! Started logfile: J1516+1932_S_2015_01_22_pus_uvs.log on Tue Jan 3 22:57:35 2017 obs J1516+1932_S_2015_01_22_pus_uva.fits ! Reading UV FITS file: J1516+1932_S_2015_01_22_pus_uva.fits ! AN table 1: 16 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.622222 visibilities/baseline/integration-bin. ! Found source: J1516+1932 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 281 lines of history. ! ! Reading 1792 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1516+1932_S_2015_01_22_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.661864Jy sigma=0.008320 ! Fit after self-cal, rms=0.653775Jy sigma=0.008216 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.549 mas, bmaj=7.117 mas, bpa=12.82 degrees ! Estimated noise=1758.31 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.261038 Jy ! Component: 100 - total flux cleaned = 0.327713 Jy ! Total flux subtracted in 100 components = 0.327713 Jy ! Clean residual min=-0.014544 max=0.027077 Jy/beam ! Clean residual mean=0.000024 rms=0.004981 Jy/beam ! Combined flux in latest and established models = 0.327713 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.327713 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095696Jy sigma=0.001097 ! Fit after self-cal, rms=0.095613Jy sigma=0.001096 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.071 mas, bmaj=7.762 mas, bpa=11.48 degrees ! Estimated noise=1351.27 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0371609 Jy ! Component: 100 - total flux cleaned = 0.0553601 Jy ! Component: 150 - total flux cleaned = 0.0666001 Jy ! Component: 200 - total flux cleaned = 0.0741215 Jy ! Total flux subtracted in 200 components = 0.0741215 Jy ! Clean residual min=-0.009585 max=0.010846 Jy/beam ! Clean residual mean=0.000010 rms=0.002658 Jy/beam ! Combined flux in latest and established models = 0.401834 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 50 components and 0.401834 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078931Jy sigma=0.000902 ! Fit after self-cal, rms=0.078927Jy sigma=0.000902 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00* HN 1.00* KP 1.11 ! LA 1.09 MK 1.04 NL 0.96 OV 0.99 ! PT 1.03 SC 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00* HN 1.00* KP 1.02 ! LA 1.05 MK 1.02 NL 1.00 OV 1.02 ! PT 1.02 SC 1.07 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00* HN 1.00* KP 0.86 ! LA 0.83 MK 1.05 NL 1.06 OV 0.94 ! PT 1.00 SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.00* HN 1.00* KP 0.79 ! LA 0.91 MK 1.01 NL 1.02 OV 0.98 ! PT 1.02 SC 0.93 ! ! ! Fit before self-cal, rms=0.078927Jy sigma=0.000902 ! Fit after self-cal, rms=0.065070Jy sigma=0.000769 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.098 mas, bmaj=7.839 mas, bpa=11.64 degrees ! Estimated noise=1344.64 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6.5, 7.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00546147 Jy ! Component: 100 - total flux cleaned = 0.00631401 Jy ! Component: 150 - total flux cleaned = 0.00639441 Jy ! Component: 200 - total flux cleaned = 0.00652078 Jy ! Total flux subtracted in 200 components = 0.00652078 Jy ! Clean residual min=-0.004396 max=0.003325 Jy/beam ! Clean residual mean=0.000002 rms=0.000905 Jy/beam ! Combined flux in latest and established models = 0.408355 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 75 components and 0.408355 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064645Jy sigma=0.000762 ! Fit after self-cal, rms=0.064630Jy sigma=0.000762 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064630Jy sigma=0.000762 ! Fit after self-cal, rms=0.064468Jy sigma=0.000762 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.095 mas, bmaj=7.831 mas, bpa=11.69 degrees ! Estimated noise=1341.56 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00131219 Jy ! Component: 100 - total flux cleaned = 0.00120591 Jy ! Component: 150 - total flux cleaned = 0.00107537 Jy ! Component: 200 - total flux cleaned = 0.00100207 Jy ! Total flux subtracted in 200 components = 0.00100207 Jy ! Clean residual min=-0.004087 max=0.002842 Jy/beam ! Clean residual mean=0.000002 rms=0.000813 Jy/beam ! Combined flux in latest and established models = 0.409357 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 85 components and 0.409357 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064403Jy sigma=0.000761 ! Fit after self-cal, rms=0.064397Jy sigma=0.000760 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000115072 Jy ! Component: 100 - total flux cleaned = 8.1247e-05 Jy ! Component: 150 - total flux cleaned = 8.01807e-05 Jy ! Component: 200 - total flux cleaned = 8.09284e-05 Jy ! Total flux subtracted in 200 components = 8.09284e-05 Jy ! Clean residual min=-0.004030 max=0.002871 Jy/beam ! Clean residual mean=0.000002 rms=0.000791 Jy/beam ! Combined flux in latest and established models = 0.409438 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 94 components and 0.409438 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064374Jy sigma=0.000760 ! Fit after self-cal, rms=0.064372Jy sigma=0.000760 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064372Jy sigma=0.000760 ! Fit after self-cal, rms=0.064322Jy sigma=0.000760 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.096 mas, bmaj=7.828 mas, bpa=11.72 degrees ! Estimated noise=1340.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000197514 Jy ! Component: 100 - total flux cleaned = 0.000271045 Jy ! Component: 150 - total flux cleaned = 0.000269735 Jy ! Component: 200 - total flux cleaned = 0.000270158 Jy ! Total flux subtracted in 200 components = 0.000270158 Jy ! Clean residual min=-0.003939 max=0.002903 Jy/beam ! Clean residual mean=0.000002 rms=0.000771 Jy/beam ! Combined flux in latest and established models = 0.409708 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 108 components and 0.409708 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064306Jy sigma=0.000760 ! Fit after self-cal, rms=0.064306Jy sigma=0.000760 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000120159 Jy ! Component: 100 - total flux cleaned = 0.0001216 Jy ! Component: 150 - total flux cleaned = 0.000137437 Jy ! Component: 200 - total flux cleaned = 9.34323e-05 Jy ! Total flux subtracted in 200 components = 9.34323e-05 Jy ! Clean residual min=-0.003939 max=0.002966 Jy/beam ! Clean residual mean=0.000002 rms=0.000766 Jy/beam ! Combined flux in latest and established models = 0.409802 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 116 components and 0.409802 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064298Jy sigma=0.000760 ! Fit after self-cal, rms=0.064298Jy sigma=0.000760 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064298Jy sigma=0.000760 ! Fit after self-cal, rms=0.064283Jy sigma=0.000760 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.535 mas, bmaj=10.83 mas, bpa=-2.903 degrees ! Estimated noise=1688.79 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000138284 Jy ! Component: 100 - total flux cleaned = 0.000194087 Jy ! Component: 150 - total flux cleaned = 0.000270836 Jy ! Component: 200 - total flux cleaned = 0.00029823 Jy ! Total flux subtracted in 200 components = 0.00029823 Jy ! Clean residual min=-0.003882 max=0.003440 Jy/beam ! Clean residual mean=0.000003 rms=0.001068 Jy/beam ! Combined flux in latest and established models = 0.4101 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 124 components and 0.4101 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064286Jy sigma=0.000760 ! Fit after self-cal, rms=0.064283Jy sigma=0.000760 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.12612e-05 Jy ! Component: 100 - total flux cleaned = 6.31948e-05 Jy ! Component: 150 - total flux cleaned = 0.000101188 Jy ! Component: 200 - total flux cleaned = 0.000125583 Jy ! Total flux subtracted in 200 components = 0.000125583 Jy ! Clean residual min=-0.003827 max=0.003471 Jy/beam ! Clean residual mean=0.000003 rms=0.001058 Jy/beam ! Combined flux in latest and established models = 0.410226 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 128 components and 0.410226 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064288Jy sigma=0.000760 ! Fit after self-cal, rms=0.064286Jy sigma=0.000760 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.097 mas, bmaj=7.827 mas, bpa=11.75 degrees ! Estimated noise=1339.8 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.097 x 7.827 at 11.75 degrees (North through East) ! Clean map min=-0.0036357 max=0.33954 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.562 mas, bmaj=7.173 mas, bpa=13.17 degrees ! Estimated noise=1761.11 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.261406 Jy ! Component: 100 - total flux cleaned = 0.328662 Jy ! Component: 150 - total flux cleaned = 0.356401 Jy ! Component: 200 - total flux cleaned = 0.369936 Jy ! Total flux subtracted in 200 components = 0.369936 Jy ! Clean residual min=-0.007131 max=0.008431 Jy/beam ! Clean residual mean=0.000006 rms=0.002026 Jy/beam ! Combined flux in latest and established models = 0.369936 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.369936 Jy ! Inverting map and beam ! Estimated beam: bmin=3.097 mas, bmaj=7.827 mas, bpa=11.75 degrees ! Estimated noise=1339.8 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-18, 39). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0124211 Jy ! Component: 100 - total flux cleaned = 0.0203382 Jy ! Component: 150 - total flux cleaned = 0.0256988 Jy ! Component: 200 - total flux cleaned = 0.029659 Jy ! Total flux subtracted in 200 components = 0.029659 Jy ! Clean residual min=-0.005062 max=0.003703 Jy/beam ! Clean residual mean=0.000007 rms=0.001060 Jy/beam ! Combined flux in latest and established models = 0.399595 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 63 components and 0.399595 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.535 mas, bmaj=10.83 mas, bpa=-2.903 degrees ! Estimated noise=1688.79 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00517099 Jy ! Component: 100 - total flux cleaned = 0.00806214 Jy ! Component: 150 - total flux cleaned = 0.00903392 Jy ! Component: 200 - total flux cleaned = 0.00973347 Jy ! Total flux subtracted in 200 components = 0.00973347 Jy ! Clean residual min=-0.004388 max=0.003257 Jy/beam ! Clean residual mean=0.000004 rms=0.001100 Jy/beam ! Combined flux in latest and established models = 0.409329 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000466183 Jy ! Component: 100 - total flux cleaned = 0.000824712 Jy ! Component: 150 - total flux cleaned = 0.00110265 Jy ! Component: 200 - total flux cleaned = 0.00118747 Jy ! Total flux subtracted in 200 components = 0.00118747 Jy ! Clean residual min=-0.004218 max=0.003373 Jy/beam ! Clean residual mean=0.000003 rms=0.001044 Jy/beam ! Combined flux in latest and established models = 0.410516 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 108 components and 0.410516 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.097 mas, bmaj=7.827 mas, bpa=11.75 degrees ! Estimated noise=1339.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.29725e-05 Jy ! Component: 100 - total flux cleaned = -0.00027772 Jy ! Component: 150 - total flux cleaned = -0.00040828 Jy ! Component: 200 - total flux cleaned = -0.000448061 Jy ! Total flux subtracted in 200 components = -0.000448061 Jy ! Clean residual min=-0.004176 max=0.003007 Jy/beam ! Clean residual mean=0.000002 rms=0.000763 Jy/beam ! Combined flux in latest and established models = 0.410068 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 132 components and 0.410068 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064276Jy sigma=0.000760 ! Fit after self-cal, rms=0.064257Jy sigma=0.000760 wmodel J1516+1932_S_2015_01_22_pus_map.mod ! Writing 132 model components to file: J1516+1932_S_2015_01_22_pus_map.mod wobs J1516+1932_S_2015_01_22_pus_uvs.fits ! Writing UV FITS file: J1516+1932_S_2015_01_22_pus_uvs.fits wwins J1516+1932_S_2015_01_22_pus_map.win ! wwins: Wrote 3 windows to J1516+1932_S_2015_01_22_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00135662 Jy ! Component: 100 - total flux cleaned = -0.00116419 Jy ! Component: 150 - total flux cleaned = -0.00129574 Jy ! Component: 200 - total flux cleaned = -0.00133692 Jy ! Component: 250 - total flux cleaned = -0.00121859 Jy ! Component: 300 - total flux cleaned = -0.00107038 Jy ! Component: 350 - total flux cleaned = -0.000891443 Jy ! Component: 400 - total flux cleaned = -0.000821633 Jy ! Component: 450 - total flux cleaned = -0.000754809 Jy ! Component: 500 - total flux cleaned = -0.000723342 Jy ! Component: 550 - total flux cleaned = -0.000754637 Jy ! Component: 600 - total flux cleaned = -0.00072276 Jy ! Component: 650 - total flux cleaned = -0.000692392 Jy ! Component: 700 - total flux cleaned = -0.000692181 Jy ! Component: 750 - total flux cleaned = -0.000662809 Jy ! Component: 800 - total flux cleaned = -0.000718021 Jy ! Component: 850 - total flux cleaned = -0.00071792 Jy ! Component: 900 - total flux cleaned = -0.0008236 Jy ! Component: 950 - total flux cleaned = -0.00082307 Jy ! Component: 1000 - total flux cleaned = -0.000873883 Jy ! Component: 1050 - total flux cleaned = -0.000973385 Jy ! Component: 1100 - total flux cleaned = -0.00111936 Jy ! Component: 1150 - total flux cleaned = -0.00126262 Jy ! Component: 1200 - total flux cleaned = -0.00137967 Jy ! Component: 1250 - total flux cleaned = -0.00154068 Jy ! Component: 1300 - total flux cleaned = -0.00167607 Jy ! Component: 1350 - total flux cleaned = -0.00180915 Jy ! Component: 1400 - total flux cleaned = -0.00196156 Jy ! Component: 1450 - total flux cleaned = -0.00202593 Jy ! Component: 1500 - total flux cleaned = -0.00206805 Jy ! Component: 1550 - total flux cleaned = -0.00213067 Jy ! Component: 1600 - total flux cleaned = -0.00217165 Jy ! Component: 1650 - total flux cleaned = -0.00227323 Jy ! Component: 1700 - total flux cleaned = -0.0023536 Jy ! Component: 1750 - total flux cleaned = -0.00247245 Jy ! Component: 1800 - total flux cleaned = -0.00253131 Jy ! Component: 1850 - total flux cleaned = -0.00260888 Jy ! Component: 1900 - total flux cleaned = -0.00264716 Jy ! Component: 1950 - total flux cleaned = -0.00270424 Jy ! Component: 2000 - total flux cleaned = -0.00274205 Jy ! Component: 2050 - total flux cleaned = -0.00277906 Jy ! Component: 2100 - total flux cleaned = -0.00277901 Jy ! Component: 2150 - total flux cleaned = -0.00281565 Jy ! Component: 2200 - total flux cleaned = -0.00283385 Jy ! Component: 2250 - total flux cleaned = -0.00294203 Jy ! Component: 2300 - total flux cleaned = -0.00299575 Jy ! Component: 2350 - total flux cleaned = -0.00303147 Jy ! Component: 2400 - total flux cleaned = -0.0031027 Jy ! Component: 2450 - total flux cleaned = -0.0031737 Jy ! Component: 2500 - total flux cleaned = -0.00326203 Jy ! Component: 2550 - total flux cleaned = -0.00331492 Jy ! Component: 2600 - total flux cleaned = -0.00338522 Jy ! Component: 2650 - total flux cleaned = -0.00347273 Jy ! Component: 2700 - total flux cleaned = -0.0035426 Jy ! Component: 2750 - total flux cleaned = -0.00357748 Jy ! Component: 2800 - total flux cleaned = -0.00364704 Jy ! Component: 2850 - total flux cleaned = -0.00373381 Jy ! Component: 2900 - total flux cleaned = -0.00382036 Jy ! Component: 2950 - total flux cleaned = -0.00388949 Jy ! Component: 3000 - total flux cleaned = -0.00394127 Jy ! Component: 3050 - total flux cleaned = -0.00399285 Jy ! Component: 3100 - total flux cleaned = -0.0040789 Jy ! Component: 3150 - total flux cleaned = -0.00413048 Jy ! Component: 3200 - total flux cleaned = -0.00414766 Jy ! Component: 3250 - total flux cleaned = -0.00421643 Jy ! Component: 3300 - total flux cleaned = -0.00423354 Jy ! Component: 3350 - total flux cleaned = -0.00426789 Jy ! Component: 3400 - total flux cleaned = -0.00430229 Jy ! Component: 3450 - total flux cleaned = -0.00433665 Jy ! Component: 3500 - total flux cleaned = -0.00435395 Jy ! Component: 3550 - total flux cleaned = -0.00440556 Jy ! Component: 3600 - total flux cleaned = -0.00440565 Jy ! Component: 3650 - total flux cleaned = -0.00444012 Jy ! Component: 3700 - total flux cleaned = -0.00444013 Jy ! Component: 3750 - total flux cleaned = -0.00450937 Jy ! Component: 3800 - total flux cleaned = -0.00450941 Jy ! Component: 3850 - total flux cleaned = -0.00454419 Jy ! Component: 3900 - total flux cleaned = -0.00454417 Jy ! Component: 3950 - total flux cleaned = -0.00463143 Jy ! Component: 4000 - total flux cleaned = -0.00466649 Jy ! Component: 4050 - total flux cleaned = -0.00473684 Jy ! Total flux subtracted in 4096 components = -0.00478973 Jy ! Clean residual min=-0.001170 max=0.000969 Jy/beam ! Clean residual mean=-0.000001 rms=0.000269 Jy/beam ! Combined flux in latest and established models = 0.405278 Jy keep ! Adding 232 model components to the UV plane model. ! The established model now contains 364 components and 0.405279 Jy ![Exited script file: muppet] wmap "J1516+1932_S_2015_01_22_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.097 x 7.827 at 11.75 degrees (North through East) ! Clean map min=-0.0022125 max=0.34041 Jy/beam ! Writing clean map to FITS file: J1516+1932_S_2015_01_22_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.340407 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000254686 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.224454 0.224454 0.448909 0.897818 1.79564 3.59127 7.18254 14.3651 28.7302 57.4603 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.34 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.097 x 7.827 at 11.75 degrees (North through East) ! Clean map min=-0.0022125 max=0.34041 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1516+1932_S_2015_01_22_pus_uvs.log closed on Tue Jan 3 22:57:39 2017