! Started logfile: J1535+1954_S_2014_08_09_pus_uvs.log on Tue Nov 29 23:09:07 2016 obs J1535+1954_S_2014_08_09_pus_uva.fits ! Reading UV FITS file: J1535+1954_S_2014_08_09_pus_uva.fits ! AN table 1: 113 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.881219 visibilities/baseline/integration-bin. ! Found source: J1535+1954 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 342 lines of history. ! ! Reading 17924 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1535+1954_S_2014_08_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 69 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 69 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 69 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 69 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.932658Jy sigma=0.011027 ! Fit after self-cal, rms=0.918542Jy sigma=0.010872 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.258 mas, bmaj=7.314 mas, bpa=13.27 degrees ! Estimated noise=718.352 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0636328 Jy ! Component: 100 - total flux cleaned = 0.0775264 Jy ! Total flux subtracted in 100 components = 0.0775264 Jy ! Clean residual min=-0.002996 max=0.004004 Jy/beam ! Clean residual mean=0.000007 rms=0.000723 Jy/beam ! Combined flux in latest and established models = 0.0775264 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0775264 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071951Jy sigma=0.000780 ! Fit after self-cal, rms=0.071946Jy sigma=0.000780 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.895 mas, bmaj=8.157 mas, bpa=11.17 degrees ! Estimated noise=454.713 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00514024 Jy ! Component: 100 - total flux cleaned = 0.00732183 Jy ! Component: 150 - total flux cleaned = 0.00854221 Jy ! Component: 200 - total flux cleaned = 0.00933324 Jy ! Total flux subtracted in 200 components = 0.00933324 Jy ! Clean residual min=-0.002388 max=0.001726 Jy/beam ! Clean residual mean=0.000001 rms=0.000482 Jy/beam ! Combined flux in latest and established models = 0.0868596 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 42 components and 0.0868596 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071500Jy sigma=0.000777 ! Fit after self-cal, rms=0.071507Jy sigma=0.000777 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.87 HN 0.97 KP 1.10 ! LA 1.13 MK 1.07 NL 0.97 OV 0.99 ! PT 1.04 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.05 HN 1.02 KP 1.01 ! LA 1.06 MK 1.08 NL 0.90 OV 1.01 ! PT 1.02 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.14 HN 1.04 KP 0.93 ! LA 0.82 MK 1.10 NL 0.99 OV 0.98 ! PT 0.99 SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.00 HN 0.98 KP 0.90 ! LA 0.82 MK 1.11 NL 1.09 OV 1.01 ! PT 1.04 SC 0.98 ! ! ! Fit before self-cal, rms=0.071507Jy sigma=0.000777 ! Fit after self-cal, rms=0.070147Jy sigma=0.000771 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.928 mas, bmaj=8.182 mas, bpa=11.41 degrees ! Estimated noise=456.05 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.00348e-05 Jy ! Component: 100 - total flux cleaned = -1.86249e-05 Jy ! Component: 150 - total flux cleaned = -2.87904e-05 Jy ! Component: 200 - total flux cleaned = -3.77666e-05 Jy ! Total flux subtracted in 200 components = -3.77666e-05 Jy ! Clean residual min=-0.001664 max=0.001676 Jy/beam ! Clean residual mean=-0.000000 rms=0.000386 Jy/beam ! Combined flux in latest and established models = 0.0868218 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 51 components and 0.0868218 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070140Jy sigma=0.000771 ! Fit after self-cal, rms=0.070126Jy sigma=0.000771 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070126Jy sigma=0.000771 ! Fit after self-cal, rms=0.069371Jy sigma=0.000769 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.929 mas, bmaj=8.182 mas, bpa=11.5 degrees ! Estimated noise=456.101 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.8526e-05 Jy ! Component: 100 - total flux cleaned = 3.95865e-05 Jy ! Component: 150 - total flux cleaned = 2.58542e-05 Jy ! Component: 200 - total flux cleaned = 7.46381e-06 Jy ! Total flux subtracted in 200 components = 7.46381e-06 Jy ! Clean residual min=-0.001609 max=0.001403 Jy/beam ! Clean residual mean=-0.000001 rms=0.000337 Jy/beam ! Combined flux in latest and established models = 0.0868293 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 58 components and 0.0868293 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069369Jy sigma=0.000769 ! Fit after self-cal, rms=0.069365Jy sigma=0.000769 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.53472e-05 Jy ! Component: 100 - total flux cleaned = -6.98971e-05 Jy ! Component: 150 - total flux cleaned = -7.43427e-05 Jy ! Component: 200 - total flux cleaned = -8.59741e-05 Jy ! Total flux subtracted in 200 components = -8.59741e-05 Jy ! Clean residual min=-0.001587 max=0.001401 Jy/beam ! Clean residual mean=-0.000001 rms=0.000337 Jy/beam ! Combined flux in latest and established models = 0.0867433 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 62 components and 0.0867433 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069364Jy sigma=0.000769 ! Fit after self-cal, rms=0.069364Jy sigma=0.000769 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069364Jy sigma=0.000769 ! Fit after self-cal, rms=0.069445Jy sigma=0.000769 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.931 mas, bmaj=8.178 mas, bpa=11.58 degrees ! Estimated noise=456.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.72018e-05 Jy ! Component: 100 - total flux cleaned = 3.58602e-05 Jy ! Component: 150 - total flux cleaned = 2.67361e-05 Jy ! Component: 200 - total flux cleaned = 1.02103e-05 Jy ! Total flux subtracted in 200 components = 1.02103e-05 Jy ! Clean residual min=-0.001582 max=0.001380 Jy/beam ! Clean residual mean=-0.000001 rms=0.000336 Jy/beam ! Combined flux in latest and established models = 0.0867535 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 64 components and 0.0867535 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069444Jy sigma=0.000769 ! Fit after self-cal, rms=0.069445Jy sigma=0.000769 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.67038e-05 Jy ! Component: 100 - total flux cleaned = -4.0421e-05 Jy ! Component: 150 - total flux cleaned = -4.9642e-05 Jy ! Component: 200 - total flux cleaned = -6.09466e-05 Jy ! Total flux subtracted in 200 components = -6.09466e-05 Jy ! Clean residual min=-0.001570 max=0.001374 Jy/beam ! Clean residual mean=-0.000001 rms=0.000336 Jy/beam ! Combined flux in latest and established models = 0.0866926 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 64 components and 0.0866926 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069445Jy sigma=0.000769 ! Fit after self-cal, rms=0.069444Jy sigma=0.000769 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069444Jy sigma=0.000769 ! Fit after self-cal, rms=0.069521Jy sigma=0.000769 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.412 mas, bmaj=10.43 mas, bpa=-0.7856 degrees ! Estimated noise=535.805 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.37075e-05 Jy ! Component: 100 - total flux cleaned = 0.000101939 Jy ! Component: 150 - total flux cleaned = 0.000112266 Jy ! Component: 200 - total flux cleaned = 0.000114435 Jy ! Total flux subtracted in 200 components = 0.000114435 Jy ! Clean residual min=-0.001669 max=0.001415 Jy/beam ! Clean residual mean=-0.000002 rms=0.000425 Jy/beam ! Combined flux in latest and established models = 0.086807 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 69 components and 0.086807 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069521Jy sigma=0.000769 ! Fit after self-cal, rms=0.069522Jy sigma=0.000769 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.53025e-06 Jy ! Component: 100 - total flux cleaned = -4.05909e-06 Jy ! Component: 150 - total flux cleaned = -6.05656e-07 Jy ! Component: 200 - total flux cleaned = -6.03308e-07 Jy ! Total flux subtracted in 200 components = -6.03308e-07 Jy ! Clean residual min=-0.001674 max=0.001412 Jy/beam ! Clean residual mean=-0.000002 rms=0.000424 Jy/beam ! Combined flux in latest and established models = 0.0868064 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 71 components and 0.0868064 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069522Jy sigma=0.000769 ! Fit after self-cal, rms=0.069522Jy sigma=0.000769 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.932 mas, bmaj=8.175 mas, bpa=11.63 degrees ! Estimated noise=456.741 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.932 x 8.175 at 11.63 degrees (North through East) ! Clean map min=-0.0015422 max=0.083132 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.279 mas, bmaj=7.356 mas, bpa=13.85 degrees ! Estimated noise=725.157 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0641995 Jy ! Component: 100 - total flux cleaned = 0.0782842 Jy ! Component: 150 - total flux cleaned = 0.0822113 Jy ! Component: 200 - total flux cleaned = 0.0841894 Jy ! Total flux subtracted in 200 components = 0.0841894 Jy ! Clean residual min=-0.002596 max=0.002154 Jy/beam ! Clean residual mean=0.000005 rms=0.000558 Jy/beam ! Combined flux in latest and established models = 0.0841894 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.0841894 Jy ! Inverting map and beam ! Estimated beam: bmin=3.932 mas, bmaj=8.175 mas, bpa=11.63 degrees ! Estimated noise=456.741 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00158291 Jy ! Component: 100 - total flux cleaned = 0.00219861 Jy ! Component: 150 - total flux cleaned = 0.00224038 Jy ! Component: 200 - total flux cleaned = 0.00225721 Jy ! Total flux subtracted in 200 components = 0.00225721 Jy ! Clean residual min=-0.001630 max=0.001334 Jy/beam ! Clean residual mean=-0.000001 rms=0.000339 Jy/beam ! Combined flux in latest and established models = 0.0864466 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 36 components and 0.0864466 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.412 mas, bmaj=10.43 mas, bpa=-0.7856 degrees ! Estimated noise=535.805 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000198099 Jy ! Component: 100 - total flux cleaned = 0.00023117 Jy ! Component: 150 - total flux cleaned = 0.000269394 Jy ! Component: 200 - total flux cleaned = 0.000285178 Jy ! Total flux subtracted in 200 components = 0.000285178 Jy ! Clean residual min=-0.001686 max=0.001423 Jy/beam ! Clean residual mean=-0.000001 rms=0.000425 Jy/beam ! Combined flux in latest and established models = 0.0867318 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.634e-06 Jy ! Component: 100 - total flux cleaned = 8.47685e-06 Jy ! Component: 150 - total flux cleaned = 8.42193e-06 Jy ! Component: 200 - total flux cleaned = 8.51971e-06 Jy ! Total flux subtracted in 200 components = 8.51971e-06 Jy ! Clean residual min=-0.001675 max=0.001420 Jy/beam ! Clean residual mean=-0.000001 rms=0.000425 Jy/beam ! Combined flux in latest and established models = 0.0867403 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 47 components and 0.0867403 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.932 mas, bmaj=8.175 mas, bpa=11.63 degrees ! Estimated noise=456.741 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.65575e-05 Jy ! Component: 100 - total flux cleaned = 1.84901e-05 Jy ! Component: 150 - total flux cleaned = -3.31161e-06 Jy ! Component: 200 - total flux cleaned = -1.63721e-05 Jy ! Total flux subtracted in 200 components = -1.63721e-05 Jy ! Clean residual min=-0.001584 max=0.001358 Jy/beam ! Clean residual mean=-0.000001 rms=0.000337 Jy/beam ! Combined flux in latest and established models = 0.0867239 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 55 components and 0.0867239 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069524Jy sigma=0.000769 ! Fit after self-cal, rms=0.069523Jy sigma=0.000769 wmodel J1535+1954_S_2014_08_09_pus_map.mod ! Writing 55 model components to file: J1535+1954_S_2014_08_09_pus_map.mod wobs J1535+1954_S_2014_08_09_pus_uvs.fits ! Writing UV FITS file: J1535+1954_S_2014_08_09_pus_uvs.fits wwins J1535+1954_S_2014_08_09_pus_map.win ! wwins: Wrote 1 windows to J1535+1954_S_2014_08_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000416852 Jy ! Component: 100 - total flux cleaned = -0.000583658 Jy ! Component: 150 - total flux cleaned = -0.000692915 Jy ! Component: 200 - total flux cleaned = -0.000733923 Jy ! Component: 250 - total flux cleaned = -0.00073408 Jy ! Component: 300 - total flux cleaned = -0.000657853 Jy ! Component: 350 - total flux cleaned = -0.000584246 Jy ! Component: 400 - total flux cleaned = -0.00049486 Jy ! Component: 450 - total flux cleaned = -0.000424892 Jy ! Component: 500 - total flux cleaned = -0.000374022 Jy ! Component: 550 - total flux cleaned = -0.000307826 Jy ! Component: 600 - total flux cleaned = -0.000242917 Jy ! Component: 650 - total flux cleaned = -0.000195651 Jy ! Component: 700 - total flux cleaned = -0.000180405 Jy ! Component: 750 - total flux cleaned = -0.000165555 Jy ! Component: 800 - total flux cleaned = -0.000151182 Jy ! Component: 850 - total flux cleaned = -0.000122634 Jy ! Component: 900 - total flux cleaned = -9.45994e-05 Jy ! Component: 950 - total flux cleaned = -9.45703e-05 Jy ! Component: 1000 - total flux cleaned = -3.97875e-05 Jy ! Component: 1050 - total flux cleaned = -3.99872e-05 Jy ! Component: 1100 - total flux cleaned = -6.64828e-05 Jy ! Component: 1150 - total flux cleaned = -1.43541e-05 Jy ! Component: 1200 - total flux cleaned = -5.30015e-05 Jy ! Component: 1250 - total flux cleaned = -2.73994e-05 Jy ! Component: 1300 - total flux cleaned = -5.22843e-05 Jy ! Component: 1350 - total flux cleaned = -2.77297e-05 Jy ! Component: 1400 - total flux cleaned = -6.42664e-05 Jy ! Component: 1450 - total flux cleaned = -5.23341e-05 Jy ! Component: 1500 - total flux cleaned = -2.84287e-05 Jy ! Component: 1550 - total flux cleaned = -5.13631e-06 Jy ! Component: 1600 - total flux cleaned = -2.83016e-05 Jy ! Component: 1650 - total flux cleaned = -1.65798e-05 Jy ! Component: 1700 - total flux cleaned = 1.75313e-05 Jy ! Component: 1750 - total flux cleaned = 6.30612e-06 Jy ! Component: 1800 - total flux cleaned = 3.95411e-05 Jy ! Component: 1850 - total flux cleaned = 5.04068e-05 Jy ! Component: 1900 - total flux cleaned = 5.06423e-05 Jy ! Component: 1950 - total flux cleaned = 7.20172e-05 Jy ! Component: 2000 - total flux cleaned = 9.33218e-05 Jy ! Component: 2050 - total flux cleaned = 0.000114177 Jy ! Component: 2100 - total flux cleaned = 0.000103946 Jy ! Component: 2150 - total flux cleaned = 7.31285e-05 Jy ! Component: 2200 - total flux cleaned = 0.000103633 Jy ! Component: 2250 - total flux cleaned = 0.000113603 Jy ! Component: 2300 - total flux cleaned = 6.37118e-05 Jy ! Component: 2350 - total flux cleaned = 0.000103207 Jy ! Component: 2400 - total flux cleaned = 7.36835e-05 Jy ! Component: 2450 - total flux cleaned = 7.36384e-05 Jy ! Component: 2500 - total flux cleaned = 7.36988e-05 Jy ! Component: 2550 - total flux cleaned = 0.000102295 Jy ! Component: 2600 - total flux cleaned = 0.00010231 Jy ! Component: 2650 - total flux cleaned = 0.000130377 Jy ! Component: 2700 - total flux cleaned = 0.000149033 Jy ! Component: 2750 - total flux cleaned = 0.000185821 Jy ! Component: 2800 - total flux cleaned = 0.000149355 Jy ! Component: 2850 - total flux cleaned = 0.000158515 Jy ! Component: 2900 - total flux cleaned = 0.000140698 Jy ! Component: 2950 - total flux cleaned = 0.000131767 Jy ! Component: 3000 - total flux cleaned = 0.000167175 Jy ! Component: 3050 - total flux cleaned = 0.000140883 Jy ! Component: 3100 - total flux cleaned = 0.000167019 Jy ! Component: 3150 - total flux cleaned = 0.000149721 Jy ! Component: 3200 - total flux cleaned = 0.000123924 Jy ! Component: 3250 - total flux cleaned = 0.000106774 Jy ! Component: 3300 - total flux cleaned = 0.000106756 Jy ! Component: 3350 - total flux cleaned = 8.15387e-05 Jy ! Component: 3400 - total flux cleaned = 6.49519e-05 Jy ! Component: 3450 - total flux cleaned = 7.3206e-05 Jy ! Component: 3500 - total flux cleaned = 4.85346e-05 Jy ! Component: 3550 - total flux cleaned = 2.39428e-05 Jy ! Component: 3600 - total flux cleaned = -3.29341e-05 Jy ! Component: 3650 - total flux cleaned = -1.67126e-05 Jy ! Component: 3700 - total flux cleaned = -2.47425e-05 Jy ! Component: 3750 - total flux cleaned = -5.67187e-05 Jy ! Component: 3800 - total flux cleaned = -3.27606e-05 Jy ! Component: 3850 - total flux cleaned = -7.22079e-05 Jy ! Component: 3900 - total flux cleaned = -8.0056e-05 Jy ! Component: 3950 - total flux cleaned = -0.000111211 Jy ! Component: 4000 - total flux cleaned = -0.000126628 Jy ! Component: 4050 - total flux cleaned = -0.000111249 Jy ! Total flux subtracted in 4096 components = -0.000126592 Jy ! Clean residual min=-0.000436 max=0.000484 Jy/beam ! Clean residual mean=-0.000000 rms=0.000146 Jy/beam ! Combined flux in latest and established models = 0.0865973 Jy keep ! Adding 337 model components to the UV plane model. ! The established model now contains 392 components and 0.0865974 Jy ![Exited script file: muppet] wmap "J1535+1954_S_2014_08_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.932 x 8.175 at 11.63 degrees (North through East) ! Clean map min=-0.0011392 max=0.08324 Jy/beam ! Writing clean map to FITS file: J1535+1954_S_2014_08_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0832397 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000144355 device "J1535+1954_S_2014_08_09_pus\_map.eps/VPS" ! Attempting to open device: 'J1535+1954_S_2014_08_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.520261 0.520261 1.04052 2.08104 4.16209 8.32417 16.6483 33.2967 66.5934 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.083 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.932 x 8.175 at 11.63 degrees (North through East) ! Clean map min=-0.0011392 max=0.08324 Jy/beam quit ! Quitting program ! Log file J1535+1954_S_2014_08_09_pus_uvs.log closed on Tue Nov 29 23:09:12 2016