! Started logfile: J1558+5625_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:31:02 2017 obs J1558+5625_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J1558+5625_S_2014_01_04_pus_uva.fits ! AN table 1: 76 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.527778 visibilities/baseline/integration-bin. ! Found source: J1558+5625 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 5776 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1558+5625_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 190 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 190 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 190 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 190 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.885902Jy sigma=0.012283 ! Fit after self-cal, rms=0.862628Jy sigma=0.011927 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.92 mas, bmaj=4.867 mas, bpa=60.02 degrees ! Estimated noise=1322.42 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.103798 Jy ! Component: 100 - total flux cleaned = 0.131375 Jy ! Total flux subtracted in 100 components = 0.131375 Jy ! Clean residual min=-0.007427 max=0.011142 Jy/beam ! Clean residual mean=-0.000077 rms=0.002079 Jy/beam ! Combined flux in latest and established models = 0.131375 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.131375 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077095Jy sigma=0.000945 ! Fit after self-cal, rms=0.077014Jy sigma=0.000944 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.67 mas, bmaj=5.957 mas, bpa=62.19 degrees ! Estimated noise=717.074 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0184174 Jy ! Component: 100 - total flux cleaned = 0.0275104 Jy ! Component: 150 - total flux cleaned = 0.0331518 Jy ! Component: 200 - total flux cleaned = 0.0368856 Jy ! Total flux subtracted in 200 components = 0.0368856 Jy ! Clean residual min=-0.004979 max=0.004549 Jy/beam ! Clean residual mean=-0.000064 rms=0.001290 Jy/beam ! Combined flux in latest and established models = 0.168261 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 42 components and 0.168261 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072456Jy sigma=0.000884 ! Fit after self-cal, rms=0.072437Jy sigma=0.000884 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.82 KP 1.00* LA 1.00 ! MK 0.99 NL 0.98 OV 0.95 PT 1.00 ! SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.99 KP 1.00* LA 0.98 ! MK 1.00 NL 1.03 OV 0.98 PT 0.97 ! SC 0.96 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.14 KP 1.00* LA 0.83 ! MK 1.02 NL 0.97 OV 0.93 PT 0.92 ! SC 1.04 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.19 FD 0.99 KP 1.00* LA 0.90 ! MK 1.02 NL 1.07 OV 1.01 PT 0.95 ! SC 0.93 ! ! ! Fit before self-cal, rms=0.072437Jy sigma=0.000884 ! Fit after self-cal, rms=0.068170Jy sigma=0.000854 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.674 mas, bmaj=6 mas, bpa=61.34 degrees ! Estimated noise=710.959 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000525531 Jy ! Component: 100 - total flux cleaned = 0.000193225 Jy ! Component: 150 - total flux cleaned = 8.88185e-05 Jy ! Component: 200 - total flux cleaned = 3.05121e-05 Jy ! Total flux subtracted in 200 components = 3.05121e-05 Jy ! Clean residual min=-0.003066 max=0.002777 Jy/beam ! Clean residual mean=-0.000007 rms=0.000725 Jy/beam ! Combined flux in latest and established models = 0.168291 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 51 components and 0.168291 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068092Jy sigma=0.000853 ! Fit after self-cal, rms=0.067773Jy sigma=0.000853 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067773Jy sigma=0.000853 ! Fit after self-cal, rms=0.067806Jy sigma=0.000849 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.657 mas, bmaj=5.977 mas, bpa=61.43 degrees ! Estimated noise=712.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.9161e-05 Jy ! Component: 100 - total flux cleaned = 4.44502e-05 Jy ! Component: 150 - total flux cleaned = 4.69244e-05 Jy ! Component: 200 - total flux cleaned = -3.63232e-05 Jy ! Total flux subtracted in 200 components = -3.63232e-05 Jy ! Clean residual min=-0.002468 max=0.002862 Jy/beam ! Clean residual mean=0.000006 rms=0.000601 Jy/beam ! Combined flux in latest and established models = 0.168255 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 57 components and 0.168255 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067760Jy sigma=0.000849 ! Fit after self-cal, rms=0.067725Jy sigma=0.000849 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-94, 68). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00196871 Jy ! Component: 100 - total flux cleaned = 0.00244405 Jy ! Component: 150 - total flux cleaned = 0.00256152 Jy ! Component: 200 - total flux cleaned = 0.00262345 Jy ! Total flux subtracted in 200 components = 0.00262345 Jy ! Clean residual min=-0.002220 max=0.001971 Jy/beam ! Clean residual mean=0.000000 rms=0.000525 Jy/beam ! Combined flux in latest and established models = 0.170879 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 69 components and 0.170879 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067628Jy sigma=0.000848 ! Fit after self-cal, rms=0.067616Jy sigma=0.000848 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067616Jy sigma=0.000848 ! Fit after self-cal, rms=0.067372Jy sigma=0.000847 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.648 mas, bmaj=5.96 mas, bpa=61.47 degrees ! Estimated noise=710.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000134591 Jy ! Component: 100 - total flux cleaned = 0.000169261 Jy ! Component: 150 - total flux cleaned = 0.000224503 Jy ! Component: 200 - total flux cleaned = 0.000248816 Jy ! Total flux subtracted in 200 components = 0.000248816 Jy ! Clean residual min=-0.002042 max=0.001999 Jy/beam ! Clean residual mean=0.000003 rms=0.000495 Jy/beam ! Combined flux in latest and established models = 0.171127 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 76 components and 0.171127 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067339Jy sigma=0.000847 ! Fit after self-cal, rms=0.067329Jy sigma=0.000847 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.16595e-05 Jy ! Component: 100 - total flux cleaned = -3.31415e-05 Jy ! Component: 150 - total flux cleaned = 7.86886e-06 Jy ! Component: 200 - total flux cleaned = 6.91281e-06 Jy ! Total flux subtracted in 200 components = 6.91281e-06 Jy ! Clean residual min=-0.002045 max=0.002015 Jy/beam ! Clean residual mean=0.000003 rms=0.000487 Jy/beam ! Combined flux in latest and established models = 0.171134 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 83 components and 0.171134 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067311Jy sigma=0.000847 ! Fit after self-cal, rms=0.067308Jy sigma=0.000847 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067308Jy sigma=0.000847 ! Fit after self-cal, rms=0.067210Jy sigma=0.000847 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.472 mas, bmaj=10.54 mas, bpa=72.07 degrees ! Estimated noise=829.205 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.93398e-05 Jy ! Component: 100 - total flux cleaned = 8.86449e-05 Jy ! Component: 150 - total flux cleaned = 0.000113271 Jy ! Component: 200 - total flux cleaned = 0.000112602 Jy ! Total flux subtracted in 200 components = 0.000112602 Jy ! Clean residual min=-0.002225 max=0.001756 Jy/beam ! Clean residual mean=0.000004 rms=0.000542 Jy/beam ! Combined flux in latest and established models = 0.171247 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 98 components and 0.171247 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067203Jy sigma=0.000847 ! Fit after self-cal, rms=0.067200Jy sigma=0.000847 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000100525 Jy ! Component: 100 - total flux cleaned = -9.92946e-05 Jy ! Component: 150 - total flux cleaned = -8.96013e-05 Jy ! Component: 200 - total flux cleaned = -8.09694e-05 Jy ! Total flux subtracted in 200 components = -8.09694e-05 Jy ! Clean residual min=-0.002222 max=0.001721 Jy/beam ! Clean residual mean=0.000003 rms=0.000538 Jy/beam ! Combined flux in latest and established models = 0.171166 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 103 components and 0.171166 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067196Jy sigma=0.000847 ! Fit after self-cal, rms=0.067194Jy sigma=0.000847 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.645 mas, bmaj=5.948 mas, bpa=61.56 degrees ! Estimated noise=710.352 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.645 x 5.948 at 61.56 degrees (North through East) ! Clean map min=-0.0021104 max=0.13552 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.894 mas, bmaj=4.833 mas, bpa=59.46 degrees ! Estimated noise=1312.43 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.102843 Jy ! Component: 100 - total flux cleaned = 0.13224 Jy ! Component: 150 - total flux cleaned = 0.145938 Jy ! Component: 200 - total flux cleaned = 0.153938 Jy ! Total flux subtracted in 200 components = 0.153938 Jy ! Clean residual min=-0.003937 max=0.005201 Jy/beam ! Clean residual mean=-0.000018 rms=0.000989 Jy/beam ! Combined flux in latest and established models = 0.153938 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.153938 Jy ! Inverting map and beam ! Estimated beam: bmin=3.645 mas, bmaj=5.948 mas, bpa=61.56 degrees ! Estimated noise=710.352 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00661767 Jy ! Component: 100 - total flux cleaned = 0.0101649 Jy ! Component: 150 - total flux cleaned = 0.0114129 Jy ! Component: 200 - total flux cleaned = 0.0123916 Jy ! Total flux subtracted in 200 components = 0.0123916 Jy ! Clean residual min=-0.002249 max=0.001736 Jy/beam ! Clean residual mean=-0.000005 rms=0.000523 Jy/beam ! Combined flux in latest and established models = 0.166329 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 37 components and 0.166329 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.472 mas, bmaj=10.54 mas, bpa=72.07 degrees ! Estimated noise=829.205 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00191341 Jy ! Component: 100 - total flux cleaned = 0.00315851 Jy ! Component: 150 - total flux cleaned = 0.00390616 Jy ! Component: 200 - total flux cleaned = 0.00437995 Jy ! Total flux subtracted in 200 components = 0.00437995 Jy ! Clean residual min=-0.002044 max=0.001722 Jy/beam ! Clean residual mean=0.000010 rms=0.000518 Jy/beam ! Combined flux in latest and established models = 0.170709 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000291236 Jy ! Component: 100 - total flux cleaned = 0.000393537 Jy ! Component: 150 - total flux cleaned = 0.000483313 Jy ! Component: 200 - total flux cleaned = 0.00056227 Jy ! Total flux subtracted in 200 components = 0.00056227 Jy ! Clean residual min=-0.001903 max=0.001738 Jy/beam ! Clean residual mean=0.000014 rms=0.000509 Jy/beam ! Combined flux in latest and established models = 0.171271 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 80 components and 0.171271 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.645 mas, bmaj=5.948 mas, bpa=61.56 degrees ! Estimated noise=710.352 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000189442 Jy ! Component: 100 - total flux cleaned = -0.000122396 Jy ! Component: 150 - total flux cleaned = -8.51787e-06 Jy ! Component: 200 - total flux cleaned = 9.57609e-05 Jy ! Total flux subtracted in 200 components = 9.57609e-05 Jy ! Clean residual min=-0.001886 max=0.001909 Jy/beam ! Clean residual mean=0.000009 rms=0.000450 Jy/beam ! Combined flux in latest and established models = 0.171367 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 96 components and 0.171367 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067175Jy sigma=0.000846 ! Fit after self-cal, rms=0.067181Jy sigma=0.000846 wmodel J1558+5625_S_2014_01_04_pus_map.mod ! Writing 96 model components to file: J1558+5625_S_2014_01_04_pus_map.mod wobs J1558+5625_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J1558+5625_S_2014_01_04_pus_uvs.fits wwins J1558+5625_S_2014_01_04_pus_map.win ! wwins: Wrote 3 windows to J1558+5625_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00037747 Jy ! Component: 100 - total flux cleaned = -0.000408371 Jy ! Component: 150 - total flux cleaned = -0.000380477 Jy ! Component: 200 - total flux cleaned = -0.000272763 Jy ! Component: 250 - total flux cleaned = -0.000221797 Jy ! Component: 300 - total flux cleaned = -0.000196565 Jy ! Component: 350 - total flux cleaned = -7.78196e-05 Jy ! Component: 400 - total flux cleaned = 3.6571e-05 Jy ! Component: 450 - total flux cleaned = 5.83152e-05 Jy ! Component: 500 - total flux cleaned = 0.000100673 Jy ! Component: 550 - total flux cleaned = 0.000100805 Jy ! Component: 600 - total flux cleaned = 4.06948e-05 Jy ! Component: 650 - total flux cleaned = 1.76047e-06 Jy ! Component: 700 - total flux cleaned = -7.49609e-05 Jy ! Component: 750 - total flux cleaned = -0.00014988 Jy ! Component: 800 - total flux cleaned = -0.000277344 Jy ! Component: 850 - total flux cleaned = -0.000348753 Jy ! Component: 900 - total flux cleaned = -0.000366147 Jy ! Component: 950 - total flux cleaned = -0.000434289 Jy ! Component: 1000 - total flux cleaned = -0.000450889 Jy ! Component: 1050 - total flux cleaned = -0.000434691 Jy ! Component: 1100 - total flux cleaned = -0.000418562 Jy ! Component: 1150 - total flux cleaned = -0.000434558 Jy ! Component: 1200 - total flux cleaned = -0.000434583 Jy ! Component: 1250 - total flux cleaned = -0.000404027 Jy ! Component: 1300 - total flux cleaned = -0.000403764 Jy ! Component: 1350 - total flux cleaned = -0.000403461 Jy ! Component: 1400 - total flux cleaned = -0.000359094 Jy ! Component: 1450 - total flux cleaned = -0.000344579 Jy ! Component: 1500 - total flux cleaned = -0.000373191 Jy ! Component: 1550 - total flux cleaned = -0.000387315 Jy ! Component: 1600 - total flux cleaned = -0.00037333 Jy ! Component: 1650 - total flux cleaned = -0.000373482 Jy ! Component: 1700 - total flux cleaned = -0.000373796 Jy ! Component: 1750 - total flux cleaned = -0.000305979 Jy ! Component: 1800 - total flux cleaned = -0.00027879 Jy ! Component: 1850 - total flux cleaned = -0.000199164 Jy ! Component: 1900 - total flux cleaned = -0.000173002 Jy ! Component: 1950 - total flux cleaned = -0.000146897 Jy ! Component: 2000 - total flux cleaned = -8.24711e-05 Jy ! Component: 2050 - total flux cleaned = -6.97837e-05 Jy ! Component: 2100 - total flux cleaned = -3.16614e-05 Jy ! Component: 2150 - total flux cleaned = 5.63478e-05 Jy ! Component: 2200 - total flux cleaned = 0.000106191 Jy ! Component: 2250 - total flux cleaned = 0.000155537 Jy ! Component: 2300 - total flux cleaned = 0.000204543 Jy ! Component: 2350 - total flux cleaned = 0.000240915 Jy ! Component: 2400 - total flux cleaned = 0.000289161 Jy ! Component: 2450 - total flux cleaned = 0.000348943 Jy ! Component: 2500 - total flux cleaned = 0.000384488 Jy ! Component: 2550 - total flux cleaned = 0.00045515 Jy ! Component: 2600 - total flux cleaned = 0.000478612 Jy ! Component: 2650 - total flux cleaned = 0.000501893 Jy ! Component: 2700 - total flux cleaned = 0.000548047 Jy ! Component: 2750 - total flux cleaned = 0.000525096 Jy ! Component: 2800 - total flux cleaned = 0.000582204 Jy ! Component: 2850 - total flux cleaned = 0.000627579 Jy ! Component: 2900 - total flux cleaned = 0.000661365 Jy ! Component: 2950 - total flux cleaned = 0.000706207 Jy ! Component: 3000 - total flux cleaned = 0.000739574 Jy ! Component: 3050 - total flux cleaned = 0.000750587 Jy ! Component: 3100 - total flux cleaned = 0.000794664 Jy ! Component: 3150 - total flux cleaned = 0.000838491 Jy ! Component: 3200 - total flux cleaned = 0.000892955 Jy ! Component: 3250 - total flux cleaned = 0.000914594 Jy ! Component: 3300 - total flux cleaned = 0.000946975 Jy ! Component: 3350 - total flux cleaned = 0.000989903 Jy ! Component: 3400 - total flux cleaned = 0.0010219 Jy ! Component: 3450 - total flux cleaned = 0.00106437 Jy ! Component: 3500 - total flux cleaned = 0.00106442 Jy ! Component: 3550 - total flux cleaned = 0.00108548 Jy ! Component: 3600 - total flux cleaned = 0.00114844 Jy ! Component: 3650 - total flux cleaned = 0.00113796 Jy ! Component: 3700 - total flux cleaned = 0.00116917 Jy ! Component: 3750 - total flux cleaned = 0.00118991 Jy ! Component: 3800 - total flux cleaned = 0.00123111 Jy ! Component: 3850 - total flux cleaned = 0.0012414 Jy ! Component: 3900 - total flux cleaned = 0.00126194 Jy ! Component: 3950 - total flux cleaned = 0.00126195 Jy ! Component: 4000 - total flux cleaned = 0.00130248 Jy ! Component: 4050 - total flux cleaned = 0.00136307 Jy ! Total flux subtracted in 4096 components = 0.00135298 Jy ! Clean residual min=-0.000706 max=0.000561 Jy/beam ! Clean residual mean=0.000003 rms=0.000175 Jy/beam ! Combined flux in latest and established models = 0.17272 Jy keep ! Adding 236 model components to the UV plane model. ! The established model now contains 332 components and 0.17272 Jy ![Exited script file: muppet] wmap "J1558+5625_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.645 x 5.948 at 61.56 degrees (North through East) ! Clean map min=-0.0016094 max=0.13576 Jy/beam ! Writing clean map to FITS file: J1558+5625_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.135762 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000174177 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.384889 0.384889 0.769778 1.53956 3.07911 6.15822 12.3164 24.6329 49.2658 98.5316 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.135 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.645 x 5.948 at 61.56 degrees (North through East) ! Clean map min=-0.0016094 max=0.13576 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1558+5625_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:31:06 2017