! Started logfile: J1606+2717_S_2015_01_22_pus_uvs.log on Tue Jan 3 22:58:29 2017 obs J1606+2717_S_2015_01_22_pus_uva.fits ! Reading UV FITS file: J1606+2717_S_2015_01_22_pus_uva.fits ! AN table 1: 42 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.8 visibilities/baseline/integration-bin. ! Found source: J1606+2717 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 281 lines of history. ! ! Reading 6048 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1606+2717_S_2015_01_22_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.842593Jy sigma=0.010524 ! Fit after self-cal, rms=0.832807Jy sigma=0.010408 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.687 mas, bmaj=7.224 mas, bpa=14.85 degrees ! Estimated noise=949.412 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.127957 Jy ! Component: 100 - total flux cleaned = 0.157131 Jy ! Total flux subtracted in 100 components = 0.157131 Jy ! Clean residual min=-0.006476 max=0.011196 Jy/beam ! Clean residual mean=0.000015 rms=0.001935 Jy/beam ! Combined flux in latest and established models = 0.157131 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.157131 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072880Jy sigma=0.000837 ! Fit after self-cal, rms=0.072882Jy sigma=0.000837 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.138 mas, bmaj=7.728 mas, bpa=14.76 degrees ! Estimated noise=739.701 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0154643 Jy ! Component: 100 - total flux cleaned = 0.0227002 Jy ! Component: 150 - total flux cleaned = 0.0270393 Jy ! Component: 200 - total flux cleaned = 0.0299885 Jy ! Total flux subtracted in 200 components = 0.0299885 Jy ! Clean residual min=-0.005626 max=0.005865 Jy/beam ! Clean residual mean=0.000019 rms=0.001371 Jy/beam ! Combined flux in latest and established models = 0.187119 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 43 components and 0.187119 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069349Jy sigma=0.000800 ! Fit after self-cal, rms=0.069347Jy sigma=0.000799 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00* HN 0.95 KP 1.07 ! LA 1.05 MK 1.02 NL 1.03 OV 0.99 ! PT 1.02 SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00* HN 1.01 KP 0.99 ! LA 1.02 MK 1.06 NL 1.09 OV 0.99 ! PT 1.00 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.00* HN 1.02 KP 0.86 ! LA 0.82 MK 1.05 NL 1.09 OV 0.96 ! PT 0.97 SC 1.04 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.00* HN 0.97 KP 0.79 ! LA 0.93 MK 1.12 NL 1.05 OV 0.98 ! PT 1.05 SC 0.98 ! ! ! Fit before self-cal, rms=0.069347Jy sigma=0.000799 ! Fit after self-cal, rms=0.065252Jy sigma=0.000770 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.17 mas, bmaj=7.76 mas, bpa=14.87 degrees ! Estimated noise=736.299 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.5, 25.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00399385 Jy ! Component: 100 - total flux cleaned = 0.00617891 Jy ! Component: 150 - total flux cleaned = 0.00771879 Jy ! Component: 200 - total flux cleaned = 0.00859676 Jy ! Total flux subtracted in 200 components = 0.00859676 Jy ! Clean residual min=-0.002229 max=0.003184 Jy/beam ! Clean residual mean=0.000006 rms=0.000611 Jy/beam ! Combined flux in latest and established models = 0.195716 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 75 components and 0.195716 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064988Jy sigma=0.000766 ! Fit after self-cal, rms=0.064995Jy sigma=0.000766 ! Inverting map ! Added new window around map position (-28, 49.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00273972 Jy ! Component: 100 - total flux cleaned = 0.00400449 Jy ! Component: 150 - total flux cleaned = 0.00434635 Jy ! Component: 200 - total flux cleaned = 0.00442174 Jy ! Total flux subtracted in 200 components = 0.00442174 Jy ! Clean residual min=-0.001921 max=0.002062 Jy/beam ! Clean residual mean=0.000003 rms=0.000492 Jy/beam ! Combined flux in latest and established models = 0.200138 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 100 components and 0.200138 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064865Jy sigma=0.000765 ! Fit after self-cal, rms=0.064862Jy sigma=0.000765 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064862Jy sigma=0.000765 ! Fit after self-cal, rms=0.064867Jy sigma=0.000764 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.172 mas, bmaj=7.764 mas, bpa=14.94 degrees ! Estimated noise=735.263 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000986417 Jy ! Component: 100 - total flux cleaned = 0.00137574 Jy ! Component: 150 - total flux cleaned = 0.00159411 Jy ! Component: 200 - total flux cleaned = 0.00164335 Jy ! Total flux subtracted in 200 components = 0.00164335 Jy ! Clean residual min=-0.001709 max=0.002044 Jy/beam ! Clean residual mean=0.000002 rms=0.000450 Jy/beam ! Combined flux in latest and established models = 0.201781 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 118 components and 0.201781 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064837Jy sigma=0.000764 ! Fit after self-cal, rms=0.064840Jy sigma=0.000764 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-76.5, 71.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00190346 Jy ! Component: 100 - total flux cleaned = 0.00296527 Jy ! Component: 150 - total flux cleaned = 0.00360374 Jy ! Component: 200 - total flux cleaned = 0.00390979 Jy ! Total flux subtracted in 200 components = 0.00390979 Jy ! Clean residual min=-0.001510 max=0.001408 Jy/beam ! Clean residual mean=0.000003 rms=0.000380 Jy/beam ! Combined flux in latest and established models = 0.205691 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 142 components and 0.205691 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064771Jy sigma=0.000763 ! Fit after self-cal, rms=0.064766Jy sigma=0.000763 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064766Jy sigma=0.000763 ! Fit after self-cal, rms=0.064715Jy sigma=0.000763 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.172 mas, bmaj=7.766 mas, bpa=14.93 degrees ! Estimated noise=733.85 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000727388 Jy ! Component: 100 - total flux cleaned = 0.001241 Jy ! Component: 150 - total flux cleaned = 0.00155804 Jy ! Component: 200 - total flux cleaned = 0.00178491 Jy ! Total flux subtracted in 200 components = 0.00178491 Jy ! Clean residual min=-0.001434 max=0.001376 Jy/beam ! Clean residual mean=0.000003 rms=0.000357 Jy/beam ! Combined flux in latest and established models = 0.207476 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 158 components and 0.207476 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064694Jy sigma=0.000763 ! Fit after self-cal, rms=0.064695Jy sigma=0.000763 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000297492 Jy ! Component: 100 - total flux cleaned = 0.000527905 Jy ! Component: 150 - total flux cleaned = 0.00070639 Jy ! Component: 200 - total flux cleaned = 0.000857389 Jy ! Total flux subtracted in 200 components = 0.000857389 Jy ! Clean residual min=-0.001440 max=0.001363 Jy/beam ! Clean residual mean=0.000003 rms=0.000348 Jy/beam ! Combined flux in latest and established models = 0.208333 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 171 components and 0.208333 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064683Jy sigma=0.000763 ! Fit after self-cal, rms=0.064682Jy sigma=0.000763 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064682Jy sigma=0.000763 ! Fit after self-cal, rms=0.064685Jy sigma=0.000763 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.536 mas, bmaj=10.21 mas, bpa=2.842 degrees ! Estimated noise=935.782 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000616781 Jy ! Component: 100 - total flux cleaned = 0.00101862 Jy ! Component: 150 - total flux cleaned = 0.00126327 Jy ! Component: 200 - total flux cleaned = 0.00138736 Jy ! Total flux subtracted in 200 components = 0.00138736 Jy ! Clean residual min=-0.001127 max=0.001125 Jy/beam ! Clean residual mean=0.000003 rms=0.000327 Jy/beam ! Combined flux in latest and established models = 0.209721 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 199 components and 0.209721 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064679Jy sigma=0.000763 ! Fit after self-cal, rms=0.064680Jy sigma=0.000763 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000231224 Jy ! Component: 100 - total flux cleaned = 0.000333656 Jy ! Component: 150 - total flux cleaned = 0.000415114 Jy ! Component: 200 - total flux cleaned = 0.000458476 Jy ! Total flux subtracted in 200 components = 0.000458476 Jy ! Clean residual min=-0.001108 max=0.001073 Jy/beam ! Clean residual mean=0.000002 rms=0.000318 Jy/beam ! Combined flux in latest and established models = 0.210179 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 214 components and 0.210179 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064678Jy sigma=0.000763 ! Fit after self-cal, rms=0.064677Jy sigma=0.000763 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.172 mas, bmaj=7.766 mas, bpa=14.92 degrees ! Estimated noise=733.461 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.172 x 7.766 at 14.92 degrees (North through East) ! Clean map min=-0.0013205 max=0.16685 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.704 mas, bmaj=7.261 mas, bpa=15.1 degrees ! Estimated noise=942.859 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.127008 Jy ! Component: 100 - total flux cleaned = 0.155868 Jy ! Component: 150 - total flux cleaned = 0.16692 Jy ! Component: 200 - total flux cleaned = 0.172785 Jy ! Total flux subtracted in 200 components = 0.172785 Jy ! Clean residual min=-0.003163 max=0.003854 Jy/beam ! Clean residual mean=0.000008 rms=0.000877 Jy/beam ! Combined flux in latest and established models = 0.172785 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.172785 Jy ! Inverting map and beam ! Estimated beam: bmin=3.172 mas, bmaj=7.766 mas, bpa=14.92 degrees ! Estimated noise=733.461 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00595652 Jy ! Component: 100 - total flux cleaned = 0.0101193 Jy ! Component: 150 - total flux cleaned = 0.0133519 Jy ! Component: 200 - total flux cleaned = 0.0160541 Jy ! Total flux subtracted in 200 components = 0.0160541 Jy ! Clean residual min=-0.002187 max=0.002462 Jy/beam ! Clean residual mean=0.000009 rms=0.000669 Jy/beam ! Combined flux in latest and established models = 0.188839 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 58 components and 0.188839 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.536 mas, bmaj=10.21 mas, bpa=2.842 degrees ! Estimated noise=935.782 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0041874 Jy ! Component: 100 - total flux cleaned = 0.00702166 Jy ! Component: 150 - total flux cleaned = 0.0092599 Jy ! Component: 200 - total flux cleaned = 0.0110794 Jy ! Total flux subtracted in 200 components = 0.0110794 Jy ! Clean residual min=-0.001790 max=0.001903 Jy/beam ! Clean residual mean=0.000007 rms=0.000584 Jy/beam ! Combined flux in latest and established models = 0.199918 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0014965 Jy ! Component: 100 - total flux cleaned = 0.00275095 Jy ! Component: 150 - total flux cleaned = 0.00381488 Jy ! Component: 200 - total flux cleaned = 0.00472681 Jy ! Total flux subtracted in 200 components = 0.00472681 Jy ! Clean residual min=-0.001364 max=0.001458 Jy/beam ! Clean residual mean=0.000004 rms=0.000410 Jy/beam ! Combined flux in latest and established models = 0.204645 Jy ! Adding 81 model components to the UV plane model. ! The established model now contains 130 components and 0.204645 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.172 mas, bmaj=7.766 mas, bpa=14.92 degrees ! Estimated noise=733.461 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00116403 Jy ! Component: 100 - total flux cleaned = 0.00180135 Jy ! Component: 150 - total flux cleaned = 0.00230156 Jy ! Component: 200 - total flux cleaned = 0.00272905 Jy ! Total flux subtracted in 200 components = 0.00272905 Jy ! Clean residual min=-0.001548 max=0.001628 Jy/beam ! Clean residual mean=0.000003 rms=0.000386 Jy/beam ! Combined flux in latest and established models = 0.207374 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 158 components and 0.207374 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064764Jy sigma=0.000764 ! Fit after self-cal, rms=0.064754Jy sigma=0.000763 wmodel J1606+2717_S_2015_01_22_pus_map.mod ! Writing 158 model components to file: J1606+2717_S_2015_01_22_pus_map.mod wobs J1606+2717_S_2015_01_22_pus_uvs.fits ! Writing UV FITS file: J1606+2717_S_2015_01_22_pus_uvs.fits wwins J1606+2717_S_2015_01_22_pus_map.win ! wwins: Wrote 4 windows to J1606+2717_S_2015_01_22_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -9.94241e-06 Jy ! Component: 100 - total flux cleaned = 0.000219976 Jy ! Component: 150 - total flux cleaned = 0.000438045 Jy ! Component: 200 - total flux cleaned = 0.00064702 Jy ! Component: 250 - total flux cleaned = 0.000803347 Jy ! Component: 300 - total flux cleaned = 0.000910902 Jy ! Component: 350 - total flux cleaned = 0.000951741 Jy ! Component: 400 - total flux cleaned = 0.000911436 Jy ! Component: 450 - total flux cleaned = 0.000931185 Jy ! Component: 500 - total flux cleaned = 0.000911583 Jy ! Component: 550 - total flux cleaned = 0.000874008 Jy ! Component: 600 - total flux cleaned = 0.000818934 Jy ! Component: 650 - total flux cleaned = 0.000836911 Jy ! Component: 700 - total flux cleaned = 0.000819537 Jy ! Component: 750 - total flux cleaned = 0.000819938 Jy ! Component: 800 - total flux cleaned = 0.000819996 Jy ! Component: 850 - total flux cleaned = 0.000836483 Jy ! Component: 900 - total flux cleaned = 0.000836145 Jy ! Component: 950 - total flux cleaned = 0.000803584 Jy ! Component: 1000 - total flux cleaned = 0.000803231 Jy ! Component: 1050 - total flux cleaned = 0.000740641 Jy ! Component: 1100 - total flux cleaned = 0.00070974 Jy ! Component: 1150 - total flux cleaned = 0.000664498 Jy ! Component: 1200 - total flux cleaned = 0.000694495 Jy ! Component: 1250 - total flux cleaned = 0.000679901 Jy ! Component: 1300 - total flux cleaned = 0.000708897 Jy ! Component: 1350 - total flux cleaned = 0.000723264 Jy ! Component: 1400 - total flux cleaned = 0.000723275 Jy ! Component: 1450 - total flux cleaned = 0.000778811 Jy ! Component: 1500 - total flux cleaned = 0.000806004 Jy ! Component: 1550 - total flux cleaned = 0.000819537 Jy ! Component: 1600 - total flux cleaned = 0.000859527 Jy ! Component: 1650 - total flux cleaned = 0.000899148 Jy ! Component: 1700 - total flux cleaned = 0.000912257 Jy ! Component: 1750 - total flux cleaned = 0.000938124 Jy ! Component: 1800 - total flux cleaned = 0.00100182 Jy ! Component: 1850 - total flux cleaned = 0.00102698 Jy ! Component: 1900 - total flux cleaned = 0.00102702 Jy ! Component: 1950 - total flux cleaned = 0.00107623 Jy ! Component: 2000 - total flux cleaned = 0.00108851 Jy ! Component: 2050 - total flux cleaned = 0.00110054 Jy ! Component: 2100 - total flux cleaned = 0.0011602 Jy ! Component: 2150 - total flux cleaned = 0.00116014 Jy ! Component: 2200 - total flux cleaned = 0.00119506 Jy ! Component: 2250 - total flux cleaned = 0.00122958 Jy ! Component: 2300 - total flux cleaned = 0.00124106 Jy ! Component: 2350 - total flux cleaned = 0.00122954 Jy ! Component: 2400 - total flux cleaned = 0.0012408 Jy ! Component: 2450 - total flux cleaned = 0.00122954 Jy ! Component: 2500 - total flux cleaned = 0.00128478 Jy ! Component: 2550 - total flux cleaned = 0.00127374 Jy ! Component: 2600 - total flux cleaned = 0.00126281 Jy ! Component: 2650 - total flux cleaned = 0.00124124 Jy ! Component: 2700 - total flux cleaned = 0.00124119 Jy ! Component: 2750 - total flux cleaned = 0.00124121 Jy ! Component: 2800 - total flux cleaned = 0.00123063 Jy ! Component: 2850 - total flux cleaned = 0.00120964 Jy ! Component: 2900 - total flux cleaned = 0.00122009 Jy ! Component: 2950 - total flux cleaned = 0.00120972 Jy ! Component: 3000 - total flux cleaned = 0.00120966 Jy ! Component: 3050 - total flux cleaned = 0.00117892 Jy ! Component: 3100 - total flux cleaned = 0.00113832 Jy ! Component: 3150 - total flux cleaned = 0.00113827 Jy ! Component: 3200 - total flux cleaned = 0.0010781 Jy ! Component: 3250 - total flux cleaned = 0.00106811 Jy ! Component: 3300 - total flux cleaned = 0.00103833 Jy ! Component: 3350 - total flux cleaned = 0.00101856 Jy ! Component: 3400 - total flux cleaned = 0.000988931 Jy ! Component: 3450 - total flux cleaned = 0.000930164 Jy ! Component: 3500 - total flux cleaned = 0.0008912 Jy ! Component: 3550 - total flux cleaned = 0.000881459 Jy ! Component: 3600 - total flux cleaned = 0.000842859 Jy ! Component: 3650 - total flux cleaned = 0.000814085 Jy ! Component: 3700 - total flux cleaned = 0.000794981 Jy ! Component: 3750 - total flux cleaned = 0.0007664 Jy ! Component: 3800 - total flux cleaned = 0.000737962 Jy ! Component: 3850 - total flux cleaned = 0.000737961 Jy ! Component: 3900 - total flux cleaned = 0.000709736 Jy ! Component: 3950 - total flux cleaned = 0.000709741 Jy ! Component: 4000 - total flux cleaned = 0.000709687 Jy ! Component: 4050 - total flux cleaned = 0.000663187 Jy ! Total flux subtracted in 4096 components = 0.00065393 Jy ! Clean residual min=-0.000619 max=0.000547 Jy/beam ! Clean residual mean=0.000001 rms=0.000159 Jy/beam ! Combined flux in latest and established models = 0.208028 Jy keep ! Adding 231 model components to the UV plane model. ! The established model now contains 389 components and 0.208028 Jy ![Exited script file: muppet] wmap "J1606+2717_S_2015_01_22_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.172 x 7.766 at 14.92 degrees (North through East) ! Clean map min=-0.0010211 max=0.1669 Jy/beam ! Writing clean map to FITS file: J1606+2717_S_2015_01_22_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.166898 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000153725 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.27632 0.27632 0.552641 1.10528 2.21056 4.42113 8.84225 17.6845 35.369 70.738 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.166 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.172 x 7.766 at 14.92 degrees (North through East) ! Clean map min=-0.0010211 max=0.1669 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1606+2717_S_2015_01_22_pus_uvs.log closed on Tue Jan 3 22:58:36 2017