! Started logfile: J1511-3242_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:30:42 2017 obs J1511-3242_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J1511-3242_S_2014_01_04_pus_uva.fits ! AN table 1: 125 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.429333 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1511-3242 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 7728 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1511-3242_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 376 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 376 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 376 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 376 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.867506Jy sigma=0.008908 ! Fit after self-cal, rms=0.819462Jy sigma=0.008410 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.405 mas, bmaj=7.105 mas, bpa=-3.433 degrees ! Estimated noise=1338.76 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.133559 Jy ! Component: 100 - total flux cleaned = 0.173168 Jy ! Total flux subtracted in 100 components = 0.173168 Jy ! Clean residual min=-0.015149 max=0.017778 Jy/beam ! Clean residual mean=0.000436 rms=0.003625 Jy/beam ! Combined flux in latest and established models = 0.173168 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.173168 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116783Jy sigma=0.001042 ! Fit after self-cal, rms=0.116786Jy sigma=0.001041 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.052 mas, bmaj=8.491 mas, bpa=-4.771 degrees ! Estimated noise=817.49 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0264544 Jy ! Component: 100 - total flux cleaned = 0.0391105 Jy ! Component: 150 - total flux cleaned = 0.04561 Jy ! Component: 200 - total flux cleaned = 0.04917 Jy ! Total flux subtracted in 200 components = 0.04917 Jy ! Clean residual min=-0.011245 max=0.016175 Jy/beam ! Clean residual mean=0.000771 rms=0.003668 Jy/beam ! Combined flux in latest and established models = 0.222338 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 29 components and 0.222338 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109768Jy sigma=0.000995 ! Fit after self-cal, rms=0.109805Jy sigma=0.000995 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.00* KP 1.00* LA 1.02 ! MK 1.00 NL 1.00 OV 0.95 PT 0.96 ! SC 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 1.00* KP 1.00* LA 1.00 ! MK 0.98 NL 1.04 OV 0.96 PT 1.01 ! SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.18 FD 1.00* KP 1.00* LA 0.79 ! MK 1.04 NL 1.07 OV 0.94 PT 0.93 ! SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.00* KP 1.00* LA 0.90 ! MK 1.00 NL 1.15 OV 0.99 PT 0.95 ! SC 1.02 ! ! ! Fit before self-cal, rms=0.109805Jy sigma=0.000995 ! Fit after self-cal, rms=0.113177Jy sigma=0.000972 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.052 mas, bmaj=8.567 mas, bpa=-4.741 degrees ! Estimated noise=829.638 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0035064 Jy ! Component: 100 - total flux cleaned = 0.00443173 Jy ! Component: 150 - total flux cleaned = 0.00448541 Jy ! Component: 200 - total flux cleaned = 0.00453444 Jy ! Total flux subtracted in 200 components = 0.00453444 Jy ! Clean residual min=-0.010095 max=0.013361 Jy/beam ! Clean residual mean=0.000563 rms=0.003188 Jy/beam ! Combined flux in latest and established models = 0.226873 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 33 components and 0.226873 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112941Jy sigma=0.000972 ! Fit after self-cal, rms=0.112735Jy sigma=0.000971 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112735Jy sigma=0.000971 ! Fit after self-cal, rms=0.107537Jy sigma=0.000960 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.028 mas, bmaj=8.509 mas, bpa=-4.734 degrees ! Estimated noise=835.469 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00285077 Jy ! Component: 100 - total flux cleaned = 0.00346364 Jy ! Component: 150 - total flux cleaned = 0.00365104 Jy ! Component: 200 - total flux cleaned = 0.00369224 Jy ! Total flux subtracted in 200 components = 0.00369224 Jy ! Clean residual min=-0.008280 max=0.013703 Jy/beam ! Clean residual mean=0.000348 rms=0.002710 Jy/beam ! Combined flux in latest and established models = 0.230565 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 35 components and 0.230565 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107389Jy sigma=0.000960 ! Fit after self-cal, rms=0.107362Jy sigma=0.000959 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-39, -122.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.011984 Jy ! Component: 100 - total flux cleaned = 0.0170933 Jy ! Component: 150 - total flux cleaned = 0.0204254 Jy ! Component: 200 - total flux cleaned = 0.0229438 Jy ! Total flux subtracted in 200 components = 0.0229438 Jy ! Clean residual min=-0.006867 max=0.007399 Jy/beam ! Clean residual mean=0.000145 rms=0.001881 Jy/beam ! Combined flux in latest and established models = 0.253509 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 69 components and 0.253509 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106154Jy sigma=0.000945 ! Fit after self-cal, rms=0.106080Jy sigma=0.000944 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106080Jy sigma=0.000944 ! Fit after self-cal, rms=0.105822Jy sigma=0.000943 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.025 mas, bmaj=8.5 mas, bpa=-4.733 degrees ! Estimated noise=838.158 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00320305 Jy ! Component: 100 - total flux cleaned = 0.00537621 Jy ! Component: 150 - total flux cleaned = 0.00662067 Jy ! Component: 200 - total flux cleaned = 0.00737749 Jy ! Total flux subtracted in 200 components = 0.00737749 Jy ! Clean residual min=-0.006819 max=0.006776 Jy/beam ! Clean residual mean=0.000009 rms=0.001641 Jy/beam ! Combined flux in latest and established models = 0.260886 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 84 components and 0.260886 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105661Jy sigma=0.000942 ! Fit after self-cal, rms=0.105672Jy sigma=0.000942 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000603306 Jy ! Component: 100 - total flux cleaned = 0.00117728 Jy ! Component: 150 - total flux cleaned = 0.00164254 Jy ! Component: 200 - total flux cleaned = 0.00202076 Jy ! Total flux subtracted in 200 components = 0.00202076 Jy ! Clean residual min=-0.006669 max=0.006797 Jy/beam ! Clean residual mean=0.000002 rms=0.001626 Jy/beam ! Combined flux in latest and established models = 0.262907 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 87 components and 0.262907 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105621Jy sigma=0.000942 ! Fit after self-cal, rms=0.105611Jy sigma=0.000942 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105611Jy sigma=0.000942 ! Fit after self-cal, rms=0.106543Jy sigma=0.000942 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.603 mas, bmaj=20.41 mas, bpa=3.804 degrees ! Estimated noise=1059.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00287033 Jy ! Component: 100 - total flux cleaned = 0.0044944 Jy ! Component: 150 - total flux cleaned = 0.00525801 Jy ! Component: 200 - total flux cleaned = 0.00550109 Jy ! Total flux subtracted in 200 components = 0.00550109 Jy ! Clean residual min=-0.008629 max=0.008448 Jy/beam ! Clean residual mean=-0.000077 rms=0.002586 Jy/beam ! Combined flux in latest and established models = 0.268408 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 95 components and 0.268408 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106488Jy sigma=0.000942 ! Fit after self-cal, rms=0.106471Jy sigma=0.000942 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000161108 Jy ! Component: 100 - total flux cleaned = 0.000249221 Jy ! Component: 150 - total flux cleaned = 0.00043396 Jy ! Component: 200 - total flux cleaned = 0.000589577 Jy ! Total flux subtracted in 200 components = 0.000589577 Jy ! Clean residual min=-0.008742 max=0.008435 Jy/beam ! Clean residual mean=-0.000084 rms=0.002592 Jy/beam ! Combined flux in latest and established models = 0.268998 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 98 components and 0.268998 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106489Jy sigma=0.000942 ! Fit after self-cal, rms=0.106466Jy sigma=0.000942 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.02 mas, bmaj=8.496 mas, bpa=-4.797 degrees ! Estimated noise=845.095 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.02 x 8.496 at -4.797 degrees (North through East) ! Clean map min=-0.00626 max=0.18465 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.37 mas, bmaj=7.082 mas, bpa=-3.4 degrees ! Estimated noise=1392.04 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.138553 Jy ! Component: 100 - total flux cleaned = 0.183318 Jy ! Component: 150 - total flux cleaned = 0.206479 Jy ! Component: 200 - total flux cleaned = 0.22077 Jy ! Total flux subtracted in 200 components = 0.22077 Jy ! Clean residual min=-0.009609 max=0.009618 Jy/beam ! Clean residual mean=0.000142 rms=0.002406 Jy/beam ! Combined flux in latest and established models = 0.22077 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.22077 Jy ! Inverting map and beam ! Estimated beam: bmin=3.02 mas, bmaj=8.496 mas, bpa=-4.797 degrees ! Estimated noise=845.095 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0117795 Jy ! Component: 100 - total flux cleaned = 0.0201119 Jy ! Component: 150 - total flux cleaned = 0.0262334 Jy ! Component: 200 - total flux cleaned = 0.0308991 Jy ! Total flux subtracted in 200 components = 0.0308991 Jy ! Clean residual min=-0.006778 max=0.006388 Jy/beam ! Clean residual mean=0.000076 rms=0.001820 Jy/beam ! Combined flux in latest and established models = 0.25167 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 42 components and 0.25167 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.603 mas, bmaj=20.41 mas, bpa=3.804 degrees ! Estimated noise=1059.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00581207 Jy ! Component: 100 - total flux cleaned = 0.00964988 Jy ! Component: 150 - total flux cleaned = 0.0122676 Jy ! Component: 200 - total flux cleaned = 0.014075 Jy ! Total flux subtracted in 200 components = 0.014075 Jy ! Clean residual min=-0.008811 max=0.008315 Jy/beam ! Clean residual mean=-0.000064 rms=0.002617 Jy/beam ! Combined flux in latest and established models = 0.265745 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00125272 Jy ! Component: 100 - total flux cleaned = 0.00212237 Jy ! Component: 150 - total flux cleaned = 0.00272632 Jy ! Component: 200 - total flux cleaned = 0.00286133 Jy ! Total flux subtracted in 200 components = 0.00286133 Jy ! Clean residual min=-0.008767 max=0.008435 Jy/beam ! Clean residual mean=-0.000122 rms=0.002581 Jy/beam ! Combined flux in latest and established models = 0.268606 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 67 components and 0.268606 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.02 mas, bmaj=8.496 mas, bpa=-4.797 degrees ! Estimated noise=845.095 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000642816 Jy ! Component: 100 - total flux cleaned = 0.000639801 Jy ! Component: 150 - total flux cleaned = 0.000545166 Jy ! Component: 200 - total flux cleaned = 0.000457283 Jy ! Total flux subtracted in 200 components = 0.000457283 Jy ! Clean residual min=-0.006284 max=0.006838 Jy/beam ! Clean residual mean=-0.000039 rms=0.001591 Jy/beam ! Combined flux in latest and established models = 0.269063 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 85 components and 0.269063 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106434Jy sigma=0.000942 ! Fit after self-cal, rms=0.106416Jy sigma=0.000941 wmodel J1511-3242_S_2014_01_04_pus_map.mod ! Writing 85 model components to file: J1511-3242_S_2014_01_04_pus_map.mod wobs J1511-3242_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J1511-3242_S_2014_01_04_pus_uvs.fits wwins J1511-3242_S_2014_01_04_pus_map.win ! wwins: Wrote 2 windows to J1511-3242_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000652898 Jy ! Component: 100 - total flux cleaned = 0.000157195 Jy ! Component: 150 - total flux cleaned = -0.000359031 Jy ! Component: 200 - total flux cleaned = -0.000900716 Jy ! Component: 250 - total flux cleaned = -0.00161785 Jy ! Component: 300 - total flux cleaned = -0.00234795 Jy ! Component: 350 - total flux cleaned = -0.00309349 Jy ! Component: 400 - total flux cleaned = -0.00379527 Jy ! Component: 450 - total flux cleaned = -0.00429799 Jy ! Component: 500 - total flux cleaned = -0.00482556 Jy ! Component: 550 - total flux cleaned = -0.00507667 Jy ! Component: 600 - total flux cleaned = -0.0052696 Jy ! Component: 650 - total flux cleaned = -0.00531728 Jy ! Component: 700 - total flux cleaned = -0.00549554 Jy ! Component: 750 - total flux cleaned = -0.00562334 Jy ! Component: 800 - total flux cleaned = -0.00566371 Jy ! Component: 850 - total flux cleaned = -0.00562375 Jy ! Component: 900 - total flux cleaned = -0.00562383 Jy ! Component: 950 - total flux cleaned = -0.00558696 Jy ! Component: 1000 - total flux cleaned = -0.00566008 Jy ! Component: 1050 - total flux cleaned = -0.00569457 Jy ! Component: 1100 - total flux cleaned = -0.00576209 Jy ! Component: 1150 - total flux cleaned = -0.00579433 Jy ! Component: 1200 - total flux cleaned = -0.00585861 Jy ! Component: 1250 - total flux cleaned = -0.00585749 Jy ! Component: 1300 - total flux cleaned = -0.00604418 Jy ! Component: 1350 - total flux cleaned = -0.00616601 Jy ! Component: 1400 - total flux cleaned = -0.00637515 Jy ! Component: 1450 - total flux cleaned = -0.00657942 Jy ! Component: 1500 - total flux cleaned = -0.00655059 Jy ! Component: 1550 - total flux cleaned = -0.00666411 Jy ! Component: 1600 - total flux cleaned = -0.00663579 Jy ! Component: 1650 - total flux cleaned = -0.00671835 Jy ! Component: 1700 - total flux cleaned = -0.00671849 Jy ! Component: 1750 - total flux cleaned = -0.00679878 Jy ! Component: 1800 - total flux cleaned = -0.00677225 Jy ! Component: 1850 - total flux cleaned = -0.00685093 Jy ! Component: 1900 - total flux cleaned = -0.00692824 Jy ! Component: 1950 - total flux cleaned = -0.00687668 Jy ! Component: 2000 - total flux cleaned = -0.0069022 Jy ! Component: 2050 - total flux cleaned = -0.00690205 Jy ! Component: 2100 - total flux cleaned = -0.00695154 Jy ! Component: 2150 - total flux cleaned = -0.00690207 Jy ! Component: 2200 - total flux cleaned = -0.00685333 Jy ! Component: 2250 - total flux cleaned = -0.00682912 Jy ! Component: 2300 - total flux cleaned = -0.00682906 Jy ! Component: 2350 - total flux cleaned = -0.00678169 Jy ! Component: 2400 - total flux cleaned = -0.00678163 Jy ! Component: 2450 - total flux cleaned = -0.00668873 Jy ! Component: 2500 - total flux cleaned = -0.00675816 Jy ! Component: 2550 - total flux cleaned = -0.00680412 Jy ! Component: 2600 - total flux cleaned = -0.0068497 Jy ! Component: 2650 - total flux cleaned = -0.00694005 Jy ! Component: 2700 - total flux cleaned = -0.00702963 Jy ! Component: 2750 - total flux cleaned = -0.00709639 Jy ! Component: 2800 - total flux cleaned = -0.00714083 Jy ! Component: 2850 - total flux cleaned = -0.00729523 Jy ! Component: 2900 - total flux cleaned = -0.00740496 Jy ! Component: 2950 - total flux cleaned = -0.00747045 Jy ! Component: 3000 - total flux cleaned = -0.00751398 Jy ! Component: 3050 - total flux cleaned = -0.00760066 Jy ! Component: 3100 - total flux cleaned = -0.00760063 Jy ! Component: 3150 - total flux cleaned = -0.00766521 Jy ! Component: 3200 - total flux cleaned = -0.00772947 Jy ! Component: 3250 - total flux cleaned = -0.00779338 Jy ! Component: 3300 - total flux cleaned = -0.00781472 Jy ! Component: 3350 - total flux cleaned = -0.00800582 Jy ! Component: 3400 - total flux cleaned = -0.00809056 Jy ! Component: 3450 - total flux cleaned = -0.00825971 Jy ! Component: 3500 - total flux cleaned = -0.00836505 Jy ! Component: 3550 - total flux cleaned = -0.00849132 Jy ! Component: 3600 - total flux cleaned = -0.00859641 Jy ! Component: 3650 - total flux cleaned = -0.00870154 Jy ! Component: 3700 - total flux cleaned = -0.00880646 Jy ! Component: 3750 - total flux cleaned = -0.00895308 Jy ! Component: 3800 - total flux cleaned = -0.00901596 Jy ! Component: 3850 - total flux cleaned = -0.00914146 Jy ! Component: 3900 - total flux cleaned = -0.00928785 Jy ! Component: 3950 - total flux cleaned = -0.00943409 Jy ! Component: 4000 - total flux cleaned = -0.00953852 Jy ! Component: 4050 - total flux cleaned = -0.00962209 Jy ! Total flux subtracted in 4096 components = -0.00978917 Jy ! Clean residual min=-0.001388 max=0.001331 Jy/beam ! Clean residual mean=-0.000014 rms=0.000351 Jy/beam ! Combined flux in latest and established models = 0.259274 Jy keep ! Adding 283 model components to the UV plane model. ! The established model now contains 368 components and 0.259274 Jy ![Exited script file: muppet] wmap "J1511-3242_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.02 x 8.496 at -4.797 degrees (North through East) ! Clean map min=-0.0025866 max=0.18684 Jy/beam ! Writing clean map to FITS file: J1511-3242_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.186837 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000343403 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.551395 0.551395 1.10279 2.20558 4.41116 8.82232 17.6446 35.2893 70.5786 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.186 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.02 x 8.496 at -4.797 degrees (North through East) ! Clean map min=-0.0025866 max=0.18684 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1511-3242_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:30:47 2017