.0023418 max=0.1245 Jy/beam ! Writing clean map to FITS file: J1607-3331_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.124503 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000511107 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.23155 1.23155 2.4631 4.92621 9.85241 19.7048 39.4096 78.8193 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.124 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.932 x 7.366 at 8.855 degrees (North through East) ! Clean map min=-0.0023418 max=0.1245 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1607-3331_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:31:15 2017