! Started logfile: J1547+2052_S_2015_01_22_pus_uvs.log on Tue Jan 3 22:57:59 2017 obs J1547+2052_S_2015_01_22_pus_uva.fits ! Reading UV FITS file: J1547+2052_S_2015_01_22_pus_uva.fits ! AN table 1: 63 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.791534 visibilities/baseline/integration-bin. ! Found source: J1547+2052 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 281 lines of history. ! ! Reading 8976 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1547+2052_S_2015_01_22_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 66 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 66 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 66 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 66 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.995216Jy sigma=0.012429 ! Fit after self-cal, rms=0.961612Jy sigma=0.012035 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.611 mas, bmaj=7.002 mas, bpa=8.781 degrees ! Estimated noise=848.098 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0304122 Jy ! Component: 100 - total flux cleaned = 0.0376106 Jy ! Total flux subtracted in 100 components = 0.0376106 Jy ! Clean residual min=-0.002818 max=0.003314 Jy/beam ! Clean residual mean=0.000003 rms=0.000756 Jy/beam ! Combined flux in latest and established models = 0.0376106 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.0376106 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066089Jy sigma=0.000767 ! Fit after self-cal, rms=0.065171Jy sigma=0.000756 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.101 mas, bmaj=7.515 mas, bpa=8.775 degrees ! Estimated noise=605.607 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00482541 Jy ! Component: 100 - total flux cleaned = 0.0071137 Jy ! Component: 150 - total flux cleaned = 0.00834386 Jy ! Component: 200 - total flux cleaned = 0.00904754 Jy ! Total flux subtracted in 200 components = 0.00904754 Jy ! Clean residual min=-0.002022 max=0.002366 Jy/beam ! Clean residual mean=0.000003 rms=0.000574 Jy/beam ! Combined flux in latest and established models = 0.0466582 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 27 components and 0.0466582 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064791Jy sigma=0.000753 ! Fit after self-cal, rms=0.064725Jy sigma=0.000752 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.00* HN 0.98 KP 1.06 ! LA 0.99 MK 1.06 NL 1.01 OV 0.98 ! PT 1.00 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00* HN 1.02 KP 0.97 ! LA 0.92 MK 0.96 NL 0.95 OV 1.11 ! PT 1.17 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00* HN 1.01 KP 0.86 ! LA 0.79 MK 1.16 NL 1.05 OV 1.02 ! PT 0.94 SC 0.94 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.00* HN 0.83 KP 0.81 ! LA 0.88 MK 1.04 NL 1.05 OV 0.97 ! PT 1.15 SC 1.10 ! ! ! Fit before self-cal, rms=0.064725Jy sigma=0.000752 ! Fit after self-cal, rms=0.062785Jy sigma=0.000749 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.122 mas, bmaj=7.566 mas, bpa=8.697 degrees ! Estimated noise=600.684 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000639495 Jy ! Component: 100 - total flux cleaned = 0.000738589 Jy ! Component: 150 - total flux cleaned = 0.000753696 Jy ! Component: 200 - total flux cleaned = 0.000739301 Jy ! Total flux subtracted in 200 components = 0.000739301 Jy ! Clean residual min=-0.001752 max=0.001972 Jy/beam ! Clean residual mean=0.000002 rms=0.000456 Jy/beam ! Combined flux in latest and established models = 0.0473975 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 35 components and 0.0473975 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062766Jy sigma=0.000749 ! Fit after self-cal, rms=0.062752Jy sigma=0.000748 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062752Jy sigma=0.000748 ! Fit after self-cal, rms=0.062923Jy sigma=0.000748 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.124 mas, bmaj=7.568 mas, bpa=8.638 degrees ! Estimated noise=600.269 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000265058 Jy ! Component: 100 - total flux cleaned = 0.000317036 Jy ! Component: 150 - total flux cleaned = 0.000316962 Jy ! Component: 200 - total flux cleaned = 0.000291577 Jy ! Total flux subtracted in 200 components = 0.000291577 Jy ! Clean residual min=-0.001612 max=0.002081 Jy/beam ! Clean residual mean=0.000002 rms=0.000448 Jy/beam ! Combined flux in latest and established models = 0.047689 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 41 components and 0.047689 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062912Jy sigma=0.000748 ! Fit after self-cal, rms=0.062914Jy sigma=0.000748 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-54.5, -35). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0013655 Jy ! Component: 100 - total flux cleaned = 0.00152723 Jy ! Component: 150 - total flux cleaned = 0.00155883 Jy ! Component: 200 - total flux cleaned = 0.00158486 Jy ! Total flux subtracted in 200 components = 0.00158486 Jy ! Clean residual min=-0.001461 max=0.001578 Jy/beam ! Clean residual mean=0.000002 rms=0.000386 Jy/beam ! Combined flux in latest and established models = 0.0492739 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 57 components and 0.0492739 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062855Jy sigma=0.000747 ! Fit after self-cal, rms=0.062834Jy sigma=0.000747 ! Inverting map ! Added new window around map position (-85.5, -73). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00153695 Jy ! Component: 100 - total flux cleaned = 0.00199644 Jy ! Component: 150 - total flux cleaned = 0.002269 Jy ! Component: 200 - total flux cleaned = 0.00245724 Jy ! Total flux subtracted in 200 components = 0.00245724 Jy ! Clean residual min=-0.001475 max=0.001349 Jy/beam ! Clean residual mean=0.000002 rms=0.000365 Jy/beam ! Combined flux in latest and established models = 0.0517311 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 71 components and 0.0517311 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062784Jy sigma=0.000746 ! Fit after self-cal, rms=0.062766Jy sigma=0.000746 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062766Jy sigma=0.000746 ! Fit after self-cal, rms=0.062695Jy sigma=0.000746 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.125 mas, bmaj=7.565 mas, bpa=8.655 degrees ! Estimated noise=599.26 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000885579 Jy ! Component: 100 - total flux cleaned = 0.00115226 Jy ! Component: 150 - total flux cleaned = 0.0013354 Jy ! Component: 200 - total flux cleaned = 0.00140739 Jy ! Total flux subtracted in 200 components = 0.00140739 Jy ! Clean residual min=-0.001382 max=0.001259 Jy/beam ! Clean residual mean=0.000001 rms=0.000351 Jy/beam ! Combined flux in latest and established models = 0.0531385 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 77 components and 0.0531385 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062666Jy sigma=0.000746 ! Fit after self-cal, rms=0.062638Jy sigma=0.000746 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000333258 Jy ! Component: 100 - total flux cleaned = 0.000460004 Jy ! Component: 150 - total flux cleaned = 0.000574328 Jy ! Component: 200 - total flux cleaned = 0.00072017 Jy ! Total flux subtracted in 200 components = 0.00072017 Jy ! Clean residual min=-0.001294 max=0.001250 Jy/beam ! Clean residual mean=0.000001 rms=0.000343 Jy/beam ! Combined flux in latest and established models = 0.0538587 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 82 components and 0.0538587 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062620Jy sigma=0.000745 ! Fit after self-cal, rms=0.062597Jy sigma=0.000745 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062597Jy sigma=0.000745 ! Fit after self-cal, rms=0.062417Jy sigma=0.000745 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.501 mas, bmaj=10.47 mas, bpa=-2.515 degrees ! Estimated noise=779.208 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000655917 Jy ! Component: 100 - total flux cleaned = 0.000996213 Jy ! Component: 150 - total flux cleaned = 0.00111545 Jy ! Component: 200 - total flux cleaned = 0.00116147 Jy ! Total flux subtracted in 200 components = 0.00116147 Jy ! Clean residual min=-0.001348 max=0.001401 Jy/beam ! Clean residual mean=0.000002 rms=0.000408 Jy/beam ! Combined flux in latest and established models = 0.0550202 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 105 components and 0.0550202 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062415Jy sigma=0.000745 ! Fit after self-cal, rms=0.062404Jy sigma=0.000745 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000244478 Jy ! Component: 100 - total flux cleaned = 0.00047818 Jy ! Component: 150 - total flux cleaned = 0.000551137 Jy ! Component: 200 - total flux cleaned = 0.000618441 Jy ! Total flux subtracted in 200 components = 0.000618441 Jy ! Clean residual min=-0.001331 max=0.001390 Jy/beam ! Clean residual mean=0.000002 rms=0.000404 Jy/beam ! Combined flux in latest and established models = 0.0556386 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 112 components and 0.0556386 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062403Jy sigma=0.000745 ! Fit after self-cal, rms=0.062401Jy sigma=0.000745 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.124 mas, bmaj=7.561 mas, bpa=8.694 degrees ! Estimated noise=598.135 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.124 x 7.561 at 8.694 degrees (North through East) ! Clean map min=-0.0019882 max=0.041612 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.642 mas, bmaj=7.056 mas, bpa=8.824 degrees ! Estimated noise=848.267 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.031564 Jy ! Component: 100 - total flux cleaned = 0.039667 Jy ! Component: 150 - total flux cleaned = 0.0441656 Jy ! Component: 200 - total flux cleaned = 0.0474343 Jy ! Total flux subtracted in 200 components = 0.0474343 Jy ! Clean residual min=-0.002838 max=0.002474 Jy/beam ! Clean residual mean=0.000001 rms=0.000667 Jy/beam ! Combined flux in latest and established models = 0.0474342 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.0474342 Jy ! Inverting map and beam ! Estimated beam: bmin=3.124 mas, bmaj=7.561 mas, bpa=8.694 degrees ! Estimated noise=598.135 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00217643 Jy ! Component: 100 - total flux cleaned = 0.00345715 Jy ! Component: 150 - total flux cleaned = 0.00443253 Jy ! Component: 200 - total flux cleaned = 0.00505223 Jy ! Total flux subtracted in 200 components = 0.00505223 Jy ! Clean residual min=-0.001686 max=0.001644 Jy/beam ! Clean residual mean=0.000002 rms=0.000450 Jy/beam ! Combined flux in latest and established models = 0.0524865 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 39 components and 0.0524865 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.501 mas, bmaj=10.47 mas, bpa=-2.515 degrees ! Estimated noise=779.208 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000962767 Jy ! Component: 100 - total flux cleaned = 0.00127862 Jy ! Component: 150 - total flux cleaned = 0.00173448 Jy ! Component: 200 - total flux cleaned = 0.00205645 Jy ! Total flux subtracted in 200 components = 0.00205645 Jy ! Clean residual min=-0.001550 max=0.001613 Jy/beam ! Clean residual mean=0.000003 rms=0.000469 Jy/beam ! Combined flux in latest and established models = 0.0545429 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000224461 Jy ! Component: 100 - total flux cleaned = 0.000421856 Jy ! Component: 150 - total flux cleaned = 0.000553059 Jy ! Component: 200 - total flux cleaned = 0.000613724 Jy ! Total flux subtracted in 200 components = 0.000613724 Jy ! Clean residual min=-0.001353 max=0.001471 Jy/beam ! Clean residual mean=0.000002 rms=0.000429 Jy/beam ! Combined flux in latest and established models = 0.0551566 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 76 components and 0.0551566 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.124 mas, bmaj=7.561 mas, bpa=8.694 degrees ! Estimated noise=598.135 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000443589 Jy ! Component: 100 - total flux cleaned = 0.000654558 Jy ! Component: 150 - total flux cleaned = 0.000877852 Jy ! Component: 200 - total flux cleaned = 0.000993105 Jy ! Total flux subtracted in 200 components = 0.000993105 Jy ! Clean residual min=-0.001341 max=0.001254 Jy/beam ! Clean residual mean=0.000001 rms=0.000362 Jy/beam ! Combined flux in latest and established models = 0.0561497 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 93 components and 0.0561497 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062433Jy sigma=0.000745 ! Fit after self-cal, rms=0.062433Jy sigma=0.000745 wmodel J1547+2052_S_2015_01_22_pus_map.mod ! Writing 93 model components to file: J1547+2052_S_2015_01_22_pus_map.mod wobs J1547+2052_S_2015_01_22_pus_uvs.fits ! Writing UV FITS file: J1547+2052_S_2015_01_22_pus_uvs.fits wwins J1547+2052_S_2015_01_22_pus_map.win ! wwins: Wrote 3 windows to J1547+2052_S_2015_01_22_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000152352 Jy ! Component: 100 - total flux cleaned = -0.00015264 Jy ! Component: 150 - total flux cleaned = -0.000152161 Jy ! Component: 200 - total flux cleaned = -0.000172172 Jy ! Component: 250 - total flux cleaned = -7.52061e-05 Jy ! Component: 300 - total flux cleaned = -3.82479e-05 Jy ! Component: 350 - total flux cleaned = -3.82079e-05 Jy ! Component: 400 - total flux cleaned = -2.6897e-06 Jy ! Component: 450 - total flux cleaned = -2.3217e-06 Jy ! Component: 500 - total flux cleaned = 1.47007e-05 Jy ! Component: 550 - total flux cleaned = 3.06559e-05 Jy ! Component: 600 - total flux cleaned = 3.07764e-05 Jy ! Component: 650 - total flux cleaned = 4.61527e-05 Jy ! Component: 700 - total flux cleaned = 1.58489e-05 Jy ! Component: 750 - total flux cleaned = 4.5934e-05 Jy ! Component: 800 - total flux cleaned = 8.95749e-05 Jy ! Component: 850 - total flux cleaned = 7.55791e-05 Jy ! Component: 900 - total flux cleaned = 0.000145271 Jy ! Component: 950 - total flux cleaned = 0.000172355 Jy ! Component: 1000 - total flux cleaned = 0.000185909 Jy ! Component: 1050 - total flux cleaned = 0.000225131 Jy ! Component: 1100 - total flux cleaned = 0.000289445 Jy ! Component: 1150 - total flux cleaned = 0.000314806 Jy ! Component: 1200 - total flux cleaned = 0.000314688 Jy ! Component: 1250 - total flux cleaned = 0.000302946 Jy ! Component: 1300 - total flux cleaned = 0.000314969 Jy ! Component: 1350 - total flux cleaned = 0.000362324 Jy ! Component: 1400 - total flux cleaned = 0.00036216 Jy ! Component: 1450 - total flux cleaned = 0.000385053 Jy ! Component: 1500 - total flux cleaned = 0.000407562 Jy ! Component: 1550 - total flux cleaned = 0.0004184 Jy ! Component: 1600 - total flux cleaned = 0.000407442 Jy ! Component: 1650 - total flux cleaned = 0.000407358 Jy ! Component: 1700 - total flux cleaned = 0.000417897 Jy ! Component: 1750 - total flux cleaned = 0.000428211 Jy ! Component: 1800 - total flux cleaned = 0.000397342 Jy ! Component: 1850 - total flux cleaned = 0.000377039 Jy ! Component: 1900 - total flux cleaned = 0.000377295 Jy ! Component: 1950 - total flux cleaned = 0.000367479 Jy ! Component: 2000 - total flux cleaned = 0.000367574 Jy ! Component: 2050 - total flux cleaned = 0.000387237 Jy ! Component: 2100 - total flux cleaned = 0.000377714 Jy ! Component: 2150 - total flux cleaned = 0.000349235 Jy ! Component: 2200 - total flux cleaned = 0.000358664 Jy ! Component: 2250 - total flux cleaned = 0.000358548 Jy ! Component: 2300 - total flux cleaned = 0.000376791 Jy ! Component: 2350 - total flux cleaned = 0.000404023 Jy ! Component: 2400 - total flux cleaned = 0.00041283 Jy ! Component: 2450 - total flux cleaned = 0.000412871 Jy ! Component: 2500 - total flux cleaned = 0.000412914 Jy ! Component: 2550 - total flux cleaned = 0.000421501 Jy ! Component: 2600 - total flux cleaned = 0.000404369 Jy ! Component: 2650 - total flux cleaned = 0.000370308 Jy ! Component: 2700 - total flux cleaned = 0.000370367 Jy ! Component: 2750 - total flux cleaned = 0.000361881 Jy ! Component: 2800 - total flux cleaned = 0.000370157 Jy ! Component: 2850 - total flux cleaned = 0.000321022 Jy ! Component: 2900 - total flux cleaned = 0.00028849 Jy ! Component: 2950 - total flux cleaned = 0.0002886 Jy ! Component: 3000 - total flux cleaned = 0.000296504 Jy ! Component: 3050 - total flux cleaned = 0.000257047 Jy ! Component: 3100 - total flux cleaned = 0.000241418 Jy ! Component: 3150 - total flux cleaned = 0.000241458 Jy ! Component: 3200 - total flux cleaned = 0.00021059 Jy ! Component: 3250 - total flux cleaned = 0.000195339 Jy ! Component: 3300 - total flux cleaned = 0.000187809 Jy ! Component: 3350 - total flux cleaned = 0.000187818 Jy ! Component: 3400 - total flux cleaned = 0.000135437 Jy ! Component: 3450 - total flux cleaned = 0.000120628 Jy ! Component: 3500 - total flux cleaned = 0.000135419 Jy ! Component: 3550 - total flux cleaned = 0.000113541 Jy ! Component: 3600 - total flux cleaned = 0.000128042 Jy ! Component: 3650 - total flux cleaned = 9.19962e-05 Jy ! Component: 3700 - total flux cleaned = 9.91144e-05 Jy ! Component: 3750 - total flux cleaned = 7.05462e-05 Jy ! Component: 3800 - total flux cleaned = 4.92867e-05 Jy ! Component: 3850 - total flux cleaned = 4.22356e-05 Jy ! Component: 3900 - total flux cleaned = 7.21862e-06 Jy ! Component: 3950 - total flux cleaned = 2.51345e-07 Jy ! Component: 4000 - total flux cleaned = -2.73702e-05 Jy ! Component: 4050 - total flux cleaned = -4.11094e-05 Jy ! Total flux subtracted in 4096 components = -7.53067e-05 Jy ! Clean residual min=-0.000389 max=0.000376 Jy/beam ! Clean residual mean=-0.000000 rms=0.000120 Jy/beam ! Combined flux in latest and established models = 0.0560744 Jy keep ! Adding 254 model components to the UV plane model. ! The established model now contains 347 components and 0.0560744 Jy ![Exited script file: muppet] wmap "J1547+2052_S_2015_01_22_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.124 x 7.561 at 8.694 degrees (North through East) ! Clean map min=-0.0014063 max=0.040962 Jy/beam ! Writing clean map to FITS file: J1547+2052_S_2015_01_22_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0409619 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000118128 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.865158 0.865158 1.73032 3.46063 6.92126 13.8425 27.685 55.3701 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.04 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.124 x 7.561 at 8.694 degrees (North through East) ! Clean map min=-0.0014063 max=0.040962 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1547+2052_S_2015_01_22_pus_uvs.log closed on Tue Jan 3 22:58:04 2017