! Started logfile: J1522-2730_S_2015_01_23_pus_uvs.log on Mon Jan 2 19:28:31 2017 obs J1522-2730_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J1522-2730_S_2015_01_23_pus_uva.fits ! AN table 1: 8 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.602778 visibilities/baseline/integration-bin. ! Found source: J1522-2730 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 868 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1522-2730_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.409240Jy sigma=0.003185 ! Fit after self-cal, rms=0.398560Jy sigma=0.003074 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.037 mas, bmaj=15.52 mas, bpa=-11.32 degrees ! Estimated noise=3368.53 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.630988 Jy ! Component: 100 - total flux cleaned = 0.774555 Jy ! Total flux subtracted in 100 components = 0.774555 Jy ! Clean residual min=-0.066404 max=0.161682 Jy/beam ! Clean residual mean=0.000057 rms=0.027263 Jy/beam ! Combined flux in latest and established models = 0.774555 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.774555 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.324064Jy sigma=0.002468 ! Fit after self-cal, rms=0.324057Jy sigma=0.002468 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.666 mas, bmaj=17 mas, bpa=-9.604 degrees ! Estimated noise=2800.32 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (15.5, -47). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.139621 Jy ! Component: 100 - total flux cleaned = 0.190879 Jy ! Component: 150 - total flux cleaned = 0.223736 Jy ! Component: 200 - total flux cleaned = 0.239849 Jy ! Total flux subtracted in 200 components = 0.239849 Jy ! Clean residual min=-0.046235 max=0.063014 Jy/beam ! Clean residual mean=-0.000210 rms=0.014434 Jy/beam ! Combined flux in latest and established models = 1.0144 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 56 components and 1.0144 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.274692Jy sigma=0.001730 ! Fit after self-cal, rms=0.270371Jy sigma=0.001707 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.51 HN 1.00* KP 1.12 ! LA 1.00 MK 1.05 NL 1.87 OV 0.96 ! PT 1.03 SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.73 HN 1.00* KP 1.03 ! LA 0.97 MK 1.04 NL 1.26 OV 0.99 ! PT 1.01 SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 2.10 HN 1.00* KP 0.90 ! LA 0.78 MK 1.07 NL 0.99 OV 0.91 ! PT 1.00 SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 2.05 HN 1.00* KP 0.81 ! LA 0.81 MK 1.04 NL 0.68 OV 0.96 ! PT 1.02 SC 1.00* ! ! ! Fit before self-cal, rms=0.270371Jy sigma=0.001707 ! Fit after self-cal, rms=0.225058Jy sigma=0.000811 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.723 mas, bmaj=17.05 mas, bpa=-9.734 degrees ! Estimated noise=2880.87 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0120284 Jy ! Component: 100 - total flux cleaned = -0.0133433 Jy ! Component: 150 - total flux cleaned = -0.014375 Jy ! Component: 200 - total flux cleaned = -0.0145809 Jy ! Total flux subtracted in 200 components = -0.0145809 Jy ! Clean residual min=-0.011550 max=0.011992 Jy/beam ! Clean residual mean=-0.000007 rms=0.003307 Jy/beam ! Combined flux in latest and established models = 0.999824 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 93 components and 0.999823 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.222913Jy sigma=0.000793 ! Fit after self-cal, rms=0.223274Jy sigma=0.000791 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.223274Jy sigma=0.000791 ! Fit after self-cal, rms=0.224533Jy sigma=0.000790 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.728 mas, bmaj=17.08 mas, bpa=-9.739 degrees ! Estimated noise=2888.6 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00454149 Jy ! Component: 100 - total flux cleaned = -0.00580273 Jy ! Component: 150 - total flux cleaned = -0.00632628 Jy ! Component: 200 - total flux cleaned = -0.00677944 Jy ! Total flux subtracted in 200 components = -0.00677944 Jy ! Clean residual min=-0.010469 max=0.011028 Jy/beam ! Clean residual mean=-0.000001 rms=0.002922 Jy/beam ! Combined flux in latest and established models = 0.993044 Jy selfcal ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 131 components and 0.993044 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.223720Jy sigma=0.000785 ! Fit after self-cal, rms=0.223726Jy sigma=0.000785 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00059005 Jy ! Component: 100 - total flux cleaned = -0.00085572 Jy ! Component: 150 - total flux cleaned = -0.00109562 Jy ! Component: 200 - total flux cleaned = -0.00131877 Jy ! Total flux subtracted in 200 components = -0.00131877 Jy ! Clean residual min=-0.010333 max=0.010560 Jy/beam ! Clean residual mean=0.000000 rms=0.002796 Jy/beam ! Combined flux in latest and established models = 0.991725 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 147 components and 0.991725 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.223346Jy sigma=0.000783 ! Fit after self-cal, rms=0.223368Jy sigma=0.000783 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.223368Jy sigma=0.000783 ! Fit after self-cal, rms=0.225306Jy sigma=0.000782 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.731 mas, bmaj=17.1 mas, bpa=-9.752 degrees ! Estimated noise=2898.14 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00231578 Jy ! Component: 100 - total flux cleaned = -0.0035764 Jy ! Component: 150 - total flux cleaned = -0.00427605 Jy ! Component: 200 - total flux cleaned = -0.00486495 Jy ! Total flux subtracted in 200 components = -0.00486495 Jy ! Clean residual min=-0.009526 max=0.010122 Jy/beam ! Clean residual mean=-0.000001 rms=0.002657 Jy/beam ! Combined flux in latest and established models = 0.98686 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 168 components and 0.98686 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.224882Jy sigma=0.000781 ! Fit after self-cal, rms=0.224918Jy sigma=0.000780 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00029432 Jy ! Component: 100 - total flux cleaned = -0.000654672 Jy ! Component: 150 - total flux cleaned = -0.000989378 Jy ! Component: 200 - total flux cleaned = -0.00122207 Jy ! Total flux subtracted in 200 components = -0.00122207 Jy ! Clean residual min=-0.009412 max=0.009920 Jy/beam ! Clean residual mean=-0.000000 rms=0.002624 Jy/beam ! Combined flux in latest and established models = 0.985638 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 177 components and 0.985638 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.224721Jy sigma=0.000780 ! Fit after self-cal, rms=0.224753Jy sigma=0.000780 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.224753Jy sigma=0.000780 ! Fit after self-cal, rms=0.226584Jy sigma=0.000779 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.529 mas, bmaj=24.02 mas, bpa=9.569 degrees ! Estimated noise=3502.45 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000663003 Jy ! Component: 100 - total flux cleaned = -0.000803205 Jy ! Component: 150 - total flux cleaned = -0.00101925 Jy ! Component: 200 - total flux cleaned = -0.00130279 Jy ! Total flux subtracted in 200 components = -0.00130279 Jy ! Clean residual min=-0.007989 max=0.010424 Jy/beam ! Clean residual mean=-0.000001 rms=0.003045 Jy/beam ! Combined flux in latest and established models = 0.984335 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 205 components and 0.984335 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.226278Jy sigma=0.000779 ! Fit after self-cal, rms=0.226325Jy sigma=0.000779 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.25932e-05 Jy ! Component: 100 - total flux cleaned = -0.000246156 Jy ! Component: 150 - total flux cleaned = -0.000493387 Jy ! Component: 200 - total flux cleaned = -0.000716722 Jy ! Total flux subtracted in 200 components = -0.000716722 Jy ! Clean residual min=-0.007693 max=0.010340 Jy/beam ! Clean residual mean=0.000000 rms=0.003022 Jy/beam ! Combined flux in latest and established models = 0.983618 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 228 components and 0.983618 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.226178Jy sigma=0.000779 ! Fit after self-cal, rms=0.226210Jy sigma=0.000778 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.734 mas, bmaj=17.11 mas, bpa=-9.764 degrees ! Estimated noise=2906.55 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.734 x 17.11 at -9.764 degrees (North through East) ! Clean map min=-0.0082105 max=0.76064 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.226210Jy sigma=0.000778 ! Fit after self-cal, rms=0.222004Jy sigma=0.000715 ! Inverting map and beam ! Estimated beam: bmin=3.741 mas, bmaj=17.11 mas, bpa=-9.765 degrees ! Estimated noise=2918.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00106825 Jy ! Component: 100 - total flux cleaned = -0.00191873 Jy ! Component: 150 - total flux cleaned = -0.00262037 Jy ! Component: 200 - total flux cleaned = -0.00288744 Jy ! Total flux subtracted in 200 components = -0.00288744 Jy ! Clean residual min=-0.008453 max=0.009324 Jy/beam ! Clean residual mean=-0.000008 rms=0.002463 Jy/beam ! Combined flux in latest and established models = 0.980731 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 254 components and 0.980731 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.221839Jy sigma=0.000714 ! Fit after self-cal, rms=0.221882Jy sigma=0.000714 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.32449e-05 Jy ! Component: 100 - total flux cleaned = -2.12454e-05 Jy ! Component: 150 - total flux cleaned = -0.000138605 Jy ! Component: 200 - total flux cleaned = -0.000248099 Jy ! Total flux subtracted in 200 components = -0.000248099 Jy ! Clean residual min=-0.008476 max=0.009304 Jy/beam ! Clean residual mean=-0.000008 rms=0.002455 Jy/beam ! Combined flux in latest and established models = 0.980483 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 265 components and 0.980483 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.221804Jy sigma=0.000713 ! Fit after self-cal, rms=0.221827Jy sigma=0.000713 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.221827Jy sigma=0.000713 ! Fit after self-cal, rms=0.222907Jy sigma=0.000713 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.055 mas, bmaj=15.75 mas, bpa=-11.49 degrees ! Estimated noise=3444.47 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.645175 Jy ! Component: 100 - total flux cleaned = 0.820859 Jy ! Component: 150 - total flux cleaned = 0.883552 Jy ! Component: 200 - total flux cleaned = 0.913999 Jy ! Total flux subtracted in 200 components = 0.913999 Jy ! Clean residual min=-0.015014 max=0.019098 Jy/beam ! Clean residual mean=0.000018 rms=0.004610 Jy/beam ! Combined flux in latest and established models = 0.914 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.914 Jy ! Inverting map and beam ! Estimated beam: bmin=3.744 mas, bmaj=17.12 mas, bpa=-9.773 degrees ! Estimated noise=2924.73 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-16, 46). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0233133 Jy ! Component: 100 - total flux cleaned = 0.0377396 Jy ! Component: 150 - total flux cleaned = 0.0470008 Jy ! Component: 200 - total flux cleaned = 0.0506295 Jy ! Total flux subtracted in 200 components = 0.0506295 Jy ! Clean residual min=-0.008718 max=0.009171 Jy/beam ! Clean residual mean=-0.000013 rms=0.002712 Jy/beam ! Combined flux in latest and established models = 0.964629 Jy ! Adding 56 model components to the UV plane model. ! The established model now contains 77 components and 0.964629 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.551 mas, bmaj=24.03 mas, bpa=9.629 degrees ! Estimated noise=3516.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00575567 Jy ! Component: 100 - total flux cleaned = 0.00779179 Jy ! Component: 150 - total flux cleaned = 0.00946137 Jy ! Component: 200 - total flux cleaned = 0.010265 Jy ! Total flux subtracted in 200 components = 0.010265 Jy ! Clean residual min=-0.008331 max=0.008597 Jy/beam ! Clean residual mean=-0.000021 rms=0.002668 Jy/beam ! Combined flux in latest and established models = 0.974894 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00086634 Jy ! Component: 100 - total flux cleaned = 0.00152382 Jy ! Component: 150 - total flux cleaned = 0.00201764 Jy ! Component: 200 - total flux cleaned = 0.00259117 Jy ! Total flux subtracted in 200 components = 0.00259117 Jy ! Clean residual min=-0.007917 max=0.008649 Jy/beam ! Clean residual mean=-0.000024 rms=0.002556 Jy/beam ! Combined flux in latest and established models = 0.977485 Jy ! Adding 77 model components to the UV plane model. ! The established model now contains 144 components and 0.977485 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.744 mas, bmaj=17.12 mas, bpa=-9.773 degrees ! Estimated noise=2924.73 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.75514e-05 Jy ! Component: 100 - total flux cleaned = -4.50634e-05 Jy ! Component: 150 - total flux cleaned = -0.000184017 Jy ! Component: 200 - total flux cleaned = -0.000557112 Jy ! Total flux subtracted in 200 components = -0.000557112 Jy ! Clean residual min=-0.008001 max=0.008280 Jy/beam ! Clean residual mean=-0.000014 rms=0.002141 Jy/beam ! Combined flux in latest and established models = 0.976928 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 164 components and 0.976928 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.222112Jy sigma=0.000705 ! Fit after self-cal, rms=0.222051Jy sigma=0.000703 wmodel J1522-2730_S_2015_01_23_pus_map.mod ! Writing 164 model components to file: J1522-2730_S_2015_01_23_pus_map.mod wobs J1522-2730_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J1522-2730_S_2015_01_23_pus_uvs.fits wwins J1522-2730_S_2015_01_23_pus_map.win ! wwins: Wrote 3 windows to J1522-2730_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00196327 Jy ! Component: 100 - total flux cleaned = 0.00263856 Jy ! Component: 150 - total flux cleaned = 0.00336275 Jy ! Component: 200 - total flux cleaned = 0.00391975 Jy ! Component: 250 - total flux cleaned = 0.00413334 Jy ! Component: 300 - total flux cleaned = 0.00452796 Jy ! Component: 350 - total flux cleaned = 0.00452793 Jy ! Component: 400 - total flux cleaned = 0.00435088 Jy ! Component: 450 - total flux cleaned = 0.00435289 Jy ! Component: 500 - total flux cleaned = 0.00426954 Jy ! Component: 550 - total flux cleaned = 0.00418893 Jy ! Component: 600 - total flux cleaned = 0.00403366 Jy ! Component: 650 - total flux cleaned = 0.00418577 Jy ! Component: 700 - total flux cleaned = 0.00418466 Jy ! Component: 750 - total flux cleaned = 0.00418467 Jy ! Component: 800 - total flux cleaned = 0.00432435 Jy ! Component: 850 - total flux cleaned = 0.00439278 Jy ! Component: 900 - total flux cleaned = 0.00459438 Jy ! Component: 950 - total flux cleaned = 0.00472537 Jy ! Component: 1000 - total flux cleaned = 0.00472527 Jy ! Component: 1050 - total flux cleaned = 0.00491402 Jy ! Component: 1100 - total flux cleaned = 0.00497549 Jy ! Component: 1150 - total flux cleaned = 0.00509605 Jy ! Component: 1200 - total flux cleaned = 0.00515583 Jy ! Component: 1250 - total flux cleaned = 0.00533144 Jy ! Component: 1300 - total flux cleaned = 0.00544599 Jy ! Component: 1350 - total flux cleaned = 0.005559 Jy ! Component: 1400 - total flux cleaned = 0.00555866 Jy ! Component: 1450 - total flux cleaned = 0.00561393 Jy ! Component: 1500 - total flux cleaned = 0.00566858 Jy ! Component: 1550 - total flux cleaned = 0.00588296 Jy ! Component: 1600 - total flux cleaned = 0.0059361 Jy ! Component: 1650 - total flux cleaned = 0.00604157 Jy ! Component: 1700 - total flux cleaned = 0.00624962 Jy ! Component: 1750 - total flux cleaned = 0.00635268 Jy ! Component: 1800 - total flux cleaned = 0.00645465 Jy ! Component: 1850 - total flux cleaned = 0.00665592 Jy ! Component: 1900 - total flux cleaned = 0.00670574 Jy ! Component: 1950 - total flux cleaned = 0.00680461 Jy ! Component: 2000 - total flux cleaned = 0.00685384 Jy ! Component: 2050 - total flux cleaned = 0.00690273 Jy ! Component: 2100 - total flux cleaned = 0.00704807 Jy ! Component: 2150 - total flux cleaned = 0.00714442 Jy ! Component: 2200 - total flux cleaned = 0.0070483 Jy ! Component: 2250 - total flux cleaned = 0.00709595 Jy ! Component: 2300 - total flux cleaned = 0.00714339 Jy ! Component: 2350 - total flux cleaned = 0.0071432 Jy ! Component: 2400 - total flux cleaned = 0.00709631 Jy ! Component: 2450 - total flux cleaned = 0.00723782 Jy ! Component: 2500 - total flux cleaned = 0.00704945 Jy ! Component: 2550 - total flux cleaned = 0.00714329 Jy ! Component: 2600 - total flux cleaned = 0.00709597 Jy ! Component: 2650 - total flux cleaned = 0.0071427 Jy ! Component: 2700 - total flux cleaned = 0.00718965 Jy ! Component: 2750 - total flux cleaned = 0.00733079 Jy ! Component: 2800 - total flux cleaned = 0.00733099 Jy ! Component: 2850 - total flux cleaned = 0.00737824 Jy ! Component: 2900 - total flux cleaned = 0.00742538 Jy ! Component: 2950 - total flux cleaned = 0.00742539 Jy ! Component: 3000 - total flux cleaned = 0.00752002 Jy ! Component: 3050 - total flux cleaned = 0.0076153 Jy ! Component: 3100 - total flux cleaned = 0.00785439 Jy ! Component: 3150 - total flux cleaned = 0.00785471 Jy ! Component: 3200 - total flux cleaned = 0.00795252 Jy ! Component: 3250 - total flux cleaned = 0.0080015 Jy ! Component: 3300 - total flux cleaned = 0.00809956 Jy ! Component: 3350 - total flux cleaned = 0.00815016 Jy ! Component: 3400 - total flux cleaned = 0.00820072 Jy ! Component: 3450 - total flux cleaned = 0.00825172 Jy ! Component: 3500 - total flux cleaned = 0.00835471 Jy ! Component: 3550 - total flux cleaned = 0.00840609 Jy ! Component: 3600 - total flux cleaned = 0.00845824 Jy ! Component: 3650 - total flux cleaned = 0.00856432 Jy ! Component: 3700 - total flux cleaned = 0.00867172 Jy ! Component: 3750 - total flux cleaned = 0.00872611 Jy ! Component: 3800 - total flux cleaned = 0.00883632 Jy ! Component: 3850 - total flux cleaned = 0.0088931 Jy ! Component: 3900 - total flux cleaned = 0.00889328 Jy ! Component: 3950 - total flux cleaned = 0.00895106 Jy ! Component: 4000 - total flux cleaned = 0.00901021 Jy ! Component: 4050 - total flux cleaned = 0.00901041 Jy ! Total flux subtracted in 4096 components = 0.00907107 Jy ! Clean residual min=-0.003278 max=0.003153 Jy/beam ! Clean residual mean=0.000005 rms=0.001010 Jy/beam ! Combined flux in latest and established models = 0.985999 Jy keep ! Adding 312 model components to the UV plane model. ! The established model now contains 476 components and 0.986 Jy ![Exited script file: muppet] wmap "J1522-2730_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.744 x 17.12 at -9.773 degrees (North through East) ! Clean map min=-0.0092862 max=0.74361 Jy/beam ! Writing clean map to FITS file: J1522-2730_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.743612 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00104643 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.422166 0.422166 0.844333 1.68867 3.37733 6.75466 13.5093 27.0187 54.0373 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0031 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.743 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.744 x 17.12 at -9.773 degrees (North through East) ! Clean map min=-0.0092862 max=0.74361 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1522-2730_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 19:28:35 2017