! Started logfile: J1530+3758_S_2014_06_09_pus_uvs.log on Wed Nov 16 19:57:21 2016 obs J1530+3758_S_2014_06_09_pus_uva.fits ! Reading UV FITS file: J1530+3758_S_2014_06_09_pus_uva.fits ! AN table 1: 116 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.777011 visibilities/baseline/integration-bin. ! Found source: J1530+3758 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 336 lines of history. ! ! Reading 16224 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1530+3758_S_2014_06_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 141 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 141 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 141 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 141 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.907682Jy sigma=0.011363 ! Fit after self-cal, rms=0.894012Jy sigma=0.011192 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.901 mas, bmaj=4.668 mas, bpa=-7.926 degrees ! Estimated noise=799.762 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0812272 Jy ! Component: 100 - total flux cleaned = 0.0995115 Jy ! Total flux subtracted in 100 components = 0.0995115 Jy ! Clean residual min=-0.004014 max=0.006734 Jy/beam ! Clean residual mean=0.000003 rms=0.001069 Jy/beam ! Combined flux in latest and established models = 0.0995115 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0995115 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069882Jy sigma=0.000813 ! Fit after self-cal, rms=0.069878Jy sigma=0.000813 ! Inverting map ! Added new window around map position (-1.5, -12.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0078267 Jy ! Component: 100 - total flux cleaned = 0.0129732 Jy ! Total flux subtracted in 100 components = 0.0129732 Jy ! Clean residual min=-0.003272 max=0.004115 Jy/beam ! Clean residual mean=0.000003 rms=0.000827 Jy/beam ! Combined flux in latest and established models = 0.112485 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 22 components and 0.112485 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068688Jy sigma=0.000797 ! Fit after self-cal, rms=0.068662Jy sigma=0.000797 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.714 mas, bmaj=5.842 mas, bpa=-9.076 degrees ! Estimated noise=450.87 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00509899 Jy ! Component: 100 - total flux cleaned = 0.00811724 Jy ! Component: 150 - total flux cleaned = 0.00956932 Jy ! Component: 200 - total flux cleaned = 0.0101158 Jy ! Total flux subtracted in 200 components = 0.0101158 Jy ! Clean residual min=-0.002116 max=0.002171 Jy/beam ! Clean residual mean=0.000008 rms=0.000544 Jy/beam ! Combined flux in latest and established models = 0.1226 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 50 components and 0.1226 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068195Jy sigma=0.000792 ! Fit after self-cal, rms=0.068200Jy sigma=0.000792 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.85 HN 0.96 KP 1.06 ! LA 1.17 MK 1.03 NL 0.96 OV 0.96 ! PT 1.00 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 0.99 KP 1.03 ! LA 1.13 MK 1.07 NL 1.06 OV 1.00 ! PT 0.99 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.17 HN 1.00 KP 0.92 ! LA 0.90 MK 1.12 NL 0.98 OV 0.90 ! PT 0.95 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 0.96 KP 0.87 ! LA 0.85 MK 1.10 NL 1.04 OV 0.99 ! PT 1.00 SC 0.94 ! ! ! Fit before self-cal, rms=0.068200Jy sigma=0.000792 ! Fit after self-cal, rms=0.066283Jy sigma=0.000778 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.767 mas, bmaj=5.863 mas, bpa=-8.142 degrees ! Estimated noise=448.214 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000402828 Jy ! Component: 100 - total flux cleaned = 0.000403241 Jy ! Component: 150 - total flux cleaned = 0.000449427 Jy ! Component: 200 - total flux cleaned = 0.00052316 Jy ! Total flux subtracted in 200 components = 0.00052316 Jy ! Clean residual min=-0.001435 max=0.001582 Jy/beam ! Clean residual mean=0.000000 rms=0.000335 Jy/beam ! Combined flux in latest and established models = 0.123124 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 65 components and 0.123124 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066254Jy sigma=0.000778 ! Fit after self-cal, rms=0.066266Jy sigma=0.000778 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066266Jy sigma=0.000778 ! Fit after self-cal, rms=0.066185Jy sigma=0.000777 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.766 mas, bmaj=5.875 mas, bpa=-8.545 degrees ! Estimated noise=447.602 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.71259e-05 Jy ! Component: 100 - total flux cleaned = 1.17894e-05 Jy ! Component: 150 - total flux cleaned = -2.36305e-05 Jy ! Component: 200 - total flux cleaned = -5.4051e-05 Jy ! Total flux subtracted in 200 components = -5.4051e-05 Jy ! Clean residual min=-0.001376 max=0.001549 Jy/beam ! Clean residual mean=-0.000000 rms=0.000314 Jy/beam ! Combined flux in latest and established models = 0.12307 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 76 components and 0.12307 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066179Jy sigma=0.000777 ! Fit after self-cal, rms=0.066179Jy sigma=0.000777 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-73, -108.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00115512 Jy ! Component: 100 - total flux cleaned = 0.00118152 Jy ! Component: 150 - total flux cleaned = 0.00126132 Jy ! Component: 200 - total flux cleaned = 0.00132969 Jy ! Total flux subtracted in 200 components = 0.00132969 Jy ! Clean residual min=-0.001249 max=0.001167 Jy/beam ! Clean residual mean=-0.000001 rms=0.000294 Jy/beam ! Combined flux in latest and established models = 0.124399 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 97 components and 0.124399 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066149Jy sigma=0.000777 ! Fit after self-cal, rms=0.066148Jy sigma=0.000777 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066148Jy sigma=0.000777 ! Fit after self-cal, rms=0.066063Jy sigma=0.000777 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.771 mas, bmaj=5.879 mas, bpa=-8.456 degrees ! Estimated noise=446.991 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000413396 Jy ! Component: 100 - total flux cleaned = 0.000446549 Jy ! Component: 150 - total flux cleaned = 0.000446391 Jy ! Component: 200 - total flux cleaned = 0.000433333 Jy ! Total flux subtracted in 200 components = 0.000433333 Jy ! Clean residual min=-0.001206 max=0.001123 Jy/beam ! Clean residual mean=-0.000001 rms=0.000286 Jy/beam ! Combined flux in latest and established models = 0.124833 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 109 components and 0.124833 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066054Jy sigma=0.000777 ! Fit after self-cal, rms=0.066055Jy sigma=0.000777 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.10758e-05 Jy ! Component: 100 - total flux cleaned = 8.35033e-05 Jy ! Component: 150 - total flux cleaned = 8.32754e-05 Jy ! Component: 200 - total flux cleaned = 7.21141e-05 Jy ! Total flux subtracted in 200 components = 7.21141e-05 Jy ! Clean residual min=-0.001182 max=0.001121 Jy/beam ! Clean residual mean=-0.000001 rms=0.000284 Jy/beam ! Combined flux in latest and established models = 0.124905 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 117 components and 0.124905 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066050Jy sigma=0.000777 ! Fit after self-cal, rms=0.066050Jy sigma=0.000777 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066050Jy sigma=0.000777 ! Fit after self-cal, rms=0.066011Jy sigma=0.000777 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.806 mas, bmaj=10.52 mas, bpa=-8.506 degrees ! Estimated noise=534.908 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.36022e-05 Jy ! Component: 100 - total flux cleaned = 9.44348e-05 Jy ! Component: 150 - total flux cleaned = 8.50117e-05 Jy ! Component: 200 - total flux cleaned = 7.60752e-05 Jy ! Total flux subtracted in 200 components = 7.60752e-05 Jy ! Clean residual min=-0.001386 max=0.001164 Jy/beam ! Clean residual mean=-0.000002 rms=0.000337 Jy/beam ! Combined flux in latest and established models = 0.124981 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 136 components and 0.124981 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066010Jy sigma=0.000777 ! Fit after self-cal, rms=0.066010Jy sigma=0.000777 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.0772e-05 Jy ! Component: 100 - total flux cleaned = 1.25585e-05 Jy ! Component: 150 - total flux cleaned = 5.10028e-06 Jy ! Component: 200 - total flux cleaned = -1.62481e-06 Jy ! Total flux subtracted in 200 components = -1.62481e-06 Jy ! Clean residual min=-0.001369 max=0.001165 Jy/beam ! Clean residual mean=-0.000002 rms=0.000335 Jy/beam ! Combined flux in latest and established models = 0.124979 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 139 components and 0.124979 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066010Jy sigma=0.000777 ! Fit after self-cal, rms=0.066010Jy sigma=0.000777 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.774 mas, bmaj=5.882 mas, bpa=-8.414 degrees ! Estimated noise=446.678 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.774 x 5.882 at -8.414 degrees (North through East) ! Clean map min=-0.0011221 max=0.10565 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.946 mas, bmaj=4.689 mas, bpa=-7.015 degrees ! Estimated noise=799.997 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0810808 Jy ! Component: 100 - total flux cleaned = 0.0991904 Jy ! Component: 150 - total flux cleaned = 0.10664 Jy ! Component: 200 - total flux cleaned = 0.111217 Jy ! Total flux subtracted in 200 components = 0.111217 Jy ! Clean residual min=-0.002454 max=0.002758 Jy/beam ! Clean residual mean=-0.000001 rms=0.000618 Jy/beam ! Combined flux in latest and established models = 0.111217 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.111217 Jy ! Inverting map and beam ! Estimated beam: bmin=3.774 mas, bmaj=5.882 mas, bpa=-8.414 degrees ! Estimated noise=446.678 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00445597 Jy ! Component: 100 - total flux cleaned = 0.00713197 Jy ! Component: 150 - total flux cleaned = 0.00905038 Jy ! Component: 200 - total flux cleaned = 0.0104573 Jy ! Total flux subtracted in 200 components = 0.0104573 Jy ! Clean residual min=-0.001309 max=0.001183 Jy/beam ! Clean residual mean=-0.000001 rms=0.000324 Jy/beam ! Combined flux in latest and established models = 0.121674 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 53 components and 0.121674 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.806 mas, bmaj=10.52 mas, bpa=-8.506 degrees ! Estimated noise=534.908 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00140811 Jy ! Component: 100 - total flux cleaned = 0.00213818 Jy ! Component: 150 - total flux cleaned = 0.00243853 Jy ! Component: 200 - total flux cleaned = 0.00258109 Jy ! Total flux subtracted in 200 components = 0.00258109 Jy ! Clean residual min=-0.001427 max=0.001220 Jy/beam ! Clean residual mean=-0.000002 rms=0.000339 Jy/beam ! Combined flux in latest and established models = 0.124256 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000105537 Jy ! Component: 100 - total flux cleaned = 0.000152519 Jy ! Component: 150 - total flux cleaned = 0.000194981 Jy ! Component: 200 - total flux cleaned = 0.000221093 Jy ! Total flux subtracted in 200 components = 0.000221093 Jy ! Clean residual min=-0.001390 max=0.001214 Jy/beam ! Clean residual mean=-0.000002 rms=0.000334 Jy/beam ! Combined flux in latest and established models = 0.124477 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 93 components and 0.124477 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.774 mas, bmaj=5.882 mas, bpa=-8.414 degrees ! Estimated noise=446.678 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.89071e-05 Jy ! Component: 100 - total flux cleaned = 0.000119901 Jy ! Component: 150 - total flux cleaned = 0.000155779 Jy ! Component: 200 - total flux cleaned = 0.000155628 Jy ! Total flux subtracted in 200 components = 0.000155628 Jy ! Clean residual min=-0.001122 max=0.001130 Jy/beam ! Clean residual mean=-0.000001 rms=0.000284 Jy/beam ! Combined flux in latest and established models = 0.124632 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 109 components and 0.124632 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066018Jy sigma=0.000777 ! Fit after self-cal, rms=0.066014Jy sigma=0.000777 wmodel J1530+3758_S_2014_06_09_pus_map.mod ! Writing 109 model components to file: J1530+3758_S_2014_06_09_pus_map.mod wobs J1530+3758_S_2014_06_09_pus_uvs.fits ! Writing UV FITS file: J1530+3758_S_2014_06_09_pus_uvs.fits wwins J1530+3758_S_2014_06_09_pus_map.win ! wwins: Wrote 3 windows to J1530+3758_S_2014_06_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000188093 Jy ! Component: 100 - total flux cleaned = -0.00022719 Jy ! Component: 150 - total flux cleaned = -0.00026422 Jy ! Component: 200 - total flux cleaned = -0.000246226 Jy ! Component: 250 - total flux cleaned = -0.000194321 Jy ! Component: 300 - total flux cleaned = -0.000143948 Jy ! Component: 350 - total flux cleaned = -9.47942e-05 Jy ! Component: 400 - total flux cleaned = -4.70243e-05 Jy ! Component: 450 - total flux cleaned = -1.56608e-05 Jy ! Component: 500 - total flux cleaned = 4.49873e-05 Jy ! Component: 550 - total flux cleaned = 5.99292e-05 Jy ! Component: 600 - total flux cleaned = 0.00011847 Jy ! Component: 650 - total flux cleaned = 0.000175589 Jy ! Component: 700 - total flux cleaned = 0.000189522 Jy ! Component: 750 - total flux cleaned = 0.000203428 Jy ! Component: 800 - total flux cleaned = 0.000230777 Jy ! Component: 850 - total flux cleaned = 0.000217257 Jy ! Component: 900 - total flux cleaned = 0.000204237 Jy ! Component: 950 - total flux cleaned = 0.000216932 Jy ! Component: 1000 - total flux cleaned = 0.000191495 Jy ! Component: 1050 - total flux cleaned = 0.000141478 Jy ! Component: 1100 - total flux cleaned = 0.000129179 Jy ! Component: 1150 - total flux cleaned = 0.00014133 Jy ! Component: 1200 - total flux cleaned = 0.000117214 Jy ! Component: 1250 - total flux cleaned = 9.3598e-05 Jy ! Component: 1300 - total flux cleaned = 8.19446e-05 Jy ! Component: 1350 - total flux cleaned = 3.56072e-05 Jy ! Component: 1400 - total flux cleaned = 3.57817e-05 Jy ! Component: 1450 - total flux cleaned = 5.82663e-05 Jy ! Component: 1500 - total flux cleaned = 2.12556e-06 Jy ! Component: 1550 - total flux cleaned = -8.82355e-06 Jy ! Component: 1600 - total flux cleaned = -8.82572e-06 Jy ! Component: 1650 - total flux cleaned = -3.06485e-05 Jy ! Component: 1700 - total flux cleaned = -6.29865e-05 Jy ! Component: 1750 - total flux cleaned = -7.38173e-05 Jy ! Component: 1800 - total flux cleaned = -9.49481e-05 Jy ! Component: 1850 - total flux cleaned = -9.49753e-05 Jy ! Component: 1900 - total flux cleaned = -8.46587e-05 Jy ! Component: 1950 - total flux cleaned = -0.000105148 Jy ! Component: 2000 - total flux cleaned = -7.46671e-05 Jy ! Component: 2050 - total flux cleaned = -6.45917e-05 Jy ! Component: 2100 - total flux cleaned = -2.46297e-05 Jy ! Component: 2150 - total flux cleaned = 1.50441e-05 Jy ! Component: 2200 - total flux cleaned = 3.45354e-05 Jy ! Component: 2250 - total flux cleaned = 0.000112278 Jy ! Component: 2300 - total flux cleaned = 0.000112121 Jy ! Component: 2350 - total flux cleaned = 0.00015039 Jy ! Component: 2400 - total flux cleaned = 0.00014083 Jy ! Component: 2450 - total flux cleaned = 0.00017859 Jy ! Component: 2500 - total flux cleaned = 0.00020666 Jy ! Component: 2550 - total flux cleaned = 0.000253109 Jy ! Component: 2600 - total flux cleaned = 0.000262167 Jy ! Component: 2650 - total flux cleaned = 0.000289549 Jy ! Component: 2700 - total flux cleaned = 0.000289571 Jy ! Component: 2750 - total flux cleaned = 0.000307591 Jy ! Component: 2800 - total flux cleaned = 0.000325575 Jy ! Component: 2850 - total flux cleaned = 0.000361093 Jy ! Component: 2900 - total flux cleaned = 0.00039633 Jy ! Component: 2950 - total flux cleaned = 0.000404885 Jy ! Component: 3000 - total flux cleaned = 0.00042221 Jy ! Component: 3050 - total flux cleaned = 0.000439353 Jy ! Component: 3100 - total flux cleaned = 0.000447944 Jy ! Component: 3150 - total flux cleaned = 0.000464967 Jy ! Component: 3200 - total flux cleaned = 0.000490242 Jy ! Component: 3250 - total flux cleaned = 0.000515399 Jy ! Component: 3300 - total flux cleaned = 0.000532032 Jy ! Component: 3350 - total flux cleaned = 0.000531972 Jy ! Component: 3400 - total flux cleaned = 0.000531915 Jy ! Component: 3450 - total flux cleaned = 0.000531986 Jy ! Component: 3500 - total flux cleaned = 0.000540127 Jy ! Component: 3550 - total flux cleaned = 0.000548333 Jy ! Component: 3600 - total flux cleaned = 0.000604537 Jy ! Component: 3650 - total flux cleaned = 0.000588546 Jy ! Component: 3700 - total flux cleaned = 0.0006044 Jy ! Component: 3750 - total flux cleaned = 0.000588664 Jy ! Component: 3800 - total flux cleaned = 0.000604328 Jy ! Component: 3850 - total flux cleaned = 0.000612131 Jy ! Component: 3900 - total flux cleaned = 0.000619837 Jy ! Component: 3950 - total flux cleaned = 0.000642947 Jy ! Component: 4000 - total flux cleaned = 0.000604638 Jy ! Component: 4050 - total flux cleaned = 0.000635152 Jy ! Total flux subtracted in 4096 components = 0.000619967 Jy ! Clean residual min=-0.000475 max=0.000447 Jy/beam ! Clean residual mean=-0.000000 rms=0.000132 Jy/beam ! Combined flux in latest and established models = 0.125252 Jy keep ! Adding 277 model components to the UV plane model. ! The established model now contains 386 components and 0.125252 Jy ![Exited script file: muppet] wmap "J1530+3758_S_2014_06_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.774 x 5.882 at -8.414 degrees (North through East) ! Clean map min=-0.0007824 max=0.10543 Jy/beam ! Writing clean map to FITS file: J1530+3758_S_2014_06_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.105426 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000130108 device "J1530+3758_S_2014_06_09_pus\_map.eps/VPS" ! Attempting to open device: 'J1530+3758_S_2014_06_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.370233 0.370233 0.740465 1.48093 2.96186 5.92372 11.8474 23.6949 47.3898 94.7795 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.105 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.774 x 5.882 at -8.414 degrees (North through East) ! Clean map min=-0.0007824 max=0.10543 Jy/beam quit ! Quitting program ! Log file J1530+3758_S_2014_06_09_pus_uvs.log closed on Wed Nov 16 19:57:25 2016