! Started logfile: J1606-1929_S_2014_08_09_pus_uvs.log on Tue Nov 29 23:09:41 2016 obs J1606-1929_S_2014_08_09_pus_uva.fits ! Reading UV FITS file: J1606-1929_S_2014_08_09_pus_uva.fits ! AN table 1: 124 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.752688 visibilities/baseline/integration-bin. ! Found source: J1606-1929 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 342 lines of history. ! ! Reading 16800 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1606-1929_S_2014_08_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 170 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 170 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 170 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 170 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.980607Jy sigma=0.008694 ! Fit after self-cal, rms=0.944207Jy sigma=0.008388 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.367 mas, bmaj=9.745 mas, bpa=19.18 degrees ! Estimated noise=911.697 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0449318 Jy ! Component: 100 - total flux cleaned = 0.0552714 Jy ! Total flux subtracted in 100 components = 0.0552714 Jy ! Clean residual min=-0.003092 max=0.003921 Jy/beam ! Clean residual mean=-0.000006 rms=0.000827 Jy/beam ! Combined flux in latest and established models = 0.0552714 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0552714 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097500Jy sigma=0.000767 ! Fit after self-cal, rms=0.097082Jy sigma=0.000764 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.238 mas, bmaj=11.3 mas, bpa=17.23 degrees ! Estimated noise=628.716 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00642981 Jy ! Component: 100 - total flux cleaned = 0.00952155 Jy ! Component: 150 - total flux cleaned = 0.0113622 Jy ! Component: 200 - total flux cleaned = 0.0125028 Jy ! Total flux subtracted in 200 components = 0.0125028 Jy ! Clean residual min=-0.002380 max=0.001969 Jy/beam ! Clean residual mean=-0.000000 rms=0.000584 Jy/beam ! Combined flux in latest and established models = 0.0677742 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 42 components and 0.0677742 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096614Jy sigma=0.000760 ! Fit after self-cal, rms=0.096602Jy sigma=0.000760 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.92 HN 0.96 KP 1.13 ! LA 1.06 MK 1.00* NL 0.96 OV 1.02 ! PT 1.01 SC 1.07 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.06 HN 1.02 KP 1.01 ! LA 0.99 MK 1.00* NL 1.00 OV 1.02 ! PT 1.06 SC 1.04 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.07 HN 1.10 KP 0.90 ! LA 0.84 MK 1.00* NL 0.96 OV 1.01 ! PT 0.99 SC 1.02 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.02 HN 1.03 KP 0.89 ! LA 0.80 MK 1.00* NL 1.01 OV 0.99 ! PT 0.95 SC 0.99 ! ! ! Fit before self-cal, rms=0.096602Jy sigma=0.000760 ! Fit after self-cal, rms=0.095822Jy sigma=0.000759 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.279 mas, bmaj=11.37 mas, bpa=17.07 degrees ! Estimated noise=630.53 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000640842 Jy ! Component: 100 - total flux cleaned = 0.000688167 Jy ! Component: 150 - total flux cleaned = 0.000714391 Jy ! Component: 200 - total flux cleaned = 0.000726837 Jy ! Total flux subtracted in 200 components = 0.000726837 Jy ! Clean residual min=-0.002011 max=0.001817 Jy/beam ! Clean residual mean=-0.000000 rms=0.000519 Jy/beam ! Combined flux in latest and established models = 0.068501 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 47 components and 0.068501 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095813Jy sigma=0.000758 ! Fit after self-cal, rms=0.095776Jy sigma=0.000758 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095776Jy sigma=0.000758 ! Fit after self-cal, rms=0.095126Jy sigma=0.000757 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.287 mas, bmaj=11.41 mas, bpa=17.13 degrees ! Estimated noise=632.908 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.91283e-05 Jy ! Component: 100 - total flux cleaned = 9.97745e-05 Jy ! Component: 150 - total flux cleaned = 0.000111758 Jy ! Component: 200 - total flux cleaned = 9.15068e-05 Jy ! Total flux subtracted in 200 components = 9.15068e-05 Jy ! Clean residual min=-0.001855 max=0.001726 Jy/beam ! Clean residual mean=-0.000003 rms=0.000471 Jy/beam ! Combined flux in latest and established models = 0.0685925 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 57 components and 0.0685925 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095120Jy sigma=0.000757 ! Fit after self-cal, rms=0.095093Jy sigma=0.000757 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.7247e-05 Jy ! Component: 100 - total flux cleaned = 0.000129021 Jy ! Component: 150 - total flux cleaned = 0.000139893 Jy ! Component: 200 - total flux cleaned = 0.000149656 Jy ! Total flux subtracted in 200 components = 0.000149656 Jy ! Clean residual min=-0.001847 max=0.001757 Jy/beam ! Clean residual mean=-0.000002 rms=0.000475 Jy/beam ! Combined flux in latest and established models = 0.0687422 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 58 components and 0.0687422 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095089Jy sigma=0.000757 ! Fit after self-cal, rms=0.095088Jy sigma=0.000757 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095088Jy sigma=0.000757 ! Fit after self-cal, rms=0.095077Jy sigma=0.000757 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.277 mas, bmaj=11.4 mas, bpa=17.21 degrees ! Estimated noise=633.707 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000118619 Jy ! Component: 100 - total flux cleaned = 0.000175333 Jy ! Component: 150 - total flux cleaned = 0.000184812 Jy ! Component: 200 - total flux cleaned = 0.000193358 Jy ! Total flux subtracted in 200 components = 0.000193358 Jy ! Clean residual min=-0.001798 max=0.001741 Jy/beam ! Clean residual mean=-0.000003 rms=0.000470 Jy/beam ! Combined flux in latest and established models = 0.0689355 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 60 components and 0.0689355 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095073Jy sigma=0.000757 ! Fit after self-cal, rms=0.095068Jy sigma=0.000757 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.81386e-05 Jy ! Component: 100 - total flux cleaned = 5.82971e-05 Jy ! Component: 150 - total flux cleaned = 4.14153e-05 Jy ! Component: 200 - total flux cleaned = 4.12637e-05 Jy ! Total flux subtracted in 200 components = 4.12637e-05 Jy ! Clean residual min=-0.001756 max=0.001743 Jy/beam ! Clean residual mean=-0.000003 rms=0.000471 Jy/beam ! Combined flux in latest and established models = 0.0689768 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 62 components and 0.0689768 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095065Jy sigma=0.000757 ! Fit after self-cal, rms=0.095064Jy sigma=0.000757 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095064Jy sigma=0.000757 ! Fit after self-cal, rms=0.095080Jy sigma=0.000757 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.247 mas, bmaj=16.83 mas, bpa=8.997 degrees ! Estimated noise=717.375 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.82101e-05 Jy ! Component: 100 - total flux cleaned = 4.8458e-05 Jy ! Component: 150 - total flux cleaned = 6.18502e-05 Jy ! Component: 200 - total flux cleaned = 7.21802e-05 Jy ! Total flux subtracted in 200 components = 7.21802e-05 Jy ! Clean residual min=-0.001680 max=0.001706 Jy/beam ! Clean residual mean=-0.000004 rms=0.000540 Jy/beam ! Combined flux in latest and established models = 0.069049 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 74 components and 0.069049 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095079Jy sigma=0.000757 ! Fit after self-cal, rms=0.095076Jy sigma=0.000757 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.65091e-05 Jy ! Component: 100 - total flux cleaned = -5.29582e-05 Jy ! Component: 150 - total flux cleaned = -5.8248e-05 Jy ! Component: 200 - total flux cleaned = -5.80204e-05 Jy ! Total flux subtracted in 200 components = -5.80204e-05 Jy ! Clean residual min=-0.001683 max=0.001707 Jy/beam ! Clean residual mean=-0.000004 rms=0.000540 Jy/beam ! Combined flux in latest and established models = 0.0689909 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 78 components and 0.0689909 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095077Jy sigma=0.000757 ! Fit after self-cal, rms=0.095076Jy sigma=0.000757 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.268 mas, bmaj=11.39 mas, bpa=17.28 degrees ! Estimated noise=634.528 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.268 x 11.39 at 17.28 degrees (North through East) ! Clean map min=-0.0017077 max=0.058159 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.364 mas, bmaj=9.823 mas, bpa=19.28 degrees ! Estimated noise=924.691 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0454957 Jy ! Component: 100 - total flux cleaned = 0.0568053 Jy ! Component: 150 - total flux cleaned = 0.0619029 Jy ! Component: 200 - total flux cleaned = 0.0648071 Jy ! Total flux subtracted in 200 components = 0.0648071 Jy ! Clean residual min=-0.002802 max=0.002646 Jy/beam ! Clean residual mean=-0.000005 rms=0.000650 Jy/beam ! Combined flux in latest and established models = 0.0648071 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.0648071 Jy ! Inverting map and beam ! Estimated beam: bmin=4.268 mas, bmaj=11.39 mas, bpa=17.28 degrees ! Estimated noise=634.528 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4, -10.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00255127 Jy ! Component: 100 - total flux cleaned = 0.00399724 Jy ! Component: 150 - total flux cleaned = 0.00441565 Jy ! Component: 200 - total flux cleaned = 0.00473147 Jy ! Total flux subtracted in 200 components = 0.00473147 Jy ! Clean residual min=-0.001816 max=0.001741 Jy/beam ! Clean residual mean=-0.000003 rms=0.000468 Jy/beam ! Combined flux in latest and established models = 0.0695386 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 43 components and 0.0695386 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.247 mas, bmaj=16.83 mas, bpa=8.997 degrees ! Estimated noise=717.375 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000533297 Jy ! Component: 100 - total flux cleaned = 0.000765303 Jy ! Component: 150 - total flux cleaned = 0.000923784 Jy ! Component: 200 - total flux cleaned = 0.000938619 Jy ! Total flux subtracted in 200 components = 0.000938619 Jy ! Clean residual min=-0.001575 max=0.001709 Jy/beam ! Clean residual mean=-0.000004 rms=0.000513 Jy/beam ! Combined flux in latest and established models = 0.0704772 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.30229e-05 Jy ! Component: 100 - total flux cleaned = -2.4934e-05 Jy ! Component: 150 - total flux cleaned = -2.50667e-05 Jy ! Component: 200 - total flux cleaned = -3.60791e-05 Jy ! Total flux subtracted in 200 components = -3.60791e-05 Jy ! Clean residual min=-0.001578 max=0.001707 Jy/beam ! Clean residual mean=-0.000004 rms=0.000509 Jy/beam ! Combined flux in latest and established models = 0.0704411 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 70 components and 0.0704411 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.268 mas, bmaj=11.39 mas, bpa=17.28 degrees ! Estimated noise=634.528 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.41844e-05 Jy ! Component: 100 - total flux cleaned = 9.94222e-05 Jy ! Component: 150 - total flux cleaned = 9.91306e-05 Jy ! Component: 200 - total flux cleaned = 6.28257e-05 Jy ! Total flux subtracted in 200 components = 6.28257e-05 Jy ! Clean residual min=-0.001720 max=0.001767 Jy/beam ! Clean residual mean=-0.000002 rms=0.000451 Jy/beam ! Combined flux in latest and established models = 0.0705039 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 87 components and 0.0705039 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095057Jy sigma=0.000757 ! Fit after self-cal, rms=0.095049Jy sigma=0.000757 wmodel J1606-1929_S_2014_08_09_pus_map.mod ! Writing 87 model components to file: J1606-1929_S_2014_08_09_pus_map.mod wobs J1606-1929_S_2014_08_09_pus_uvs.fits ! Writing UV FITS file: J1606-1929_S_2014_08_09_pus_uvs.fits wwins J1606-1929_S_2014_08_09_pus_map.win ! wwins: Wrote 2 windows to J1606-1929_S_2014_08_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000431622 Jy ! Component: 100 - total flux cleaned = 0.000692581 Jy ! Component: 150 - total flux cleaned = 0.000747973 Jy ! Component: 200 - total flux cleaned = 0.00080027 Jy ! Component: 250 - total flux cleaned = 0.000774551 Jy ! Component: 300 - total flux cleaned = 0.000750346 Jy ! Component: 350 - total flux cleaned = 0.000894638 Jy ! Component: 400 - total flux cleaned = 0.000894839 Jy ! Component: 450 - total flux cleaned = 0.000940327 Jy ! Component: 500 - total flux cleaned = 0.000895971 Jy ! Component: 550 - total flux cleaned = 0.000895999 Jy ! Component: 600 - total flux cleaned = 0.000916684 Jy ! Component: 650 - total flux cleaned = 0.000874565 Jy ! Component: 700 - total flux cleaned = 0.000813242 Jy ! Component: 750 - total flux cleaned = 0.000833022 Jy ! Component: 800 - total flux cleaned = 0.000813098 Jy ! Component: 850 - total flux cleaned = 0.000794139 Jy ! Component: 900 - total flux cleaned = 0.000775126 Jy ! Component: 950 - total flux cleaned = 0.000756489 Jy ! Component: 1000 - total flux cleaned = 0.000756353 Jy ! Component: 1050 - total flux cleaned = 0.000756313 Jy ! Component: 1100 - total flux cleaned = 0.00075646 Jy ! Component: 1150 - total flux cleaned = 0.000791668 Jy ! Component: 1200 - total flux cleaned = 0.000791742 Jy ! Component: 1250 - total flux cleaned = 0.000825934 Jy ! Component: 1300 - total flux cleaned = 0.000876814 Jy ! Component: 1350 - total flux cleaned = 0.000926563 Jy ! Component: 1400 - total flux cleaned = 0.000942562 Jy ! Component: 1450 - total flux cleaned = 0.000990853 Jy ! Component: 1500 - total flux cleaned = 0.000942822 Jy ! Component: 1550 - total flux cleaned = 0.000990469 Jy ! Component: 1600 - total flux cleaned = 0.00102183 Jy ! Component: 1650 - total flux cleaned = 0.00105285 Jy ! Component: 1700 - total flux cleaned = 0.00100725 Jy ! Component: 1750 - total flux cleaned = 0.00106749 Jy ! Component: 1800 - total flux cleaned = 0.00108213 Jy ! Component: 1850 - total flux cleaned = 0.00105287 Jy ! Component: 1900 - total flux cleaned = 0.00108192 Jy ! Component: 1950 - total flux cleaned = 0.00100971 Jy ! Component: 2000 - total flux cleaned = 0.00103808 Jy ! Component: 2050 - total flux cleaned = 0.000953027 Jy ! Component: 2100 - total flux cleaned = 0.000953266 Jy ! Component: 2150 - total flux cleaned = 0.000953307 Jy ! Component: 2200 - total flux cleaned = 0.000952932 Jy ! Component: 2250 - total flux cleaned = 0.000925502 Jy ! Component: 2300 - total flux cleaned = 0.000925467 Jy ! Component: 2350 - total flux cleaned = 0.000925458 Jy ! Component: 2400 - total flux cleaned = 0.000912248 Jy ! Component: 2450 - total flux cleaned = 0.00091231 Jy ! Component: 2500 - total flux cleaned = 0.000925477 Jy ! Component: 2550 - total flux cleaned = 0.000951409 Jy ! Component: 2600 - total flux cleaned = 0.000989971 Jy ! Component: 2650 - total flux cleaned = 0.00100264 Jy ! Component: 2700 - total flux cleaned = 0.00104048 Jy ! Component: 2750 - total flux cleaned = 0.00102788 Jy ! Component: 2800 - total flux cleaned = 0.00101539 Jy ! Component: 2850 - total flux cleaned = 0.00105248 Jy ! Component: 2900 - total flux cleaned = 0.00106475 Jy ! Component: 2950 - total flux cleaned = 0.00107701 Jy ! Component: 3000 - total flux cleaned = 0.00111311 Jy ! Component: 3050 - total flux cleaned = 0.00110102 Jy ! Component: 3100 - total flux cleaned = 0.00108913 Jy ! Component: 3150 - total flux cleaned = 0.00112422 Jy ! Component: 3200 - total flux cleaned = 0.00113591 Jy ! Component: 3250 - total flux cleaned = 0.00118221 Jy ! Component: 3300 - total flux cleaned = 0.001205 Jy ! Component: 3350 - total flux cleaned = 0.00119349 Jy ! Component: 3400 - total flux cleaned = 0.00121608 Jy ! Component: 3450 - total flux cleaned = 0.00122717 Jy ! Component: 3500 - total flux cleaned = 0.00120488 Jy ! Component: 3550 - total flux cleaned = 0.001249 Jy ! Component: 3600 - total flux cleaned = 0.00121597 Jy ! Component: 3650 - total flux cleaned = 0.00117239 Jy ! Component: 3700 - total flux cleaned = 0.00120486 Jy ! Component: 3750 - total flux cleaned = 0.00114033 Jy ! Component: 3800 - total flux cleaned = 0.00108703 Jy ! Component: 3850 - total flux cleaned = 0.00109772 Jy ! Component: 3900 - total flux cleaned = 0.0010557 Jy ! Component: 3950 - total flux cleaned = 0.00109755 Jy ! Component: 4000 - total flux cleaned = 0.00101459 Jy ! Component: 4050 - total flux cleaned = 0.00102497 Jy ! Total flux subtracted in 4096 components = 0.00102499 Jy ! Clean residual min=-0.000582 max=0.000592 Jy/beam ! Clean residual mean=0.000002 rms=0.000195 Jy/beam ! Combined flux in latest and established models = 0.0715289 Jy keep ! Adding 253 model components to the UV plane model. ! The established model now contains 340 components and 0.0715289 Jy ![Exited script file: muppet] wmap "J1606-1929_S_2014_08_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.268 x 11.39 at 17.28 degrees (North through East) ! Clean map min=-0.0012465 max=0.058006 Jy/beam ! Writing clean map to FITS file: J1606-1929_S_2014_08_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0580064 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000194248 device "J1606-1929_S_2014_08_09_pus\_map.eps/VPS" ! Attempting to open device: 'J1606-1929_S_2014_08_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.00462 1.00462 2.00925 4.01849 8.03699 16.074 32.1479 64.2959 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.058 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.268 x 11.39 at 17.28 degrees (North through East) ! Clean map min=-0.0012465 max=0.058006 Jy/beam quit ! Quitting program ! Log file J1606-1929_S_2014_08_09_pus_uvs.log closed on Tue Nov 29 23:09:46 2016