! Started logfile: J1511+0518_X_2015_03_17_pus_uvs.log on Sat Dec 31 19:08:04 2016 obs J1511+0518_X_2015_03_17_pus_uva.fits ! Reading UV FITS file: J1511+0518_X_2015_03_17_pus_uva.fits ! AN table 1: 84 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.876984 visibilities/baseline/integration-bin. ! Found source: J1511+0518 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 39780 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J1511+0518_X_2015_03_17_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.741840Jy sigma=0.008668 ! Fit after self-cal, rms=0.635263Jy sigma=0.007413 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7949 mas, bmaj=1.746 mas, bpa=-0.2483 degrees ! Estimated noise=630.417 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.28371 Jy ! Component: 100 - total flux cleaned = 0.39225 Jy ! Total flux subtracted in 100 components = 0.39225 Jy ! Clean residual min=-0.021748 max=0.052374 Jy/beam ! Clean residual mean=-0.000161 rms=0.007644 Jy/beam ! Combined flux in latest and established models = 0.39225 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.39225 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.148244Jy sigma=0.001689 ! Fit after self-cal, rms=0.147428Jy sigma=0.001681 ! Inverting map ! Added new window around map position (-0.8, -0.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0603878 Jy ! Component: 100 - total flux cleaned = 0.0942001 Jy ! Total flux subtracted in 100 components = 0.0942001 Jy ! Clean residual min=-0.016775 max=0.031230 Jy/beam ! Clean residual mean=-0.000037 rms=0.005267 Jy/beam ! Combined flux in latest and established models = 0.48645 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 23 components and 0.48645 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.113457Jy sigma=0.001256 ! Fit after self-cal, rms=0.112571Jy sigma=0.001248 ! Inverting map ! Added new window around map position (4.8, -0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0312176 Jy ! Component: 100 - total flux cleaned = 0.0499771 Jy ! Total flux subtracted in 100 components = 0.0499771 Jy ! Clean residual min=-0.014991 max=0.016900 Jy/beam ! Clean residual mean=0.000008 rms=0.004369 Jy/beam ! Combined flux in latest and established models = 0.536427 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 32 components and 0.536427 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.102098Jy sigma=0.001118 ! Fit after self-cal, rms=0.101422Jy sigma=0.001108 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9536 mas, bmaj=2.001 mas, bpa=0.7252 degrees ! Estimated noise=302.374 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.019927 Jy ! Component: 100 - total flux cleaned = 0.0328625 Jy ! Component: 150 - total flux cleaned = 0.0424062 Jy ! Component: 200 - total flux cleaned = 0.0495689 Jy ! Total flux subtracted in 200 components = 0.0495689 Jy ! Clean residual min=-0.018461 max=0.016550 Jy/beam ! Clean residual mean=0.000133 rms=0.004350 Jy/beam ! Combined flux in latest and established models = 0.585996 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 49 components and 0.585996 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.096024Jy sigma=0.001055 ! Fit after self-cal, rms=0.095774Jy sigma=0.001051 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.09 HN 1.12 KP 0.93 ! LA 1.01 MK 1.00 NL 0.99 OV 1.00 ! PT 1.01 SC 1.04 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.10 HN 1.14 KP 0.88 ! LA 1.02 MK 1.00 NL 1.00 OV 0.99 ! PT 0.97 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.09 HN 1.16 KP 0.84 ! LA 1.05 MK 0.99 NL 1.01 OV 1.00 ! PT 0.95 SC 1.05 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.07 HN 1.13 KP 0.80 ! LA 1.05 MK 1.01 NL 1.01 OV 1.00 ! PT 0.96 SC 1.05 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.09 HN 1.08 KP 0.75 ! LA 1.05 MK 1.00 NL 1.02 OV 1.02 ! PT 0.97 SC 1.03 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.09 HN 1.14 KP 0.75 ! LA 1.05 MK 0.99 NL 1.03 OV 1.03 ! PT 0.95 SC 1.03 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.11 HN 1.21 KP 0.74 ! LA 1.06 MK 0.98 NL 1.02 OV 1.06 ! PT 0.97 SC 1.04 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.15 HN 1.20 KP 0.75 ! LA 1.05 MK 0.97 NL 1.03 OV 1.05 ! PT 0.97 SC 1.04 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.12 HN 1.23 KP 0.77 ! LA 1.06 MK 0.99 NL 1.03 OV 1.05 ! PT 0.99 SC 1.00 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.12 HN 1.19 KP 0.81 ! LA 1.09 MK 0.97 NL 1.03 OV 1.05 ! PT 0.97 SC 1.01 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.13 HN 1.19 KP 0.84 ! LA 1.08 MK 0.98 NL 1.03 OV 1.04 ! PT 1.00 SC 1.02 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.13 HN 1.16 KP 0.85 ! LA 1.07 MK 0.97 NL 1.04 OV 1.04 ! PT 1.00 SC 1.03 ! ! ! Fit before self-cal, rms=0.095774Jy sigma=0.001051 ! Fit after self-cal, rms=0.075018Jy sigma=0.000826 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9604 mas, bmaj=2.006 mas, bpa=0.5829 degrees ! Estimated noise=301.184 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.8, -0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0109597 Jy ! Component: 100 - total flux cleaned = 0.0173063 Jy ! Component: 150 - total flux cleaned = 0.0186446 Jy ! Component: 200 - total flux cleaned = 0.0188067 Jy ! Total flux subtracted in 200 components = 0.0188067 Jy ! Clean residual min=-0.004233 max=0.006484 Jy/beam ! Clean residual mean=0.000015 rms=0.001210 Jy/beam ! Combined flux in latest and established models = 0.604803 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 65 components and 0.604803 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073163Jy sigma=0.000803 ! Fit after self-cal, rms=0.073103Jy sigma=0.000801 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073103Jy sigma=0.000801 ! Fit after self-cal, rms=0.072868Jy sigma=0.000798 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9558 mas, bmaj=2.001 mas, bpa=0.2665 degrees ! Estimated noise=301.164 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.005428 Jy ! Component: 100 - total flux cleaned = 0.00699656 Jy ! Component: 150 - total flux cleaned = 0.00712552 Jy ! Component: 200 - total flux cleaned = 0.0072438 Jy ! Total flux subtracted in 200 components = 0.0072438 Jy ! Clean residual min=-0.003278 max=0.005096 Jy/beam ! Clean residual mean=0.000012 rms=0.000928 Jy/beam ! Combined flux in latest and established models = 0.612046 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 77 components and 0.612046 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072244Jy sigma=0.000791 ! Fit after self-cal, rms=0.072226Jy sigma=0.000790 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (14.4, -10.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00318611 Jy ! Component: 100 - total flux cleaned = 0.00390646 Jy ! Component: 150 - total flux cleaned = 0.00390834 Jy ! Component: 200 - total flux cleaned = 0.00391219 Jy ! Total flux subtracted in 200 components = 0.00391219 Jy ! Clean residual min=-0.002790 max=0.004147 Jy/beam ! Clean residual mean=0.000012 rms=0.000779 Jy/beam ! Combined flux in latest and established models = 0.615959 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 93 components and 0.615959 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071829Jy sigma=0.000786 ! Fit after self-cal, rms=0.071810Jy sigma=0.000785 ! Inverting map ! Added new window around map position (10.8, -8.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00249553 Jy ! Component: 100 - total flux cleaned = 0.0024999 Jy ! Component: 150 - total flux cleaned = 0.00223172 Jy ! Component: 200 - total flux cleaned = 0.0020653 Jy ! Total flux subtracted in 200 components = 0.0020653 Jy ! Clean residual min=-0.002557 max=0.002922 Jy/beam ! Clean residual mean=0.000009 rms=0.000685 Jy/beam ! Combined flux in latest and established models = 0.618024 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 109 components and 0.618024 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071493Jy sigma=0.000782 ! Fit after self-cal, rms=0.071480Jy sigma=0.000782 ! Inverting map ! Added new window around map position (-13.6, 19.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00158812 Jy ! Component: 100 - total flux cleaned = 0.00207414 Jy ! Component: 150 - total flux cleaned = 0.00200195 Jy ! Component: 200 - total flux cleaned = 0.00200453 Jy ! Total flux subtracted in 200 components = 0.00200453 Jy ! Clean residual min=-0.002278 max=0.002578 Jy/beam ! Clean residual mean=0.000009 rms=0.000614 Jy/beam ! Combined flux in latest and established models = 0.620028 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 124 components and 0.620028 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071288Jy sigma=0.000780 ! Fit after self-cal, rms=0.071280Jy sigma=0.000780 ! Inverting map ! Added new window around map position (-8.2, -19.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00131847 Jy ! Component: 100 - total flux cleaned = 0.00145578 Jy ! Component: 150 - total flux cleaned = 0.0013399 Jy ! Component: 200 - total flux cleaned = 0.0012292 Jy ! Total flux subtracted in 200 components = 0.0012292 Jy ! Clean residual min=-0.002336 max=0.002201 Jy/beam ! Clean residual mean=0.000008 rms=0.000555 Jy/beam ! Combined flux in latest and established models = 0.621258 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 138 components and 0.621258 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071146Jy sigma=0.000779 ! Fit after self-cal, rms=0.071138Jy sigma=0.000779 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071138Jy sigma=0.000779 ! Fit after self-cal, rms=0.070930Jy sigma=0.000778 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9546 mas, bmaj=2 mas, bpa=0.08192 degrees ! Estimated noise=300.656 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000454801 Jy ! Component: 100 - total flux cleaned = 0.000512662 Jy ! Component: 150 - total flux cleaned = 0.000676974 Jy ! Component: 200 - total flux cleaned = 0.000729581 Jy ! Total flux subtracted in 200 components = 0.000729581 Jy ! Clean residual min=-0.001716 max=0.001934 Jy/beam ! Clean residual mean=-0.000000 rms=0.000470 Jy/beam ! Combined flux in latest and established models = 0.621987 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 154 components and 0.621987 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070832Jy sigma=0.000777 ! Fit after self-cal, rms=0.070831Jy sigma=0.000777 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00022891 Jy ! Component: 100 - total flux cleaned = 0.000137224 Jy ! Component: 150 - total flux cleaned = 9.4618e-05 Jy ! Component: 200 - total flux cleaned = 5.39317e-05 Jy ! Total flux subtracted in 200 components = 5.39317e-05 Jy ! Clean residual min=-0.001660 max=0.001801 Jy/beam ! Clean residual mean=0.000001 rms=0.000441 Jy/beam ! Combined flux in latest and established models = 0.622041 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 166 components and 0.622041 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070772Jy sigma=0.000776 ! Fit after self-cal, rms=0.070770Jy sigma=0.000776 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070770Jy sigma=0.000776 ! Fit after self-cal, rms=0.070696Jy sigma=0.000776 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.275 mas, bmaj=3.233 mas, bpa=-3.592 degrees ! Estimated noise=363.977 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000311336 Jy ! Component: 100 - total flux cleaned = 0.000388853 Jy ! Component: 150 - total flux cleaned = 0.00026692 Jy ! Component: 200 - total flux cleaned = 8.00608e-05 Jy ! Total flux subtracted in 200 components = 8.00608e-05 Jy ! Clean residual min=-0.001264 max=0.001155 Jy/beam ! Clean residual mean=-0.000004 rms=0.000366 Jy/beam ! Combined flux in latest and established models = 0.622121 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 183 components and 0.622121 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070678Jy sigma=0.000776 ! Fit after self-cal, rms=0.070679Jy sigma=0.000776 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000105262 Jy ! Component: 100 - total flux cleaned = -0.000267307 Jy ! Component: 150 - total flux cleaned = -0.00039304 Jy ! Component: 200 - total flux cleaned = -0.000490044 Jy ! Total flux subtracted in 200 components = -0.000490044 Jy ! Clean residual min=-0.001152 max=0.001091 Jy/beam ! Clean residual mean=-0.000002 rms=0.000344 Jy/beam ! Combined flux in latest and established models = 0.621631 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 198 components and 0.621631 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070671Jy sigma=0.000776 ! Fit after self-cal, rms=0.070670Jy sigma=0.000776 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.9539 mas, bmaj=2 mas, bpa=-0.01894 degrees ! Estimated noise=300.426 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9539 x 2 at -0.01894 degrees (North through East) ! Clean map min=-0.002802 max=0.35738 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7958 mas, bmaj=1.741 mas, bpa=-0.821 degrees ! Estimated noise=628.789 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.28558 Jy ! Component: 100 - total flux cleaned = 0.397853 Jy ! Component: 150 - total flux cleaned = 0.45717 Jy ! Component: 200 - total flux cleaned = 0.496664 Jy ! Total flux subtracted in 200 components = 0.496664 Jy ! Clean residual min=-0.011146 max=0.021667 Jy/beam ! Clean residual mean=-0.000104 rms=0.003408 Jy/beam ! Combined flux in latest and established models = 0.496664 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.496664 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9539 mas, bmaj=2 mas, bpa=-0.01894 degrees ! Estimated noise=300.426 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.034856 Jy ! Component: 100 - total flux cleaned = 0.0574684 Jy ! Component: 150 - total flux cleaned = 0.0732355 Jy ! Component: 200 - total flux cleaned = 0.0847554 Jy ! Total flux subtracted in 200 components = 0.0847554 Jy ! Clean residual min=-0.004268 max=0.008275 Jy/beam ! Clean residual mean=-0.000051 rms=0.001427 Jy/beam ! Combined flux in latest and established models = 0.58142 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 53 components and 0.58142 Jy ! Inverting map ! Added new window around map position (1, 0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00909211 Jy ! Component: 100 - total flux cleaned = 0.015964 Jy ! Component: 150 - total flux cleaned = 0.0214334 Jy ! Component: 200 - total flux cleaned = 0.0259072 Jy ! Total flux subtracted in 200 components = 0.0259072 Jy ! Clean residual min=-0.002753 max=0.003746 Jy/beam ! Clean residual mean=-0.000020 rms=0.000788 Jy/beam ! Combined flux in latest and established models = 0.607327 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 85 components and 0.607327 Jy ! Inverting map ! Added new window around map position (4.4, -13.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00400511 Jy ! Component: 100 - total flux cleaned = 0.00647191 Jy ! Component: 150 - total flux cleaned = 0.00840393 Jy ! Component: 200 - total flux cleaned = 0.00982133 Jy ! Total flux subtracted in 200 components = 0.00982133 Jy ! Clean residual min=-0.002189 max=0.002711 Jy/beam ! Clean residual mean=-0.000009 rms=0.000603 Jy/beam ! Combined flux in latest and established models = 0.617148 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 116 components and 0.617149 Jy ! Inverting map ! Added new window around map position (-5.2, 10.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00141543 Jy ! Component: 100 - total flux cleaned = 0.00187997 Jy ! Component: 150 - total flux cleaned = 0.00254788 Jy ! Component: 200 - total flux cleaned = 0.00285643 Jy ! Total flux subtracted in 200 components = 0.00285643 Jy ! Clean residual min=-0.001879 max=0.002407 Jy/beam ! Clean residual mean=-0.000006 rms=0.000501 Jy/beam ! Combined flux in latest and established models = 0.620005 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 136 components and 0.620005 Jy ! Inverting map ! Added new window around map position (-10.2, 10.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00150103 Jy ! Component: 100 - total flux cleaned = 0.00178617 Jy ! Component: 150 - total flux cleaned = 0.00211571 Jy ! Component: 200 - total flux cleaned = 0.00242588 Jy ! Total flux subtracted in 200 components = 0.00242588 Jy ! Clean residual min=-0.001739 max=0.001801 Jy/beam ! Clean residual mean=-0.000004 rms=0.000432 Jy/beam ! Combined flux in latest and established models = 0.622431 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 158 components and 0.622431 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.275 mas, bmaj=3.233 mas, bpa=-3.592 degrees ! Estimated noise=363.977 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00112097 Jy ! Component: 100 - total flux cleaned = 0.0016444 Jy ! Component: 150 - total flux cleaned = 0.00177744 Jy ! Component: 200 - total flux cleaned = 0.00180936 Jy ! Total flux subtracted in 200 components = 0.00180936 Jy ! Clean residual min=-0.001086 max=0.001268 Jy/beam ! Clean residual mean=-0.000001 rms=0.000332 Jy/beam ! Combined flux in latest and established models = 0.62424 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.23517e-05 Jy ! Component: 100 - total flux cleaned = 5.24649e-05 Jy ! Component: 150 - total flux cleaned = 7.46158e-05 Jy ! Component: 200 - total flux cleaned = 1.18354e-05 Jy ! Total flux subtracted in 200 components = 1.18354e-05 Jy ! Clean residual min=-0.000974 max=0.001160 Jy/beam ! Clean residual mean=-0.000001 rms=0.000310 Jy/beam ! Combined flux in latest and established models = 0.624252 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 193 components and 0.624252 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9539 mas, bmaj=2 mas, bpa=-0.01894 degrees ! Estimated noise=300.426 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000655192 Jy ! Component: 100 - total flux cleaned = -0.000710925 Jy ! Component: 150 - total flux cleaned = -0.000712054 Jy ! Component: 200 - total flux cleaned = -0.000663739 Jy ! Total flux subtracted in 200 components = -0.000663739 Jy ! Clean residual min=-0.001507 max=0.001394 Jy/beam ! Clean residual mean=-0.000001 rms=0.000359 Jy/beam ! Combined flux in latest and established models = 0.623588 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 210 components and 0.623588 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070598Jy sigma=0.000775 ! Fit after self-cal, rms=0.070547Jy sigma=0.000774 wmodel J1511+0518_X_2015_03_17_pus_map.mod ! Writing 210 model components to file: J1511+0518_X_2015_03_17_pus_map.mod wobs J1511+0518_X_2015_03_17_pus_uvs.fits ! Writing UV FITS file: J1511+0518_X_2015_03_17_pus_uvs.fits wwins J1511+0518_X_2015_03_17_pus_map.win ! wwins: Wrote 12 windows to J1511+0518_X_2015_03_17_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 4.32764e-05 Jy ! Component: 100 - total flux cleaned = 2.02375e-05 Jy ! Component: 150 - total flux cleaned = -4.4381e-05 Jy ! Component: 200 - total flux cleaned = -0.000106593 Jy ! Component: 250 - total flux cleaned = -0.000206399 Jy ! Component: 300 - total flux cleaned = -0.000244514 Jy ! Component: 350 - total flux cleaned = -0.000301058 Jy ! Component: 400 - total flux cleaned = -0.000411728 Jy ! Component: 450 - total flux cleaned = -0.00057369 Jy ! Component: 500 - total flux cleaned = -0.00064377 Jy ! Component: 550 - total flux cleaned = -0.000781676 Jy ! Component: 600 - total flux cleaned = -0.000883307 Jy ! Component: 650 - total flux cleaned = -0.000999063 Jy ! Component: 700 - total flux cleaned = -0.00111256 Jy ! Component: 750 - total flux cleaned = -0.0011759 Jy ! Component: 800 - total flux cleaned = -0.0012229 Jy ! Component: 850 - total flux cleaned = -0.00129965 Jy ! Component: 900 - total flux cleaned = -0.00134471 Jy ! Component: 950 - total flux cleaned = -0.00137463 Jy ! Component: 1000 - total flux cleaned = -0.00149047 Jy ! Component: 1050 - total flux cleaned = -0.00151894 Jy ! Component: 1100 - total flux cleaned = -0.00163076 Jy ! Component: 1150 - total flux cleaned = -0.00167192 Jy ! Component: 1200 - total flux cleaned = -0.00173964 Jy ! Component: 1250 - total flux cleaned = -0.00179297 Jy ! Component: 1300 - total flux cleaned = -0.00184557 Jy ! Component: 1350 - total flux cleaned = -0.00189729 Jy ! Component: 1400 - total flux cleaned = -0.00193558 Jy ! Component: 1450 - total flux cleaned = -0.0019608 Jy ! Component: 1500 - total flux cleaned = -0.00203502 Jy ! Component: 1550 - total flux cleaned = -0.00208364 Jy ! Component: 1600 - total flux cleaned = -0.00210777 Jy ! Component: 1650 - total flux cleaned = -0.00217894 Jy ! Component: 1700 - total flux cleaned = -0.00223733 Jy ! Component: 1750 - total flux cleaned = -0.00226041 Jy ! Component: 1800 - total flux cleaned = -0.00231745 Jy ! Component: 1850 - total flux cleaned = -0.00236246 Jy ! Component: 1900 - total flux cleaned = -0.00239583 Jy ! Component: 1950 - total flux cleaned = -0.00242882 Jy ! Component: 2000 - total flux cleaned = -0.0024615 Jy ! Total flux subtracted in 2048 components = -0.00252574 Jy ! Clean residual min=-0.000599 max=0.000655 Jy/beam ! Clean residual mean=-0.000000 rms=0.000199 Jy/beam ! Combined flux in latest and established models = 0.621062 Jy keep ! Adding 138 model components to the UV plane model. ! The established model now contains 348 components and 0.621062 Jy ![Exited script file: muppet] wmap "J1511+0518_X_2015_03_17_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9539 x 2 at -0.01894 degrees (North through East) ! Clean map min=-0.0025949 max=0.35735 Jy/beam ! Writing clean map to FITS file: J1511+0518_X_2015_03_17_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.357348 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000198809 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.166903 0.166903 0.333807 0.667613 1.33523 2.67045 5.34091 10.6818 21.3636 42.7272 85.4545 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.357 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9539 x 2 at -0.01894 degrees (North through East) ! Clean map min=-0.0025949 max=0.35735 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1511+0518_X_2015_03_17_pus_uvs.log closed on Sat Dec 31 19:08:07 2016