! Started logfile: J1557+4522_S_2015_01_22_pus_uvs.log on Tue Jan 3 22:58:09 2017 obs J1557+4522_S_2015_01_22_pus_uva.fits ! Reading UV FITS file: J1557+4522_S_2015_01_22_pus_uva.fits ! AN table 1: 63 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.8 visibilities/baseline/integration-bin. ! Found source: J1557+4522 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 281 lines of history. ! ! Reading 9072 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1557+4522_S_2015_01_22_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 125 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 94 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 94 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 94 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.963364Jy sigma=0.012953 ! Fit after self-cal, rms=0.951950Jy sigma=0.012819 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.373 mas, bmaj=8.379 mas, bpa=15.43 degrees ! Estimated noise=1198.78 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.037939 Jy ! Component: 100 - total flux cleaned = 0.0464755 Jy ! Total flux subtracted in 100 components = 0.0464755 Jy ! Clean residual min=-0.004706 max=0.004404 Jy/beam ! Clean residual mean=0.000004 rms=0.001186 Jy/beam ! Combined flux in latest and established models = 0.0464755 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.0464755 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061937Jy sigma=0.000762 ! Fit after self-cal, rms=0.061912Jy sigma=0.000761 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.106 mas, bmaj=8.626 mas, bpa=14.04 degrees ! Estimated noise=602.963 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00399816 Jy ! Component: 100 - total flux cleaned = 0.00589732 Jy ! Component: 150 - total flux cleaned = 0.00655055 Jy ! Component: 200 - total flux cleaned = 0.00687029 Jy ! Total flux subtracted in 200 components = 0.00687029 Jy ! Clean residual min=-0.001957 max=0.001970 Jy/beam ! Clean residual mean=0.000004 rms=0.000555 Jy/beam ! Combined flux in latest and established models = 0.0533458 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 17 components and 0.0533458 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061643Jy sigma=0.000758 ! Fit after self-cal, rms=0.061628Jy sigma=0.000758 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00* HN 0.95 KP 1.05 ! LA 1.11 MK 1.06 NL 1.08 OV 0.93 ! PT 1.02 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00* HN 1.05 KP 1.01 ! LA 1.00 MK 0.95 NL 1.03 OV 1.01 ! PT 1.03 SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.00* HN 0.96 KP 0.87 ! LA 0.90 MK 1.14 NL 1.04 OV 0.94 ! PT 1.00 SC 1.06 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00* HN 1.00 KP 0.80 ! LA 0.89 MK 1.07 NL 1.02 OV 1.04 ! PT 1.08 SC 0.95 ! ! ! Fit before self-cal, rms=0.061628Jy sigma=0.000758 ! Fit after self-cal, rms=0.060329Jy sigma=0.000755 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.129 mas, bmaj=8.595 mas, bpa=14.11 degrees ! Estimated noise=598.677 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000629627 Jy ! Component: 100 - total flux cleaned = 0.000614471 Jy ! Component: 150 - total flux cleaned = 0.000600936 Jy ! Component: 200 - total flux cleaned = 0.000565506 Jy ! Total flux subtracted in 200 components = 0.000565506 Jy ! Clean residual min=-0.001830 max=0.001648 Jy/beam ! Clean residual mean=-0.000000 rms=0.000449 Jy/beam ! Combined flux in latest and established models = 0.0539113 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 29 components and 0.0539113 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060316Jy sigma=0.000755 ! Fit after self-cal, rms=0.060328Jy sigma=0.000755 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060328Jy sigma=0.000755 ! Fit after self-cal, rms=0.060559Jy sigma=0.000755 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.13 mas, bmaj=8.584 mas, bpa=14.09 degrees ! Estimated noise=599.696 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00032574 Jy ! Component: 100 - total flux cleaned = 0.000351472 Jy ! Component: 150 - total flux cleaned = 0.000351871 Jy ! Component: 200 - total flux cleaned = 0.000342811 Jy ! Total flux subtracted in 200 components = 0.000342811 Jy ! Clean residual min=-0.001808 max=0.001697 Jy/beam ! Clean residual mean=-0.000001 rms=0.000443 Jy/beam ! Combined flux in latest and established models = 0.0542542 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 31 components and 0.0542542 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060554Jy sigma=0.000755 ! Fit after self-cal, rms=0.060559Jy sigma=0.000755 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.54929e-05 Jy ! Component: 100 - total flux cleaned = 2.55794e-05 Jy ! Component: 150 - total flux cleaned = 8.61652e-06 Jy ! Component: 200 - total flux cleaned = 1.15051e-06 Jy ! Total flux subtracted in 200 components = 1.15051e-06 Jy ! Clean residual min=-0.001768 max=0.001723 Jy/beam ! Clean residual mean=-0.000001 rms=0.000442 Jy/beam ! Combined flux in latest and established models = 0.0542553 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 35 components and 0.0542553 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060556Jy sigma=0.000754 ! Fit after self-cal, rms=0.060556Jy sigma=0.000754 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060556Jy sigma=0.000754 ! Fit after self-cal, rms=0.060622Jy sigma=0.000754 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.128 mas, bmaj=8.579 mas, bpa=14.06 degrees ! Estimated noise=599.933 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000150931 Jy ! Component: 100 - total flux cleaned = 0.000159498 Jy ! Component: 150 - total flux cleaned = 0.000159263 Jy ! Component: 200 - total flux cleaned = 0.000159435 Jy ! Total flux subtracted in 200 components = 0.000159435 Jy ! Clean residual min=-0.001755 max=0.001735 Jy/beam ! Clean residual mean=-0.000001 rms=0.000438 Jy/beam ! Combined flux in latest and established models = 0.0544147 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 39 components and 0.0544147 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060620Jy sigma=0.000754 ! Fit after self-cal, rms=0.060622Jy sigma=0.000754 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.76191e-06 Jy ! Component: 100 - total flux cleaned = -1.18882e-05 Jy ! Component: 150 - total flux cleaned = -1.16588e-05 Jy ! Component: 200 - total flux cleaned = -1.78046e-05 Jy ! Total flux subtracted in 200 components = -1.78046e-05 Jy ! Clean residual min=-0.001730 max=0.001742 Jy/beam ! Clean residual mean=-0.000001 rms=0.000437 Jy/beam ! Combined flux in latest and established models = 0.0543969 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 39 components and 0.0543969 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060620Jy sigma=0.000754 ! Fit after self-cal, rms=0.060620Jy sigma=0.000754 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060620Jy sigma=0.000754 ! Fit after self-cal, rms=0.060624Jy sigma=0.000754 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.704 mas, bmaj=9.975 mas, bpa=8.459 degrees ! Estimated noise=771.394 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.47162e-05 Jy ! Component: 100 - total flux cleaned = 5.54274e-05 Jy ! Component: 150 - total flux cleaned = 5.89406e-05 Jy ! Component: 200 - total flux cleaned = 2.62011e-05 Jy ! Total flux subtracted in 200 components = 2.62011e-05 Jy ! Clean residual min=-0.001846 max=0.001614 Jy/beam ! Clean residual mean=-0.000001 rms=0.000537 Jy/beam ! Combined flux in latest and established models = 0.0544231 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 48 components and 0.0544231 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060636Jy sigma=0.000754 ! Fit after self-cal, rms=0.060638Jy sigma=0.000754 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.32575e-05 Jy ! Component: 100 - total flux cleaned = -1.08588e-05 Jy ! Component: 150 - total flux cleaned = -3.1233e-05 Jy ! Component: 200 - total flux cleaned = -3.95002e-05 Jy ! Total flux subtracted in 200 components = -3.95002e-05 Jy ! Clean residual min=-0.001842 max=0.001596 Jy/beam ! Clean residual mean=-0.000001 rms=0.000531 Jy/beam ! Combined flux in latest and established models = 0.0543836 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 56 components and 0.0543836 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060643Jy sigma=0.000754 ! Fit after self-cal, rms=0.060643Jy sigma=0.000754 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.126 mas, bmaj=8.578 mas, bpa=14.03 degrees ! Estimated noise=599.858 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.126 x 8.578 at 14.03 degrees (North through East) ! Clean map min=-0.0016358 max=0.04915 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.388 mas, bmaj=8.324 mas, bpa=15.57 degrees ! Estimated noise=1203.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0375565 Jy ! Component: 100 - total flux cleaned = 0.0471632 Jy ! Component: 150 - total flux cleaned = 0.0508816 Jy ! Component: 200 - total flux cleaned = 0.0515095 Jy ! Total flux subtracted in 200 components = 0.0515095 Jy ! Clean residual min=-0.003948 max=0.004337 Jy/beam ! Clean residual mean=-0.000000 rms=0.001139 Jy/beam ! Combined flux in latest and established models = 0.0515095 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.0515095 Jy ! Inverting map and beam ! Estimated beam: bmin=3.126 mas, bmaj=8.578 mas, bpa=14.03 degrees ! Estimated noise=599.858 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00162051 Jy ! Component: 100 - total flux cleaned = 0.00243427 Jy ! Component: 150 - total flux cleaned = 0.00258511 Jy ! Component: 200 - total flux cleaned = 0.00262499 Jy ! Total flux subtracted in 200 components = 0.00262499 Jy ! Clean residual min=-0.001829 max=0.001559 Jy/beam ! Clean residual mean=-0.000000 rms=0.000451 Jy/beam ! Combined flux in latest and established models = 0.0541345 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 33 components and 0.0541345 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.704 mas, bmaj=9.975 mas, bpa=8.459 degrees ! Estimated noise=771.394 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000170585 Jy ! Component: 100 - total flux cleaned = 0.000194139 Jy ! Component: 150 - total flux cleaned = 0.000210731 Jy ! Component: 200 - total flux cleaned = 0.000210412 Jy ! Total flux subtracted in 200 components = 0.000210412 Jy ! Clean residual min=-0.001948 max=0.001646 Jy/beam ! Clean residual mean=-0.000001 rms=0.000544 Jy/beam ! Combined flux in latest and established models = 0.0543449 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.36323e-05 Jy ! Component: 100 - total flux cleaned = 2.48144e-05 Jy ! Component: 150 - total flux cleaned = 2.47693e-05 Jy ! Component: 200 - total flux cleaned = 3.40897e-05 Jy ! Total flux subtracted in 200 components = 3.40897e-05 Jy ! Clean residual min=-0.001865 max=0.001610 Jy/beam ! Clean residual mean=-0.000001 rms=0.000532 Jy/beam ! Combined flux in latest and established models = 0.054379 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 43 components and 0.054379 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.126 mas, bmaj=8.578 mas, bpa=14.03 degrees ! Estimated noise=599.858 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000155246 Jy ! Component: 100 - total flux cleaned = -6.83219e-05 Jy ! Component: 150 - total flux cleaned = -3.54225e-05 Jy ! Component: 200 - total flux cleaned = -2.29852e-05 Jy ! Total flux subtracted in 200 components = -2.29852e-05 Jy ! Clean residual min=-0.001720 max=0.001635 Jy/beam ! Clean residual mean=-0.000000 rms=0.000433 Jy/beam ! Combined flux in latest and established models = 0.054356 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 54 components and 0.054356 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060639Jy sigma=0.000754 ! Fit after self-cal, rms=0.060633Jy sigma=0.000754 wmodel J1557+4522_S_2015_01_22_pus_map.mod ! Writing 54 model components to file: J1557+4522_S_2015_01_22_pus_map.mod wobs J1557+4522_S_2015_01_22_pus_uvs.fits ! Writing UV FITS file: J1557+4522_S_2015_01_22_pus_uvs.fits wwins J1557+4522_S_2015_01_22_pus_map.win ! wwins: Wrote 1 windows to J1557+4522_S_2015_01_22_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000337374 Jy ! Component: 100 - total flux cleaned = -0.000611324 Jy ! Component: 150 - total flux cleaned = -0.000866879 Jy ! Component: 200 - total flux cleaned = -0.00115815 Jy ! Component: 250 - total flux cleaned = -0.0013889 Jy ! Component: 300 - total flux cleaned = -0.00163194 Jy ! Component: 350 - total flux cleaned = -0.00182367 Jy ! Component: 400 - total flux cleaned = -0.00196694 Jy ! Component: 450 - total flux cleaned = -0.00206614 Jy ! Component: 500 - total flux cleaned = -0.00216202 Jy ! Component: 550 - total flux cleaned = -0.00223628 Jy ! Component: 600 - total flux cleaned = -0.00227302 Jy ! Component: 650 - total flux cleaned = -0.00229088 Jy ! Component: 700 - total flux cleaned = -0.00236017 Jy ! Component: 750 - total flux cleaned = -0.00239411 Jy ! Component: 800 - total flux cleaned = -0.0024767 Jy ! Component: 850 - total flux cleaned = -0.00255751 Jy ! Component: 900 - total flux cleaned = -0.00263671 Jy ! Component: 950 - total flux cleaned = -0.00273014 Jy ! Component: 1000 - total flux cleaned = -0.00279109 Jy ! Component: 1050 - total flux cleaned = -0.00285111 Jy ! Component: 1100 - total flux cleaned = -0.00289539 Jy ! Component: 1150 - total flux cleaned = -0.0029246 Jy ! Component: 1200 - total flux cleaned = -0.00296788 Jy ! Component: 1250 - total flux cleaned = -0.00298212 Jy ! Component: 1300 - total flux cleaned = -0.00303743 Jy ! Component: 1350 - total flux cleaned = -0.00303719 Jy ! Component: 1400 - total flux cleaned = -0.00302365 Jy ! Component: 1450 - total flux cleaned = -0.00303735 Jy ! Component: 1500 - total flux cleaned = -0.00303717 Jy ! Component: 1550 - total flux cleaned = -0.0030371 Jy ! Component: 1600 - total flux cleaned = -0.00303715 Jy ! Component: 1650 - total flux cleaned = -0.00303716 Jy ! Component: 1700 - total flux cleaned = -0.00306206 Jy ! Component: 1750 - total flux cleaned = -0.00302542 Jy ! Component: 1800 - total flux cleaned = -0.00298928 Jy ! Component: 1850 - total flux cleaned = -0.00296547 Jy ! Component: 1900 - total flux cleaned = -0.00296579 Jy ! Component: 1950 - total flux cleaned = -0.00296569 Jy ! Component: 2000 - total flux cleaned = -0.00291942 Jy ! Component: 2050 - total flux cleaned = -0.002885 Jy ! Component: 2100 - total flux cleaned = -0.00286244 Jy ! Component: 2150 - total flux cleaned = -0.00286244 Jy ! Component: 2200 - total flux cleaned = -0.00282933 Jy ! Component: 2250 - total flux cleaned = -0.00277503 Jy ! Component: 2300 - total flux cleaned = -0.00277511 Jy ! Component: 2350 - total flux cleaned = -0.00273249 Jy ! Component: 2400 - total flux cleaned = -0.00271138 Jy ! Component: 2450 - total flux cleaned = -0.00270095 Jy ! Component: 2500 - total flux cleaned = -0.00265946 Jy ! Component: 2550 - total flux cleaned = -0.00264921 Jy ! Component: 2600 - total flux cleaned = -0.00257821 Jy ! Component: 2650 - total flux cleaned = -0.00261846 Jy ! Component: 2700 - total flux cleaned = -0.00255848 Jy ! Component: 2750 - total flux cleaned = -0.00251881 Jy ! Component: 2800 - total flux cleaned = -0.00251881 Jy ! Component: 2850 - total flux cleaned = -0.00246996 Jy ! Component: 2900 - total flux cleaned = -0.00245058 Jy ! Component: 2950 - total flux cleaned = -0.00243122 Jy ! Component: 3000 - total flux cleaned = -0.00240248 Jy ! Component: 3050 - total flux cleaned = -0.002374 Jy ! Component: 3100 - total flux cleaned = -0.00235514 Jy ! Component: 3150 - total flux cleaned = -0.00235517 Jy ! Component: 3200 - total flux cleaned = -0.00234584 Jy ! Component: 3250 - total flux cleaned = -0.0023458 Jy ! Component: 3300 - total flux cleaned = -0.00233657 Jy ! Component: 3350 - total flux cleaned = -0.00236396 Jy ! Component: 3400 - total flux cleaned = -0.0023274 Jy ! Component: 3450 - total flux cleaned = -0.00230925 Jy ! Component: 3500 - total flux cleaned = -0.00229117 Jy ! Component: 3550 - total flux cleaned = -0.00224631 Jy ! Component: 3600 - total flux cleaned = -0.00222844 Jy ! Component: 3650 - total flux cleaned = -0.00217514 Jy ! Component: 3700 - total flux cleaned = -0.00213978 Jy ! Component: 3750 - total flux cleaned = -0.00213097 Jy ! Component: 3800 - total flux cleaned = -0.00207833 Jy ! Component: 3850 - total flux cleaned = -0.00205214 Jy ! Component: 3900 - total flux cleaned = -0.002026 Jy ! Component: 3950 - total flux cleaned = -0.00200866 Jy ! Component: 4000 - total flux cleaned = -0.00195681 Jy ! Component: 4050 - total flux cleaned = -0.00193955 Jy ! Total flux subtracted in 4096 components = -0.00190524 Jy ! Clean residual min=-0.000555 max=0.000504 Jy/beam ! Clean residual mean=0.000000 rms=0.000154 Jy/beam ! Combined flux in latest and established models = 0.0524508 Jy keep ! Adding 245 model components to the UV plane model. ! The established model now contains 299 components and 0.0524507 Jy ![Exited script file: muppet] wmap "J1557+4522_S_2015_01_22_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.126 x 8.578 at 14.03 degrees (North through East) ! Clean map min=-0.0010436 max=0.049093 Jy/beam ! Writing clean map to FITS file: J1557+4522_S_2015_01_22_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0490927 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000152386 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.931215 0.931215 1.86243 3.72486 7.44972 14.8994 29.7989 59.5977 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.049 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.126 x 8.578 at 14.03 degrees (North through East) ! Clean map min=-0.0010436 max=0.049093 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1557+4522_S_2015_01_22_pus_uvs.log closed on Tue Jan 3 22:58:13 2017