! Started logfile: J1505-3432_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:30:37 2017 obs J1505-3432_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J1505-3432_S_2014_01_04_pus_uva.fits ! AN table 1: 76 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.430556 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1505-3432 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 4712 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1505-3432_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 228 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 228 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 228 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 228 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.013120Jy sigma=0.009333 ! Fit after self-cal, rms=0.931737Jy sigma=0.008592 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.482 mas, bmaj=6.899 mas, bpa=-4.19 degrees ! Estimated noise=1697.54 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0568305 Jy ! Component: 100 - total flux cleaned = 0.0705712 Jy ! Total flux subtracted in 100 components = 0.0705712 Jy ! Clean residual min=-0.010011 max=0.007775 Jy/beam ! Clean residual mean=0.000015 rms=0.002199 Jy/beam ! Combined flux in latest and established models = 0.0705712 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0705712 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105464Jy sigma=0.000893 ! Fit after self-cal, rms=0.104001Jy sigma=0.000881 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.984 mas, bmaj=8.456 mas, bpa=-4.006 degrees ! Estimated noise=1145.56 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00756647 Jy ! Component: 100 - total flux cleaned = 0.0110484 Jy ! Component: 150 - total flux cleaned = 0.0128305 Jy ! Component: 200 - total flux cleaned = 0.0134921 Jy ! Total flux subtracted in 200 components = 0.0134921 Jy ! Clean residual min=-0.009650 max=0.005739 Jy/beam ! Clean residual mean=-0.000056 rms=0.001739 Jy/beam ! Combined flux in latest and established models = 0.0840633 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 27 components and 0.0840633 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103443Jy sigma=0.000876 ! Fit after self-cal, rms=0.103495Jy sigma=0.000876 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.78 FD 1.00* KP 1.00* LA 1.22 ! MK 1.09 NL 1.15 OV 1.13 PT 1.09 ! SC 0.89 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.69 FD 1.00* KP 1.00* LA 0.96 ! MK 1.02 NL 1.08 OV 1.06 PT 1.11 ! SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.75 FD 1.00* KP 1.00* LA 0.92 ! MK 1.00 NL 1.06 OV 1.01 PT 1.09 ! SC 1.21 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00* KP 1.00* LA 1.01 ! MK 1.03 NL 1.17 OV 1.23 PT 1.08 ! SC 0.96 ! ! ! Fit before self-cal, rms=0.103495Jy sigma=0.000876 ! Fit after self-cal, rms=0.103543Jy sigma=0.000865 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.019 mas, bmaj=8.384 mas, bpa=-3.63 degrees ! Estimated noise=1151.93 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000991284 Jy ! Component: 100 - total flux cleaned = 0.00111193 Jy ! Component: 150 - total flux cleaned = 0.00116443 Jy ! Component: 200 - total flux cleaned = 0.00122705 Jy ! Total flux subtracted in 200 components = 0.00122705 Jy ! Clean residual min=-0.004242 max=0.004380 Jy/beam ! Clean residual mean=0.000031 rms=0.001101 Jy/beam ! Combined flux in latest and established models = 0.0852904 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 35 components and 0.0852904 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103522Jy sigma=0.000865 ! Fit after self-cal, rms=0.105133Jy sigma=0.000861 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105133Jy sigma=0.000861 ! Fit after self-cal, rms=0.110998Jy sigma=0.000857 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.04 mas, bmaj=8.357 mas, bpa=-3.248 degrees ! Estimated noise=1171.86 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00109339 Jy ! Component: 100 - total flux cleaned = 0.0013137 Jy ! Component: 150 - total flux cleaned = 0.00140466 Jy ! Component: 200 - total flux cleaned = 0.00150938 Jy ! Total flux subtracted in 200 components = 0.00150938 Jy ! Clean residual min=-0.004167 max=0.004056 Jy/beam ! Clean residual mean=-0.000041 rms=0.000971 Jy/beam ! Combined flux in latest and established models = 0.0867997 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 42 components and 0.0867997 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110955Jy sigma=0.000857 ! Fit after self-cal, rms=0.112246Jy sigma=0.000855 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000497208 Jy ! Component: 100 - total flux cleaned = -0.000465266 Jy ! Component: 150 - total flux cleaned = -0.000376069 Jy ! Component: 200 - total flux cleaned = -0.000273653 Jy ! Total flux subtracted in 200 components = -0.000273653 Jy ! Clean residual min=-0.004279 max=0.004009 Jy/beam ! Clean residual mean=-0.000056 rms=0.001016 Jy/beam ! Combined flux in latest and established models = 0.0865261 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 55 components and 0.0865261 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112209Jy sigma=0.000855 ! Fit after self-cal, rms=0.112258Jy sigma=0.000855 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112258Jy sigma=0.000855 ! Fit after self-cal, rms=0.116787Jy sigma=0.000854 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.046 mas, bmaj=8.31 mas, bpa=-2.81 degrees ! Estimated noise=1182.81 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00130846 Jy ! Component: 100 - total flux cleaned = 0.00150258 Jy ! Component: 150 - total flux cleaned = 0.00158319 Jy ! Component: 200 - total flux cleaned = 0.00167817 Jy ! Total flux subtracted in 200 components = 0.00167817 Jy ! Clean residual min=-0.004275 max=0.003833 Jy/beam ! Clean residual mean=-0.000061 rms=0.000961 Jy/beam ! Combined flux in latest and established models = 0.0882043 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 63 components and 0.0882043 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116744Jy sigma=0.000854 ! Fit after self-cal, rms=0.117627Jy sigma=0.000854 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000317242 Jy ! Component: 100 - total flux cleaned = -0.000321766 Jy ! Component: 150 - total flux cleaned = -0.000305105 Jy ! Component: 200 - total flux cleaned = -0.000253961 Jy ! Total flux subtracted in 200 components = -0.000253961 Jy ! Clean residual min=-0.004212 max=0.003836 Jy/beam ! Clean residual mean=-0.000063 rms=0.000965 Jy/beam ! Combined flux in latest and established models = 0.0879503 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 66 components and 0.0879503 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117600Jy sigma=0.000854 ! Fit after self-cal, rms=0.117651Jy sigma=0.000854 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117651Jy sigma=0.000854 ! Fit after self-cal, rms=0.121015Jy sigma=0.000853 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.435 mas, bmaj=20.09 mas, bpa=5.379 degrees ! Estimated noise=1494.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000912415 Jy ! Component: 100 - total flux cleaned = 0.000953583 Jy ! Component: 150 - total flux cleaned = 0.000963571 Jy ! Component: 200 - total flux cleaned = 0.000955338 Jy ! Total flux subtracted in 200 components = 0.000955338 Jy ! Clean residual min=-0.004294 max=0.003955 Jy/beam ! Clean residual mean=-0.000155 rms=0.001311 Jy/beam ! Combined flux in latest and established models = 0.0889056 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 68 components and 0.0889056 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121001Jy sigma=0.000853 ! Fit after self-cal, rms=0.121687Jy sigma=0.000853 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000601189 Jy ! Component: 100 - total flux cleaned = -0.000631924 Jy ! Component: 150 - total flux cleaned = -0.000645373 Jy ! Component: 200 - total flux cleaned = -0.000657073 Jy ! Total flux subtracted in 200 components = -0.000657073 Jy ! Clean residual min=-0.004305 max=0.003898 Jy/beam ! Clean residual mean=-0.000148 rms=0.001240 Jy/beam ! Combined flux in latest and established models = 0.0882486 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 68 components and 0.0882486 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121691Jy sigma=0.000853 ! Fit after self-cal, rms=0.121695Jy sigma=0.000853 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.039 mas, bmaj=8.259 mas, bpa=-2.486 degrees ! Estimated noise=1190.42 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.039 x 8.259 at -2.486 degrees (North through East) ! Clean map min=-0.0037236 max=0.070058 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.517 mas, bmaj=6.705 mas, bpa=-2.467 degrees ! Estimated noise=1723.96 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.057102 Jy ! Component: 100 - total flux cleaned = 0.0716585 Jy ! Component: 150 - total flux cleaned = 0.0791797 Jy ! Component: 200 - total flux cleaned = 0.0834664 Jy ! Total flux subtracted in 200 components = 0.0834664 Jy ! Clean residual min=-0.005305 max=0.004695 Jy/beam ! Clean residual mean=-0.000009 rms=0.001398 Jy/beam ! Combined flux in latest and established models = 0.0834664 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.0834664 Jy ! Inverting map and beam ! Estimated beam: bmin=3.039 mas, bmaj=8.259 mas, bpa=-2.486 degrees ! Estimated noise=1190.42 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00329845 Jy ! Component: 100 - total flux cleaned = 0.00431268 Jy ! Component: 150 - total flux cleaned = 0.00449668 Jy ! Component: 200 - total flux cleaned = 0.00464414 Jy ! Total flux subtracted in 200 components = 0.00464414 Jy ! Clean residual min=-0.004150 max=0.003649 Jy/beam ! Clean residual mean=-0.000071 rms=0.000942 Jy/beam ! Combined flux in latest and established models = 0.0881106 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 27 components and 0.0881106 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.435 mas, bmaj=20.09 mas, bpa=5.379 degrees ! Estimated noise=1494.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000289666 Jy ! Component: 100 - total flux cleaned = 0.000277352 Jy ! Component: 150 - total flux cleaned = 0.000234304 Jy ! Component: 200 - total flux cleaned = 0.00020579 Jy ! Total flux subtracted in 200 components = 0.00020579 Jy ! Clean residual min=-0.004385 max=0.003889 Jy/beam ! Clean residual mean=-0.000159 rms=0.001234 Jy/beam ! Combined flux in latest and established models = 0.0883164 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.79081e-05 Jy ! Component: 100 - total flux cleaned = -4.30373e-05 Jy ! Component: 150 - total flux cleaned = -5.86953e-05 Jy ! Component: 200 - total flux cleaned = -8.09424e-05 Jy ! Total flux subtracted in 200 components = -8.09424e-05 Jy ! Clean residual min=-0.004384 max=0.003875 Jy/beam ! Clean residual mean=-0.000157 rms=0.001227 Jy/beam ! Combined flux in latest and established models = 0.0882354 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 41 components and 0.0882354 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.039 mas, bmaj=8.259 mas, bpa=-2.486 degrees ! Estimated noise=1190.42 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.36896e-05 Jy ! Component: 100 - total flux cleaned = 0.000171643 Jy ! Component: 150 - total flux cleaned = 0.000233871 Jy ! Component: 200 - total flux cleaned = 0.000291038 Jy ! Total flux subtracted in 200 components = 0.000291038 Jy ! Clean residual min=-0.004127 max=0.003761 Jy/beam ! Clean residual mean=-0.000074 rms=0.000936 Jy/beam ! Combined flux in latest and established models = 0.0885264 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 49 components and 0.0885264 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121681Jy sigma=0.000853 ! Fit after self-cal, rms=0.121697Jy sigma=0.000853 wmodel J1505-3432_S_2014_01_04_pus_map.mod ! Writing 49 model components to file: J1505-3432_S_2014_01_04_pus_map.mod wobs J1505-3432_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J1505-3432_S_2014_01_04_pus_uvs.fits wwins J1505-3432_S_2014_01_04_pus_map.win ! wwins: Wrote 1 windows to J1505-3432_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000656563 Jy ! Component: 100 - total flux cleaned = -0.000112948 Jy ! Component: 150 - total flux cleaned = 0.000280554 Jy ! Component: 200 - total flux cleaned = 0.000548228 Jy ! Component: 250 - total flux cleaned = 0.000752922 Jy ! Component: 300 - total flux cleaned = 0.000850159 Jy ! Component: 350 - total flux cleaned = 0.00108464 Jy ! Component: 400 - total flux cleaned = 0.00135496 Jy ! Component: 450 - total flux cleaned = 0.001703 Jy ! Component: 500 - total flux cleaned = 0.00195461 Jy ! Component: 550 - total flux cleaned = 0.00228023 Jy ! Component: 600 - total flux cleaned = 0.00247743 Jy ! Component: 650 - total flux cleaned = 0.00270791 Jy ! Component: 700 - total flux cleaned = 0.00289492 Jy ! Component: 750 - total flux cleaned = 0.00314941 Jy ! Component: 800 - total flux cleaned = 0.00329092 Jy ! Component: 850 - total flux cleaned = 0.00342965 Jy ! Component: 900 - total flux cleaned = 0.00359867 Jy ! Component: 950 - total flux cleaned = 0.0037305 Jy ! Component: 1000 - total flux cleaned = 0.00389259 Jy ! Component: 1050 - total flux cleaned = 0.00405056 Jy ! Component: 1100 - total flux cleaned = 0.00405025 Jy ! Component: 1150 - total flux cleaned = 0.00414148 Jy ! Component: 1200 - total flux cleaned = 0.00420108 Jy ! Component: 1250 - total flux cleaned = 0.00428894 Jy ! Component: 1300 - total flux cleaned = 0.00440419 Jy ! Component: 1350 - total flux cleaned = 0.00437571 Jy ! Component: 1400 - total flux cleaned = 0.00446037 Jy ! Component: 1450 - total flux cleaned = 0.00459827 Jy ! Component: 1500 - total flux cleaned = 0.0046522 Jy ! Component: 1550 - total flux cleaned = 0.00467909 Jy ! Component: 1600 - total flux cleaned = 0.00475841 Jy ! Component: 1650 - total flux cleaned = 0.00478402 Jy ! Component: 1700 - total flux cleaned = 0.00473226 Jy ! Component: 1750 - total flux cleaned = 0.00473249 Jy ! Component: 1800 - total flux cleaned = 0.00473252 Jy ! Component: 1850 - total flux cleaned = 0.00475727 Jy ! Component: 1900 - total flux cleaned = 0.00463316 Jy ! Component: 1950 - total flux cleaned = 0.00465769 Jy ! Component: 2000 - total flux cleaned = 0.0046093 Jy ! Component: 2050 - total flux cleaned = 0.00463341 Jy ! Component: 2100 - total flux cleaned = 0.0046093 Jy ! Component: 2150 - total flux cleaned = 0.00451458 Jy ! Component: 2200 - total flux cleaned = 0.00453801 Jy ! Component: 2250 - total flux cleaned = 0.00446812 Jy ! Component: 2300 - total flux cleaned = 0.00439883 Jy ! Component: 2350 - total flux cleaned = 0.00439896 Jy ! Component: 2400 - total flux cleaned = 0.00435334 Jy ! Component: 2450 - total flux cleaned = 0.00433072 Jy ! Component: 2500 - total flux cleaned = 0.00433077 Jy ! Component: 2550 - total flux cleaned = 0.00421896 Jy ! Component: 2600 - total flux cleaned = 0.00419686 Jy ! Component: 2650 - total flux cleaned = 0.00415276 Jy ! Component: 2700 - total flux cleaned = 0.00408673 Jy ! Component: 2750 - total flux cleaned = 0.00402115 Jy ! Component: 2800 - total flux cleaned = 0.00391225 Jy ! Component: 2850 - total flux cleaned = 0.00380382 Jy ! Component: 2900 - total flux cleaned = 0.00373903 Jy ! Component: 2950 - total flux cleaned = 0.0036744 Jy ! Component: 3000 - total flux cleaned = 0.0035886 Jy ! Component: 3050 - total flux cleaned = 0.00352437 Jy ! Component: 3100 - total flux cleaned = 0.00339639 Jy ! Component: 3150 - total flux cleaned = 0.00335389 Jy ! Component: 3200 - total flux cleaned = 0.00329019 Jy ! Component: 3250 - total flux cleaned = 0.00318437 Jy ! Component: 3300 - total flux cleaned = 0.00316325 Jy ! Component: 3350 - total flux cleaned = 0.00312107 Jy ! Component: 3400 - total flux cleaned = 0.00305786 Jy ! Component: 3450 - total flux cleaned = 0.0029739 Jy ! Component: 3500 - total flux cleaned = 0.0029949 Jy ! Component: 3550 - total flux cleaned = 0.00293187 Jy ! Component: 3600 - total flux cleaned = 0.00286894 Jy ! Component: 3650 - total flux cleaned = 0.00286902 Jy ! Component: 3700 - total flux cleaned = 0.00278519 Jy ! Component: 3750 - total flux cleaned = 0.0027434 Jy ! Component: 3800 - total flux cleaned = 0.00272242 Jy ! Component: 3850 - total flux cleaned = 0.00265976 Jy ! Component: 3900 - total flux cleaned = 0.00265977 Jy ! Component: 3950 - total flux cleaned = 0.00255541 Jy ! Component: 4000 - total flux cleaned = 0.00257627 Jy ! Component: 4050 - total flux cleaned = 0.00251362 Jy ! Total flux subtracted in 4096 components = 0.002472 Jy ! Clean residual min=-0.001437 max=0.001321 Jy/beam ! Clean residual mean=-0.000026 rms=0.000354 Jy/beam ! Combined flux in latest and established models = 0.0909984 Jy keep ! Adding 214 model components to the UV plane model. ! The established model now contains 263 components and 0.0909984 Jy ![Exited script file: muppet] wmap "J1505-3432_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.039 x 8.259 at -2.486 degrees (North through East) ! Clean map min=-0.0035148 max=0.068917 Jy/beam ! Writing clean map to FITS file: J1505-3432_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0689166 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000333554 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.45199 1.45199 2.90398 5.80796 11.6159 23.2318 46.4637 92.9273 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.068 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.039 x 8.259 at -2.486 degrees (North through East) ! Clean map min=-0.0035148 max=0.068917 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1505-3432_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:30:42 2017