! Started logfile: J1510+5702_X_2015_03_17_pus_uvs.log on Sat Dec 31 19:08:02 2016
obs J1510+5702_X_2015_03_17_pus_uva.fits
! Reading UV FITS file: J1510+5702_X_2015_03_17_pus_uva.fits
! AN table 1: 42 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.80582 visibilities/baseline/integration-bin.
! Found source: J1510+5702
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.44388e+09      3.2e+07          1      3.2e+07
!  02        2  8.47588e+09      3.2e+07          1      3.2e+07
!  03        3  8.50788e+09      3.2e+07          1      3.2e+07
!  04        4  8.53988e+09      3.2e+07          1      3.2e+07
!  05        5  8.60388e+09      3.2e+07          1      3.2e+07
!  06        6  8.63588e+09      3.2e+07          1      3.2e+07
!  07        7  8.69988e+09      3.2e+07          1      3.2e+07
!  08        8  8.73188e+09      3.2e+07          1      3.2e+07
!  09        9  8.79588e+09      3.2e+07          1      3.2e+07
!  10       10  8.82788e+09      3.2e+07          1      3.2e+07
!  11       11  8.85988e+09      3.2e+07          1      3.2e+07
!  12       12  8.89188e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 338 lines of history.
! 
! Reading 18276 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =",field_size
! field_size = 512 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@muppet J1510+5702_X_2015_03_17_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.831955Jy  sigma=0.009706
! Fit after  self-cal, rms=0.829006Jy  sigma=0.009674
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7985 mas, bmaj=1.096 mas, bpa=-50.26 degrees
! Estimated noise=836.208 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.132938 Jy
! Component: 100  -  total flux cleaned = 0.163233 Jy
! Total flux subtracted in 100 components = 0.163233 Jy
! Clean residual min=-0.006087 max=0.013484 Jy/beam
! Clean residual mean=0.000037 rms=0.001900 Jy/beam
! Combined flux in latest and established models = 0.163233 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.163233 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079610Jy  sigma=0.000864
! Fit after  self-cal, rms=0.079609Jy  sigma=0.000864
! Inverting map 
! Added new window around map position (-0.6, -1.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0133502 Jy
! Component: 100  -  total flux cleaned = 0.0215977 Jy
! Total flux subtracted in 100 components = 0.0215977 Jy
! Clean residual min=-0.005722 max=0.007322 Jy/beam
! Clean residual mean=0.000032 rms=0.001512 Jy/beam
! Combined flux in latest and established models = 0.184831 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 22 components and 0.184831 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076696Jy  sigma=0.000830
! Fit after  self-cal, rms=0.076592Jy  sigma=0.000828
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.024 mas, bmaj=1.322 mas, bpa=-52.45 degrees
! Estimated noise=455.157 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00768504 Jy
! Component: 100  -  total flux cleaned = 0.0116839 Jy
! Component: 150  -  total flux cleaned = 0.0142015 Jy
! Component: 200  -  total flux cleaned = 0.0158207 Jy
! Total flux subtracted in 200 components = 0.0158207 Jy
! Clean residual min=-0.006239 max=0.005051 Jy/beam
! Clean residual mean=0.000064 rms=0.001447 Jy/beam
! Combined flux in latest and established models = 0.200651 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 38 components and 0.200651 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075737Jy  sigma=0.000820
! Fit after  self-cal, rms=0.075683Jy  sigma=0.000819
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.11     HN        1.05     KP        0.92     
!   LA        0.99     MK        0.97     NL        0.99     OV        0.98     
!   PT        1.06     SC        1.09     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        1.12     HN        1.05     KP        0.88     
!   LA        1.04     MK        0.92     NL        0.99     OV        0.98     
!   PT        1.00     SC        1.14     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.13     HN        1.05     KP        0.85     
!   LA        1.06     MK        0.96     NL        0.99     OV        0.97     
!   PT        0.99     SC        1.09     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.11     HN        1.02     KP        0.78     
!   LA        1.08     MK        0.99     NL        1.00     OV        1.00     
!   PT        0.99     SC        1.11     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.09     HN        1.03     KP        0.76     
!   LA        1.06     MK        0.98     NL        1.03     OV        0.96     
!   PT        0.97     SC        1.11     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.09     HN        1.04     KP        0.74     
!   LA        1.08     MK        0.96     NL        1.00     OV        0.99     
!   PT        0.98     SC        1.14     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.14     HN        1.08     KP        0.74     
!   LA        1.06     MK        0.95     NL        1.00     OV        1.05     
!   PT        0.96     SC        1.11     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.19     HN        1.08     KP        0.74     
!   LA        1.06     MK        0.97     NL        1.03     OV        1.07     
!   PT        0.95     SC        1.09     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.14     HN        1.07     KP        0.76     
!   LA        1.05     MK        0.96     NL        1.01     OV        1.04     
!   PT        0.98     SC        1.08     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.16     HN        1.07     KP        0.81     
!   LA        1.06     MK        0.97     NL        1.01     OV        1.04     
!   PT        1.00     SC        1.04     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.12     HN        1.10     KP        0.82     
!   LA        1.05     MK        0.99     NL        0.99     OV        1.05     
!   PT        1.00     SC        1.12     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.19     HN        1.09     KP        0.85     
!   LA        1.07     MK        1.01     NL        0.98     OV        1.00     
!   PT        1.00     SC        1.12     
! 
! 
! Fit before self-cal, rms=0.075683Jy  sigma=0.000819
! Fit after  self-cal, rms=0.072734Jy  sigma=0.000775
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.026 mas, bmaj=1.343 mas, bpa=-52.59 degrees
! Estimated noise=454.138 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000118311 Jy
! Component: 100  -  total flux cleaned = -8.48789e-05 Jy
! Component: 150  -  total flux cleaned = -0.000240969 Jy
! Component: 200  -  total flux cleaned = -0.000273623 Jy
! Total flux subtracted in 200 components = -0.000273623 Jy
! Clean residual min=-0.001716 max=0.001617 Jy/beam
! Clean residual mean=-0.000014 rms=0.000433 Jy/beam
! Combined flux in latest and established models = 0.200378 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 46 components and 0.200378 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072668Jy  sigma=0.000774
! Fit after  self-cal, rms=0.072716Jy  sigma=0.000774
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072716Jy  sigma=0.000774
! Fit after  self-cal, rms=0.073305Jy  sigma=0.000772
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.029 mas, bmaj=1.335 mas, bpa=-52.27 degrees
! Estimated noise=454.279 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.07913e-05 Jy
! Component: 100  -  total flux cleaned = -0.000106559 Jy
! Component: 150  -  total flux cleaned = -0.000161279 Jy
! Component: 200  -  total flux cleaned = -0.000139188 Jy
! Total flux subtracted in 200 components = -0.000139188 Jy
! Clean residual min=-0.001457 max=0.001578 Jy/beam
! Clean residual mean=-0.000014 rms=0.000369 Jy/beam
! Combined flux in latest and established models = 0.200239 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 51 components and 0.200239 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073274Jy  sigma=0.000772
! Fit after  self-cal, rms=0.073281Jy  sigma=0.000772
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.39124e-05 Jy
! Component: 100  -  total flux cleaned = 9.32265e-05 Jy
! Component: 150  -  total flux cleaned = 0.000142137 Jy
! Component: 200  -  total flux cleaned = 0.000170717 Jy
! Total flux subtracted in 200 components = 0.000170717 Jy
! Clean residual min=-0.001444 max=0.001582 Jy/beam
! Clean residual mean=-0.000014 rms=0.000364 Jy/beam
! Combined flux in latest and established models = 0.200409 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 55 components and 0.200409 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073272Jy  sigma=0.000772
! Fit after  self-cal, rms=0.073270Jy  sigma=0.000772
! Inverting map 
! Added new window around map position (-7.6, 2.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000871281 Jy
! Component: 100  -  total flux cleaned = 0.000907069 Jy
! Component: 150  -  total flux cleaned = 0.00099272 Jy
! Component: 200  -  total flux cleaned = 0.00113328 Jy
! Total flux subtracted in 200 components = 0.00113328 Jy
! Clean residual min=-0.001354 max=0.001284 Jy/beam
! Clean residual mean=-0.000010 rms=0.000345 Jy/beam
! Combined flux in latest and established models = 0.201543 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 69 components and 0.201543 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073230Jy  sigma=0.000771
! Fit after  self-cal, rms=0.073228Jy  sigma=0.000771
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073228Jy  sigma=0.000771
! Fit after  self-cal, rms=0.073433Jy  sigma=0.000770
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.032 mas, bmaj=1.334 mas, bpa=-52.15 degrees
! Estimated noise=454.159 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.97694e-05 Jy
! Component: 100  -  total flux cleaned = 3.41593e-05 Jy
! Component: 150  -  total flux cleaned = 5.3482e-05 Jy
! Component: 200  -  total flux cleaned = 7.14021e-05 Jy
! Total flux subtracted in 200 components = 7.14021e-05 Jy
! Clean residual min=-0.001294 max=0.001387 Jy/beam
! Clean residual mean=-0.000006 rms=0.000322 Jy/beam
! Combined flux in latest and established models = 0.201614 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 74 components and 0.201614 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073419Jy  sigma=0.000770
! Fit after  self-cal, rms=0.073426Jy  sigma=0.000770
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.2, 23.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000538561 Jy
! Component: 100  -  total flux cleaned = 0.000505335 Jy
! Component: 150  -  total flux cleaned = 0.00055138 Jy
! Component: 200  -  total flux cleaned = 0.000721246 Jy
! Total flux subtracted in 200 components = 0.000721246 Jy
! Clean residual min=-0.001231 max=0.001257 Jy/beam
! Clean residual mean=-0.000008 rms=0.000307 Jy/beam
! Combined flux in latest and established models = 0.202335 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 86 components and 0.202335 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073394Jy  sigma=0.000769
! Fit after  self-cal, rms=0.073392Jy  sigma=0.000769
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073392Jy  sigma=0.000769
! Fit after  self-cal, rms=0.073459Jy  sigma=0.000769
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.304 mas, bmaj=2.724 mas, bpa=-83.2 degrees
! Estimated noise=555.079 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.41711e-05 Jy
! Component: 100  -  total flux cleaned = 0.000205231 Jy
! Component: 150  -  total flux cleaned = 0.000353451 Jy
! Component: 200  -  total flux cleaned = 0.000504047 Jy
! Total flux subtracted in 200 components = 0.000504047 Jy
! Clean residual min=-0.001250 max=0.001509 Jy/beam
! Clean residual mean=-0.000010 rms=0.000365 Jy/beam
! Combined flux in latest and established models = 0.202839 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 98 components and 0.202839 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073454Jy  sigma=0.000769
! Fit after  self-cal, rms=0.073454Jy  sigma=0.000769
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.56198e-05 Jy
! Component: 100  -  total flux cleaned = 0.000127586 Jy
! Component: 150  -  total flux cleaned = 0.000158654 Jy
! Component: 200  -  total flux cleaned = 0.000178284 Jy
! Total flux subtracted in 200 components = 0.000178284 Jy
! Clean residual min=-0.001226 max=0.001497 Jy/beam
! Clean residual mean=-0.000009 rms=0.000363 Jy/beam
! Combined flux in latest and established models = 0.203017 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 104 components and 0.203018 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073453Jy  sigma=0.000769
! Fit after  self-cal, rms=0.073453Jy  sigma=0.000769
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.033 mas, bmaj=1.334 mas, bpa=-52.14 degrees
! Estimated noise=453.917 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.033 x 1.334 at -52.14 degrees (North through East)
! Clean map  min=-0.0011214  max=0.16848 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8061 mas, bmaj=1.11 mas, bpa=-50.3 degrees
! Estimated noise=837.832 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.132998 Jy
! Component: 100  -  total flux cleaned = 0.163851 Jy
! Component: 150  -  total flux cleaned = 0.1766 Jy
! Component: 200  -  total flux cleaned = 0.183761 Jy
! Total flux subtracted in 200 components = 0.183761 Jy
! Clean residual min=-0.002910 max=0.004029 Jy/beam
! Clean residual mean=0.000004 rms=0.000782 Jy/beam
! Combined flux in latest and established models = 0.183761 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 0.183761 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.033 mas, bmaj=1.334 mas, bpa=-52.14 degrees
! Estimated noise=453.917 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0063205 Jy
! Component: 100  -  total flux cleaned = 0.00987963 Jy
! Component: 150  -  total flux cleaned = 0.0122207 Jy
! Component: 200  -  total flux cleaned = 0.0140009 Jy
! Total flux subtracted in 200 components = 0.0140009 Jy
! Clean residual min=-0.001413 max=0.001821 Jy/beam
! Clean residual mean=-0.000014 rms=0.000361 Jy/beam
! Combined flux in latest and established models = 0.197761 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 42 components and 0.197761 Jy
! Inverting map 
! Added new window around map position (0, -2.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00171618 Jy
! Component: 100  -  total flux cleaned = 0.00250598 Jy
! Component: 150  -  total flux cleaned = 0.00296627 Jy
! Component: 200  -  total flux cleaned = 0.00330228 Jy
! Total flux subtracted in 200 components = 0.00330228 Jy
! Clean residual min=-0.001264 max=0.001209 Jy/beam
! Clean residual mean=-0.000008 rms=0.000313 Jy/beam
! Combined flux in latest and established models = 0.201064 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 63 components and 0.201064 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.304 mas, bmaj=2.724 mas, bpa=-83.2 degrees
! Estimated noise=555.079 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000946265 Jy
! Component: 100  -  total flux cleaned = 0.00131386 Jy
! Component: 150  -  total flux cleaned = 0.00152836 Jy
! Component: 200  -  total flux cleaned = 0.00175013 Jy
! Total flux subtracted in 200 components = 0.00175013 Jy
! Clean residual min=-0.001275 max=0.001432 Jy/beam
! Clean residual mean=-0.000009 rms=0.000359 Jy/beam
! Combined flux in latest and established models = 0.202814 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000195566 Jy
! Component: 100  -  total flux cleaned = 0.000328171 Jy
! Component: 150  -  total flux cleaned = 0.000462877 Jy
! Component: 200  -  total flux cleaned = 0.000574116 Jy
! Total flux subtracted in 200 components = 0.000574116 Jy
! Clean residual min=-0.001237 max=0.001399 Jy/beam
! Clean residual mean=-0.000008 rms=0.000351 Jy/beam
! Combined flux in latest and established models = 0.203388 Jy
! Adding 52 model components to the UV plane model.
! The established model now contains 107 components and 0.203388 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.033 mas, bmaj=1.334 mas, bpa=-52.14 degrees
! Estimated noise=453.917 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.11518e-05 Jy
! Component: 100  -  total flux cleaned = -5.57628e-05 Jy
! Component: 150  -  total flux cleaned = 4.08328e-05 Jy
! Component: 200  -  total flux cleaned = 8.40585e-05 Jy
! Total flux subtracted in 200 components = 8.40585e-05 Jy
! Clean residual min=-0.001232 max=0.001328 Jy/beam
! Clean residual mean=-0.000004 rms=0.000292 Jy/beam
! Combined flux in latest and established models = 0.203472 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 120 components and 0.203472 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073440Jy  sigma=0.000769
! Fit after  self-cal, rms=0.073434Jy  sigma=0.000769
wmodel J1510+5702_X_2015_03_17_pus_map.mod
! Writing 120 model components to file: J1510+5702_X_2015_03_17_pus_map.mod
wobs J1510+5702_X_2015_03_17_pus_uvs.fits
! Writing UV FITS file: J1510+5702_X_2015_03_17_pus_uvs.fits
wwins J1510+5702_X_2015_03_17_pus_map.win
! wwins: Wrote 5 windows to J1510+5702_X_2015_03_17_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000174011 Jy
! Component: 100  -  total flux cleaned = -9.2367e-05 Jy
! Component: 150  -  total flux cleaned = -0.000362111 Jy
! Component: 200  -  total flux cleaned = -0.000637198 Jy
! Component: 250  -  total flux cleaned = -0.000866867 Jy
! Component: 300  -  total flux cleaned = -0.00108926 Jy
! Component: 350  -  total flux cleaned = -0.00127207 Jy
! Component: 400  -  total flux cleaned = -0.00140128 Jy
! Component: 450  -  total flux cleaned = -0.00152691 Jy
! Component: 500  -  total flux cleaned = -0.00158845 Jy
! Component: 550  -  total flux cleaned = -0.00166384 Jy
! Component: 600  -  total flux cleaned = -0.00173755 Jy
! Component: 650  -  total flux cleaned = -0.00178099 Jy
! Component: 700  -  total flux cleaned = -0.0018096 Jy
! Component: 750  -  total flux cleaned = -0.00186602 Jy
! Component: 800  -  total flux cleaned = -0.0019488 Jy
! Component: 850  -  total flux cleaned = -0.00198973 Jy
! Component: 900  -  total flux cleaned = -0.00207024 Jy
! Component: 950  -  total flux cleaned = -0.0021098 Jy
! Component: 1000  -  total flux cleaned = -0.00217488 Jy
! Component: 1050  -  total flux cleaned = -0.00222622 Jy
! Component: 1100  -  total flux cleaned = -0.00223898 Jy
! Component: 1150  -  total flux cleaned = -0.00230163 Jy
! Component: 1200  -  total flux cleaned = -0.00231409 Jy
! Component: 1250  -  total flux cleaned = -0.00237505 Jy
! Component: 1300  -  total flux cleaned = -0.00241108 Jy
! Component: 1350  -  total flux cleaned = -0.00242287 Jy
! Component: 1400  -  total flux cleaned = -0.00242289 Jy
! Component: 1450  -  total flux cleaned = -0.00246961 Jy
! Component: 1500  -  total flux cleaned = -0.00249262 Jy
! Component: 1550  -  total flux cleaned = -0.00251523 Jy
! Component: 1600  -  total flux cleaned = -0.00248135 Jy
! Component: 1650  -  total flux cleaned = -0.00252583 Jy
! Component: 1700  -  total flux cleaned = -0.00250362 Jy
! Component: 1750  -  total flux cleaned = -0.00249272 Jy
! Component: 1800  -  total flux cleaned = -0.00251454 Jy
! Component: 1850  -  total flux cleaned = -0.0024931 Jy
! Component: 1900  -  total flux cleaned = -0.00245068 Jy
! Component: 1950  -  total flux cleaned = -0.00244023 Jy
! Component: 2000  -  total flux cleaned = -0.00241941 Jy
! Total flux subtracted in 2048 components = -0.00235738 Jy
! Clean residual min=-0.000626 max=0.000611 Jy/beam
! Clean residual mean=0.000004 rms=0.000189 Jy/beam
! Combined flux in latest and established models = 0.201115 Jy
keep
! Adding 146 model components to the UV plane model.
! The established model now contains 266 components and 0.201115 Jy
![Exited script file: muppet]
wmap "J1510+5702_X_2015_03_17_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.033 x 1.334 at -52.14 degrees (North through East)
! Clean map  min=-0.00089379  max=0.16817 Jy/beam
! Writing clean map to FITS file: J1510+5702_X_2015_03_17_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.168169 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00018803 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.33543 0.33543 0.67086 1.34172 2.68344 5.36688 10.7338 21.4675 42.935 85.8701
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0005 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.168 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.033 x 1.334 at -52.14 degrees (North through East)
! Clean map  min=-0.00089379  max=0.16817 Jy/beam
! Error occured in command: mapplot
! 
! <Aborted by EOF>
! <Aborted by EOF>
! <Aborted by EOF>
! <Aborted by EOF>
! 4 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 5 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 6 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 7 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 8 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 9 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 10 consecutive EOF's on stdin - 10 will exit program
! Log file J1510+5702_X_2015_03_17_pus_uvs.log closed on Sat Dec 31 19:08:04 2016