! Started logfile: J1517-2618_S_2014_08_05_pus_uvs.log on Sun Nov 13 17:31:13 2016
obs J1517-2618_S_2014_08_05_pus_uva.fits
! Reading UV FITS file: J1517-2618_S_2014_08_05_pus_uva.fits
! AN table 1: 147 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.646259 visibilities/baseline/integration-bin.
! Found source: J1517-2618
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23588e+09      3.2e+07          1      3.2e+07
!  02        2  2.26788e+09      3.2e+07          1      3.2e+07
!  03        3  2.29988e+09      3.2e+07          1      3.2e+07
!  04        4  2.36388e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 360 lines of history.
! 
! Reading 17100 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@muppet J1517-2618_S_2014_08_05_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 392 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 392 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 392 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 392 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.986070Jy  sigma=0.008401
! Fit after  self-cal, rms=0.932294Jy  sigma=0.007969
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.121 mas, bmaj=13.92 mas, bpa=18.16 degrees
! Estimated noise=1189.97 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0554937 Jy
! Component: 100  -  total flux cleaned = 0.0677026 Jy
! Total flux subtracted in 100 components = 0.0677026 Jy
! Clean residual min=-0.003503 max=0.003995 Jy/beam
! Clean residual mean=-0.000004 rms=0.000896 Jy/beam
! Combined flux in latest and established models = 0.0677025 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.0677025 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097795Jy  sigma=0.000767
! Fit after  self-cal, rms=0.097398Jy  sigma=0.000764
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.8 mas, bmaj=15.5 mas, bpa=16.5 degrees
! Estimated noise=646.042 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0062887 Jy
! Component: 100  -  total flux cleaned = 0.00951993 Jy
! Component: 150  -  total flux cleaned = 0.0113364 Jy
! Component: 200  -  total flux cleaned = 0.0124187 Jy
! Total flux subtracted in 200 components = 0.0124187 Jy
! Clean residual min=-0.002555 max=0.003368 Jy/beam
! Clean residual mean=-0.000006 rms=0.000657 Jy/beam
! Combined flux in latest and established models = 0.0801212 Jy
! Performing phase self-cal
! Adding 47 model components to the UV plane model.
! The established model now contains 54 components and 0.0801212 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.096968Jy  sigma=0.000761
! Fit after  self-cal, rms=0.096971Jy  sigma=0.000761
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.85     HN        0.97     KP        1.08     
!   LA        1.08     MK        1.00*    NL        1.05     OV        0.96     
!   PT        1.07     SC        0.99     
! 
! 
! Correcting IF 2.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.02     HN        1.06     KP        1.08     
!   LA        1.06     MK        1.00*    NL        1.01     OV        1.02     
!   PT        1.02     SC        1.01     
! 
! 
! Correcting IF 3.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.86     FD        1.14     HN        1.10     KP        0.95     
!   LA        0.81     MK        1.00*    NL        0.98     OV        0.94     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 4.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.01     HN        1.07     KP        0.93     
!   LA        0.80     MK        1.00*    NL        1.04     OV        0.94     
!   PT        1.07     SC        1.03     
! 
! 
! Fit before self-cal, rms=0.096971Jy  sigma=0.000761
! Fit after  self-cal, rms=0.094914Jy  sigma=0.000758
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.806 mas, bmaj=15.66 mas, bpa=16.64 degrees
! Estimated noise=643.13 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-25.5, -3).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00249284 Jy
! Component: 100  -  total flux cleaned = 0.00317723 Jy
! Component: 150  -  total flux cleaned = 0.00358873 Jy
! Component: 200  -  total flux cleaned = 0.00387044 Jy
! Total flux subtracted in 200 components = 0.00387044 Jy
! Clean residual min=-0.001802 max=0.001876 Jy/beam
! Clean residual mean=0.000002 rms=0.000481 Jy/beam
! Combined flux in latest and established models = 0.0839916 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 80 components and 0.0839916 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.094846Jy  sigma=0.000757
! Fit after  self-cal, rms=0.094789Jy  sigma=0.000757
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.094789Jy  sigma=0.000757
! Fit after  self-cal, rms=0.094438Jy  sigma=0.000757
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.805 mas, bmaj=15.66 mas, bpa=16.63 degrees
! Estimated noise=641.022 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00136118 Jy
! Component: 100  -  total flux cleaned = 0.00154379 Jy
! Component: 150  -  total flux cleaned = 0.00160212 Jy
! Component: 200  -  total flux cleaned = 0.00157607 Jy
! Total flux subtracted in 200 components = 0.00157607 Jy
! Clean residual min=-0.001716 max=0.001688 Jy/beam
! Clean residual mean=0.000002 rms=0.000455 Jy/beam
! Combined flux in latest and established models = 0.0855677 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 92 components and 0.0855677 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.094413Jy  sigma=0.000757
! Fit after  self-cal, rms=0.094407Jy  sigma=0.000757
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000348544 Jy
! Component: 100  -  total flux cleaned = 0.000347729 Jy
! Component: 150  -  total flux cleaned = 0.000300116 Jy
! Component: 200  -  total flux cleaned = 0.000257179 Jy
! Total flux subtracted in 200 components = 0.000257179 Jy
! Clean residual min=-0.001640 max=0.001702 Jy/beam
! Clean residual mean=0.000002 rms=0.000446 Jy/beam
! Combined flux in latest and established models = 0.0858249 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 96 components and 0.0858249 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.094395Jy  sigma=0.000756
! Fit after  self-cal, rms=0.094393Jy  sigma=0.000756
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.094393Jy  sigma=0.000756
! Fit after  self-cal, rms=0.095052Jy  sigma=0.000756
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.807 mas, bmaj=15.66 mas, bpa=16.51 degrees
! Estimated noise=639.971 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00023861 Jy
! Component: 100  -  total flux cleaned = 0.000334313 Jy
! Component: 150  -  total flux cleaned = 0.000441785 Jy
! Component: 200  -  total flux cleaned = 0.000518982 Jy
! Total flux subtracted in 200 components = 0.000518982 Jy
! Clean residual min=-0.001572 max=0.001573 Jy/beam
! Clean residual mean=0.000001 rms=0.000416 Jy/beam
! Combined flux in latest and established models = 0.0863439 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 118 components and 0.0863439 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.095042Jy  sigma=0.000756
! Fit after  self-cal, rms=0.095075Jy  sigma=0.000756
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000127362 Jy
! Component: 100  -  total flux cleaned = 0.000163504 Jy
! Component: 150  -  total flux cleaned = 0.000163672 Jy
! Component: 200  -  total flux cleaned = 0.000147775 Jy
! Total flux subtracted in 200 components = 0.000147775 Jy
! Clean residual min=-0.001558 max=0.001575 Jy/beam
! Clean residual mean=0.000001 rms=0.000411 Jy/beam
! Combined flux in latest and established models = 0.0864917 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 131 components and 0.0864917 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.095069Jy  sigma=0.000756
! Fit after  self-cal, rms=0.095068Jy  sigma=0.000756
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.095068Jy  sigma=0.000756
! Fit after  self-cal, rms=0.095355Jy  sigma=0.000756
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.968 mas, bmaj=21.9 mas, bpa=7.045 degrees
! Estimated noise=728.734 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.61448e-05 Jy
! Component: 100  -  total flux cleaned = -5.20279e-05 Jy
! Component: 150  -  total flux cleaned = -5.2526e-05 Jy
! Component: 200  -  total flux cleaned = -9.07314e-05 Jy
! Total flux subtracted in 200 components = -9.07314e-05 Jy
! Clean residual min=-0.001607 max=0.001735 Jy/beam
! Clean residual mean=0.000000 rms=0.000470 Jy/beam
! Combined flux in latest and established models = 0.086401 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 155 components and 0.086401 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.095353Jy  sigma=0.000756
! Fit after  self-cal, rms=0.095365Jy  sigma=0.000756
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.20576e-07 Jy
! Component: 100  -  total flux cleaned = -5.14519e-05 Jy
! Component: 150  -  total flux cleaned = -0.00010862 Jy
! Component: 200  -  total flux cleaned = -0.000150044 Jy
! Total flux subtracted in 200 components = -0.000150044 Jy
! Clean residual min=-0.001602 max=0.001715 Jy/beam
! Clean residual mean=0.000000 rms=0.000465 Jy/beam
! Combined flux in latest and established models = 0.0862509 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 176 components and 0.0862509 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.095364Jy  sigma=0.000756
! Fit after  self-cal, rms=0.095367Jy  sigma=0.000756
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.807 mas, bmaj=15.67 mas, bpa=16.52 degrees
! Estimated noise=640.141 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.807 x 15.67 at 16.52 degrees (North through East)
! Clean map  min=-0.0017486  max=0.071294 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.111 mas, bmaj=14.08 mas, bpa=18.13 degrees
! Estimated noise=1187 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0553771 Jy
! Component: 100  -  total flux cleaned = 0.0677912 Jy
! Component: 150  -  total flux cleaned = 0.0730593 Jy
! Component: 200  -  total flux cleaned = 0.0766975 Jy
! Total flux subtracted in 200 components = 0.0766975 Jy
! Clean residual min=-0.002751 max=0.003026 Jy/beam
! Clean residual mean=-0.000003 rms=0.000713 Jy/beam
! Combined flux in latest and established models = 0.0766975 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 25 model components to the UV plane model.
! The established model now contains 25 components and 0.0766975 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.807 mas, bmaj=15.67 mas, bpa=16.52 degrees
! Estimated noise=640.141 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00323239 Jy
! Component: 100  -  total flux cleaned = 0.00537377 Jy
! Component: 150  -  total flux cleaned = 0.00642371 Jy
! Component: 200  -  total flux cleaned = 0.00730604 Jy
! Total flux subtracted in 200 components = 0.00730604 Jy
! Clean residual min=-0.001693 max=0.001753 Jy/beam
! Clean residual mean=-0.000003 rms=0.000455 Jy/beam
! Combined flux in latest and established models = 0.0840036 Jy
! Adding 47 model components to the UV plane model.
! The established model now contains 69 components and 0.0840036 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.968 mas, bmaj=21.9 mas, bpa=7.045 degrees
! Estimated noise=728.734 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00100818 Jy
! Component: 100  -  total flux cleaned = 0.00147292 Jy
! Component: 150  -  total flux cleaned = 0.00168848 Jy
! Component: 200  -  total flux cleaned = 0.00189741 Jy
! Total flux subtracted in 200 components = 0.00189741 Jy
! Clean residual min=-0.001719 max=0.001675 Jy/beam
! Clean residual mean=-0.000000 rms=0.000486 Jy/beam
! Combined flux in latest and established models = 0.085901 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000179293 Jy
! Component: 100  -  total flux cleaned = 0.000297115 Jy
! Component: 150  -  total flux cleaned = 0.000296542 Jy
! Component: 200  -  total flux cleaned = 0.000296727 Jy
! Total flux subtracted in 200 components = 0.000296727 Jy
! Clean residual min=-0.001670 max=0.001673 Jy/beam
! Clean residual mean=0.000000 rms=0.000476 Jy/beam
! Combined flux in latest and established models = 0.0861977 Jy
! Adding 56 model components to the UV plane model.
! The established model now contains 114 components and 0.0861977 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.807 mas, bmaj=15.67 mas, bpa=16.52 degrees
! Estimated noise=640.141 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000250263 Jy
! Component: 100  -  total flux cleaned = -0.000161277 Jy
! Component: 150  -  total flux cleaned = -5.55358e-05 Jy
! Component: 200  -  total flux cleaned = -7.8976e-06 Jy
! Total flux subtracted in 200 components = -7.8976e-06 Jy
! Clean residual min=-0.001597 max=0.001537 Jy/beam
! Clean residual mean=-0.000000 rms=0.000414 Jy/beam
! Combined flux in latest and established models = 0.0861898 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 133 components and 0.0861898 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.095383Jy  sigma=0.000756
! Fit after  self-cal, rms=0.095372Jy  sigma=0.000756
wmodel J1517-2618_S_2014_08_05_pus_map.mod
! Writing 133 model components to file: J1517-2618_S_2014_08_05_pus_map.mod
wobs J1517-2618_S_2014_08_05_pus_uvs.fits
! Writing UV FITS file: J1517-2618_S_2014_08_05_pus_uvs.fits
wwins J1517-2618_S_2014_08_05_pus_map.win
! wwins: Wrote 2 windows to J1517-2618_S_2014_08_05_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -3.23227e-05 Jy
! Component: 100  -  total flux cleaned = -5.73596e-06 Jy
! Component: 150  -  total flux cleaned = -3.121e-05 Jy
! Component: 200  -  total flux cleaned = -0.000126226 Jy
! Component: 250  -  total flux cleaned = -0.000171764 Jy
! Component: 300  -  total flux cleaned = -0.000172102 Jy
! Component: 350  -  total flux cleaned = -0.00015153 Jy
! Component: 400  -  total flux cleaned = -0.000131332 Jy
! Component: 450  -  total flux cleaned = -7.26708e-05 Jy
! Component: 500  -  total flux cleaned = 3.28067e-06 Jy
! Component: 550  -  total flux cleaned = 3.8083e-06 Jy
! Component: 600  -  total flux cleaned = 0.000113375 Jy
! Component: 650  -  total flux cleaned = 0.000131177 Jy
! Component: 700  -  total flux cleaned = 0.000130956 Jy
! Component: 750  -  total flux cleaned = 0.000182512 Jy
! Component: 800  -  total flux cleaned = 0.000233382 Jy
! Component: 850  -  total flux cleaned = 0.000266661 Jy
! Component: 900  -  total flux cleaned = 0.000283287 Jy
! Component: 950  -  total flux cleaned = 0.00036415 Jy
! Component: 1000  -  total flux cleaned = 0.000363984 Jy
! Component: 1050  -  total flux cleaned = 0.000395531 Jy
! Component: 1100  -  total flux cleaned = 0.00041082 Jy
! Component: 1150  -  total flux cleaned = 0.000395367 Jy
! Component: 1200  -  total flux cleaned = 0.000410503 Jy
! Component: 1250  -  total flux cleaned = 0.000440025 Jy
! Component: 1300  -  total flux cleaned = 0.000395911 Jy
! Component: 1350  -  total flux cleaned = 0.000439512 Jy
! Component: 1400  -  total flux cleaned = 0.000439556 Jy
! Component: 1450  -  total flux cleaned = 0.000481924 Jy
! Component: 1500  -  total flux cleaned = 0.000453718 Jy
! Component: 1550  -  total flux cleaned = 0.000509029 Jy
! Component: 1600  -  total flux cleaned = 0.00049495 Jy
! Component: 1650  -  total flux cleaned = 0.000440614 Jy
! Component: 1700  -  total flux cleaned = 0.000480728 Jy
! Component: 1750  -  total flux cleaned = 0.000480768 Jy
! Component: 1800  -  total flux cleaned = 0.00049405 Jy
! Component: 1850  -  total flux cleaned = 0.000532735 Jy
! Component: 1900  -  total flux cleaned = 0.000506962 Jy
! Component: 1950  -  total flux cleaned = 0.00053228 Jy
! Component: 2000  -  total flux cleaned = 0.000494429 Jy
! Component: 2050  -  total flux cleaned = 0.00048207 Jy
! Component: 2100  -  total flux cleaned = 0.000506731 Jy
! Component: 2150  -  total flux cleaned = 0.000408816 Jy
! Component: 2200  -  total flux cleaned = 0.000493762 Jy
! Component: 2250  -  total flux cleaned = 0.000457586 Jy
! Component: 2300  -  total flux cleaned = 0.00049303 Jy
! Component: 2350  -  total flux cleaned = 0.000434159 Jy
! Component: 2400  -  total flux cleaned = 0.000445948 Jy
! Component: 2450  -  total flux cleaned = 0.000457709 Jy
! Component: 2500  -  total flux cleaned = 0.000480772 Jy
! Component: 2550  -  total flux cleaned = 0.000492104 Jy
! Component: 2600  -  total flux cleaned = 0.000514521 Jy
! Component: 2650  -  total flux cleaned = 0.000458758 Jy
! Component: 2700  -  total flux cleaned = 0.000469917 Jy
! Component: 2750  -  total flux cleaned = 0.000470084 Jy
! Component: 2800  -  total flux cleaned = 0.000480922 Jy
! Component: 2850  -  total flux cleaned = 0.000480753 Jy
! Component: 2900  -  total flux cleaned = 0.000480771 Jy
! Component: 2950  -  total flux cleaned = 0.000459532 Jy
! Component: 3000  -  total flux cleaned = 0.000448944 Jy
! Component: 3050  -  total flux cleaned = 0.000417671 Jy
! Component: 3100  -  total flux cleaned = 0.000407383 Jy
! Component: 3150  -  total flux cleaned = 0.000417633 Jy
! Component: 3200  -  total flux cleaned = 0.00043802 Jy
! Component: 3250  -  total flux cleaned = 0.000417778 Jy
! Component: 3300  -  total flux cleaned = 0.000387632 Jy
! Component: 3350  -  total flux cleaned = 0.000397602 Jy
! Component: 3400  -  total flux cleaned = 0.000357915 Jy
! Component: 3450  -  total flux cleaned = 0.000357935 Jy
! Component: 3500  -  total flux cleaned = 0.000348169 Jy
! Component: 3550  -  total flux cleaned = 0.00036761 Jy
! Component: 3600  -  total flux cleaned = 0.000329047 Jy
! Component: 3650  -  total flux cleaned = 0.000319385 Jy
! Component: 3700  -  total flux cleaned = 0.000281416 Jy
! Component: 3750  -  total flux cleaned = 0.000243637 Jy
! Component: 3800  -  total flux cleaned = 0.000215527 Jy
! Component: 3850  -  total flux cleaned = 0.000159745 Jy
! Component: 3900  -  total flux cleaned = 0.000141262 Jy
! Component: 3950  -  total flux cleaned = 0.000132195 Jy
! Component: 4000  -  total flux cleaned = 8.66778e-05 Jy
! Component: 4050  -  total flux cleaned = 7.75727e-05 Jy
! Total flux subtracted in 4096 components = 5.95786e-05 Jy
! Clean residual min=-0.000574 max=0.000559 Jy/beam
! Clean residual mean=-0.000001 rms=0.000183 Jy/beam
! Combined flux in latest and established models = 0.0862494 Jy
keep
! Adding 293 model components to the UV plane model.
! The established model now contains 426 components and 0.0862494 Jy
![Exited script file: muppet]
wmap "J1517-2618_S_2014_08_05_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.807 x 15.67 at 16.52 degrees (North through East)
! Clean map  min=-0.0013373  max=0.07092 Jy/beam
! Writing clean map to FITS file: J1517-2618_S_2014_08_05_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0709195 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000183752 
device "J1517-2618_S_2014_08_05_pus\_map.eps/VPS"
! Attempting to open device: 'J1517-2618_S_2014_08_05_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.777297 0.777297 1.55459 3.10919 6.21838 12.4368 24.8735 49.747 99.494
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0005 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.07 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.807 x 15.67 at 16.52 degrees (North through East)
! Clean map  min=-0.0013373  max=0.07092 Jy/beam
quit
! Quitting program
! Log file J1517-2618_S_2014_08_05_pus_uvs.log closed on Sun Nov 13 17:31:19 2016