! Started logfile: J1534-3526_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:30:52 2017 obs J1534-3526_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J1534-3526_S_2014_01_04_pus_uva.fits ! AN table 1: 76 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.430556 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1534-3526 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 4712 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1534-3526_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 228 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 228 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 228 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 228 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.569123Jy sigma=0.004857 ! Fit after self-cal, rms=0.434560Jy sigma=0.003545 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.47 mas, bmaj=7.279 mas, bpa=-7.119 degrees ! Estimated noise=1627.38 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.513204 Jy ! Component: 100 - total flux cleaned = 0.625147 Jy ! Total flux subtracted in 100 components = 0.625147 Jy ! Clean residual min=-0.029091 max=0.040690 Jy/beam ! Clean residual mean=-0.000045 rms=0.009156 Jy/beam ! Combined flux in latest and established models = 0.625147 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.625147 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.349074Jy sigma=0.001591 ! Fit after self-cal, rms=0.349074Jy sigma=0.001591 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.992 mas, bmaj=8.709 mas, bpa=-7.473 degrees ! Estimated noise=1186.6 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.046761 Jy ! Component: 100 - total flux cleaned = 0.0692093 Jy ! Component: 150 - total flux cleaned = 0.0821154 Jy ! Component: 200 - total flux cleaned = 0.0895526 Jy ! Total flux subtracted in 200 components = 0.0895526 Jy ! Clean residual min=-0.028706 max=0.040341 Jy/beam ! Clean residual mean=-0.000197 rms=0.009942 Jy/beam ! Combined flux in latest and established models = 0.7147 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.7147 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.333951Jy sigma=0.001576 ! Fit after self-cal, rms=0.333960Jy sigma=0.001576 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.00* KP 1.00* LA 1.04 ! MK 0.99 NL 1.03 OV 0.97 PT 0.97 ! SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.00* KP 1.00* LA 1.02 ! MK 0.99 NL 1.09 OV 1.01 PT 0.96 ! SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00* KP 1.00* LA 0.85 ! MK 1.01 NL 1.04 OV 0.94 PT 0.95 ! SC 0.96 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.29 FD 1.00* KP 1.00* LA 0.91 ! MK 1.01 NL 1.18 OV 1.01 PT 0.97 ! SC 0.98 ! ! ! Fit before self-cal, rms=0.333960Jy sigma=0.001576 ! Fit after self-cal, rms=0.298783Jy sigma=0.001386 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.97 mas, bmaj=8.71 mas, bpa=-7.272 degrees ! Estimated noise=1213.83 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0155207 Jy ! Component: 100 - total flux cleaned = 0.0230586 Jy ! Component: 150 - total flux cleaned = 0.0269663 Jy ! Component: 200 - total flux cleaned = 0.0272424 Jy ! Total flux subtracted in 200 components = 0.0272424 Jy ! Clean residual min=-0.038438 max=0.028651 Jy/beam ! Clean residual mean=-0.000445 rms=0.009424 Jy/beam ! Combined flux in latest and established models = 0.741942 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 36 components and 0.741942 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.295907Jy sigma=0.001391 ! Fit after self-cal, rms=0.295852Jy sigma=0.001391 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.295852Jy sigma=0.001391 ! Fit after self-cal, rms=0.167621Jy sigma=0.001179 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.969 mas, bmaj=8.657 mas, bpa=-7.233 degrees ! Estimated noise=1226.81 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00755387 Jy ! Component: 100 - total flux cleaned = 0.00828972 Jy ! Component: 150 - total flux cleaned = 0.00830008 Jy ! Component: 200 - total flux cleaned = 0.00829863 Jy ! Total flux subtracted in 200 components = 0.00829863 Jy ! Clean residual min=-0.010020 max=0.007917 Jy/beam ! Clean residual mean=-0.000097 rms=0.002428 Jy/beam ! Combined flux in latest and established models = 0.750241 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 42 components and 0.750241 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.166759Jy sigma=0.001178 ! Fit after self-cal, rms=0.166752Jy sigma=0.001178 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000121054 Jy ! Component: 100 - total flux cleaned = -0.000123312 Jy ! Component: 150 - total flux cleaned = -0.000124261 Jy ! Component: 200 - total flux cleaned = -0.000224893 Jy ! Total flux subtracted in 200 components = -0.000224893 Jy ! Clean residual min=-0.009624 max=0.007730 Jy/beam ! Clean residual mean=-0.000096 rms=0.002411 Jy/beam ! Combined flux in latest and established models = 0.750016 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 46 components and 0.750016 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.166549Jy sigma=0.001177 ! Fit after self-cal, rms=0.166547Jy sigma=0.001177 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.166547Jy sigma=0.001177 ! Fit after self-cal, rms=0.166306Jy sigma=0.001175 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.962 mas, bmaj=8.649 mas, bpa=-7.282 degrees ! Estimated noise=1236.61 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00665843 Jy ! Component: 100 - total flux cleaned = 0.00837233 Jy ! Component: 150 - total flux cleaned = 0.00837246 Jy ! Component: 200 - total flux cleaned = 0.00837237 Jy ! Total flux subtracted in 200 components = 0.00837237 Jy ! Clean residual min=-0.008769 max=0.007041 Jy/beam ! Clean residual mean=-0.000068 rms=0.002222 Jy/beam ! Combined flux in latest and established models = 0.758388 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 48 components and 0.758388 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165621Jy sigma=0.001176 ! Fit after self-cal, rms=0.165620Jy sigma=0.001176 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.3508e-06 Jy ! Component: 100 - total flux cleaned = 2.54403e-06 Jy ! Component: 150 - total flux cleaned = -6.07881e-07 Jy ! Component: 200 - total flux cleaned = -3.35501e-06 Jy ! Total flux subtracted in 200 components = -3.35501e-06 Jy ! Clean residual min=-0.008602 max=0.006903 Jy/beam ! Clean residual mean=-0.000068 rms=0.002205 Jy/beam ! Combined flux in latest and established models = 0.758385 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 48 components and 0.758385 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165491Jy sigma=0.001175 ! Fit after self-cal, rms=0.165490Jy sigma=0.001175 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165490Jy sigma=0.001175 ! Fit after self-cal, rms=0.167602Jy sigma=0.001174 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.555 mas, bmaj=21.38 mas, bpa=0.4821 degrees ! Estimated noise=1623.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00784798 Jy ! Component: 100 - total flux cleaned = 0.00996719 Jy ! Component: 150 - total flux cleaned = 0.010659 Jy ! Component: 200 - total flux cleaned = 0.0107272 Jy ! Total flux subtracted in 200 components = 0.0107272 Jy ! Clean residual min=-0.012492 max=0.008287 Jy/beam ! Clean residual mean=-0.000131 rms=0.003601 Jy/beam ! Combined flux in latest and established models = 0.769112 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 52 components and 0.769112 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.166918Jy sigma=0.001176 ! Fit after self-cal, rms=0.166913Jy sigma=0.001176 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000132285 Jy ! Component: 100 - total flux cleaned = 0.000162445 Jy ! Component: 150 - total flux cleaned = 0.000175074 Jy ! Component: 200 - total flux cleaned = 0.000187598 Jy ! Total flux subtracted in 200 components = 0.000187598 Jy ! Clean residual min=-0.012461 max=0.008255 Jy/beam ! Clean residual mean=-0.000132 rms=0.003600 Jy/beam ! Combined flux in latest and established models = 0.7693 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 55 components and 0.7693 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.166906Jy sigma=0.001176 ! Fit after self-cal, rms=0.166905Jy sigma=0.001176 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.955 mas, bmaj=8.641 mas, bpa=-7.305 degrees ! Estimated noise=1247.03 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.955 x 8.641 at -7.305 degrees (North through East) ! Clean map min=-0.0091267 max=0.68409 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.166905Jy sigma=0.001176 ! Fit after self-cal, rms=0.099887Jy sigma=0.000777 ! Inverting map and beam ! Estimated beam: bmin=2.959 mas, bmaj=8.636 mas, bpa=-7.31 degrees ! Estimated noise=1249.59 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000318569 Jy ! Component: 100 - total flux cleaned = -0.000490639 Jy ! Component: 150 - total flux cleaned = -0.000568744 Jy ! Component: 200 - total flux cleaned = -0.000718122 Jy ! Total flux subtracted in 200 components = -0.000718122 Jy ! Clean residual min=-0.004323 max=0.004531 Jy/beam ! Clean residual mean=-0.000030 rms=0.001087 Jy/beam ! Combined flux in latest and established models = 0.768582 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 59 components and 0.768582 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099729Jy sigma=0.000776 ! Fit after self-cal, rms=0.099729Jy sigma=0.000776 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000144441 Jy ! Component: 100 - total flux cleaned = -0.000210833 Jy ! Component: 150 - total flux cleaned = -0.000274968 Jy ! Component: 200 - total flux cleaned = -0.000337141 Jy ! Total flux subtracted in 200 components = -0.000337141 Jy ! Clean residual min=-0.004096 max=0.004436 Jy/beam ! Clean residual mean=-0.000030 rms=0.001062 Jy/beam ! Combined flux in latest and established models = 0.768245 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 62 components and 0.768245 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099632Jy sigma=0.000776 ! Fit after self-cal, rms=0.099633Jy sigma=0.000776 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099633Jy sigma=0.000776 ! Fit after self-cal, rms=0.099455Jy sigma=0.000775 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.438 mas, bmaj=7.188 mas, bpa=-6.807 degrees ! Estimated noise=1716.94 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.541431 Jy ! Component: 100 - total flux cleaned = 0.660077 Jy ! Component: 150 - total flux cleaned = 0.700896 Jy ! Component: 200 - total flux cleaned = 0.724943 Jy ! Total flux subtracted in 200 components = 0.724943 Jy ! Clean residual min=-0.009516 max=0.013470 Jy/beam ! Clean residual mean=0.000025 rms=0.002680 Jy/beam ! Combined flux in latest and established models = 0.724943 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.724943 Jy ! Inverting map and beam ! Estimated beam: bmin=2.958 mas, bmaj=8.634 mas, bpa=-7.325 degrees ! Estimated noise=1248.07 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0196018 Jy ! Component: 100 - total flux cleaned = 0.0294498 Jy ! Component: 150 - total flux cleaned = 0.0344923 Jy ! Component: 200 - total flux cleaned = 0.0371566 Jy ! Total flux subtracted in 200 components = 0.0371566 Jy ! Clean residual min=-0.004343 max=0.004311 Jy/beam ! Clean residual mean=-0.000011 rms=0.001072 Jy/beam ! Combined flux in latest and established models = 0.7621 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 58 components and 0.7621 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.559 mas, bmaj=21.4 mas, bpa=0.4006 degrees ! Estimated noise=1624.19 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00310624 Jy ! Component: 100 - total flux cleaned = 0.00405361 Jy ! Component: 150 - total flux cleaned = 0.00414571 Jy ! Component: 200 - total flux cleaned = 0.00423114 Jy ! Total flux subtracted in 200 components = 0.00423114 Jy ! Clean residual min=-0.004427 max=0.004227 Jy/beam ! Clean residual mean=-0.000040 rms=0.001240 Jy/beam ! Combined flux in latest and established models = 0.766331 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.942e-05 Jy ! Component: 100 - total flux cleaned = 0.000131187 Jy ! Component: 150 - total flux cleaned = 0.000203366 Jy ! Component: 200 - total flux cleaned = 0.000247757 Jy ! Total flux subtracted in 200 components = 0.000247757 Jy ! Clean residual min=-0.004361 max=0.004102 Jy/beam ! Clean residual mean=-0.000041 rms=0.001212 Jy/beam ! Combined flux in latest and established models = 0.766579 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 66 components and 0.766579 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.958 mas, bmaj=8.634 mas, bpa=-7.325 degrees ! Estimated noise=1248.07 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000750112 Jy ! Component: 100 - total flux cleaned = -0.000922663 Jy ! Component: 150 - total flux cleaned = -0.00101925 Jy ! Component: 200 - total flux cleaned = -0.00107561 Jy ! Total flux subtracted in 200 components = -0.00107561 Jy ! Clean residual min=-0.003961 max=0.004105 Jy/beam ! Clean residual mean=-0.000016 rms=0.001014 Jy/beam ! Combined flux in latest and established models = 0.765503 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 73 components and 0.765503 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099173Jy sigma=0.000774 ! Fit after self-cal, rms=0.099170Jy sigma=0.000774 wmodel J1534-3526_S_2014_01_04_pus_map.mod ! Writing 73 model components to file: J1534-3526_S_2014_01_04_pus_map.mod wobs J1534-3526_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J1534-3526_S_2014_01_04_pus_uvs.fits wwins J1534-3526_S_2014_01_04_pus_map.win ! wwins: Wrote 1 windows to J1534-3526_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000837323 Jy ! Component: 100 - total flux cleaned = 0.00130811 Jy ! Component: 150 - total flux cleaned = 0.00149844 Jy ! Component: 200 - total flux cleaned = 0.00173232 Jy ! Component: 250 - total flux cleaned = 0.00189605 Jy ! Component: 300 - total flux cleaned = 0.0019461 Jy ! Component: 350 - total flux cleaned = 0.00204443 Jy ! Component: 400 - total flux cleaned = 0.00209153 Jy ! Component: 450 - total flux cleaned = 0.00232103 Jy ! Component: 500 - total flux cleaned = 0.00236473 Jy ! Component: 550 - total flux cleaned = 0.00223505 Jy ! Component: 600 - total flux cleaned = 0.00215235 Jy ! Component: 650 - total flux cleaned = 0.00207131 Jy ! Component: 700 - total flux cleaned = 0.00195233 Jy ! Component: 750 - total flux cleaned = 0.00199169 Jy ! Component: 800 - total flux cleaned = 0.00199139 Jy ! Component: 850 - total flux cleaned = 0.00199095 Jy ! Component: 900 - total flux cleaned = 0.00195467 Jy ! Component: 950 - total flux cleaned = 0.00206109 Jy ! Component: 1000 - total flux cleaned = 0.0019562 Jy ! Component: 1050 - total flux cleaned = 0.00192198 Jy ! Component: 1100 - total flux cleaned = 0.00178861 Jy ! Component: 1150 - total flux cleaned = 0.00175659 Jy ! Component: 1200 - total flux cleaned = 0.00178851 Jy ! Component: 1250 - total flux cleaned = 0.00178791 Jy ! Component: 1300 - total flux cleaned = 0.00163205 Jy ! Component: 1350 - total flux cleaned = 0.00166331 Jy ! Component: 1400 - total flux cleaned = 0.00160282 Jy ! Component: 1450 - total flux cleaned = 0.00160271 Jy ! Component: 1500 - total flux cleaned = 0.0015437 Jy ! Component: 1550 - total flux cleaned = 0.0015433 Jy ! Component: 1600 - total flux cleaned = 0.00142957 Jy ! Component: 1650 - total flux cleaned = 0.00140179 Jy ! Component: 1700 - total flux cleaned = 0.00140184 Jy ! Component: 1750 - total flux cleaned = 0.00129286 Jy ! Component: 1800 - total flux cleaned = 0.00121269 Jy ! Component: 1850 - total flux cleaned = 0.00113313 Jy ! Component: 1900 - total flux cleaned = 0.00105433 Jy ! Component: 1950 - total flux cleaned = 0.00102836 Jy ! Component: 2000 - total flux cleaned = 0.000926111 Jy ! Component: 2050 - total flux cleaned = 0.000875856 Jy ! Component: 2100 - total flux cleaned = 0.000801103 Jy ! Component: 2150 - total flux cleaned = 0.000776562 Jy ! Component: 2200 - total flux cleaned = 0.000703438 Jy ! Component: 2250 - total flux cleaned = 0.000679447 Jy ! Component: 2300 - total flux cleaned = 0.000655861 Jy ! Component: 2350 - total flux cleaned = 0.000585663 Jy ! Component: 2400 - total flux cleaned = 0.000632391 Jy ! Component: 2450 - total flux cleaned = 0.000586064 Jy ! Component: 2500 - total flux cleaned = 0.00047207 Jy ! Component: 2550 - total flux cleaned = 0.000471994 Jy ! Component: 2600 - total flux cleaned = 0.000382575 Jy ! Component: 2650 - total flux cleaned = 0.000360482 Jy ! Component: 2700 - total flux cleaned = 0.000272893 Jy ! Component: 2750 - total flux cleaned = 0.000251218 Jy ! Component: 2800 - total flux cleaned = 0.000164822 Jy ! Component: 2850 - total flux cleaned = 5.75086e-05 Jy ! Component: 2900 - total flux cleaned = 3.6102e-05 Jy ! Component: 2950 - total flux cleaned = -6.96492e-05 Jy ! Component: 3000 - total flux cleaned = -9.07028e-05 Jy ! Component: 3050 - total flux cleaned = -0.000111638 Jy ! Component: 3100 - total flux cleaned = -0.000173842 Jy ! Component: 3150 - total flux cleaned = -0.000153192 Jy ! Component: 3200 - total flux cleaned = -0.000194297 Jy ! Component: 3250 - total flux cleaned = -0.000214747 Jy ! Component: 3300 - total flux cleaned = -0.000235072 Jy ! Component: 3350 - total flux cleaned = -0.000194481 Jy ! Component: 3400 - total flux cleaned = -0.000275078 Jy ! Component: 3450 - total flux cleaned = -0.000234829 Jy ! Component: 3500 - total flux cleaned = -0.000274739 Jy ! Component: 3550 - total flux cleaned = -0.000314726 Jy ! Component: 3600 - total flux cleaned = -0.000374665 Jy ! Component: 3650 - total flux cleaned = -0.000454055 Jy ! Component: 3700 - total flux cleaned = -0.000473893 Jy ! Component: 3750 - total flux cleaned = -0.00055289 Jy ! Component: 3800 - total flux cleaned = -0.000552843 Jy ! Component: 3850 - total flux cleaned = -0.000611728 Jy ! Component: 3900 - total flux cleaned = -0.000572477 Jy ! Component: 3950 - total flux cleaned = -0.000631072 Jy ! Component: 4000 - total flux cleaned = -0.000631087 Jy ! Component: 4050 - total flux cleaned = -0.000631149 Jy ! Total flux subtracted in 4096 components = -0.000670088 Jy ! Clean residual min=-0.001226 max=0.001159 Jy/beam ! Clean residual mean=0.000005 rms=0.000331 Jy/beam ! Combined flux in latest and established models = 0.764833 Jy keep ! Adding 247 model components to the UV plane model. ! The established model now contains 320 components and 0.764834 Jy ![Exited script file: muppet] wmap "J1534-3526_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.958 x 8.634 at -7.325 degrees (North through East) ! Clean map min=-0.0029234 max=0.69233 Jy/beam ! Writing clean map to FITS file: J1534-3526_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.692329 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000331167 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.143501 0.143501 0.287002 0.574005 1.14801 2.29602 4.59204 9.18408 18.3682 36.7363 73.4726 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.692 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.958 x 8.634 at -7.325 degrees (North through East) ! Clean map min=-0.0029234 max=0.69233 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1534-3526_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:30:56 2017