! Started logfile: J1521+4336_S_2015_03_17_pus_uvs.log on Fri Dec 30 23:02:45 2016 obs J1521+4336_S_2015_03_17_pus_uva.fits ! Reading UV FITS file: J1521+4336_S_2015_03_17_pus_uva.fits ! AN table 1: 14 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.696825 visibilities/baseline/integration-bin. ! Found source: J1521+4336 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 330 lines of history. ! ! Reading 1756 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1521+4336_S_2015_03_17_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.711744Jy sigma=0.009740 ! Fit after self-cal, rms=0.702919Jy sigma=0.009617 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.608 mas, bmaj=9.165 mas, bpa=14.42 degrees ! Estimated noise=1564.8 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.224178 Jy ! Component: 100 - total flux cleaned = 0.276347 Jy ! Total flux subtracted in 100 components = 0.276347 Jy ! Clean residual min=-0.011488 max=0.020653 Jy/beam ! Clean residual mean=0.000041 rms=0.004046 Jy/beam ! Combined flux in latest and established models = 0.276347 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.276347 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084700Jy sigma=0.001025 ! Fit after self-cal, rms=0.084701Jy sigma=0.001025 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.026 mas, bmaj=9.571 mas, bpa=14.37 degrees ! Estimated noise=1267.22 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0288792 Jy ! Component: 100 - total flux cleaned = 0.0443242 Jy ! Component: 150 - total flux cleaned = 0.0543195 Jy ! Component: 200 - total flux cleaned = 0.0612329 Jy ! Total flux subtracted in 200 components = 0.0612329 Jy ! Clean residual min=-0.011624 max=0.010151 Jy/beam ! Clean residual mean=0.000006 rms=0.002886 Jy/beam ! Combined flux in latest and established models = 0.33758 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 53 components and 0.33758 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072004Jy sigma=0.000894 ! Fit after self-cal, rms=0.071988Jy sigma=0.000893 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.86 HN 1.00* KP 1.12 ! LA 0.96 MK 1.00 NL 0.85 OV 1.02 ! PT 1.08 SC 0.98 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.85 HN 1.00* KP 1.09 ! LA 0.96 MK 1.07 NL 0.96 OV 1.04 ! PT 1.05 SC 1.04 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.88 HN 1.00* KP 0.97 ! LA 0.79 MK 1.11 NL 1.05 OV 0.98 ! PT 1.05 SC 1.01 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 0.91 HN 1.00* KP 0.93 ! LA 0.86 MK 1.11 NL 0.97 OV 0.99 ! PT 1.07 SC 0.94 ! ! ! Fit before self-cal, rms=0.071988Jy sigma=0.000893 ! Fit after self-cal, rms=0.059233Jy sigma=0.000777 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.066 mas, bmaj=9.613 mas, bpa=14.63 degrees ! Estimated noise=1263.48 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000593071 Jy ! Component: 100 - total flux cleaned = -0.00141114 Jy ! Component: 150 - total flux cleaned = -0.00171202 Jy ! Component: 200 - total flux cleaned = -0.00191999 Jy ! Total flux subtracted in 200 components = -0.00191999 Jy ! Clean residual min=-0.005167 max=0.004133 Jy/beam ! Clean residual mean=-0.000000 rms=0.001072 Jy/beam ! Combined flux in latest and established models = 0.33566 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 69 components and 0.33566 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059071Jy sigma=0.000775 ! Fit after self-cal, rms=0.059005Jy sigma=0.000774 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059005Jy sigma=0.000774 ! Fit after self-cal, rms=0.058952Jy sigma=0.000774 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.072 mas, bmaj=9.61 mas, bpa=14.71 degrees ! Estimated noise=1263.5 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000966904 Jy ! Component: 100 - total flux cleaned = -0.00142682 Jy ! Component: 150 - total flux cleaned = -0.0016161 Jy ! Component: 200 - total flux cleaned = -0.00174063 Jy ! Total flux subtracted in 200 components = -0.00174063 Jy ! Clean residual min=-0.004730 max=0.004104 Jy/beam ! Clean residual mean=0.000000 rms=0.001030 Jy/beam ! Combined flux in latest and established models = 0.33392 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 76 components and 0.33392 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058855Jy sigma=0.000773 ! Fit after self-cal, rms=0.058850Jy sigma=0.000773 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.9606e-07 Jy ! Component: 100 - total flux cleaned = -3.42697e-05 Jy ! Component: 150 - total flux cleaned = -6.6416e-05 Jy ! Component: 200 - total flux cleaned = -6.75265e-05 Jy ! Total flux subtracted in 200 components = -6.75265e-05 Jy ! Clean residual min=-0.004757 max=0.004014 Jy/beam ! Clean residual mean=0.000000 rms=0.001016 Jy/beam ! Combined flux in latest and established models = 0.333852 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 80 components and 0.333852 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058813Jy sigma=0.000772 ! Fit after self-cal, rms=0.058809Jy sigma=0.000772 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058809Jy sigma=0.000772 ! Fit after self-cal, rms=0.058746Jy sigma=0.000772 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.077 mas, bmaj=9.607 mas, bpa=14.79 degrees ! Estimated noise=1263.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000986063 Jy ! Component: 100 - total flux cleaned = -0.00115114 Jy ! Component: 150 - total flux cleaned = -0.00132463 Jy ! Component: 200 - total flux cleaned = -0.00141381 Jy ! Total flux subtracted in 200 components = -0.00141381 Jy ! Clean residual min=-0.004380 max=0.004005 Jy/beam ! Clean residual mean=0.000000 rms=0.000988 Jy/beam ! Combined flux in latest and established models = 0.332438 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 83 components and 0.332438 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058691Jy sigma=0.000771 ! Fit after self-cal, rms=0.058689Jy sigma=0.000771 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.82419e-05 Jy ! Component: 100 - total flux cleaned = 2.8196e-05 Jy ! Component: 150 - total flux cleaned = 5.17593e-05 Jy ! Component: 200 - total flux cleaned = 7.46161e-05 Jy ! Total flux subtracted in 200 components = 7.46161e-05 Jy ! Clean residual min=-0.004351 max=0.003962 Jy/beam ! Clean residual mean=0.000000 rms=0.000982 Jy/beam ! Combined flux in latest and established models = 0.332513 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 85 components and 0.332513 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058670Jy sigma=0.000771 ! Fit after self-cal, rms=0.058668Jy sigma=0.000771 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058668Jy sigma=0.000771 ! Fit after self-cal, rms=0.058616Jy sigma=0.000771 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.552 mas, bmaj=10.4 mas, bpa=17.35 degrees ! Estimated noise=1580.67 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000372276 Jy ! Component: 100 - total flux cleaned = -0.000345874 Jy ! Component: 150 - total flux cleaned = -0.000304111 Jy ! Component: 200 - total flux cleaned = -0.000267602 Jy ! Total flux subtracted in 200 components = -0.000267602 Jy ! Clean residual min=-0.004601 max=0.003490 Jy/beam ! Clean residual mean=-0.000001 rms=0.001161 Jy/beam ! Combined flux in latest and established models = 0.332245 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 92 components and 0.332245 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058618Jy sigma=0.000771 ! Fit after self-cal, rms=0.058613Jy sigma=0.000771 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.04173e-05 Jy ! Component: 100 - total flux cleaned = -2.40475e-06 Jy ! Component: 150 - total flux cleaned = 2.93521e-05 Jy ! Component: 200 - total flux cleaned = 7.06069e-05 Jy ! Total flux subtracted in 200 components = 7.06069e-05 Jy ! Clean residual min=-0.004583 max=0.003442 Jy/beam ! Clean residual mean=-0.000001 rms=0.001153 Jy/beam ! Combined flux in latest and established models = 0.332316 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 97 components and 0.332316 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058627Jy sigma=0.000771 ! Fit after self-cal, rms=0.058625Jy sigma=0.000771 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.081 mas, bmaj=9.604 mas, bpa=14.84 degrees ! Estimated noise=1262.27 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.081 x 9.604 at 14.84 degrees (North through East) ! Clean map min=-0.0039995 max=0.29136 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.641 mas, bmaj=9.276 mas, bpa=14.92 degrees ! Estimated noise=1569.53 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.224383 Jy ! Component: 100 - total flux cleaned = 0.274462 Jy ! Component: 150 - total flux cleaned = 0.294213 Jy ! Component: 200 - total flux cleaned = 0.305501 Jy ! Total flux subtracted in 200 components = 0.305501 Jy ! Clean residual min=-0.005962 max=0.007001 Jy/beam ! Clean residual mean=0.000013 rms=0.001636 Jy/beam ! Combined flux in latest and established models = 0.305501 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.305501 Jy ! Inverting map and beam ! Estimated beam: bmin=3.081 mas, bmaj=9.604 mas, bpa=14.84 degrees ! Estimated noise=1262.27 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00923886 Jy ! Component: 100 - total flux cleaned = 0.0150153 Jy ! Component: 150 - total flux cleaned = 0.0188934 Jy ! Component: 200 - total flux cleaned = 0.0215604 Jy ! Total flux subtracted in 200 components = 0.0215604 Jy ! Clean residual min=-0.004266 max=0.003770 Jy/beam ! Clean residual mean=0.000004 rms=0.001019 Jy/beam ! Combined flux in latest and established models = 0.327062 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 53 components and 0.327062 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.552 mas, bmaj=10.4 mas, bpa=17.35 degrees ! Estimated noise=1580.67 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00296436 Jy ! Component: 100 - total flux cleaned = 0.00431356 Jy ! Component: 150 - total flux cleaned = 0.00502674 Jy ! Component: 200 - total flux cleaned = 0.00515771 Jy ! Total flux subtracted in 200 components = 0.00515771 Jy ! Clean residual min=-0.004494 max=0.003422 Jy/beam ! Clean residual mean=-0.000001 rms=0.001159 Jy/beam ! Combined flux in latest and established models = 0.332219 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000126403 Jy ! Component: 100 - total flux cleaned = 0.000216294 Jy ! Component: 150 - total flux cleaned = 0.000292728 Jy ! Component: 200 - total flux cleaned = 0.000315626 Jy ! Total flux subtracted in 200 components = 0.000315626 Jy ! Clean residual min=-0.004489 max=0.003337 Jy/beam ! Clean residual mean=-0.000002 rms=0.001153 Jy/beam ! Combined flux in latest and established models = 0.332535 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 84 components and 0.332535 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.081 mas, bmaj=9.604 mas, bpa=14.84 degrees ! Estimated noise=1262.27 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000366522 Jy ! Component: 100 - total flux cleaned = -0.000309475 Jy ! Component: 150 - total flux cleaned = -0.000355404 Jy ! Component: 200 - total flux cleaned = -0.000391497 Jy ! Total flux subtracted in 200 components = -0.000391497 Jy ! Clean residual min=-0.003964 max=0.003743 Jy/beam ! Clean residual mean=-0.000000 rms=0.000960 Jy/beam ! Combined flux in latest and established models = 0.332144 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 103 components and 0.332144 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058613Jy sigma=0.000770 ! Fit after self-cal, rms=0.058607Jy sigma=0.000770 wmodel J1521+4336_S_2015_03_17_pus_map.mod ! Writing 103 model components to file: J1521+4336_S_2015_03_17_pus_map.mod wobs J1521+4336_S_2015_03_17_pus_uvs.fits ! Writing UV FITS file: J1521+4336_S_2015_03_17_pus_uvs.fits wwins J1521+4336_S_2015_03_17_pus_map.win ! wwins: Wrote 1 windows to J1521+4336_S_2015_03_17_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000375152 Jy ! Component: 100 - total flux cleaned = -0.000561586 Jy ! Component: 150 - total flux cleaned = -0.000855169 Jy ! Component: 200 - total flux cleaned = -0.000964678 Jy ! Component: 250 - total flux cleaned = -0.000962377 Jy ! Component: 300 - total flux cleaned = -0.000962802 Jy ! Component: 350 - total flux cleaned = -0.000917211 Jy ! Component: 400 - total flux cleaned = -0.000964197 Jy ! Component: 450 - total flux cleaned = -0.00105077 Jy ! Component: 500 - total flux cleaned = -0.00105276 Jy ! Component: 550 - total flux cleaned = -0.000933673 Jy ! Component: 600 - total flux cleaned = -0.000974059 Jy ! Component: 650 - total flux cleaned = -0.00101184 Jy ! Component: 700 - total flux cleaned = -0.00101211 Jy ! Component: 750 - total flux cleaned = -0.00104849 Jy ! Component: 800 - total flux cleaned = -0.0010487 Jy ! Component: 850 - total flux cleaned = -0.00101523 Jy ! Component: 900 - total flux cleaned = -0.000916044 Jy ! Component: 950 - total flux cleaned = -0.000916716 Jy ! Component: 1000 - total flux cleaned = -0.000759107 Jy ! Component: 1050 - total flux cleaned = -0.000667823 Jy ! Component: 1100 - total flux cleaned = -0.000637496 Jy ! Component: 1150 - total flux cleaned = -0.000518955 Jy ! Component: 1200 - total flux cleaned = -0.000490625 Jy ! Component: 1250 - total flux cleaned = -0.000462206 Jy ! Component: 1300 - total flux cleaned = -0.00035084 Jy ! Component: 1350 - total flux cleaned = -0.000405893 Jy ! Component: 1400 - total flux cleaned = -0.000298652 Jy ! Component: 1450 - total flux cleaned = -0.000272566 Jy ! Component: 1500 - total flux cleaned = -0.000195117 Jy ! Component: 1550 - total flux cleaned = -0.000119264 Jy ! Component: 1600 - total flux cleaned = 5.44246e-06 Jy ! Component: 1650 - total flux cleaned = 0.000127563 Jy ! Component: 1700 - total flux cleaned = 0.000151142 Jy ! Component: 1750 - total flux cleaned = 0.000199056 Jy ! Component: 1800 - total flux cleaned = 0.000245941 Jy ! Component: 1850 - total flux cleaned = 0.000315258 Jy ! Component: 1900 - total flux cleaned = 0.000314688 Jy ! Component: 1950 - total flux cleaned = 0.000292377 Jy ! Component: 2000 - total flux cleaned = 0.000248524 Jy ! Component: 2050 - total flux cleaned = 0.000249114 Jy ! Component: 2100 - total flux cleaned = 0.000206402 Jy ! Component: 2150 - total flux cleaned = 0.000227465 Jy ! Component: 2200 - total flux cleaned = 0.000123016 Jy ! Component: 2250 - total flux cleaned = 0.000123384 Jy ! Component: 2300 - total flux cleaned = 6.26096e-05 Jy ! Component: 2350 - total flux cleaned = 4.22943e-05 Jy ! Component: 2400 - total flux cleaned = -1.74691e-05 Jy ! Component: 2450 - total flux cleaned = -9.56463e-05 Jy ! Component: 2500 - total flux cleaned = -0.000153557 Jy ! Component: 2550 - total flux cleaned = -0.000210666 Jy ! Component: 2600 - total flux cleaned = -0.000210654 Jy ! Component: 2650 - total flux cleaned = -0.000267188 Jy ! Component: 2700 - total flux cleaned = -0.000378113 Jy ! Component: 2750 - total flux cleaned = -0.000341328 Jy ! Component: 2800 - total flux cleaned = -0.00037759 Jy ! Component: 2850 - total flux cleaned = -0.000467395 Jy ! Component: 2900 - total flux cleaned = -0.000485314 Jy ! Component: 2950 - total flux cleaned = -0.000538196 Jy ! Component: 3000 - total flux cleaned = -0.00059052 Jy ! Component: 3050 - total flux cleaned = -0.000607777 Jy ! Component: 3100 - total flux cleaned = -0.000607903 Jy ! Component: 3150 - total flux cleaned = -0.000624873 Jy ! Component: 3200 - total flux cleaned = -0.000624903 Jy ! Component: 3250 - total flux cleaned = -0.00065814 Jy ! Component: 3300 - total flux cleaned = -0.000674641 Jy ! Component: 3350 - total flux cleaned = -0.000707394 Jy ! Component: 3400 - total flux cleaned = -0.000756251 Jy ! Component: 3450 - total flux cleaned = -0.000756379 Jy ! Component: 3500 - total flux cleaned = -0.000820536 Jy ! Component: 3550 - total flux cleaned = -0.000820677 Jy ! Component: 3600 - total flux cleaned = -0.000883787 Jy ! Component: 3650 - total flux cleaned = -0.000946395 Jy ! Component: 3700 - total flux cleaned = -0.000961929 Jy ! Component: 3750 - total flux cleaned = -0.00100818 Jy ! Component: 3800 - total flux cleaned = -0.00103881 Jy ! Component: 3850 - total flux cleaned = -0.00106935 Jy ! Component: 3900 - total flux cleaned = -0.0010693 Jy ! Component: 3950 - total flux cleaned = -0.0010993 Jy ! Component: 4000 - total flux cleaned = -0.00111437 Jy ! Component: 4050 - total flux cleaned = -0.0011591 Jy ! Total flux subtracted in 4096 components = -0.00117395 Jy ! Clean residual min=-0.000838 max=0.000793 Jy/beam ! Clean residual mean=-0.000001 rms=0.000271 Jy/beam ! Combined flux in latest and established models = 0.33097 Jy keep ! Adding 271 model components to the UV plane model. ! The established model now contains 374 components and 0.330969 Jy ![Exited script file: muppet] wmap "J1521+4336_S_2015_03_17_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.081 x 9.604 at 14.84 degrees (North through East) ! Clean map min=-0.0021841 max=0.29198 Jy/beam ! Writing clean map to FITS file: J1521+4336_S_2015_03_17_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.291976 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000255301 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.262317 0.262317 0.524635 1.04927 2.09854 4.19708 8.39416 16.7883 33.5766 67.1532 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.291 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.081 x 9.604 at 14.84 degrees (North through East) ! Clean map min=-0.0021841 max=0.29198 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1521+4336_S_2015_03_17_pus_uvs.log closed on Fri Dec 30 23:02:49 2016