! Started logfile: J1604+1926_S_2015_01_22_pus_uvs.log on Tue Jan 3 22:58:18 2017 obs J1604+1926_S_2015_01_22_pus_uva.fits ! Reading UV FITS file: J1604+1926_S_2015_01_22_pus_uva.fits ! AN table 1: 54 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.622222 visibilities/baseline/integration-bin. ! Found source: J1604+1926 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 281 lines of history. ! ! Reading 6048 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1604+1926_S_2015_01_22_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 108 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 108 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 108 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 108 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.831360Jy sigma=0.010165 ! Fit after self-cal, rms=0.788379Jy sigma=0.009647 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.365 mas, bmaj=6.563 mas, bpa=7.364 degrees ! Estimated noise=1379.09 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.155962 Jy ! Component: 100 - total flux cleaned = 0.198531 Jy ! Total flux subtracted in 100 components = 0.198531 Jy ! Clean residual min=-0.013652 max=0.021170 Jy/beam ! Clean residual mean=0.000024 rms=0.004197 Jy/beam ! Combined flux in latest and established models = 0.198531 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.198531 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093917Jy sigma=0.000999 ! Fit after self-cal, rms=0.093891Jy sigma=0.000999 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.79 mas, bmaj=7.145 mas, bpa=6.893 degrees ! Estimated noise=760.395 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0319897 Jy ! Component: 100 - total flux cleaned = 0.0488475 Jy ! Component: 150 - total flux cleaned = 0.0586039 Jy ! Component: 200 - total flux cleaned = 0.0654968 Jy ! Total flux subtracted in 200 components = 0.0654968 Jy ! Clean residual min=-0.009712 max=0.011257 Jy/beam ! Clean residual mean=0.000014 rms=0.002454 Jy/beam ! Combined flux in latest and established models = 0.264028 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 34 components and 0.264028 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080711Jy sigma=0.000860 ! Fit after self-cal, rms=0.080670Jy sigma=0.000859 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00* HN 0.99 KP 0.97 ! LA 1.08 MK 1.08 NL 1.00* OV 1.00 ! PT 1.05 SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00* HN 1.04 KP 0.89 ! LA 1.05 MK 1.06 NL 1.00* OV 1.00 ! PT 1.06 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.00* HN 1.04 KP 0.88 ! LA 0.84 MK 1.06 NL 1.00* OV 0.94 ! PT 1.01 SC 1.05 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.00* HN 0.97 KP 0.83 ! LA 0.92 MK 1.05 NL 1.00* OV 1.00 ! PT 1.06 SC 1.00 ! ! ! Fit before self-cal, rms=0.080670Jy sigma=0.000859 ! Fit after self-cal, rms=0.074913Jy sigma=0.000817 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.836 mas, bmaj=7.222 mas, bpa=6.95 degrees ! Estimated noise=759.625 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-11.5, -6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00661172 Jy ! Component: 100 - total flux cleaned = 0.00772824 Jy ! Component: 150 - total flux cleaned = 0.00806486 Jy ! Component: 200 - total flux cleaned = 0.00798111 Jy ! Total flux subtracted in 200 components = 0.00798111 Jy ! Clean residual min=-0.003092 max=0.002698 Jy/beam ! Clean residual mean=0.000001 rms=0.000715 Jy/beam ! Combined flux in latest and established models = 0.272009 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 45 components and 0.272009 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074175Jy sigma=0.000809 ! Fit after self-cal, rms=0.074160Jy sigma=0.000809 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074160Jy sigma=0.000809 ! Fit after self-cal, rms=0.074426Jy sigma=0.000808 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.829 mas, bmaj=7.217 mas, bpa=6.881 degrees ! Estimated noise=761.575 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00133617 Jy ! Component: 100 - total flux cleaned = 0.0014683 Jy ! Component: 150 - total flux cleaned = 0.00159318 Jy ! Component: 200 - total flux cleaned = 0.00170434 Jy ! Total flux subtracted in 200 components = 0.00170434 Jy ! Clean residual min=-0.002816 max=0.002516 Jy/beam ! Clean residual mean=0.000001 rms=0.000671 Jy/beam ! Combined flux in latest and established models = 0.273714 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 53 components and 0.273714 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074269Jy sigma=0.000808 ! Fit after self-cal, rms=0.074269Jy sigma=0.000808 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000150768 Jy ! Component: 100 - total flux cleaned = 0.000242146 Jy ! Component: 150 - total flux cleaned = 0.000364225 Jy ! Component: 200 - total flux cleaned = 0.000400035 Jy ! Total flux subtracted in 200 components = 0.000400035 Jy ! Clean residual min=-0.002656 max=0.002353 Jy/beam ! Clean residual mean=0.000001 rms=0.000636 Jy/beam ! Combined flux in latest and established models = 0.274114 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 58 components and 0.274114 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074211Jy sigma=0.000807 ! Fit after self-cal, rms=0.074211Jy sigma=0.000807 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074211Jy sigma=0.000807 ! Fit after self-cal, rms=0.074918Jy sigma=0.000807 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.826 mas, bmaj=7.212 mas, bpa=6.911 degrees ! Estimated noise=766.645 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00167736 Jy ! Component: 100 - total flux cleaned = 0.001956 Jy ! Component: 150 - total flux cleaned = 0.0021244 Jy ! Component: 200 - total flux cleaned = 0.00225015 Jy ! Total flux subtracted in 200 components = 0.00225015 Jy ! Clean residual min=-0.002672 max=0.002320 Jy/beam ! Clean residual mean=0.000001 rms=0.000654 Jy/beam ! Combined flux in latest and established models = 0.276364 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 70 components and 0.276364 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074810Jy sigma=0.000807 ! Fit after self-cal, rms=0.074809Jy sigma=0.000807 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000151976 Jy ! Component: 100 - total flux cleaned = 0.000260208 Jy ! Component: 150 - total flux cleaned = 0.000363289 Jy ! Component: 200 - total flux cleaned = 0.000436691 Jy ! Total flux subtracted in 200 components = 0.000436691 Jy ! Clean residual min=-0.002569 max=0.002247 Jy/beam ! Clean residual mean=0.000001 rms=0.000636 Jy/beam ! Combined flux in latest and established models = 0.2768 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 76 components and 0.2768 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074783Jy sigma=0.000807 ! Fit after self-cal, rms=0.074783Jy sigma=0.000807 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074783Jy sigma=0.000807 ! Fit after self-cal, rms=0.075474Jy sigma=0.000807 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.201 mas, bmaj=9.754 mas, bpa=-0.5094 degrees ! Estimated noise=1082.79 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00267393 Jy ! Component: 100 - total flux cleaned = 0.00258145 Jy ! Component: 150 - total flux cleaned = 0.00237912 Jy ! Component: 200 - total flux cleaned = 0.00230868 Jy ! Total flux subtracted in 200 components = 0.00230868 Jy ! Clean residual min=-0.003812 max=0.002937 Jy/beam ! Clean residual mean=-0.000001 rms=0.001022 Jy/beam ! Combined flux in latest and established models = 0.279109 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 90 components and 0.279109 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075380Jy sigma=0.000807 ! Fit after self-cal, rms=0.075380Jy sigma=0.000807 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000575811 Jy ! Component: 100 - total flux cleaned = -0.000604308 Jy ! Component: 150 - total flux cleaned = -0.000630282 Jy ! Component: 200 - total flux cleaned = -0.000655019 Jy ! Total flux subtracted in 200 components = -0.000655019 Jy ! Clean residual min=-0.003686 max=0.002825 Jy/beam ! Clean residual mean=-0.000001 rms=0.000962 Jy/beam ! Combined flux in latest and established models = 0.278454 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 94 components and 0.278454 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075380Jy sigma=0.000807 ! Fit after self-cal, rms=0.075379Jy sigma=0.000807 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.825 mas, bmaj=7.206 mas, bpa=6.952 degrees ! Estimated noise=772.549 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.825 x 7.206 at 6.952 degrees (North through East) ! Clean map min=-0.0033776 max=0.21644 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.388 mas, bmaj=6.601 mas, bpa=7.485 degrees ! Estimated noise=1412.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.159646 Jy ! Component: 100 - total flux cleaned = 0.202149 Jy ! Component: 150 - total flux cleaned = 0.224863 Jy ! Component: 200 - total flux cleaned = 0.23911 Jy ! Total flux subtracted in 200 components = 0.23911 Jy ! Clean residual min=-0.006495 max=0.010990 Jy/beam ! Clean residual mean=0.000010 rms=0.002060 Jy/beam ! Combined flux in latest and established models = 0.23911 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.23911 Jy ! Inverting map and beam ! Estimated beam: bmin=2.825 mas, bmaj=7.206 mas, bpa=6.952 degrees ! Estimated noise=772.549 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.5, -2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0148576 Jy ! Component: 100 - total flux cleaned = 0.0230862 Jy ! Component: 150 - total flux cleaned = 0.028346 Jy ! Component: 200 - total flux cleaned = 0.0320719 Jy ! Total flux subtracted in 200 components = 0.0320719 Jy ! Clean residual min=-0.003437 max=0.003306 Jy/beam ! Clean residual mean=0.000005 rms=0.000946 Jy/beam ! Combined flux in latest and established models = 0.271182 Jy ! Adding 62 model components to the UV plane model. ! The established model now contains 80 components and 0.271182 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.201 mas, bmaj=9.754 mas, bpa=-0.5094 degrees ! Estimated noise=1082.79 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00439983 Jy ! Component: 100 - total flux cleaned = 0.00506117 Jy ! Component: 150 - total flux cleaned = 0.00542492 Jy ! Component: 200 - total flux cleaned = 0.00568703 Jy ! Total flux subtracted in 200 components = 0.00568703 Jy ! Clean residual min=-0.003879 max=0.002684 Jy/beam ! Clean residual mean=0.000002 rms=0.001063 Jy/beam ! Combined flux in latest and established models = 0.276869 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000122325 Jy ! Component: 100 - total flux cleaned = 0.000122665 Jy ! Component: 150 - total flux cleaned = 0.000123628 Jy ! Component: 200 - total flux cleaned = 0.000124094 Jy ! Total flux subtracted in 200 components = 0.000124094 Jy ! Clean residual min=-0.003817 max=0.002521 Jy/beam ! Clean residual mean=0.000001 rms=0.001006 Jy/beam ! Combined flux in latest and established models = 0.276993 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 117 components and 0.276993 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.825 mas, bmaj=7.206 mas, bpa=6.952 degrees ! Estimated noise=772.549 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.06634e-05 Jy ! Component: 100 - total flux cleaned = 6.09961e-05 Jy ! Component: 150 - total flux cleaned = -7.939e-05 Jy ! Component: 200 - total flux cleaned = -0.000122581 Jy ! Total flux subtracted in 200 components = -0.000122581 Jy ! Clean residual min=-0.003005 max=0.002427 Jy/beam ! Clean residual mean=0.000001 rms=0.000644 Jy/beam ! Combined flux in latest and established models = 0.27687 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 134 components and 0.27687 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075382Jy sigma=0.000807 ! Fit after self-cal, rms=0.075371Jy sigma=0.000807 wmodel J1604+1926_S_2015_01_22_pus_map.mod ! Writing 134 model components to file: J1604+1926_S_2015_01_22_pus_map.mod wobs J1604+1926_S_2015_01_22_pus_uvs.fits ! Writing UV FITS file: J1604+1926_S_2015_01_22_pus_uvs.fits wwins J1604+1926_S_2015_01_22_pus_map.win ! wwins: Wrote 3 windows to J1604+1926_S_2015_01_22_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00123664 Jy ! Component: 100 - total flux cleaned = -0.0019788 Jy ! Component: 150 - total flux cleaned = -0.00216352 Jy ! Component: 200 - total flux cleaned = -0.00216485 Jy ! Component: 250 - total flux cleaned = -0.00213279 Jy ! Component: 300 - total flux cleaned = -0.00210341 Jy ! Component: 350 - total flux cleaned = -0.00207502 Jy ! Component: 400 - total flux cleaned = -0.0019936 Jy ! Component: 450 - total flux cleaned = -0.001943 Jy ! Component: 500 - total flux cleaned = -0.00194273 Jy ! Component: 550 - total flux cleaned = -0.00184614 Jy ! Component: 600 - total flux cleaned = -0.00186908 Jy ! Component: 650 - total flux cleaned = -0.00191344 Jy ! Component: 700 - total flux cleaned = -0.00204455 Jy ! Component: 750 - total flux cleaned = -0.00217181 Jy ! Component: 800 - total flux cleaned = -0.00231663 Jy ! Component: 850 - total flux cleaned = -0.00245783 Jy ! Component: 900 - total flux cleaned = -0.00257553 Jy ! Component: 950 - total flux cleaned = -0.00263282 Jy ! Component: 1000 - total flux cleaned = -0.0027085 Jy ! Component: 1050 - total flux cleaned = -0.00285653 Jy ! Component: 1100 - total flux cleaned = -0.00294697 Jy ! Component: 1150 - total flux cleaned = -0.00298247 Jy ! Component: 1200 - total flux cleaned = -0.00298296 Jy ! Component: 1250 - total flux cleaned = -0.00308644 Jy ! Component: 1300 - total flux cleaned = -0.00313712 Jy ! Component: 1350 - total flux cleaned = -0.00315375 Jy ! Component: 1400 - total flux cleaned = -0.00318651 Jy ! Component: 1450 - total flux cleaned = -0.00320288 Jy ! Component: 1500 - total flux cleaned = -0.0032508 Jy ! Component: 1550 - total flux cleaned = -0.00326671 Jy ! Component: 1600 - total flux cleaned = -0.00328249 Jy ! Component: 1650 - total flux cleaned = -0.0033291 Jy ! Component: 1700 - total flux cleaned = -0.00335966 Jy ! Component: 1750 - total flux cleaned = -0.00338984 Jy ! Component: 1800 - total flux cleaned = -0.00340491 Jy ! Component: 1850 - total flux cleaned = -0.00343442 Jy ! Component: 1900 - total flux cleaned = -0.00342003 Jy ! Component: 1950 - total flux cleaned = -0.00343449 Jy ! Component: 2000 - total flux cleaned = -0.00346291 Jy ! Component: 2050 - total flux cleaned = -0.00346297 Jy ! Component: 2100 - total flux cleaned = -0.00349102 Jy ! Component: 2150 - total flux cleaned = -0.00349091 Jy ! Component: 2200 - total flux cleaned = -0.00350464 Jy ! Component: 2250 - total flux cleaned = -0.00351823 Jy ! Component: 2300 - total flux cleaned = -0.00350476 Jy ! Component: 2350 - total flux cleaned = -0.00353163 Jy ! Component: 2400 - total flux cleaned = -0.00354489 Jy ! Component: 2450 - total flux cleaned = -0.00353164 Jy ! Component: 2500 - total flux cleaned = -0.0035712 Jy ! Component: 2550 - total flux cleaned = -0.0035712 Jy ! Component: 2600 - total flux cleaned = -0.00357118 Jy ! Component: 2650 - total flux cleaned = -0.00358411 Jy ! Component: 2700 - total flux cleaned = -0.0035841 Jy ! Component: 2750 - total flux cleaned = -0.00354557 Jy ! Component: 2800 - total flux cleaned = -0.00353291 Jy ! Component: 2850 - total flux cleaned = -0.00354566 Jy ! Component: 2900 - total flux cleaned = -0.00353301 Jy ! Component: 2950 - total flux cleaned = -0.00353296 Jy ! Component: 3000 - total flux cleaned = -0.00352044 Jy ! Component: 3050 - total flux cleaned = -0.00347046 Jy ! Component: 3100 - total flux cleaned = -0.00345809 Jy ! Component: 3150 - total flux cleaned = -0.00347041 Jy ! Component: 3200 - total flux cleaned = -0.00343334 Jy ! Component: 3250 - total flux cleaned = -0.00342106 Jy ! Component: 3300 - total flux cleaned = -0.00340867 Jy ! Component: 3350 - total flux cleaned = -0.00337205 Jy ! Component: 3400 - total flux cleaned = -0.00335993 Jy ! Component: 3450 - total flux cleaned = -0.0033478 Jy ! Component: 3500 - total flux cleaned = -0.00331138 Jy ! Component: 3550 - total flux cleaned = -0.00329925 Jy ! Component: 3600 - total flux cleaned = -0.00326293 Jy ! Component: 3650 - total flux cleaned = -0.00323873 Jy ! Component: 3700 - total flux cleaned = -0.00320253 Jy ! Component: 3750 - total flux cleaned = -0.00320252 Jy ! Component: 3800 - total flux cleaned = -0.00319048 Jy ! Component: 3850 - total flux cleaned = -0.00317841 Jy ! Component: 3900 - total flux cleaned = -0.00315422 Jy ! Component: 3950 - total flux cleaned = -0.00313012 Jy ! Component: 4000 - total flux cleaned = -0.00314222 Jy ! Component: 4050 - total flux cleaned = -0.00314221 Jy ! Total flux subtracted in 4096 components = -0.00311802 Jy ! Clean residual min=-0.000731 max=0.000765 Jy/beam ! Clean residual mean=0.000000 rms=0.000204 Jy/beam ! Combined flux in latest and established models = 0.273752 Jy keep ! Adding 240 model components to the UV plane model. ! The established model now contains 374 components and 0.273752 Jy ![Exited script file: muppet] wmap "J1604+1926_S_2015_01_22_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.825 x 7.206 at 6.952 degrees (North through East) ! Clean map min=-0.0019764 max=0.21641 Jy/beam ! Writing clean map to FITS file: J1604+1926_S_2015_01_22_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.216411 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000190145 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.263589 0.263589 0.527178 1.05436 2.10871 4.21742 8.43484 16.8697 33.7394 67.4787 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.216 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.825 x 7.206 at 6.952 degrees (North through East) ! Clean map min=-0.0019764 max=0.21641 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1604+1926_S_2015_01_22_pus_uvs.log closed on Tue Jan 3 22:58:23 2017