! Started logfile: J1532+2344_S_2015_01_22_pus_uvs.log on Tue Jan 3 22:57:44 2017 obs J1532+2344_S_2015_01_22_pus_uva.fits ! Reading UV FITS file: J1532+2344_S_2015_01_22_pus_uva.fits ! AN table 1: 29 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.8 visibilities/baseline/integration-bin. ! Found source: J1532+2344 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 281 lines of history. ! ! Reading 4176 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1532+2344_S_2015_01_22_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.894009Jy sigma=0.011434 ! Fit after self-cal, rms=0.884243Jy sigma=0.011316 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.606 mas, bmaj=7.006 mas, bpa=10.21 degrees ! Estimated noise=1248.43 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0900697 Jy ! Component: 100 - total flux cleaned = 0.111684 Jy ! Total flux subtracted in 100 components = 0.111684 Jy ! Clean residual min=-0.006392 max=0.008720 Jy/beam ! Clean residual mean=0.000000 rms=0.001779 Jy/beam ! Combined flux in latest and established models = 0.111684 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.111684 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067069Jy sigma=0.000798 ! Fit after self-cal, rms=0.067069Jy sigma=0.000798 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.015 mas, bmaj=7.553 mas, bpa=9.167 degrees ! Estimated noise=868.448 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00991158 Jy ! Component: 100 - total flux cleaned = 0.0145399 Jy ! Component: 150 - total flux cleaned = 0.0170375 Jy ! Component: 200 - total flux cleaned = 0.0186626 Jy ! Total flux subtracted in 200 components = 0.0186626 Jy ! Clean residual min=-0.003842 max=0.003264 Jy/beam ! Clean residual mean=-0.000003 rms=0.000929 Jy/beam ! Combined flux in latest and established models = 0.130347 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 32 components and 0.130347 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065565Jy sigma=0.000781 ! Fit after self-cal, rms=0.065555Jy sigma=0.000781 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.00* HN 0.95 KP 1.10 ! LA 1.06 MK 0.99 NL 1.06 OV 0.98 ! PT 1.04 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* HN 1.05 KP 1.01 ! LA 1.06 MK 1.05 NL 0.98 OV 0.98 ! PT 1.02 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 1.00* HN 1.00 KP 0.87 ! LA 0.82 MK 1.05 NL 1.13 OV 0.96 ! PT 1.02 SC 1.06 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.00* HN 1.00 KP 0.82 ! LA 0.91 MK 1.04 NL 1.01 OV 1.00 ! PT 1.03 SC 1.00 ! ! ! Fit before self-cal, rms=0.065555Jy sigma=0.000781 ! Fit after self-cal, rms=0.063405Jy sigma=0.000767 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.044 mas, bmaj=7.572 mas, bpa=9.22 degrees ! Estimated noise=865.403 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00054241 Jy ! Component: 100 - total flux cleaned = -0.000460708 Jy ! Component: 150 - total flux cleaned = -0.000418266 Jy ! Component: 200 - total flux cleaned = -0.000381493 Jy ! Total flux subtracted in 200 components = -0.000381493 Jy ! Clean residual min=-0.002472 max=0.002501 Jy/beam ! Clean residual mean=0.000000 rms=0.000630 Jy/beam ! Combined flux in latest and established models = 0.129965 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 41 components and 0.129965 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063378Jy sigma=0.000767 ! Fit after self-cal, rms=0.063376Jy sigma=0.000766 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063376Jy sigma=0.000766 ! Fit after self-cal, rms=0.063456Jy sigma=0.000766 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.051 mas, bmaj=7.578 mas, bpa=9.215 degrees ! Estimated noise=865.518 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000420087 Jy ! Component: 100 - total flux cleaned = -0.000346993 Jy ! Component: 150 - total flux cleaned = -0.000318793 Jy ! Component: 200 - total flux cleaned = -0.000269407 Jy ! Total flux subtracted in 200 components = -0.000269407 Jy ! Clean residual min=-0.002425 max=0.002539 Jy/beam ! Clean residual mean=0.000000 rms=0.000621 Jy/beam ! Combined flux in latest and established models = 0.129696 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 43 components and 0.129696 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063443Jy sigma=0.000766 ! Fit after self-cal, rms=0.063444Jy sigma=0.000766 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.72402e-05 Jy ! Component: 100 - total flux cleaned = 5.98621e-05 Jy ! Component: 150 - total flux cleaned = 0.000105729 Jy ! Component: 200 - total flux cleaned = 0.000122308 Jy ! Total flux subtracted in 200 components = 0.000122308 Jy ! Clean residual min=-0.002412 max=0.002559 Jy/beam ! Clean residual mean=-0.000000 rms=0.000619 Jy/beam ! Combined flux in latest and established models = 0.129818 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 50 components and 0.129818 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063440Jy sigma=0.000766 ! Fit after self-cal, rms=0.063439Jy sigma=0.000766 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063439Jy sigma=0.000766 ! Fit after self-cal, rms=0.063542Jy sigma=0.000766 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.056 mas, bmaj=7.581 mas, bpa=9.214 degrees ! Estimated noise=866.149 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000150849 Jy ! Component: 100 - total flux cleaned = -0.000172552 Jy ! Component: 150 - total flux cleaned = -0.000181096 Jy ! Component: 200 - total flux cleaned = -0.000181282 Jy ! Total flux subtracted in 200 components = -0.000181282 Jy ! Clean residual min=-0.002378 max=0.002586 Jy/beam ! Clean residual mean=-0.000000 rms=0.000615 Jy/beam ! Combined flux in latest and established models = 0.129637 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 52 components and 0.129637 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063538Jy sigma=0.000766 ! Fit after self-cal, rms=0.063538Jy sigma=0.000766 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.16442e-06 Jy ! Component: 100 - total flux cleaned = 2.32035e-05 Jy ! Component: 150 - total flux cleaned = 3.49937e-05 Jy ! Component: 200 - total flux cleaned = 4.58099e-05 Jy ! Total flux subtracted in 200 components = 4.58099e-05 Jy ! Clean residual min=-0.002371 max=0.002589 Jy/beam ! Clean residual mean=-0.000000 rms=0.000614 Jy/beam ! Combined flux in latest and established models = 0.129683 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 58 components and 0.129683 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063537Jy sigma=0.000766 ! Fit after self-cal, rms=0.063537Jy sigma=0.000766 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063537Jy sigma=0.000766 ! Fit after self-cal, rms=0.063605Jy sigma=0.000766 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.567 mas, bmaj=10.18 mas, bpa=-1.067 degrees ! Estimated noise=1125.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.66184e-05 Jy ! Component: 100 - total flux cleaned = 3.52217e-05 Jy ! Component: 150 - total flux cleaned = 6.51925e-05 Jy ! Component: 200 - total flux cleaned = 0.000102275 Jy ! Total flux subtracted in 200 components = 0.000102275 Jy ! Clean residual min=-0.002441 max=0.003015 Jy/beam ! Clean residual mean=0.000000 rms=0.000841 Jy/beam ! Combined flux in latest and established models = 0.129785 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 64 components and 0.129785 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063606Jy sigma=0.000766 ! Fit after self-cal, rms=0.063607Jy sigma=0.000766 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.72928e-05 Jy ! Component: 100 - total flux cleaned = 1.71769e-05 Jy ! Component: 150 - total flux cleaned = 2.26593e-05 Jy ! Component: 200 - total flux cleaned = 2.76978e-05 Jy ! Total flux subtracted in 200 components = 2.76978e-05 Jy ! Clean residual min=-0.002433 max=0.003007 Jy/beam ! Clean residual mean=0.000000 rms=0.000840 Jy/beam ! Combined flux in latest and established models = 0.129813 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 69 components and 0.129813 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063608Jy sigma=0.000766 ! Fit after self-cal, rms=0.063608Jy sigma=0.000766 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.06 mas, bmaj=7.583 mas, bpa=9.212 degrees ! Estimated noise=866.53 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.06 x 7.583 at 9.212 degrees (North through East) ! Clean map min=-0.0022097 max=0.11607 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.64 mas, bmaj=7.026 mas, bpa=10.32 degrees ! Estimated noise=1257.83 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0906544 Jy ! Component: 100 - total flux cleaned = 0.111979 Jy ! Component: 150 - total flux cleaned = 0.120734 Jy ! Component: 200 - total flux cleaned = 0.125183 Jy ! Total flux subtracted in 200 components = 0.125183 Jy ! Clean residual min=-0.004512 max=0.003754 Jy/beam ! Clean residual mean=0.000001 rms=0.001218 Jy/beam ! Combined flux in latest and established models = 0.125183 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.125183 Jy ! Inverting map and beam ! Estimated beam: bmin=3.06 mas, bmaj=7.583 mas, bpa=9.212 degrees ! Estimated noise=866.53 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00197138 Jy ! Component: 100 - total flux cleaned = 0.00259768 Jy ! Component: 150 - total flux cleaned = 0.00290347 Jy ! Component: 200 - total flux cleaned = 0.00307175 Jy ! Total flux subtracted in 200 components = 0.00307175 Jy ! Clean residual min=-0.002459 max=0.002445 Jy/beam ! Clean residual mean=0.000001 rms=0.000644 Jy/beam ! Combined flux in latest and established models = 0.128255 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 22 components and 0.128255 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.567 mas, bmaj=10.18 mas, bpa=-1.067 degrees ! Estimated noise=1125.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000841441 Jy ! Component: 100 - total flux cleaned = 0.000967391 Jy ! Component: 150 - total flux cleaned = 0.00107439 Jy ! Component: 200 - total flux cleaned = 0.00116504 Jy ! Total flux subtracted in 200 components = 0.00116504 Jy ! Clean residual min=-0.002472 max=0.002928 Jy/beam ! Clean residual mean=0.000001 rms=0.000846 Jy/beam ! Combined flux in latest and established models = 0.12942 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.79567e-05 Jy ! Component: 100 - total flux cleaned = 0.000145425 Jy ! Component: 150 - total flux cleaned = 0.000175322 Jy ! Component: 200 - total flux cleaned = 0.000203086 Jy ! Total flux subtracted in 200 components = 0.000203086 Jy ! Clean residual min=-0.002449 max=0.002943 Jy/beam ! Clean residual mean=0.000000 rms=0.000842 Jy/beam ! Combined flux in latest and established models = 0.129623 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 36 components and 0.129623 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.06 mas, bmaj=7.583 mas, bpa=9.212 degrees ! Estimated noise=866.53 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000401948 Jy ! Component: 100 - total flux cleaned = -0.000405366 Jy ! Component: 150 - total flux cleaned = -0.000329966 Jy ! Component: 200 - total flux cleaned = -0.000264966 Jy ! Total flux subtracted in 200 components = -0.000264966 Jy ! Clean residual min=-0.002406 max=0.002574 Jy/beam ! Clean residual mean=-0.000000 rms=0.000623 Jy/beam ! Combined flux in latest and established models = 0.129358 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 45 components and 0.129358 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063628Jy sigma=0.000766 ! Fit after self-cal, rms=0.063622Jy sigma=0.000766 wmodel J1532+2344_S_2015_01_22_pus_map.mod ! Writing 45 model components to file: J1532+2344_S_2015_01_22_pus_map.mod wobs J1532+2344_S_2015_01_22_pus_uvs.fits ! Writing UV FITS file: J1532+2344_S_2015_01_22_pus_uvs.fits wwins J1532+2344_S_2015_01_22_pus_map.win ! wwins: Wrote 1 windows to J1532+2344_S_2015_01_22_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000160097 Jy ! Component: 100 - total flux cleaned = 0.000120013 Jy ! Component: 150 - total flux cleaned = 0.000120653 Jy ! Component: 200 - total flux cleaned = -1.88202e-05 Jy ! Component: 250 - total flux cleaned = -0.000118508 Jy ! Component: 300 - total flux cleaned = -0.000246802 Jy ! Component: 350 - total flux cleaned = -0.000401817 Jy ! Component: 400 - total flux cleaned = -0.000581432 Jy ! Component: 450 - total flux cleaned = -0.000784225 Jy ! Component: 500 - total flux cleaned = -0.000896403 Jy ! Component: 550 - total flux cleaned = -0.00103347 Jy ! Component: 600 - total flux cleaned = -0.00116686 Jy ! Component: 650 - total flux cleaned = -0.00134962 Jy ! Component: 700 - total flux cleaned = -0.00152816 Jy ! Component: 750 - total flux cleaned = -0.00172781 Jy ! Component: 800 - total flux cleaned = -0.00189843 Jy ! Component: 850 - total flux cleaned = -0.0020415 Jy ! Component: 900 - total flux cleaned = -0.00213474 Jy ! Component: 950 - total flux cleaned = -0.00220418 Jy ! Component: 1000 - total flux cleaned = -0.00233938 Jy ! Component: 1050 - total flux cleaned = -0.00249329 Jy ! Component: 1100 - total flux cleaned = -0.00262279 Jy ! Component: 1150 - total flux cleaned = -0.00274973 Jy ! Component: 1200 - total flux cleaned = -0.00281208 Jy ! Component: 1250 - total flux cleaned = -0.00287369 Jy ! Component: 1300 - total flux cleaned = -0.00297456 Jy ! Component: 1350 - total flux cleaned = -0.003014 Jy ! Component: 1400 - total flux cleaned = -0.00307197 Jy ! Component: 1450 - total flux cleaned = -0.00316741 Jy ! Component: 1500 - total flux cleaned = -0.0033361 Jy ! Component: 1550 - total flux cleaned = -0.00331785 Jy ! Component: 1600 - total flux cleaned = -0.00346373 Jy ! Component: 1650 - total flux cleaned = -0.00353541 Jy ! Component: 1700 - total flux cleaned = -0.00357053 Jy ! Component: 1750 - total flux cleaned = -0.00360541 Jy ! Component: 1800 - total flux cleaned = -0.0035885 Jy ! Component: 1850 - total flux cleaned = -0.00367349 Jy ! Component: 1900 - total flux cleaned = -0.00369038 Jy ! Component: 1950 - total flux cleaned = -0.00373969 Jy ! Component: 2000 - total flux cleaned = -0.00373969 Jy ! Component: 2050 - total flux cleaned = -0.00377188 Jy ! Component: 2100 - total flux cleaned = -0.00378787 Jy ! Component: 2150 - total flux cleaned = -0.00383495 Jy ! Component: 2200 - total flux cleaned = -0.00385053 Jy ! Component: 2250 - total flux cleaned = -0.00389665 Jy ! Component: 2300 - total flux cleaned = -0.00389679 Jy ! Component: 2350 - total flux cleaned = -0.00394181 Jy ! Component: 2400 - total flux cleaned = -0.0039716 Jy ! Component: 2450 - total flux cleaned = -0.00398631 Jy ! Component: 2500 - total flux cleaned = -0.0040009 Jy ! Component: 2550 - total flux cleaned = -0.00405822 Jy ! Component: 2600 - total flux cleaned = -0.004044 Jy ! Component: 2650 - total flux cleaned = -0.0040721 Jy ! Component: 2700 - total flux cleaned = -0.00408601 Jy ! Component: 2750 - total flux cleaned = -0.00414089 Jy ! Component: 2800 - total flux cleaned = -0.00411374 Jy ! Component: 2850 - total flux cleaned = -0.00411361 Jy ! Component: 2900 - total flux cleaned = -0.0041269 Jy ! Component: 2950 - total flux cleaned = -0.00413999 Jy ! Component: 3000 - total flux cleaned = -0.00411387 Jy ! Component: 3050 - total flux cleaned = -0.00407509 Jy ! Component: 3100 - total flux cleaned = -0.00407514 Jy ! Component: 3150 - total flux cleaned = -0.00401163 Jy ! Component: 3200 - total flux cleaned = -0.00397378 Jy ! Component: 3250 - total flux cleaned = -0.00393632 Jy ! Component: 3300 - total flux cleaned = -0.00391161 Jy ! Component: 3350 - total flux cleaned = -0.00386218 Jy ! Component: 3400 - total flux cleaned = -0.00380097 Jy ! Component: 3450 - total flux cleaned = -0.00374016 Jy ! Component: 3500 - total flux cleaned = -0.00369183 Jy ! Component: 3550 - total flux cleaned = -0.00364381 Jy ! Component: 3600 - total flux cleaned = -0.00360797 Jy ! Component: 3650 - total flux cleaned = -0.00359611 Jy ! Component: 3700 - total flux cleaned = -0.00356077 Jy ! Component: 3750 - total flux cleaned = -0.0035255 Jy ! Component: 3800 - total flux cleaned = -0.00347886 Jy ! Component: 3850 - total flux cleaned = -0.00347884 Jy ! Component: 3900 - total flux cleaned = -0.00343272 Jy ! Component: 3950 - total flux cleaned = -0.00338697 Jy ! Component: 4000 - total flux cleaned = -0.00338702 Jy ! Component: 4050 - total flux cleaned = -0.003353 Jy ! Total flux subtracted in 4096 components = -0.00331915 Jy ! Clean residual min=-0.000600 max=0.000644 Jy/beam ! Clean residual mean=-0.000001 rms=0.000194 Jy/beam ! Combined flux in latest and established models = 0.126039 Jy keep ! Adding 270 model components to the UV plane model. ! The established model now contains 315 components and 0.126039 Jy ![Exited script file: muppet] wmap "J1532+2344_S_2015_01_22_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.06 x 7.583 at 9.212 degrees (North through East) ! Clean map min=-0.0018204 max=0.11624 Jy/beam ! Writing clean map to FITS file: J1532+2344_S_2015_01_22_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.116243 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000184173 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.475314 0.475314 0.950627 1.90125 3.80251 7.60502 15.21 30.4201 60.8401 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.116 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.06 x 7.583 at 9.212 degrees (North through East) ! Clean map min=-0.0018204 max=0.11624 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1532+2344_S_2015_01_22_pus_uvs.log closed on Tue Jan 3 22:57:49 2017