! Started logfile: J1552+0850_S_2014_05_31_pus_uvs.log on Mon Nov 28 15:31:15 2016 obs J1552+0850_S_2014_05_31_pus_uva.fits ! Reading UV FITS file: J1552+0850_S_2014_05_31_pus_uva.fits ! AN table 1: 95 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.966316 visibilities/baseline/integration-bin. ! Found source: J1552+0850 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 336 lines of history. ! ! Reading 16524 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1552+0850_S_2014_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.964149Jy sigma=0.011407 ! Fit after self-cal, rms=0.938589Jy sigma=0.011119 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.871 mas, bmaj=6.682 mas, bpa=-4.462 degrees ! Estimated noise=747.444 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.048406 Jy ! Component: 100 - total flux cleaned = 0.0589832 Jy ! Total flux subtracted in 100 components = 0.0589832 Jy ! Clean residual min=-0.002694 max=0.003165 Jy/beam ! Clean residual mean=-0.000008 rms=0.000697 Jy/beam ! Combined flux in latest and established models = 0.0589832 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.0589832 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070393Jy sigma=0.000775 ! Fit after self-cal, rms=0.070378Jy sigma=0.000775 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.501 mas, bmaj=7.572 mas, bpa=-4.792 degrees ! Estimated noise=472.221 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0044241 Jy ! Component: 100 - total flux cleaned = 0.00619202 Jy ! Component: 150 - total flux cleaned = 0.00662666 Jy ! Component: 200 - total flux cleaned = 0.0067589 Jy ! Total flux subtracted in 200 components = 0.0067589 Jy ! Clean residual min=-0.001644 max=0.001487 Jy/beam ! Clean residual mean=-0.000000 rms=0.000411 Jy/beam ! Combined flux in latest and established models = 0.0657421 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 19 components and 0.0657421 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070096Jy sigma=0.000772 ! Fit after self-cal, rms=0.070086Jy sigma=0.000772 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.80 HN 1.01 KP 1.02 ! LA 1.18 MK 1.03 NL 0.95 OV 0.99 ! PT 0.99 SC 1.00 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.98 HN 1.05 KP 1.04 ! LA 1.13 MK 0.97 NL 1.00 OV 1.05 ! PT 0.98 SC 0.98 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.08 HN 0.99 KP 0.95 ! LA 0.92 MK 1.04 NL 1.02 OV 0.95 ! PT 1.01 SC 0.97 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.02 HN 1.05 KP 0.89 ! LA 0.90 MK 0.98 NL 1.03 OV 0.99 ! PT 1.00 SC 0.94 ! ! ! Fit before self-cal, rms=0.070086Jy sigma=0.000772 ! Fit after self-cal, rms=0.068607Jy sigma=0.000770 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.501 mas, bmaj=7.553 mas, bpa=-4.34 degrees ! Estimated noise=470.618 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.06524e-07 Jy ! Component: 100 - total flux cleaned = -0.000110974 Jy ! Component: 150 - total flux cleaned = -0.000170185 Jy ! Component: 200 - total flux cleaned = -0.000182588 Jy ! Total flux subtracted in 200 components = -0.000182588 Jy ! Clean residual min=-0.001604 max=0.001521 Jy/beam ! Clean residual mean=-0.000001 rms=0.000377 Jy/beam ! Combined flux in latest and established models = 0.0655596 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 25 components and 0.0655596 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068598Jy sigma=0.000769 ! Fit after self-cal, rms=0.068580Jy sigma=0.000769 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068580Jy sigma=0.000769 ! Fit after self-cal, rms=0.068570Jy sigma=0.000769 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.503 mas, bmaj=7.562 mas, bpa=-4.34 degrees ! Estimated noise=470.605 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.15622e-06 Jy ! Component: 100 - total flux cleaned = -6.93423e-05 Jy ! Component: 150 - total flux cleaned = -0.000116438 Jy ! Component: 200 - total flux cleaned = -0.000132273 Jy ! Total flux subtracted in 200 components = -0.000132273 Jy ! Clean residual min=-0.001489 max=0.001415 Jy/beam ! Clean residual mean=-0.000003 rms=0.000361 Jy/beam ! Combined flux in latest and established models = 0.0654273 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 29 components and 0.0654273 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068566Jy sigma=0.000769 ! Fit after self-cal, rms=0.068568Jy sigma=0.000768 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.32972e-05 Jy ! Component: 100 - total flux cleaned = -2.09873e-05 Jy ! Component: 150 - total flux cleaned = -3.38661e-05 Jy ! Component: 200 - total flux cleaned = -4.56677e-05 Jy ! Total flux subtracted in 200 components = -4.56677e-05 Jy ! Clean residual min=-0.001498 max=0.001398 Jy/beam ! Clean residual mean=-0.000003 rms=0.000362 Jy/beam ! Combined flux in latest and established models = 0.0653816 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 34 components and 0.0653816 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068566Jy sigma=0.000768 ! Fit after self-cal, rms=0.068565Jy sigma=0.000768 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068565Jy sigma=0.000768 ! Fit after self-cal, rms=0.068561Jy sigma=0.000768 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.502 mas, bmaj=7.573 mas, bpa=-4.405 degrees ! Estimated noise=470.294 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.61021e-05 Jy ! Component: 100 - total flux cleaned = -0.000103793 Jy ! Component: 150 - total flux cleaned = -0.000132346 Jy ! Component: 200 - total flux cleaned = -0.000147304 Jy ! Total flux subtracted in 200 components = -0.000147304 Jy ! Clean residual min=-0.001487 max=0.001409 Jy/beam ! Clean residual mean=-0.000003 rms=0.000360 Jy/beam ! Combined flux in latest and established models = 0.0652343 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 36 components and 0.0652343 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068559Jy sigma=0.000768 ! Fit after self-cal, rms=0.068559Jy sigma=0.000768 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.59906e-05 Jy ! Component: 100 - total flux cleaned = 1.13613e-05 Jy ! Component: 150 - total flux cleaned = 6.78387e-06 Jy ! Component: 200 - total flux cleaned = 2.44377e-06 Jy ! Total flux subtracted in 200 components = 2.44377e-06 Jy ! Clean residual min=-0.001488 max=0.001403 Jy/beam ! Clean residual mean=-0.000003 rms=0.000360 Jy/beam ! Combined flux in latest and established models = 0.0652367 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 40 components and 0.0652367 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068559Jy sigma=0.000768 ! Fit after self-cal, rms=0.068558Jy sigma=0.000768 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068558Jy sigma=0.000768 ! Fit after self-cal, rms=0.068536Jy sigma=0.000768 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.583 mas, bmaj=11.18 mas, bpa=-2.805 degrees ! Estimated noise=569.865 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000235511 Jy ! Component: 100 - total flux cleaned = 0.00018951 Jy ! Component: 150 - total flux cleaned = 0.000153439 Jy ! Component: 200 - total flux cleaned = 0.000138059 Jy ! Total flux subtracted in 200 components = 0.000138059 Jy ! Clean residual min=-0.001457 max=0.001550 Jy/beam ! Clean residual mean=-0.000005 rms=0.000429 Jy/beam ! Combined flux in latest and established models = 0.0653748 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 48 components and 0.0653748 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068538Jy sigma=0.000768 ! Fit after self-cal, rms=0.068536Jy sigma=0.000768 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.89531e-05 Jy ! Component: 100 - total flux cleaned = 2.76182e-06 Jy ! Component: 150 - total flux cleaned = -1.79983e-05 Jy ! Component: 200 - total flux cleaned = -2.9839e-05 Jy ! Total flux subtracted in 200 components = -2.9839e-05 Jy ! Clean residual min=-0.001471 max=0.001534 Jy/beam ! Clean residual mean=-0.000005 rms=0.000428 Jy/beam ! Combined flux in latest and established models = 0.065345 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 54 components and 0.065345 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068538Jy sigma=0.000768 ! Fit after self-cal, rms=0.068536Jy sigma=0.000768 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.502 mas, bmaj=7.58 mas, bpa=-4.456 degrees ! Estimated noise=469.932 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.502 x 7.58 at -4.456 degrees (North through East) ! Clean map min=-0.0014475 max=0.062482 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.86 mas, bmaj=6.669 mas, bpa=-4.072 degrees ! Estimated noise=745.089 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0481251 Jy ! Component: 100 - total flux cleaned = 0.0587869 Jy ! Component: 150 - total flux cleaned = 0.0625511 Jy ! Component: 200 - total flux cleaned = 0.0643912 Jy ! Total flux subtracted in 200 components = 0.0643912 Jy ! Clean residual min=-0.002372 max=0.002499 Jy/beam ! Clean residual mean=-0.000004 rms=0.000629 Jy/beam ! Combined flux in latest and established models = 0.0643912 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.0643912 Jy ! Inverting map and beam ! Estimated beam: bmin=3.502 mas, bmaj=7.58 mas, bpa=-4.456 degrees ! Estimated noise=469.932 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0010477 Jy ! Component: 100 - total flux cleaned = 0.00119911 Jy ! Component: 150 - total flux cleaned = 0.00117682 Jy ! Component: 200 - total flux cleaned = 0.00113299 Jy ! Total flux subtracted in 200 components = 0.00113299 Jy ! Clean residual min=-0.001515 max=0.001466 Jy/beam ! Clean residual mean=-0.000002 rms=0.000364 Jy/beam ! Combined flux in latest and established models = 0.0655242 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 27 components and 0.0655242 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.583 mas, bmaj=11.18 mas, bpa=-2.805 degrees ! Estimated noise=569.865 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000154834 Jy ! Component: 100 - total flux cleaned = 6.72632e-05 Jy ! Component: 150 - total flux cleaned = 1.27598e-05 Jy ! Component: 200 - total flux cleaned = -3.11919e-05 Jy ! Total flux subtracted in 200 components = -3.11919e-05 Jy ! Clean residual min=-0.001487 max=0.001565 Jy/beam ! Clean residual mean=-0.000005 rms=0.000429 Jy/beam ! Combined flux in latest and established models = 0.065493 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.61569e-05 Jy ! Component: 100 - total flux cleaned = -5.83925e-05 Jy ! Component: 150 - total flux cleaned = -8.44706e-05 Jy ! Component: 200 - total flux cleaned = -0.000101587 Jy ! Total flux subtracted in 200 components = -0.000101587 Jy ! Clean residual min=-0.001487 max=0.001572 Jy/beam ! Clean residual mean=-0.000005 rms=0.000427 Jy/beam ! Combined flux in latest and established models = 0.0653914 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 33 components and 0.0653914 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.502 mas, bmaj=7.58 mas, bpa=-4.456 degrees ! Estimated noise=469.932 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000123595 Jy ! Component: 100 - total flux cleaned = -0.000175842 Jy ! Component: 150 - total flux cleaned = -0.000215606 Jy ! Component: 200 - total flux cleaned = -0.000247349 Jy ! Total flux subtracted in 200 components = -0.000247349 Jy ! Clean residual min=-0.001483 max=0.001436 Jy/beam ! Clean residual mean=-0.000003 rms=0.000359 Jy/beam ! Combined flux in latest and established models = 0.065144 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 41 components and 0.065144 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068536Jy sigma=0.000768 ! Fit after self-cal, rms=0.068537Jy sigma=0.000768 wmodel J1552+0850_S_2014_05_31_pus_map.mod ! Writing 41 model components to file: J1552+0850_S_2014_05_31_pus_map.mod wobs J1552+0850_S_2014_05_31_pus_uvs.fits ! Writing UV FITS file: J1552+0850_S_2014_05_31_pus_uvs.fits wwins J1552+0850_S_2014_05_31_pus_map.win ! wwins: Wrote 1 windows to J1552+0850_S_2014_05_31_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -6.15457e-05 Jy ! Component: 100 - total flux cleaned = 1.36916e-05 Jy ! Component: 150 - total flux cleaned = 3.84371e-05 Jy ! Component: 200 - total flux cleaned = 1.64994e-05 Jy ! Component: 250 - total flux cleaned = -9.38664e-05 Jy ! Component: 300 - total flux cleaned = -0.000136139 Jy ! Component: 350 - total flux cleaned = -0.000239279 Jy ! Component: 400 - total flux cleaned = -0.000259366 Jy ! Component: 450 - total flux cleaned = -0.000338697 Jy ! Component: 500 - total flux cleaned = -0.000377585 Jy ! Component: 550 - total flux cleaned = -0.000509462 Jy ! Component: 600 - total flux cleaned = -0.000601241 Jy ! Component: 650 - total flux cleaned = -0.00067322 Jy ! Component: 700 - total flux cleaned = -0.000761909 Jy ! Component: 750 - total flux cleaned = -0.000866029 Jy ! Component: 800 - total flux cleaned = -0.00090043 Jy ! Component: 850 - total flux cleaned = -0.00105146 Jy ! Component: 900 - total flux cleaned = -0.00110082 Jy ! Component: 950 - total flux cleaned = -0.00118194 Jy ! Component: 1000 - total flux cleaned = -0.00126186 Jy ! Component: 1050 - total flux cleaned = -0.00135622 Jy ! Component: 1100 - total flux cleaned = -0.00149612 Jy ! Component: 1150 - total flux cleaned = -0.00152652 Jy ! Component: 1200 - total flux cleaned = -0.00163258 Jy ! Component: 1250 - total flux cleaned = -0.00169233 Jy ! Component: 1300 - total flux cleaned = -0.00179567 Jy ! Component: 1350 - total flux cleaned = -0.00183925 Jy ! Component: 1400 - total flux cleaned = -0.00189701 Jy ! Component: 1450 - total flux cleaned = -0.00198242 Jy ! Component: 1500 - total flux cleaned = -0.00203867 Jy ! Component: 1550 - total flux cleaned = -0.00214932 Jy ! Component: 1600 - total flux cleaned = -0.00217657 Jy ! Component: 1650 - total flux cleaned = -0.00219035 Jy ! Component: 1700 - total flux cleaned = -0.00228413 Jy ! Component: 1750 - total flux cleaned = -0.00237637 Jy ! Component: 1800 - total flux cleaned = -0.00242833 Jy ! Component: 1850 - total flux cleaned = -0.00246728 Jy ! Component: 1900 - total flux cleaned = -0.00249292 Jy ! Component: 1950 - total flux cleaned = -0.00246781 Jy ! Component: 2000 - total flux cleaned = -0.00251812 Jy ! Component: 2050 - total flux cleaned = -0.00254292 Jy ! Component: 2100 - total flux cleaned = -0.002543 Jy ! Component: 2150 - total flux cleaned = -0.00256738 Jy ! Component: 2200 - total flux cleaned = -0.00255533 Jy ! Component: 2250 - total flux cleaned = -0.00257941 Jy ! Component: 2300 - total flux cleaned = -0.00256739 Jy ! Component: 2350 - total flux cleaned = -0.00255558 Jy ! Component: 2400 - total flux cleaned = -0.0026022 Jy ! Component: 2450 - total flux cleaned = -0.00257909 Jy ! Component: 2500 - total flux cleaned = -0.00264759 Jy ! Component: 2550 - total flux cleaned = -0.00263601 Jy ! Component: 2600 - total flux cleaned = -0.00260225 Jy ! Component: 2650 - total flux cleaned = -0.00263566 Jy ! Component: 2700 - total flux cleaned = -0.00269118 Jy ! Component: 2750 - total flux cleaned = -0.00262535 Jy ! Component: 2800 - total flux cleaned = -0.00271256 Jy ! Component: 2850 - total flux cleaned = -0.00274489 Jy ! Component: 2900 - total flux cleaned = -0.00270187 Jy ! Component: 2950 - total flux cleaned = -0.00270201 Jy ! Component: 3000 - total flux cleaned = -0.00272324 Jy ! Component: 3050 - total flux cleaned = -0.00274421 Jy ! Component: 3100 - total flux cleaned = -0.00273383 Jy ! Component: 3150 - total flux cleaned = -0.00269243 Jy ! Component: 3200 - total flux cleaned = -0.00273343 Jy ! Component: 3250 - total flux cleaned = -0.00273337 Jy ! Component: 3300 - total flux cleaned = -0.00269303 Jy ! Component: 3350 - total flux cleaned = -0.0027031 Jy ! Component: 3400 - total flux cleaned = -0.00271309 Jy ! Component: 3450 - total flux cleaned = -0.00268339 Jy ! Component: 3500 - total flux cleaned = -0.00269322 Jy ! Component: 3550 - total flux cleaned = -0.00268347 Jy ! Component: 3600 - total flux cleaned = -0.00268342 Jy ! Component: 3650 - total flux cleaned = -0.00271246 Jy ! Component: 3700 - total flux cleaned = -0.00272214 Jy ! Component: 3750 - total flux cleaned = -0.0027413 Jy ! Component: 3800 - total flux cleaned = -0.00275084 Jy ! Component: 3850 - total flux cleaned = -0.00275086 Jy ! Component: 3900 - total flux cleaned = -0.00275079 Jy ! Component: 3950 - total flux cleaned = -0.00277882 Jy ! Component: 4000 - total flux cleaned = -0.00277873 Jy ! Component: 4050 - total flux cleaned = -0.00278797 Jy ! Total flux subtracted in 4096 components = -0.00277891 Jy ! Clean residual min=-0.000545 max=0.000641 Jy/beam ! Clean residual mean=0.000000 rms=0.000173 Jy/beam ! Combined flux in latest and established models = 0.0623651 Jy keep ! Adding 292 model components to the UV plane model. ! The established model now contains 333 components and 0.0623652 Jy ![Exited script file: muppet] wmap "J1552+0850_S_2014_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.502 x 7.58 at -4.456 degrees (North through East) ! Clean map min=-0.0012011 max=0.062541 Jy/beam ! Writing clean map to FITS file: J1552+0850_S_2014_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0625414 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000171212 device "J1552+0850_S_2014_05_31_pus\_map.eps/VPS" ! Attempting to open device: 'J1552+0850_S_2014_05_31_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.821275 0.821275 1.64255 3.2851 6.5702 13.1404 26.2808 52.5616 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.062 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.502 x 7.58 at -4.456 degrees (North through East) ! Clean map min=-0.0012011 max=0.062541 Jy/beam quit ! Quitting program ! Log file J1552+0850_S_2014_05_31_pus_uvs.log closed on Mon Nov 28 15:31:21 2016