! Started logfile: J1506-0919_S_2015_01_22_pus_uvs.log on Tue Jan 3 22:57:04 2017 obs J1506-0919_S_2015_01_22_pus_uva.fits ! Reading UV FITS file: J1506-0919_S_2015_01_22_pus_uva.fits ! AN table 1: 118 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.8 visibilities/baseline/integration-bin. ! Found source: J1506-0919 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 281 lines of history. ! ! Reading 16992 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1506-0919_S_2015_01_22_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 118 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 118 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 118 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 118 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.755515Jy sigma=0.008296 ! Fit after self-cal, rms=0.682082Jy sigma=0.007437 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.556 mas, bmaj=6.341 mas, bpa=-3.753 degrees ! Estimated noise=754.997 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.258146 Jy ! Component: 100 - total flux cleaned = 0.362322 Jy ! Total flux subtracted in 100 components = 0.362322 Jy ! Clean residual min=-0.032539 max=0.050644 Jy/beam ! Clean residual mean=0.000026 rms=0.010140 Jy/beam ! Combined flux in latest and established models = 0.362322 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.362322 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.198605Jy sigma=0.002133 ! Fit after self-cal, rms=0.198420Jy sigma=0.002132 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.052 mas, bmaj=7.268 mas, bpa=-3.082 degrees ! Estimated noise=508.844 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.066424 Jy ! Component: 100 - total flux cleaned = 0.0997554 Jy ! Component: 150 - total flux cleaned = 0.1168 Jy ! Component: 200 - total flux cleaned = 0.125655 Jy ! Total flux subtracted in 200 components = 0.125655 Jy ! Clean residual min=-0.032953 max=0.047565 Jy/beam ! Clean residual mean=-0.000111 rms=0.011289 Jy/beam ! Combined flux in latest and established models = 0.487977 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 27 components and 0.487977 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.176699Jy sigma=0.001920 ! Fit after self-cal, rms=0.176599Jy sigma=0.001919 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.85 FD 1.00* HN 0.93 KP 0.92 ! LA 1.73 MK 1.06 NL 1.87 OV 0.82 ! PT 0.90 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.00* HN 0.98 KP 0.86 ! LA 1.72 MK 1.06 NL 1.84 OV 0.85 ! PT 0.89 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.80 FD 1.00* HN 0.98 KP 0.76 ! LA 1.35 MK 1.08 NL 1.46 OV 0.80 ! PT 0.87 SC 1.08 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00* HN 0.94 KP 0.73 ! LA 1.40 MK 1.07 NL 0.96 OV 0.86 ! PT 0.92 SC 1.07 ! ! ! Fit before self-cal, rms=0.176599Jy sigma=0.001919 ! Fit after self-cal, rms=0.168950Jy sigma=0.001300 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.103 mas, bmaj=7.326 mas, bpa=-2.274 degrees ! Estimated noise=512.755 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00718407 Jy ! Component: 100 - total flux cleaned = 0.0108931 Jy ! Component: 150 - total flux cleaned = 0.011325 Jy ! Component: 200 - total flux cleaned = 0.0115167 Jy ! Total flux subtracted in 200 components = 0.0115167 Jy ! Clean residual min=-0.021736 max=0.031144 Jy/beam ! Clean residual mean=-0.000088 rms=0.006856 Jy/beam ! Combined flux in latest and established models = 0.499494 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 37 components and 0.499494 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168500Jy sigma=0.001297 ! Fit after self-cal, rms=0.169040Jy sigma=0.001294 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169040Jy sigma=0.001294 ! Fit after self-cal, rms=0.143554Jy sigma=0.000935 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.094 mas, bmaj=7.321 mas, bpa=-2.153 degrees ! Estimated noise=511.909 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00334139 Jy ! Component: 100 - total flux cleaned = 0.00417156 Jy ! Component: 150 - total flux cleaned = 0.00447501 Jy ! Component: 200 - total flux cleaned = 0.00484189 Jy ! Total flux subtracted in 200 components = 0.00484189 Jy ! Clean residual min=-0.009528 max=0.020463 Jy/beam ! Clean residual mean=-0.000021 rms=0.003179 Jy/beam ! Combined flux in latest and established models = 0.504336 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 42 components and 0.504336 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143388Jy sigma=0.000932 ! Fit after self-cal, rms=0.143629Jy sigma=0.000931 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (11.5, -0.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0183995 Jy ! Component: 100 - total flux cleaned = 0.0273814 Jy ! Component: 150 - total flux cleaned = 0.0310183 Jy ! Component: 200 - total flux cleaned = 0.0320423 Jy ! Total flux subtracted in 200 components = 0.0320423 Jy ! Clean residual min=-0.008203 max=0.015425 Jy/beam ! Clean residual mean=-0.000020 rms=0.002473 Jy/beam ! Combined flux in latest and established models = 0.536378 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 67 components and 0.536378 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141343Jy sigma=0.000885 ! Fit after self-cal, rms=0.141006Jy sigma=0.000879 ! Inverting map ! Added new window around map position (-29, -16). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0103368 Jy ! Component: 100 - total flux cleaned = 0.0135666 Jy ! Component: 150 - total flux cleaned = 0.015509 Jy ! Component: 200 - total flux cleaned = 0.016988 Jy ! Total flux subtracted in 200 components = 0.016988 Jy ! Clean residual min=-0.006933 max=0.011084 Jy/beam ! Clean residual mean=-0.000019 rms=0.001953 Jy/beam ! Combined flux in latest and established models = 0.553366 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 87 components and 0.553366 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139878Jy sigma=0.000850 ! Fit after self-cal, rms=0.139788Jy sigma=0.000849 ! Inverting map ! Added new window around map position (-51, -31.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0101444 Jy ! Component: 100 - total flux cleaned = 0.015437 Jy ! Component: 150 - total flux cleaned = 0.0190658 Jy ! Component: 200 - total flux cleaned = 0.0217088 Jy ! Total flux subtracted in 200 components = 0.0217088 Jy ! Clean residual min=-0.005610 max=0.006258 Jy/beam ! Clean residual mean=-0.000016 rms=0.001599 Jy/beam ! Combined flux in latest and established models = 0.575075 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 126 components and 0.575075 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138956Jy sigma=0.000832 ! Fit after self-cal, rms=0.138878Jy sigma=0.000831 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138878Jy sigma=0.000831 ! Fit after self-cal, rms=0.136683Jy sigma=0.000819 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.076 mas, bmaj=7.283 mas, bpa=-2.342 degrees ! Estimated noise=506.045 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00523409 Jy ! Component: 100 - total flux cleaned = 0.00905175 Jy ! Component: 150 - total flux cleaned = 0.0113708 Jy ! Component: 200 - total flux cleaned = 0.0125304 Jy ! Total flux subtracted in 200 components = 0.0125304 Jy ! Clean residual min=-0.003495 max=0.005227 Jy/beam ! Clean residual mean=-0.000006 rms=0.001052 Jy/beam ! Combined flux in latest and established models = 0.587605 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 151 components and 0.587605 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136398Jy sigma=0.000813 ! Fit after self-cal, rms=0.136323Jy sigma=0.000812 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (56, -50). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00464479 Jy ! Component: 100 - total flux cleaned = 0.00743403 Jy ! Component: 150 - total flux cleaned = 0.00945218 Jy ! Component: 200 - total flux cleaned = 0.0105788 Jy ! Total flux subtracted in 200 components = 0.0105788 Jy ! Clean residual min=-0.003153 max=0.003603 Jy/beam ! Clean residual mean=-0.000006 rms=0.000888 Jy/beam ! Combined flux in latest and established models = 0.598184 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 185 components and 0.598184 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136140Jy sigma=0.000808 ! Fit after self-cal, rms=0.136114Jy sigma=0.000808 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136114Jy sigma=0.000808 ! Fit after self-cal, rms=0.136178Jy sigma=0.000807 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.091 mas, bmaj=12.7 mas, bpa=1.454 degrees ! Estimated noise=662.965 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00459543 Jy ! Component: 100 - total flux cleaned = 0.00726618 Jy ! Component: 150 - total flux cleaned = 0.0092739 Jy ! Component: 200 - total flux cleaned = 0.0105547 Jy ! Total flux subtracted in 200 components = 0.0105547 Jy ! Clean residual min=-0.003115 max=0.003827 Jy/beam ! Clean residual mean=-0.000009 rms=0.001108 Jy/beam ! Combined flux in latest and established models = 0.608739 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 205 components and 0.608739 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136125Jy sigma=0.000806 ! Fit after self-cal, rms=0.136080Jy sigma=0.000805 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00219143 Jy ! Component: 100 - total flux cleaned = 0.0032195 Jy ! Component: 150 - total flux cleaned = 0.00370336 Jy ! Component: 200 - total flux cleaned = 0.00393883 Jy ! Total flux subtracted in 200 components = 0.00393883 Jy ! Clean residual min=-0.002708 max=0.003278 Jy/beam ! Clean residual mean=-0.000009 rms=0.000987 Jy/beam ! Combined flux in latest and established models = 0.612678 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 232 components and 0.612677 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136070Jy sigma=0.000805 ! Fit after self-cal, rms=0.136056Jy sigma=0.000805 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.074 mas, bmaj=7.281 mas, bpa=-2.336 degrees ! Estimated noise=505.665 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.074 x 7.281 at -2.336 degrees (North through East) ! Clean map min=-0.0028983 max=0.34276 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.589 mas, bmaj=6.425 mas, bpa=-2.986 degrees ! Estimated noise=738.339 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.251913 Jy ! Component: 100 - total flux cleaned = 0.351446 Jy ! Component: 150 - total flux cleaned = 0.405897 Jy ! Component: 200 - total flux cleaned = 0.43887 Jy ! Total flux subtracted in 200 components = 0.43887 Jy ! Clean residual min=-0.011695 max=0.018018 Jy/beam ! Clean residual mean=0.000023 rms=0.003668 Jy/beam ! Combined flux in latest and established models = 0.43887 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.43887 Jy ! Inverting map and beam ! Estimated beam: bmin=3.074 mas, bmaj=7.281 mas, bpa=-2.336 degrees ! Estimated noise=505.665 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0322095 Jy ! Component: 100 - total flux cleaned = 0.0545999 Jy ! Component: 150 - total flux cleaned = 0.0722754 Jy ! Component: 200 - total flux cleaned = 0.0868043 Jy ! Total flux subtracted in 200 components = 0.0868043 Jy ! Clean residual min=-0.007544 max=0.013725 Jy/beam ! Clean residual mean=-0.000009 rms=0.002449 Jy/beam ! Combined flux in latest and established models = 0.525674 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 65 components and 0.525674 Jy ! Inverting map ! Added new window around map position (4.5, -0.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0136479 Jy ! Component: 100 - total flux cleaned = 0.0238955 Jy ! Component: 150 - total flux cleaned = 0.0324794 Jy ! Component: 200 - total flux cleaned = 0.0397664 Jy ! Total flux subtracted in 200 components = 0.0397664 Jy ! Clean residual min=-0.004722 max=0.005306 Jy/beam ! Clean residual mean=-0.000011 rms=0.001407 Jy/beam ! Combined flux in latest and established models = 0.565441 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 107 components and 0.565441 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.091 mas, bmaj=12.7 mas, bpa=1.454 degrees ! Estimated noise=662.965 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0111524 Jy ! Component: 100 - total flux cleaned = 0.0188404 Jy ! Component: 150 - total flux cleaned = 0.0247601 Jy ! Component: 200 - total flux cleaned = 0.0295053 Jy ! Total flux subtracted in 200 components = 0.0295053 Jy ! Clean residual min=-0.004245 max=0.004589 Jy/beam ! Clean residual mean=-0.000019 rms=0.001363 Jy/beam ! Combined flux in latest and established models = 0.594946 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00389562 Jy ! Component: 100 - total flux cleaned = 0.00637905 Jy ! Component: 150 - total flux cleaned = 0.00871042 Jy ! Component: 200 - total flux cleaned = 0.0106009 Jy ! Total flux subtracted in 200 components = 0.0106009 Jy ! Clean residual min=-0.003554 max=0.004031 Jy/beam ! Clean residual mean=-0.000015 rms=0.001077 Jy/beam ! Combined flux in latest and established models = 0.605547 Jy ! Adding 130 model components to the UV plane model. ! The established model now contains 221 components and 0.605547 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.074 mas, bmaj=7.281 mas, bpa=-2.336 degrees ! Estimated noise=505.665 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00179968 Jy ! Component: 100 - total flux cleaned = 0.00285395 Jy ! Component: 150 - total flux cleaned = 0.00402121 Jy ! Component: 200 - total flux cleaned = 0.00500118 Jy ! Total flux subtracted in 200 components = 0.00500118 Jy ! Clean residual min=-0.002725 max=0.003072 Jy/beam ! Clean residual mean=-0.000006 rms=0.000727 Jy/beam ! Combined flux in latest and established models = 0.610548 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 245 components and 0.610548 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136027Jy sigma=0.000804 ! Fit after self-cal, rms=0.136004Jy sigma=0.000804 wmodel J1506-0919_S_2015_01_22_pus_map.mod ! Writing 245 model components to file: J1506-0919_S_2015_01_22_pus_map.mod wobs J1506-0919_S_2015_01_22_pus_uvs.fits ! Writing UV FITS file: J1506-0919_S_2015_01_22_pus_uvs.fits wwins J1506-0919_S_2015_01_22_pus_map.win ! wwins: Wrote 6 windows to J1506-0919_S_2015_01_22_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000374102 Jy ! Component: 100 - total flux cleaned = 0.000242093 Jy ! Component: 150 - total flux cleaned = 0.000199617 Jy ! Component: 200 - total flux cleaned = 0.000240779 Jy ! Component: 250 - total flux cleaned = 4.95708e-06 Jy ! Component: 300 - total flux cleaned = -0.000183507 Jy ! Component: 350 - total flux cleaned = -0.000330087 Jy ! Component: 400 - total flux cleaned = -0.000507816 Jy ! Component: 450 - total flux cleaned = -0.000680096 Jy ! Component: 500 - total flux cleaned = -0.000780745 Jy ! Component: 550 - total flux cleaned = -0.000879235 Jy ! Component: 600 - total flux cleaned = -0.00113489 Jy ! Component: 650 - total flux cleaned = -0.00129014 Jy ! Component: 700 - total flux cleaned = -0.00144231 Jy ! Component: 750 - total flux cleaned = -0.00162031 Jy ! Component: 800 - total flux cleaned = -0.00179507 Jy ! Component: 850 - total flux cleaned = -0.0020516 Jy ! Component: 900 - total flux cleaned = -0.00219109 Jy ! Component: 950 - total flux cleaned = -0.002356 Jy ! Component: 1000 - total flux cleaned = -0.00259808 Jy ! Component: 1050 - total flux cleaned = -0.00278259 Jy ! Component: 1100 - total flux cleaned = -0.00293769 Jy ! Component: 1150 - total flux cleaned = -0.00298875 Jy ! Component: 1200 - total flux cleaned = -0.00313959 Jy ! Component: 1250 - total flux cleaned = -0.00323871 Jy ! Component: 1300 - total flux cleaned = -0.00345721 Jy ! Component: 1350 - total flux cleaned = -0.00364752 Jy ! Component: 1400 - total flux cleaned = -0.00371808 Jy ! Component: 1450 - total flux cleaned = -0.00385738 Jy ! Component: 1500 - total flux cleaned = -0.00397094 Jy ! Component: 1550 - total flux cleaned = -0.00408295 Jy ! Component: 1600 - total flux cleaned = -0.00419374 Jy ! Component: 1650 - total flux cleaned = -0.00428172 Jy ! Component: 1700 - total flux cleaned = -0.00449685 Jy ! Component: 1750 - total flux cleaned = -0.00460267 Jy ! Component: 1800 - total flux cleaned = -0.0047071 Jy ! Component: 1850 - total flux cleaned = -0.004769 Jy ! Component: 1900 - total flux cleaned = -0.0049724 Jy ! Component: 1950 - total flux cleaned = -0.00507272 Jy ! Component: 2000 - total flux cleaned = -0.00513245 Jy ! Component: 2050 - total flux cleaned = -0.00523061 Jy ! Component: 2100 - total flux cleaned = -0.0052695 Jy ! Component: 2150 - total flux cleaned = -0.00530799 Jy ! Component: 2200 - total flux cleaned = -0.0053456 Jy ! Component: 2250 - total flux cleaned = -0.00543886 Jy ! Component: 2300 - total flux cleaned = -0.00542053 Jy ! Component: 2350 - total flux cleaned = -0.00553011 Jy ! Component: 2400 - total flux cleaned = -0.00551212 Jy ! Component: 2450 - total flux cleaned = -0.00561896 Jy ! Component: 2500 - total flux cleaned = -0.00560144 Jy ! Component: 2550 - total flux cleaned = -0.00556658 Jy ! Component: 2600 - total flux cleaned = -0.00560126 Jy ! Component: 2650 - total flux cleaned = -0.00565241 Jy ! Component: 2700 - total flux cleaned = -0.00571982 Jy ! Component: 2750 - total flux cleaned = -0.00578625 Jy ! Component: 2800 - total flux cleaned = -0.00580232 Jy ! Component: 2850 - total flux cleaned = -0.00581866 Jy ! Component: 2900 - total flux cleaned = -0.00593153 Jy ! Component: 2950 - total flux cleaned = -0.00589934 Jy ! Component: 3000 - total flux cleaned = -0.00589981 Jy ! Component: 3050 - total flux cleaned = -0.00604005 Jy ! Component: 3100 - total flux cleaned = -0.00603993 Jy ! Component: 3150 - total flux cleaned = -0.00610125 Jy ! Component: 3200 - total flux cleaned = -0.00610109 Jy ! Component: 3250 - total flux cleaned = -0.00616105 Jy ! Component: 3300 - total flux cleaned = -0.00614621 Jy ! Component: 3350 - total flux cleaned = -0.00619067 Jy ! Component: 3400 - total flux cleaned = -0.00629262 Jy ! Component: 3450 - total flux cleaned = -0.00635001 Jy ! Component: 3500 - total flux cleaned = -0.00634997 Jy ! Component: 3550 - total flux cleaned = -0.00640666 Jy ! Component: 3600 - total flux cleaned = -0.00646277 Jy ! Component: 3650 - total flux cleaned = -0.00644857 Jy ! Component: 3700 - total flux cleaned = -0.00643472 Jy ! Component: 3750 - total flux cleaned = -0.00642129 Jy ! Component: 3800 - total flux cleaned = -0.00642127 Jy ! Component: 3850 - total flux cleaned = -0.00640811 Jy ! Component: 3900 - total flux cleaned = -0.0064083 Jy ! Component: 3950 - total flux cleaned = -0.00644785 Jy ! Component: 4000 - total flux cleaned = -0.00649999 Jy ! Component: 4050 - total flux cleaned = -0.00649978 Jy ! Total flux subtracted in 4096 components = -0.00649979 Jy ! Clean residual min=-0.000734 max=0.000728 Jy/beam ! Clean residual mean=-0.000001 rms=0.000237 Jy/beam ! Combined flux in latest and established models = 0.604049 Jy keep ! Adding 290 model components to the UV plane model. ! The established model now contains 535 components and 0.604048 Jy ![Exited script file: muppet] wmap "J1506-0919_S_2015_01_22_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.074 x 7.281 at -2.336 degrees (North through East) ! Clean map min=-0.0017397 max=0.34501 Jy/beam ! Writing clean map to FITS file: J1506-0919_S_2015_01_22_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.345006 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000232287 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.201985 0.201985 0.40397 0.807939 1.61588 3.23176 6.46351 12.927 25.8541 51.7081 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.345 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.074 x 7.281 at -2.336 degrees (North through East) ! Clean map min=-0.0017397 max=0.34501 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1506-0919_S_2015_01_22_pus_uvs.log closed on Tue Jan 3 22:57:09 2017