! Started logfile: J1539+0430_S_2015_01_23_pus_uvs.log on Mon Jan 2 19:28:56 2017 obs J1539+0430_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J1539+0430_S_2015_01_23_pus_uva.fits ! AN table 1: 82 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.874526 visibilities/baseline/integration-bin. ! Found source: J1539+0430 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 12908 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1539+0430_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 94 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 94 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.879229Jy sigma=0.009590 ! Fit after self-cal, rms=0.864705Jy sigma=0.009451 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.928 mas, bmaj=6.471 mas, bpa=-1.461 degrees ! Estimated noise=914.853 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.109416 Jy ! Component: 100 - total flux cleaned = 0.133377 Jy ! Total flux subtracted in 100 components = 0.133377 Jy ! Clean residual min=-0.007314 max=0.010561 Jy/beam ! Clean residual mean=0.000007 rms=0.001844 Jy/beam ! Combined flux in latest and established models = 0.133377 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.133377 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114256Jy sigma=0.000860 ! Fit after self-cal, rms=0.114230Jy sigma=0.000860 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.513 mas, bmaj=7.363 mas, bpa=-0.2826 degrees ! Estimated noise=613.915 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-49, 39). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0120103 Jy ! Component: 100 - total flux cleaned = 0.0187795 Jy ! Component: 150 - total flux cleaned = 0.0233016 Jy ! Component: 200 - total flux cleaned = 0.0265213 Jy ! Total flux subtracted in 200 components = 0.0265213 Jy ! Clean residual min=-0.005878 max=0.009767 Jy/beam ! Clean residual mean=-0.000007 rms=0.001631 Jy/beam ! Combined flux in latest and established models = 0.159899 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 41 components and 0.159899 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112830Jy sigma=0.000839 ! Fit after self-cal, rms=0.112741Jy sigma=0.000838 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.80 HN 0.94 KP 1.07 ! LA 1.19 MK 1.05 NL 1.06 OV 0.94 ! PT 0.97 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.20 HN 1.01 KP 0.99 ! LA 1.13 MK 1.03 NL 1.15 OV 0.96 ! PT 0.98 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 0.95 HN 1.00 KP 0.83 ! LA 0.92 MK 1.09 NL 1.28 OV 0.93 ! PT 0.94 SC 1.07 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.25 HN 0.97 KP 0.80 ! LA 0.99 MK 1.02 NL 0.95 OV 0.95 ! PT 0.99 SC 1.00 ! ! ! Fit before self-cal, rms=0.112741Jy sigma=0.000838 ! Fit after self-cal, rms=0.117895Jy sigma=0.000814 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.551 mas, bmaj=7.425 mas, bpa=0.05754 degrees ! Estimated noise=613.219 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00173596 Jy ! Component: 100 - total flux cleaned = 0.00219806 Jy ! Component: 150 - total flux cleaned = 0.00251948 Jy ! Component: 200 - total flux cleaned = 0.00265691 Jy ! Total flux subtracted in 200 components = 0.00265691 Jy ! Clean residual min=-0.004686 max=0.005424 Jy/beam ! Clean residual mean=-0.000011 rms=0.001315 Jy/beam ! Combined flux in latest and established models = 0.162556 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 62 components and 0.162556 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117804Jy sigma=0.000813 ! Fit after self-cal, rms=0.117944Jy sigma=0.000812 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117944Jy sigma=0.000812 ! Fit after self-cal, rms=0.123947Jy sigma=0.000790 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.55 mas, bmaj=7.417 mas, bpa=0.2404 degrees ! Estimated noise=616.117 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00337786 Jy ! Component: 100 - total flux cleaned = -0.00492642 Jy ! Component: 150 - total flux cleaned = -0.00541474 Jy ! Component: 200 - total flux cleaned = -0.00563758 Jy ! Total flux subtracted in 200 components = -0.00563758 Jy ! Clean residual min=-0.002223 max=0.001856 Jy/beam ! Clean residual mean=-0.000005 rms=0.000543 Jy/beam ! Combined flux in latest and established models = 0.156918 Jy selfcal ! Performing phase self-cal ! Adding 58 model components to the UV plane model. ! The established model now contains 115 components and 0.156918 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123844Jy sigma=0.000788 ! Fit after self-cal, rms=0.123913Jy sigma=0.000788 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00103612 Jy ! Component: 100 - total flux cleaned = -0.00137066 Jy ! Component: 150 - total flux cleaned = -0.00152701 Jy ! Component: 200 - total flux cleaned = -0.00168837 Jy ! Total flux subtracted in 200 components = -0.00168837 Jy ! Clean residual min=-0.002151 max=0.001851 Jy/beam ! Clean residual mean=-0.000006 rms=0.000517 Jy/beam ! Combined flux in latest and established models = 0.15523 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 130 components and 0.15523 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123894Jy sigma=0.000788 ! Fit after self-cal, rms=0.123887Jy sigma=0.000788 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123887Jy sigma=0.000788 ! Fit after self-cal, rms=0.124909Jy sigma=0.000787 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.551 mas, bmaj=7.427 mas, bpa=0.2225 degrees ! Estimated noise=615.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00183445 Jy ! Component: 100 - total flux cleaned = -0.00278911 Jy ! Component: 150 - total flux cleaned = -0.00306639 Jy ! Component: 200 - total flux cleaned = -0.00315795 Jy ! Total flux subtracted in 200 components = -0.00315795 Jy ! Clean residual min=-0.001872 max=0.001579 Jy/beam ! Clean residual mean=-0.000005 rms=0.000447 Jy/beam ! Combined flux in latest and established models = 0.152072 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 143 components and 0.152072 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124878Jy sigma=0.000786 ! Fit after self-cal, rms=0.124878Jy sigma=0.000786 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000609187 Jy ! Component: 100 - total flux cleaned = -0.000741115 Jy ! Component: 150 - total flux cleaned = -0.000779418 Jy ! Component: 200 - total flux cleaned = -0.000796685 Jy ! Total flux subtracted in 200 components = -0.000796685 Jy ! Clean residual min=-0.001808 max=0.001527 Jy/beam ! Clean residual mean=-0.000005 rms=0.000436 Jy/beam ! Combined flux in latest and established models = 0.151275 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 157 components and 0.151275 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124871Jy sigma=0.000786 ! Fit after self-cal, rms=0.124867Jy sigma=0.000786 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124867Jy sigma=0.000786 ! Fit after self-cal, rms=0.125322Jy sigma=0.000786 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.488 mas, bmaj=11.47 mas, bpa=-1.029 degrees ! Estimated noise=772.608 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000998698 Jy ! Component: 100 - total flux cleaned = -0.00121097 Jy ! Component: 150 - total flux cleaned = -0.00137753 Jy ! Component: 200 - total flux cleaned = -0.00146675 Jy ! Total flux subtracted in 200 components = -0.00146675 Jy ! Clean residual min=-0.002049 max=0.001610 Jy/beam ! Clean residual mean=-0.000010 rms=0.000521 Jy/beam ! Combined flux in latest and established models = 0.149808 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 169 components and 0.149808 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125317Jy sigma=0.000786 ! Fit after self-cal, rms=0.125322Jy sigma=0.000786 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.82647e-05 Jy ! Component: 100 - total flux cleaned = -0.000197376 Jy ! Component: 150 - total flux cleaned = -0.000254098 Jy ! Component: 200 - total flux cleaned = -0.000264221 Jy ! Total flux subtracted in 200 components = -0.000264221 Jy ! Clean residual min=-0.002040 max=0.001517 Jy/beam ! Clean residual mean=-0.000011 rms=0.000508 Jy/beam ! Combined flux in latest and established models = 0.149544 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 183 components and 0.149544 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125323Jy sigma=0.000786 ! Fit after self-cal, rms=0.125323Jy sigma=0.000786 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.551 mas, bmaj=7.43 mas, bpa=0.1936 degrees ! Estimated noise=613.944 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.551 x 7.43 at 0.1936 degrees (North through East) ! Clean map min=-0.0020457 max=0.14049 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.948 mas, bmaj=6.528 mas, bpa=-0.9156 degrees ! Estimated noise=922.502 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.110225 Jy ! Component: 100 - total flux cleaned = 0.134313 Jy ! Component: 150 - total flux cleaned = 0.140697 Jy ! Component: 200 - total flux cleaned = 0.144117 Jy ! Total flux subtracted in 200 components = 0.144117 Jy ! Clean residual min=-0.002830 max=0.003673 Jy/beam ! Clean residual mean=0.000001 rms=0.000649 Jy/beam ! Combined flux in latest and established models = 0.144117 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.144117 Jy ! Inverting map and beam ! Estimated beam: bmin=3.551 mas, bmaj=7.43 mas, bpa=0.1936 degrees ! Estimated noise=613.944 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5, -2.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0029141 Jy ! Component: 100 - total flux cleaned = 0.00395894 Jy ! Component: 150 - total flux cleaned = 0.00425074 Jy ! Component: 200 - total flux cleaned = 0.00434878 Jy ! Total flux subtracted in 200 components = 0.00434878 Jy ! Clean residual min=-0.001816 max=0.001795 Jy/beam ! Clean residual mean=-0.000004 rms=0.000432 Jy/beam ! Combined flux in latest and established models = 0.148466 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 46 components and 0.148466 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.488 mas, bmaj=11.47 mas, bpa=-1.029 degrees ! Estimated noise=772.608 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000254587 Jy ! Component: 100 - total flux cleaned = 0.000333267 Jy ! Component: 150 - total flux cleaned = 0.000334082 Jy ! Component: 200 - total flux cleaned = 0.000311696 Jy ! Total flux subtracted in 200 components = 0.000311696 Jy ! Clean residual min=-0.002009 max=0.001681 Jy/beam ! Clean residual mean=-0.000009 rms=0.000498 Jy/beam ! Combined flux in latest and established models = 0.148778 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.93407e-07 Jy ! Component: 100 - total flux cleaned = -1.9892e-05 Jy ! Component: 150 - total flux cleaned = -3.82424e-05 Jy ! Component: 200 - total flux cleaned = -5.44063e-05 Jy ! Total flux subtracted in 200 components = -5.44063e-05 Jy ! Clean residual min=-0.002047 max=0.001706 Jy/beam ! Clean residual mean=-0.000010 rms=0.000493 Jy/beam ! Combined flux in latest and established models = 0.148723 Jy ! Adding 58 model components to the UV plane model. ! The established model now contains 101 components and 0.148723 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.551 mas, bmaj=7.43 mas, bpa=0.1936 degrees ! Estimated noise=613.944 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000165486 Jy ! Component: 100 - total flux cleaned = -6.90012e-05 Jy ! Component: 150 - total flux cleaned = -6.92658e-05 Jy ! Component: 200 - total flux cleaned = -4.22099e-05 Jy ! Total flux subtracted in 200 components = -4.22099e-05 Jy ! Clean residual min=-0.001700 max=0.001674 Jy/beam ! Clean residual mean=-0.000005 rms=0.000399 Jy/beam ! Combined flux in latest and established models = 0.148681 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 120 components and 0.148681 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125325Jy sigma=0.000786 ! Fit after self-cal, rms=0.125324Jy sigma=0.000786 wmodel J1539+0430_S_2015_01_23_pus_map.mod ! Writing 120 model components to file: J1539+0430_S_2015_01_23_pus_map.mod wobs J1539+0430_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J1539+0430_S_2015_01_23_pus_uvs.fits wwins J1539+0430_S_2015_01_23_pus_map.win ! wwins: Wrote 3 windows to J1539+0430_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000326682 Jy ! Component: 100 - total flux cleaned = -0.000687436 Jy ! Component: 150 - total flux cleaned = -0.000921801 Jy ! Component: 200 - total flux cleaned = -0.00107105 Jy ! Component: 250 - total flux cleaned = -0.00116658 Jy ! Component: 300 - total flux cleaned = -0.00121262 Jy ! Component: 350 - total flux cleaned = -0.0012578 Jy ! Component: 400 - total flux cleaned = -0.00130184 Jy ! Component: 450 - total flux cleaned = -0.00130126 Jy ! Component: 500 - total flux cleaned = -0.00121729 Jy ! Component: 550 - total flux cleaned = -0.0012175 Jy ! Component: 600 - total flux cleaned = -0.00119734 Jy ! Component: 650 - total flux cleaned = -0.00117761 Jy ! Component: 700 - total flux cleaned = -0.00117747 Jy ! Component: 750 - total flux cleaned = -0.00115825 Jy ! Component: 800 - total flux cleaned = -0.00112072 Jy ! Component: 850 - total flux cleaned = -0.00113942 Jy ! Component: 900 - total flux cleaned = -0.00110278 Jy ! Component: 950 - total flux cleaned = -0.00117473 Jy ! Component: 1000 - total flux cleaned = -0.00112146 Jy ! Component: 1050 - total flux cleaned = -0.00106948 Jy ! Component: 1100 - total flux cleaned = -0.00101817 Jy ! Component: 1150 - total flux cleaned = -0.00105266 Jy ! Component: 1200 - total flux cleaned = -0.00110278 Jy ! Component: 1250 - total flux cleaned = -0.00101954 Jy ! Component: 1300 - total flux cleaned = -0.00100307 Jy ! Component: 1350 - total flux cleaned = -0.00100296 Jy ! Component: 1400 - total flux cleaned = -0.00100294 Jy ! Component: 1450 - total flux cleaned = -0.00101843 Jy ! Component: 1500 - total flux cleaned = -0.00101819 Jy ! Component: 1550 - total flux cleaned = -0.00104897 Jy ! Component: 1600 - total flux cleaned = -0.00106452 Jy ! Component: 1650 - total flux cleaned = -0.00114059 Jy ! Component: 1700 - total flux cleaned = -0.00120084 Jy ! Component: 1750 - total flux cleaned = -0.0012603 Jy ! Component: 1800 - total flux cleaned = -0.00128991 Jy ! Component: 1850 - total flux cleaned = -0.00134829 Jy ! Component: 1900 - total flux cleaned = -0.00142034 Jy ! Component: 1950 - total flux cleaned = -0.00142042 Jy ! Component: 2000 - total flux cleaned = -0.0015057 Jy ! Component: 2050 - total flux cleaned = -0.00153385 Jy ! Component: 2100 - total flux cleaned = -0.0016034 Jy ! Component: 2150 - total flux cleaned = -0.00161707 Jy ! Component: 2200 - total flux cleaned = -0.00158953 Jy ! Component: 2250 - total flux cleaned = -0.00160314 Jy ! Component: 2300 - total flux cleaned = -0.0016302 Jy ! Component: 2350 - total flux cleaned = -0.00165724 Jy ! Component: 2400 - total flux cleaned = -0.00169687 Jy ! Component: 2450 - total flux cleaned = -0.00172303 Jy ! Component: 2500 - total flux cleaned = -0.00174912 Jy ! Component: 2550 - total flux cleaned = -0.00178791 Jy ! Component: 2600 - total flux cleaned = -0.00176216 Jy ! Component: 2650 - total flux cleaned = -0.00176222 Jy ! Component: 2700 - total flux cleaned = -0.00178745 Jy ! Component: 2750 - total flux cleaned = -0.00178744 Jy ! Component: 2800 - total flux cleaned = -0.00178749 Jy ! Component: 2850 - total flux cleaned = -0.00184937 Jy ! Component: 2900 - total flux cleaned = -0.00177568 Jy ! Component: 2950 - total flux cleaned = -0.00178797 Jy ! Component: 3000 - total flux cleaned = -0.00177601 Jy ! Component: 3050 - total flux cleaned = -0.00175202 Jy ! Component: 3100 - total flux cleaned = -0.00176395 Jy ! Component: 3150 - total flux cleaned = -0.00178766 Jy ! Component: 3200 - total flux cleaned = -0.00174035 Jy ! Component: 3250 - total flux cleaned = -0.00170513 Jy ! Component: 3300 - total flux cleaned = -0.00172853 Jy ! Component: 3350 - total flux cleaned = -0.00171693 Jy ! Component: 3400 - total flux cleaned = -0.00170539 Jy ! Component: 3450 - total flux cleaned = -0.00170537 Jy ! Component: 3500 - total flux cleaned = -0.00168255 Jy ! Component: 3550 - total flux cleaned = -0.00169385 Jy ! Component: 3600 - total flux cleaned = -0.0016375 Jy ! Component: 3650 - total flux cleaned = -0.0016599 Jy ! Component: 3700 - total flux cleaned = -0.00162648 Jy ! Component: 3750 - total flux cleaned = -0.00167071 Jy ! Component: 3800 - total flux cleaned = -0.00161573 Jy ! Component: 3850 - total flux cleaned = -0.00162674 Jy ! Component: 3900 - total flux cleaned = -0.00159413 Jy ! Component: 3950 - total flux cleaned = -0.00154007 Jy ! Component: 4000 - total flux cleaned = -0.0015509 Jy ! Component: 4050 - total flux cleaned = -0.00147595 Jy ! Total flux subtracted in 4096 components = -0.00147599 Jy ! Clean residual min=-0.000566 max=0.000795 Jy/beam ! Clean residual mean=-0.000004 rms=0.000202 Jy/beam ! Combined flux in latest and established models = 0.147205 Jy keep ! Adding 304 model components to the UV plane model. ! The established model now contains 424 components and 0.147205 Jy ![Exited script file: muppet] wmap "J1539+0430_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.551 x 7.43 at 0.1936 degrees (North through East) ! Clean map min=-0.0011438 max=0.14122 Jy/beam ! Writing clean map to FITS file: J1539+0430_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.141222 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000199277 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.423328 0.423328 0.846656 1.69331 3.38662 6.77325 13.5465 27.093 54.186 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.141 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.551 x 7.43 at 0.1936 degrees (North through East) ! Clean map min=-0.0011438 max=0.14122 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1539+0430_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 19:29:01 2017