! Started logfile: J1542-0927_S_2015_01_23_pus_uvs.log on Mon Jan 2 19:29:11 2017 obs J1542-0927_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J1542-0927_S_2015_01_23_pus_uva.fits ! AN table 1: 147 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.901285 visibilities/baseline/integration-bin. ! Found source: J1542-0927 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 23848 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1542-0927_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 142 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 142 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 142 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 83 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.037054Jy sigma=0.009860 ! Fit after self-cal, rms=0.978226Jy sigma=0.009437 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.709 mas, bmaj=6.4 mas, bpa=-2.56 degrees ! Estimated noise=781.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.031665 Jy ! Component: 100 - total flux cleaned = 0.0397285 Jy ! Total flux subtracted in 100 components = 0.0397285 Jy ! Clean residual min=-0.005582 max=0.005973 Jy/beam ! Clean residual mean=-0.000023 rms=0.001511 Jy/beam ! Combined flux in latest and established models = 0.0397285 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.0397285 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.276910Jy sigma=0.000885 ! Fit after self-cal, rms=0.276542Jy sigma=0.000873 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.305 mas, bmaj=7.683 mas, bpa=-3.946 degrees ! Estimated noise=509.275 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0129872 Jy ! Component: 100 - total flux cleaned = 0.0205742 Jy ! Component: 150 - total flux cleaned = 0.0252937 Jy ! Component: 200 - total flux cleaned = 0.0282294 Jy ! Total flux subtracted in 200 components = 0.0282294 Jy ! Clean residual min=-0.010426 max=0.010189 Jy/beam ! Clean residual mean=-0.000023 rms=0.003262 Jy/beam ! Combined flux in latest and established models = 0.067958 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 42 components and 0.067958 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.275112Jy sigma=0.000857 ! Fit after self-cal, rms=0.274907Jy sigma=0.000855 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.42 FD 0.49 HN 1.38 KP 0.99 ! LA 0.94 MK 1.11 NL 1.72 OV 1.12 ! PT 0.67 SC 1.16 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.36 FD 0.61 HN 1.20 KP 0.96 ! LA 0.88 MK 1.03 NL 1.60 OV 1.13 ! PT 0.70 SC 1.21 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.32 FD 0.61 HN 1.23 KP 0.87 ! LA 0.71 MK 1.26 NL 1.82 OV 1.13 ! PT 0.65 SC 1.30 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.48 FD 0.51 HN 1.06 KP 0.84 ! LA 0.72 MK 1.08 NL 1.55 OV 1.17 ! PT 0.71 SC 1.11 ! ! ! Fit before self-cal, rms=0.274907Jy sigma=0.000855 ! Fit after self-cal, rms=0.174977Jy sigma=0.000835 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.509 mas, bmaj=8.332 mas, bpa=-4.468 degrees ! Estimated noise=543.149 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000807105 Jy ! Component: 100 - total flux cleaned = 0.000753177 Jy ! Component: 150 - total flux cleaned = 0.000751095 Jy ! Component: 200 - total flux cleaned = 0.000751024 Jy ! Total flux subtracted in 200 components = 0.000751024 Jy ! Clean residual min=-0.008556 max=0.010795 Jy/beam ! Clean residual mean=-0.000003 rms=0.002875 Jy/beam ! Combined flux in latest and established models = 0.068709 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 47 components and 0.068709 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.174883Jy sigma=0.000835 ! Fit after self-cal, rms=0.175834Jy sigma=0.000828 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.175834Jy sigma=0.000828 ! Fit after self-cal, rms=0.156563Jy sigma=0.000814 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.667 mas, bmaj=8.766 mas, bpa=-5.329 degrees ! Estimated noise=591.738 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00178983 Jy ! Component: 100 - total flux cleaned = 0.00159496 Jy ! Component: 150 - total flux cleaned = 0.00133305 Jy ! Component: 200 - total flux cleaned = 0.00115651 Jy ! Total flux subtracted in 200 components = 0.00115651 Jy ! Clean residual min=-0.007117 max=0.011032 Jy/beam ! Clean residual mean=0.000011 rms=0.002573 Jy/beam ! Combined flux in latest and established models = 0.0698655 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 52 components and 0.0698655 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.156323Jy sigma=0.000815 ! Fit after self-cal, rms=0.158724Jy sigma=0.000811 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00158008 Jy ! Component: 100 - total flux cleaned = -0.00174274 Jy ! Component: 150 - total flux cleaned = -0.00183907 Jy ! Component: 200 - total flux cleaned = -0.00182035 Jy ! Total flux subtracted in 200 components = -0.00182035 Jy ! Clean residual min=-0.007339 max=0.008784 Jy/beam ! Clean residual mean=0.000011 rms=0.002518 Jy/beam ! Combined flux in latest and established models = 0.0680451 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 61 components and 0.0680451 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158736Jy sigma=0.000811 ! Fit after self-cal, rms=0.158727Jy sigma=0.000811 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158727Jy sigma=0.000811 ! Fit after self-cal, rms=0.192732Jy sigma=0.000809 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.79 mas, bmaj=9.126 mas, bpa=-5.784 degrees ! Estimated noise=630.203 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00153587 Jy ! Component: 100 - total flux cleaned = 0.00142479 Jy ! Component: 150 - total flux cleaned = 0.00123515 Jy ! Component: 200 - total flux cleaned = 0.00107878 Jy ! Total flux subtracted in 200 components = 0.00107878 Jy ! Clean residual min=-0.006871 max=0.009347 Jy/beam ! Clean residual mean=0.000007 rms=0.002562 Jy/beam ! Combined flux in latest and established models = 0.0691239 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 62 components and 0.0691239 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.192558Jy sigma=0.000810 ! Fit after self-cal, rms=0.193567Jy sigma=0.000809 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00102003 Jy ! Component: 100 - total flux cleaned = -0.00110274 Jy ! Component: 150 - total flux cleaned = -0.00110255 Jy ! Component: 200 - total flux cleaned = -0.00110419 Jy ! Total flux subtracted in 200 components = -0.00110419 Jy ! Clean residual min=-0.007089 max=0.008558 Jy/beam ! Clean residual mean=0.000009 rms=0.002522 Jy/beam ! Combined flux in latest and established models = 0.0680197 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 64 components and 0.0680197 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.193575Jy sigma=0.000809 ! Fit after self-cal, rms=0.193557Jy sigma=0.000809 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.193557Jy sigma=0.000809 ! Fit after self-cal, rms=0.224097Jy sigma=0.000808 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.068 mas, bmaj=16.97 mas, bpa=-8.284 degrees ! Estimated noise=680.146 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00127257 Jy ! Component: 100 - total flux cleaned = 0.0013692 Jy ! Component: 150 - total flux cleaned = 0.00139753 Jy ! Component: 200 - total flux cleaned = 0.00139804 Jy ! Total flux subtracted in 200 components = 0.00139804 Jy ! Clean residual min=-0.009663 max=0.011827 Jy/beam ! Clean residual mean=0.000004 rms=0.004154 Jy/beam ! Combined flux in latest and established models = 0.0694178 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 67 components and 0.0694178 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.224073Jy sigma=0.000808 ! Fit after self-cal, rms=0.224759Jy sigma=0.000808 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000212326 Jy ! Component: 100 - total flux cleaned = -0.000215483 Jy ! Component: 150 - total flux cleaned = -0.000195672 Jy ! Component: 200 - total flux cleaned = -0.000176654 Jy ! Total flux subtracted in 200 components = -0.000176654 Jy ! Clean residual min=-0.009731 max=0.011897 Jy/beam ! Clean residual mean=0.000006 rms=0.004142 Jy/beam ! Combined flux in latest and established models = 0.0692411 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 67 components and 0.0692411 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.224766Jy sigma=0.000808 ! Fit after self-cal, rms=0.224748Jy sigma=0.000808 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.906 mas, bmaj=9.457 mas, bpa=-6.063 degrees ! Estimated noise=664.504 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.906 x 9.457 at -6.063 degrees (North through East) ! Clean map min=-0.0071404 max=0.053454 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.036 mas, bmaj=7.315 mas, bpa=-4.029 degrees ! Estimated noise=1175.65 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0427075 Jy ! Component: 100 - total flux cleaned = 0.0542842 Jy ! Component: 150 - total flux cleaned = 0.0597046 Jy ! Component: 200 - total flux cleaned = 0.0612413 Jy ! Total flux subtracted in 200 components = 0.0612413 Jy ! Clean residual min=-0.006618 max=0.008210 Jy/beam ! Clean residual mean=0.000000 rms=0.001693 Jy/beam ! Combined flux in latest and established models = 0.0612413 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.0612413 Jy ! Inverting map and beam ! Estimated beam: bmin=3.906 mas, bmaj=9.457 mas, bpa=-6.063 degrees ! Estimated noise=664.504 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00451989 Jy ! Component: 100 - total flux cleaned = 0.00618609 Jy ! Component: 150 - total flux cleaned = 0.00648234 Jy ! Component: 200 - total flux cleaned = 0.00668514 Jy ! Total flux subtracted in 200 components = 0.00668514 Jy ! Clean residual min=-0.007400 max=0.008845 Jy/beam ! Clean residual mean=0.000004 rms=0.002615 Jy/beam ! Combined flux in latest and established models = 0.0679265 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 21 components and 0.0679265 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.068 mas, bmaj=16.97 mas, bpa=-8.284 degrees ! Estimated noise=680.146 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000929598 Jy ! Component: 100 - total flux cleaned = 0.00100406 Jy ! Component: 150 - total flux cleaned = 0.00109999 Jy ! Component: 200 - total flux cleaned = 0.00115569 Jy ! Total flux subtracted in 200 components = 0.00115569 Jy ! Clean residual min=-0.009844 max=0.011933 Jy/beam ! Clean residual mean=0.000006 rms=0.004152 Jy/beam ! Combined flux in latest and established models = 0.0690822 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.01471e-05 Jy ! Component: 100 - total flux cleaned = 0.000128438 Jy ! Component: 150 - total flux cleaned = 0.000129923 Jy ! Component: 200 - total flux cleaned = 0.00013012 Jy ! Total flux subtracted in 200 components = 0.00013012 Jy ! Clean residual min=-0.009811 max=0.011855 Jy/beam ! Clean residual mean=0.000007 rms=0.004148 Jy/beam ! Combined flux in latest and established models = 0.0692123 Jy ! Adding 6 model components to the UV plane model. ! The established model now contains 24 components and 0.0692123 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.906 mas, bmaj=9.457 mas, bpa=-6.063 degrees ! Estimated noise=664.504 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000437992 Jy ! Component: 100 - total flux cleaned = -0.000621668 Jy ! Component: 150 - total flux cleaned = -0.000670625 Jy ! Component: 200 - total flux cleaned = -0.000752914 Jy ! Total flux subtracted in 200 components = -0.000752914 Jy ! Clean residual min=-0.007262 max=0.008663 Jy/beam ! Clean residual mean=0.000005 rms=0.002603 Jy/beam ! Combined flux in latest and established models = 0.0684594 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 32 components and 0.0684594 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.224700Jy sigma=0.000808 ! Fit after self-cal, rms=0.224639Jy sigma=0.000808 wmodel J1542-0927_S_2015_01_23_pus_map.mod ! Writing 32 model components to file: J1542-0927_S_2015_01_23_pus_map.mod wobs J1542-0927_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J1542-0927_S_2015_01_23_pus_uvs.fits wwins J1542-0927_S_2015_01_23_pus_map.win ! wwins: Wrote 1 windows to J1542-0927_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00362578 Jy ! Component: 100 - total flux cleaned = 0.0058943 Jy ! Component: 150 - total flux cleaned = 0.00763064 Jy ! Component: 200 - total flux cleaned = 0.00925853 Jy ! Component: 250 - total flux cleaned = 0.0107955 Jy ! Component: 300 - total flux cleaned = 0.0120438 Jy ! Component: 350 - total flux cleaned = 0.0123428 Jy ! Component: 400 - total flux cleaned = 0.0128241 Jy ! Component: 450 - total flux cleaned = 0.0131955 Jy ! Component: 500 - total flux cleaned = 0.0133762 Jy ! Component: 550 - total flux cleaned = 0.0136381 Jy ! Component: 600 - total flux cleaned = 0.0139781 Jy ! Component: 650 - total flux cleaned = 0.0143933 Jy ! Component: 700 - total flux cleaned = 0.0147992 Jy ! Component: 750 - total flux cleaned = 0.0152759 Jy ! Component: 800 - total flux cleaned = 0.0154315 Jy ! Component: 850 - total flux cleaned = 0.0155844 Jy ! Component: 900 - total flux cleaned = 0.0159581 Jy ! Component: 950 - total flux cleaned = 0.0160323 Jy ! Component: 1000 - total flux cleaned = 0.0163203 Jy ! Component: 1050 - total flux cleaned = 0.0163898 Jy ! Component: 1100 - total flux cleaned = 0.0165293 Jy ! Component: 1150 - total flux cleaned = 0.0164613 Jy ! Component: 1200 - total flux cleaned = 0.0165288 Jy ! Component: 1250 - total flux cleaned = 0.0163972 Jy ! Component: 1300 - total flux cleaned = 0.0162017 Jy ! Component: 1350 - total flux cleaned = 0.016331 Jy ! Component: 1400 - total flux cleaned = 0.0162035 Jy ! Component: 1450 - total flux cleaned = 0.0161413 Jy ! Component: 1500 - total flux cleaned = 0.0159567 Jy ! Component: 1550 - total flux cleaned = 0.0159552 Jy ! Component: 1600 - total flux cleaned = 0.0157148 Jy ! Component: 1650 - total flux cleaned = 0.0154193 Jy ! Component: 1700 - total flux cleaned = 0.0151856 Jy ! Component: 1750 - total flux cleaned = 0.0151869 Jy ! Component: 1800 - total flux cleaned = 0.0148458 Jy ! Component: 1850 - total flux cleaned = 0.0146779 Jy ! Component: 1900 - total flux cleaned = 0.0142904 Jy ! Component: 1950 - total flux cleaned = 0.0140717 Jy ! Component: 2000 - total flux cleaned = 0.0139098 Jy ! Component: 2050 - total flux cleaned = 0.0136959 Jy ! Component: 2100 - total flux cleaned = 0.0136959 Jy ! Component: 2150 - total flux cleaned = 0.0133828 Jy ! Component: 2200 - total flux cleaned = 0.0131256 Jy ! Component: 2250 - total flux cleaned = 0.0129216 Jy ! Component: 2300 - total flux cleaned = 0.0128204 Jy ! Component: 2350 - total flux cleaned = 0.0126713 Jy ! Component: 2400 - total flux cleaned = 0.0124252 Jy ! Component: 2450 - total flux cleaned = 0.0122796 Jy ! Component: 2500 - total flux cleaned = 0.0121829 Jy ! Component: 2550 - total flux cleaned = 0.0121346 Jy ! Component: 2600 - total flux cleaned = 0.0119935 Jy ! Component: 2650 - total flux cleaned = 0.011668 Jy ! Component: 2700 - total flux cleaned = 0.0116688 Jy ! Component: 2750 - total flux cleaned = 0.0114862 Jy ! Component: 2800 - total flux cleaned = 0.0113518 Jy ! Component: 2850 - total flux cleaned = 0.011218 Jy ! Component: 2900 - total flux cleaned = 0.0113069 Jy ! Component: 2950 - total flux cleaned = 0.0113507 Jy ! Component: 3000 - total flux cleaned = 0.011264 Jy ! Component: 3050 - total flux cleaned = 0.0111785 Jy ! Component: 3100 - total flux cleaned = 0.0111362 Jy ! Component: 3150 - total flux cleaned = 0.0111783 Jy ! Component: 3200 - total flux cleaned = 0.0110532 Jy ! Component: 3250 - total flux cleaned = 0.0109713 Jy ! Component: 3300 - total flux cleaned = 0.0108486 Jy ! Component: 3350 - total flux cleaned = 0.0107681 Jy ! Component: 3400 - total flux cleaned = 0.0108488 Jy ! Component: 3450 - total flux cleaned = 0.0109278 Jy ! Component: 3500 - total flux cleaned = 0.010966 Jy ! Component: 3550 - total flux cleaned = 0.0110051 Jy ! Component: 3600 - total flux cleaned = 0.0108896 Jy ! Component: 3650 - total flux cleaned = 0.0110044 Jy ! Component: 3700 - total flux cleaned = 0.0110043 Jy ! Component: 3750 - total flux cleaned = 0.011154 Jy ! Component: 3800 - total flux cleaned = 0.0110053 Jy ! Component: 3850 - total flux cleaned = 0.0110782 Jy ! Component: 3900 - total flux cleaned = 0.0109319 Jy ! Component: 3950 - total flux cleaned = 0.0109322 Jy ! Component: 4000 - total flux cleaned = 0.0109323 Jy ! Component: 4050 - total flux cleaned = 0.0108967 Jy ! Total flux subtracted in 4096 components = 0.0107198 Jy ! Clean residual min=-0.001849 max=0.001981 Jy/beam ! Clean residual mean=0.000001 rms=0.000878 Jy/beam ! Combined flux in latest and established models = 0.0791792 Jy keep ! Adding 397 model components to the UV plane model. ! The established model now contains 429 components and 0.0791793 Jy ![Exited script file: muppet] wmap "J1542-0927_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.906 x 9.457 at -6.063 degrees (North through East) ! Clean map min=-0.0050156 max=0.055298 Jy/beam ! Writing clean map to FITS file: J1542-0927_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0552975 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000914222 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -4.95983 4.95983 9.91966 19.8393 39.6787 79.3573 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0027 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.055 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.906 x 9.457 at -6.063 degrees (North through East) ! Clean map min=-0.0050156 max=0.055298 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1542-0927_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 19:29:16 2017