! Started logfile: J1510+5702_S_2015_01_22_pus_uvs.log on Tue Jan 3 22:57:14 2017 obs J1510+5702_S_2015_01_22_pus_uva.fits ! Reading UV FITS file: J1510+5702_S_2015_01_22_pus_uva.fits ! AN table 1: 15 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.8 visibilities/baseline/integration-bin. ! Found source: J1510+5702 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 281 lines of history. ! ! Reading 2160 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1510+5702_S_2015_01_22_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.859920Jy sigma=0.011104 ! Fit after self-cal, rms=0.857597Jy sigma=0.011074 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.443 mas, bmaj=9.394 mas, bpa=18.88 degrees ! Estimated noise=1489.75 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.109392 Jy ! Component: 100 - total flux cleaned = 0.133732 Jy ! Total flux subtracted in 100 components = 0.133732 Jy ! Clean residual min=-0.005198 max=0.008259 Jy/beam ! Clean residual mean=-0.000006 rms=0.001569 Jy/beam ! Combined flux in latest and established models = 0.133732 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.133732 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068791Jy sigma=0.000817 ! Fit after self-cal, rms=0.068792Jy sigma=0.000817 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.88 mas, bmaj=9.406 mas, bpa=18.09 degrees ! Estimated noise=1197.99 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0116276 Jy ! Component: 100 - total flux cleaned = 0.0171123 Jy ! Component: 150 - total flux cleaned = 0.0208501 Jy ! Component: 200 - total flux cleaned = 0.023619 Jy ! Total flux subtracted in 200 components = 0.023619 Jy ! Clean residual min=-0.005078 max=0.004729 Jy/beam ! Clean residual mean=0.000003 rms=0.001208 Jy/beam ! Combined flux in latest and established models = 0.157351 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 39 components and 0.157351 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066563Jy sigma=0.000794 ! Fit after self-cal, rms=0.066572Jy sigma=0.000794 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00* HN 0.98 KP 1.08 ! LA 1.00 MK 1.00 NL 0.98 OV 0.94 ! PT 1.03 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00* HN 1.01 KP 0.99 ! LA 1.07 MK 1.02 NL 1.01 OV 1.04 ! PT 1.00 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.00* HN 1.02 KP 0.82 ! LA 0.81 MK 1.02 NL 1.15 OV 0.99 ! PT 1.00 SC 1.04 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.00* HN 1.03 KP 0.81 ! LA 0.89 MK 1.06 NL 0.98 OV 0.98 ! PT 1.04 SC 1.03 ! ! ! Fit before self-cal, rms=0.066572Jy sigma=0.000794 ! Fit after self-cal, rms=0.062670Jy sigma=0.000770 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.912 mas, bmaj=9.409 mas, bpa=17.99 degrees ! Estimated noise=1188.83 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.42014e-05 Jy ! Component: 100 - total flux cleaned = 0.000301031 Jy ! Component: 150 - total flux cleaned = 0.000385308 Jy ! Component: 200 - total flux cleaned = 0.000386083 Jy ! Total flux subtracted in 200 components = 0.000386083 Jy ! Clean residual min=-0.003669 max=0.003168 Jy/beam ! Clean residual mean=0.000002 rms=0.000847 Jy/beam ! Combined flux in latest and established models = 0.157737 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 50 components and 0.157737 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062632Jy sigma=0.000770 ! Fit after self-cal, rms=0.062617Jy sigma=0.000769 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062617Jy sigma=0.000769 ! Fit after self-cal, rms=0.062582Jy sigma=0.000769 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.915 mas, bmaj=9.399 mas, bpa=17.99 degrees ! Estimated noise=1187.67 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000227671 Jy ! Component: 100 - total flux cleaned = -0.000202765 Jy ! Component: 150 - total flux cleaned = -0.00025693 Jy ! Component: 200 - total flux cleaned = -0.000241564 Jy ! Total flux subtracted in 200 components = -0.000241564 Jy ! Clean residual min=-0.003635 max=0.003147 Jy/beam ! Clean residual mean=0.000002 rms=0.000835 Jy/beam ! Combined flux in latest and established models = 0.157495 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 55 components and 0.157495 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062571Jy sigma=0.000769 ! Fit after self-cal, rms=0.062572Jy sigma=0.000769 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.84803e-06 Jy ! Component: 100 - total flux cleaned = 1.93224e-05 Jy ! Component: 150 - total flux cleaned = 5.42881e-05 Jy ! Component: 200 - total flux cleaned = 8.76363e-05 Jy ! Total flux subtracted in 200 components = 8.76363e-05 Jy ! Clean residual min=-0.003627 max=0.003124 Jy/beam ! Clean residual mean=0.000002 rms=0.000832 Jy/beam ! Combined flux in latest and established models = 0.157583 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 64 components and 0.157583 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062568Jy sigma=0.000769 ! Fit after self-cal, rms=0.062567Jy sigma=0.000769 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062567Jy sigma=0.000769 ! Fit after self-cal, rms=0.062556Jy sigma=0.000769 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.917 mas, bmaj=9.394 mas, bpa=17.98 degrees ! Estimated noise=1187.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000331246 Jy ! Component: 100 - total flux cleaned = -0.000398533 Jy ! Component: 150 - total flux cleaned = -0.000387104 Jy ! Component: 200 - total flux cleaned = -0.00036632 Jy ! Total flux subtracted in 200 components = -0.00036632 Jy ! Clean residual min=-0.003638 max=0.003142 Jy/beam ! Clean residual mean=0.000002 rms=0.000829 Jy/beam ! Combined flux in latest and established models = 0.157217 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 67 components and 0.157217 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062552Jy sigma=0.000769 ! Fit after self-cal, rms=0.062553Jy sigma=0.000769 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.11507e-06 Jy ! Component: 100 - total flux cleaned = 1.86749e-05 Jy ! Component: 150 - total flux cleaned = 4.54258e-05 Jy ! Component: 200 - total flux cleaned = 6.27403e-05 Jy ! Total flux subtracted in 200 components = 6.27403e-05 Jy ! Clean residual min=-0.003635 max=0.003135 Jy/beam ! Clean residual mean=0.000002 rms=0.000827 Jy/beam ! Combined flux in latest and established models = 0.157279 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 69 components and 0.157279 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062550Jy sigma=0.000769 ! Fit after self-cal, rms=0.062550Jy sigma=0.000769 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062550Jy sigma=0.000769 ! Fit after self-cal, rms=0.062541Jy sigma=0.000769 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.436 mas, bmaj=10.2 mas, bpa=14.49 degrees ! Estimated noise=1548.73 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000173742 Jy ! Component: 100 - total flux cleaned = 0.000190978 Jy ! Component: 150 - total flux cleaned = 0.00020338 Jy ! Component: 200 - total flux cleaned = 0.000214086 Jy ! Total flux subtracted in 200 components = 0.000214086 Jy ! Clean residual min=-0.003660 max=0.003792 Jy/beam ! Clean residual mean=0.000007 rms=0.001046 Jy/beam ! Combined flux in latest and established models = 0.157493 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 79 components and 0.157493 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062547Jy sigma=0.000769 ! Fit after self-cal, rms=0.062547Jy sigma=0.000769 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.92861e-05 Jy ! Component: 100 - total flux cleaned = 5.95749e-05 Jy ! Component: 150 - total flux cleaned = 5.01115e-05 Jy ! Component: 200 - total flux cleaned = 3.26014e-05 Jy ! Total flux subtracted in 200 components = 3.26014e-05 Jy ! Clean residual min=-0.003636 max=0.003775 Jy/beam ! Clean residual mean=0.000007 rms=0.001041 Jy/beam ! Combined flux in latest and established models = 0.157526 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 85 components and 0.157526 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062552Jy sigma=0.000769 ! Fit after self-cal, rms=0.062552Jy sigma=0.000769 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.919 mas, bmaj=9.393 mas, bpa=17.96 degrees ! Estimated noise=1186.74 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.919 x 9.393 at 17.96 degrees (North through East) ! Clean map min=-0.0034605 max=0.14277 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.47 mas, bmaj=9.368 mas, bpa=18.82 degrees ! Estimated noise=1488.86 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.10926 Jy ! Component: 100 - total flux cleaned = 0.13337 Jy ! Component: 150 - total flux cleaned = 0.141221 Jy ! Component: 200 - total flux cleaned = 0.145273 Jy ! Total flux subtracted in 200 components = 0.145273 Jy ! Clean residual min=-0.004901 max=0.003949 Jy/beam ! Clean residual mean=-0.000003 rms=0.001096 Jy/beam ! Combined flux in latest and established models = 0.145273 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.145273 Jy ! Inverting map and beam ! Estimated beam: bmin=2.919 mas, bmaj=9.393 mas, bpa=17.96 degrees ! Estimated noise=1186.74 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00398288 Jy ! Component: 100 - total flux cleaned = 0.00652751 Jy ! Component: 150 - total flux cleaned = 0.00809061 Jy ! Component: 200 - total flux cleaned = 0.00884141 Jy ! Total flux subtracted in 200 components = 0.00884141 Jy ! Clean residual min=-0.003833 max=0.003092 Jy/beam ! Clean residual mean=0.000000 rms=0.000861 Jy/beam ! Combined flux in latest and established models = 0.154114 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 51 components and 0.154114 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.436 mas, bmaj=10.2 mas, bpa=14.49 degrees ! Estimated noise=1548.73 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00199716 Jy ! Component: 100 - total flux cleaned = 0.00287721 Jy ! Component: 150 - total flux cleaned = 0.00303585 Jy ! Component: 200 - total flux cleaned = 0.0030722 Jy ! Total flux subtracted in 200 components = 0.0030722 Jy ! Clean residual min=-0.003716 max=0.003678 Jy/beam ! Clean residual mean=0.000006 rms=0.001038 Jy/beam ! Combined flux in latest and established models = 0.157186 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.16319e-05 Jy ! Component: 100 - total flux cleaned = 5.90537e-05 Jy ! Component: 150 - total flux cleaned = 8.36214e-05 Jy ! Component: 200 - total flux cleaned = 0.000105539 Jy ! Total flux subtracted in 200 components = 0.000105539 Jy ! Clean residual min=-0.003648 max=0.003728 Jy/beam ! Clean residual mean=0.000006 rms=0.001034 Jy/beam ! Combined flux in latest and established models = 0.157292 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 76 components and 0.157292 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.919 mas, bmaj=9.393 mas, bpa=17.96 degrees ! Estimated noise=1186.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000508651 Jy ! Component: 100 - total flux cleaned = -0.000599388 Jy ! Component: 150 - total flux cleaned = -0.000622986 Jy ! Component: 200 - total flux cleaned = -0.000602239 Jy ! Total flux subtracted in 200 components = -0.000602239 Jy ! Clean residual min=-0.003586 max=0.003169 Jy/beam ! Clean residual mean=0.000001 rms=0.000825 Jy/beam ! Combined flux in latest and established models = 0.15669 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 82 components and 0.15669 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062551Jy sigma=0.000769 ! Fit after self-cal, rms=0.062549Jy sigma=0.000769 wmodel J1510+5702_S_2015_01_22_pus_map.mod ! Writing 82 model components to file: J1510+5702_S_2015_01_22_pus_map.mod wobs J1510+5702_S_2015_01_22_pus_uvs.fits ! Writing UV FITS file: J1510+5702_S_2015_01_22_pus_uvs.fits wwins J1510+5702_S_2015_01_22_pus_map.win ! wwins: Wrote 1 windows to J1510+5702_S_2015_01_22_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000412022 Jy ! Component: 100 - total flux cleaned = -0.00078916 Jy ! Component: 150 - total flux cleaned = -0.00134173 Jy ! Component: 200 - total flux cleaned = -0.00167476 Jy ! Component: 250 - total flux cleaned = -0.0021267 Jy ! Component: 300 - total flux cleaned = -0.00255809 Jy ! Component: 350 - total flux cleaned = -0.00288961 Jy ! Component: 400 - total flux cleaned = -0.00332864 Jy ! Component: 450 - total flux cleaned = -0.00359972 Jy ! Component: 500 - total flux cleaned = -0.00382653 Jy ! Component: 550 - total flux cleaned = -0.00411922 Jy ! Component: 600 - total flux cleaned = -0.00436836 Jy ! Component: 650 - total flux cleaned = -0.00461141 Jy ! Component: 700 - total flux cleaned = -0.0048475 Jy ! Component: 750 - total flux cleaned = -0.00501316 Jy ! Component: 800 - total flux cleaned = -0.00530467 Jy ! Component: 850 - total flux cleaned = -0.00555746 Jy ! Component: 900 - total flux cleaned = -0.00580454 Jy ! Component: 950 - total flux cleaned = -0.00604653 Jy ! Component: 1000 - total flux cleaned = -0.00628255 Jy ! Component: 1050 - total flux cleaned = -0.00648518 Jy ! Component: 1100 - total flux cleaned = -0.00674071 Jy ! Component: 1150 - total flux cleaned = -0.00690756 Jy ! Component: 1200 - total flux cleaned = -0.00707162 Jy ! Component: 1250 - total flux cleaned = -0.00728662 Jy ! Component: 1300 - total flux cleaned = -0.00749682 Jy ! Component: 1350 - total flux cleaned = -0.00762638 Jy ! Component: 1400 - total flux cleaned = -0.0078299 Jy ! Component: 1450 - total flux cleaned = -0.00792986 Jy ! Component: 1500 - total flux cleaned = -0.00802844 Jy ! Component: 1550 - total flux cleaned = -0.00812539 Jy ! Component: 1600 - total flux cleaned = -0.00817253 Jy ! Component: 1650 - total flux cleaned = -0.00821934 Jy ! Component: 1700 - total flux cleaned = -0.00826523 Jy ! Component: 1750 - total flux cleaned = -0.00833289 Jy ! Component: 1800 - total flux cleaned = -0.0084447 Jy ! Component: 1850 - total flux cleaned = -0.00848819 Jy ! Component: 1900 - total flux cleaned = -0.00848837 Jy ! Component: 1950 - total flux cleaned = -0.00853122 Jy ! Component: 2000 - total flux cleaned = -0.0084679 Jy ! Component: 2050 - total flux cleaned = -0.00848879 Jy ! Component: 2100 - total flux cleaned = -0.00848886 Jy ! Component: 2150 - total flux cleaned = -0.00848865 Jy ! Component: 2200 - total flux cleaned = -0.00848892 Jy ! Component: 2250 - total flux cleaned = -0.00850887 Jy ! Component: 2300 - total flux cleaned = -0.00852839 Jy ! Component: 2350 - total flux cleaned = -0.00854753 Jy ! Component: 2400 - total flux cleaned = -0.0085663 Jy ! Component: 2450 - total flux cleaned = -0.00852852 Jy ! Component: 2500 - total flux cleaned = -0.00851016 Jy ! Component: 2550 - total flux cleaned = -0.00854694 Jy ! Component: 2600 - total flux cleaned = -0.00851035 Jy ! Component: 2650 - total flux cleaned = -0.00840222 Jy ! Component: 2700 - total flux cleaned = -0.00842007 Jy ! Component: 2750 - total flux cleaned = -0.00841985 Jy ! Component: 2800 - total flux cleaned = -0.00831525 Jy ! Component: 2850 - total flux cleaned = -0.00826352 Jy ! Component: 2900 - total flux cleaned = -0.00828067 Jy ! Component: 2950 - total flux cleaned = -0.00824665 Jy ! Component: 3000 - total flux cleaned = -0.00812974 Jy ! Component: 3050 - total flux cleaned = -0.00811331 Jy ! Component: 3100 - total flux cleaned = -0.00806419 Jy ! Component: 3150 - total flux cleaned = -0.00806425 Jy ! Component: 3200 - total flux cleaned = -0.00799994 Jy ! Component: 3250 - total flux cleaned = -0.00804769 Jy ! Component: 3300 - total flux cleaned = -0.00803168 Jy ! Component: 3350 - total flux cleaned = -0.00793793 Jy ! Component: 3400 - total flux cleaned = -0.00786013 Jy ! Component: 3450 - total flux cleaned = -0.00782914 Jy ! Component: 3500 - total flux cleaned = -0.0077069 Jy ! Component: 3550 - total flux cleaned = -0.00767656 Jy ! Component: 3600 - total flux cleaned = -0.00766137 Jy ! Component: 3650 - total flux cleaned = -0.00755688 Jy ! Component: 3700 - total flux cleaned = -0.00749754 Jy ! Component: 3750 - total flux cleaned = -0.00745334 Jy ! Component: 3800 - total flux cleaned = -0.00738018 Jy ! Component: 3850 - total flux cleaned = -0.00735122 Jy ! Component: 3900 - total flux cleaned = -0.00725023 Jy ! Component: 3950 - total flux cleaned = -0.00720729 Jy ! Component: 4000 - total flux cleaned = -0.00710755 Jy ! Component: 4050 - total flux cleaned = -0.00703696 Jy ! Total flux subtracted in 4096 components = -0.00700888 Jy ! Clean residual min=-0.000936 max=0.000868 Jy/beam ! Clean residual mean=0.000001 rms=0.000261 Jy/beam ! Combined flux in latest and established models = 0.149681 Jy keep ! Adding 283 model components to the UV plane model. ! The established model now contains 365 components and 0.149681 Jy ![Exited script file: muppet] wmap "J1510+5702_S_2015_01_22_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.919 x 9.393 at 17.96 degrees (North through East) ! Clean map min=-0.0020729 max=0.14252 Jy/beam ! Writing clean map to FITS file: J1510+5702_S_2015_01_22_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.142525 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00025942 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.546053 0.546053 1.09211 2.18421 4.36842 8.73684 17.4737 34.9474 69.8947 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.142 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.919 x 9.393 at 17.96 degrees (North through East) ! Clean map min=-0.0020729 max=0.14252 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1510+5702_S_2015_01_22_pus_uvs.log closed on Tue Jan 3 22:57:19 2017