! Started logfile: J1505+0326_S_2015_01_23_pus_uvs.log on Mon Jan 2 19:28:11 2017 obs J1505+0326_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J1505+0326_S_2015_01_23_pus_uva.fits ! AN table 1: 14 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.930159 visibilities/baseline/integration-bin. ! Found source: J1505+0326 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 2344 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1505+0326_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.610043Jy sigma=0.005684 ! Fit after self-cal, rms=0.602085Jy sigma=0.005590 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.843 mas, bmaj=6.908 mas, bpa=-8.419 degrees ! Estimated noise=1851.01 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.351891 Jy ! Component: 100 - total flux cleaned = 0.430057 Jy ! Total flux subtracted in 100 components = 0.430057 Jy ! Clean residual min=-0.023428 max=0.040313 Jy/beam ! Clean residual mean=-0.000024 rms=0.007001 Jy/beam ! Combined flux in latest and established models = 0.430057 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.430057 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179826Jy sigma=0.001270 ! Fit after self-cal, rms=0.179843Jy sigma=0.001270 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.325 mas, bmaj=7.545 mas, bpa=-7.705 degrees ! Estimated noise=1499.02 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (24.5, -18). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0493614 Jy ! Component: 100 - total flux cleaned = 0.0762589 Jy ! Component: 150 - total flux cleaned = 0.0951339 Jy ! Component: 200 - total flux cleaned = 0.104986 Jy ! Total flux subtracted in 200 components = 0.104986 Jy ! Clean residual min=-0.016613 max=0.026697 Jy/beam ! Clean residual mean=-0.000004 rms=0.005617 Jy/beam ! Combined flux in latest and established models = 0.535043 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 45 components and 0.535043 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161166Jy sigma=0.001081 ! Fit after self-cal, rms=0.160150Jy sigma=0.001068 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 2.00 HN 0.90 KP 1.11 ! LA 1.01 MK 1.04 NL 0.90 OV 0.97 ! PT 1.02 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 2.14 HN 0.98 KP 1.02 ! LA 0.98 MK 1.03 NL 0.97 OV 1.01 ! PT 1.03 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 2.62 HN 0.96 KP 0.87 ! LA 0.80 MK 1.07 NL 1.10 OV 0.94 ! PT 0.99 SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 2.28 HN 0.92 KP 0.81 ! LA 0.85 MK 1.03 NL 0.91 OV 0.98 ! PT 1.06 SC 1.00 ! ! ! Fit before self-cal, rms=0.160150Jy sigma=0.001068 ! Fit after self-cal, rms=0.205568Jy sigma=0.000810 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.342 mas, bmaj=7.529 mas, bpa=-7.59 degrees ! Estimated noise=1515.57 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00667808 Jy ! Component: 100 - total flux cleaned = -0.00842126 Jy ! Component: 150 - total flux cleaned = -0.00970999 Jy ! Component: 200 - total flux cleaned = -0.0101199 Jy ! Total flux subtracted in 200 components = -0.0101199 Jy ! Clean residual min=-0.005923 max=0.005752 Jy/beam ! Clean residual mean=-0.000005 rms=0.001474 Jy/beam ! Combined flux in latest and established models = 0.524923 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 59 components and 0.524923 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.205130Jy sigma=0.000803 ! Fit after self-cal, rms=0.205337Jy sigma=0.000802 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.205337Jy sigma=0.000802 ! Fit after self-cal, rms=0.208152Jy sigma=0.000802 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.347 mas, bmaj=7.536 mas, bpa=-7.544 degrees ! Estimated noise=1514.47 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00376994 Jy ! Component: 100 - total flux cleaned = -0.00493666 Jy ! Component: 150 - total flux cleaned = -0.00560251 Jy ! Component: 200 - total flux cleaned = -0.00560203 Jy ! Total flux subtracted in 200 components = -0.00560203 Jy ! Clean residual min=-0.005624 max=0.005190 Jy/beam ! Clean residual mean=-0.000004 rms=0.001335 Jy/beam ! Combined flux in latest and established models = 0.519321 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 69 components and 0.519321 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.207944Jy sigma=0.000798 ! Fit after self-cal, rms=0.207958Jy sigma=0.000798 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.07393e-05 Jy ! Component: 100 - total flux cleaned = -0.000254251 Jy ! Component: 150 - total flux cleaned = -0.000424904 Jy ! Component: 200 - total flux cleaned = -0.000424738 Jy ! Total flux subtracted in 200 components = -0.000424738 Jy ! Clean residual min=-0.005335 max=0.004947 Jy/beam ! Clean residual mean=-0.000005 rms=0.001285 Jy/beam ! Combined flux in latest and established models = 0.518897 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 77 components and 0.518897 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.207840Jy sigma=0.000797 ! Fit after self-cal, rms=0.207848Jy sigma=0.000797 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.207848Jy sigma=0.000797 ! Fit after self-cal, rms=0.210909Jy sigma=0.000796 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.351 mas, bmaj=7.539 mas, bpa=-7.52 degrees ! Estimated noise=1514.52 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00266407 Jy ! Component: 100 - total flux cleaned = -0.00315444 Jy ! Component: 150 - total flux cleaned = -0.00329994 Jy ! Component: 200 - total flux cleaned = -0.00336653 Jy ! Total flux subtracted in 200 components = -0.00336653 Jy ! Clean residual min=-0.005079 max=0.004747 Jy/beam ! Clean residual mean=-0.000004 rms=0.001226 Jy/beam ! Combined flux in latest and established models = 0.51553 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 83 components and 0.51553 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.210802Jy sigma=0.000795 ! Fit after self-cal, rms=0.210809Jy sigma=0.000795 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000193769 Jy ! Component: 100 - total flux cleaned = -0.000323137 Jy ! Component: 150 - total flux cleaned = -0.000382441 Jy ! Component: 200 - total flux cleaned = -0.000382661 Jy ! Total flux subtracted in 200 components = -0.000382661 Jy ! Clean residual min=-0.004895 max=0.004766 Jy/beam ! Clean residual mean=-0.000004 rms=0.001205 Jy/beam ! Combined flux in latest and established models = 0.515148 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 87 components and 0.515148 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.210734Jy sigma=0.000794 ! Fit after self-cal, rms=0.210737Jy sigma=0.000794 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.210737Jy sigma=0.000794 ! Fit after self-cal, rms=0.212773Jy sigma=0.000794 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.528 mas, bmaj=11.81 mas, bpa=3.907 degrees ! Estimated noise=1922.25 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00220604 Jy ! Component: 100 - total flux cleaned = -0.0025092 Jy ! Component: 150 - total flux cleaned = -0.00279848 Jy ! Component: 200 - total flux cleaned = -0.00301044 Jy ! Total flux subtracted in 200 components = -0.00301044 Jy ! Clean residual min=-0.005221 max=0.005532 Jy/beam ! Clean residual mean=-0.000009 rms=0.001451 Jy/beam ! Combined flux in latest and established models = 0.512137 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 107 components and 0.512137 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.212686Jy sigma=0.000794 ! Fit after self-cal, rms=0.212684Jy sigma=0.000794 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00028595 Jy ! Component: 100 - total flux cleaned = -0.000286109 Jy ! Component: 150 - total flux cleaned = -0.000318287 Jy ! Component: 200 - total flux cleaned = -0.000291596 Jy ! Total flux subtracted in 200 components = -0.000291596 Jy ! Clean residual min=-0.005222 max=0.005493 Jy/beam ! Clean residual mean=-0.000010 rms=0.001450 Jy/beam ! Combined flux in latest and established models = 0.511845 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 120 components and 0.511845 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.212629Jy sigma=0.000794 ! Fit after self-cal, rms=0.212629Jy sigma=0.000794 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.354 mas, bmaj=7.545 mas, bpa=-7.519 degrees ! Estimated noise=1514.11 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.354 x 7.545 at -7.519 degrees (North through East) ! Clean map min=-0.0051177 max=0.43184 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.872 mas, bmaj=6.911 mas, bpa=-8.261 degrees ! Estimated noise=1861.19 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.353653 Jy ! Component: 100 - total flux cleaned = 0.432585 Jy ! Component: 150 - total flux cleaned = 0.460795 Jy ! Component: 200 - total flux cleaned = 0.475703 Jy ! Total flux subtracted in 200 components = 0.475703 Jy ! Clean residual min=-0.008461 max=0.009663 Jy/beam ! Clean residual mean=-0.000012 rms=0.002076 Jy/beam ! Combined flux in latest and established models = 0.475703 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.475703 Jy ! Inverting map and beam ! Estimated beam: bmin=3.354 mas, bmaj=7.545 mas, bpa=-7.519 degrees ! Estimated noise=1514.11 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-27, 19.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.013364 Jy ! Component: 100 - total flux cleaned = 0.022026 Jy ! Component: 150 - total flux cleaned = 0.0278399 Jy ! Component: 200 - total flux cleaned = 0.0303836 Jy ! Total flux subtracted in 200 components = 0.0303836 Jy ! Clean residual min=-0.004719 max=0.005216 Jy/beam ! Clean residual mean=-0.000009 rms=0.001295 Jy/beam ! Combined flux in latest and established models = 0.506087 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 62 components and 0.506087 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.528 mas, bmaj=11.81 mas, bpa=3.907 degrees ! Estimated noise=1922.25 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00414748 Jy ! Component: 100 - total flux cleaned = 0.00475457 Jy ! Component: 150 - total flux cleaned = 0.00467266 Jy ! Component: 200 - total flux cleaned = 0.0046723 Jy ! Total flux subtracted in 200 components = 0.0046723 Jy ! Clean residual min=-0.005169 max=0.005028 Jy/beam ! Clean residual mean=-0.000011 rms=0.001397 Jy/beam ! Combined flux in latest and established models = 0.510759 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.502e-07 Jy ! Component: 100 - total flux cleaned = -6.25228e-05 Jy ! Component: 150 - total flux cleaned = -0.000120102 Jy ! Component: 200 - total flux cleaned = -0.000174584 Jy ! Total flux subtracted in 200 components = -0.000174584 Jy ! Clean residual min=-0.005196 max=0.004951 Jy/beam ! Clean residual mean=-0.000011 rms=0.001371 Jy/beam ! Combined flux in latest and established models = 0.510584 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 109 components and 0.510584 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.354 mas, bmaj=7.545 mas, bpa=-7.519 degrees ! Estimated noise=1514.11 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000804423 Jy ! Component: 100 - total flux cleaned = -0.000705821 Jy ! Component: 150 - total flux cleaned = -0.000543852 Jy ! Component: 200 - total flux cleaned = -0.000468985 Jy ! Total flux subtracted in 200 components = -0.000468985 Jy ! Clean residual min=-0.004543 max=0.004583 Jy/beam ! Clean residual mean=-0.000005 rms=0.001138 Jy/beam ! Combined flux in latest and established models = 0.510115 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 128 components and 0.510115 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.212516Jy sigma=0.000793 ! Fit after self-cal, rms=0.212490Jy sigma=0.000793 wmodel J1505+0326_S_2015_01_23_pus_map.mod ! Writing 128 model components to file: J1505+0326_S_2015_01_23_pus_map.mod wobs J1505+0326_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J1505+0326_S_2015_01_23_pus_uvs.fits wwins J1505+0326_S_2015_01_23_pus_map.win ! wwins: Wrote 3 windows to J1505+0326_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00041252 Jy ! Component: 100 - total flux cleaned = -0.00115632 Jy ! Component: 150 - total flux cleaned = -0.00171736 Jy ! Component: 200 - total flux cleaned = -0.00211956 Jy ! Component: 250 - total flux cleaned = -0.00231124 Jy ! Component: 300 - total flux cleaned = -0.00231247 Jy ! Component: 350 - total flux cleaned = -0.00249333 Jy ! Component: 400 - total flux cleaned = -0.00272611 Jy ! Component: 450 - total flux cleaned = -0.00272655 Jy ! Component: 500 - total flux cleaned = -0.00300243 Jy ! Component: 550 - total flux cleaned = -0.0031077 Jy ! Component: 600 - total flux cleaned = -0.00310809 Jy ! Component: 650 - total flux cleaned = -0.00341541 Jy ! Component: 700 - total flux cleaned = -0.00361461 Jy ! Component: 750 - total flux cleaned = -0.00376196 Jy ! Component: 800 - total flux cleaned = -0.00390573 Jy ! Component: 850 - total flux cleaned = -0.00409266 Jy ! Component: 900 - total flux cleaned = -0.00432358 Jy ! Component: 950 - total flux cleaned = -0.00450512 Jy ! Component: 1000 - total flux cleaned = -0.00468448 Jy ! Component: 1050 - total flux cleaned = -0.00490492 Jy ! Component: 1100 - total flux cleaned = -0.00512161 Jy ! Component: 1150 - total flux cleaned = -0.00533492 Jy ! Component: 1200 - total flux cleaned = -0.00554497 Jy ! Component: 1250 - total flux cleaned = -0.00558584 Jy ! Component: 1300 - total flux cleaned = -0.00558595 Jy ! Component: 1350 - total flux cleaned = -0.00562655 Jy ! Component: 1400 - total flux cleaned = -0.00554642 Jy ! Component: 1450 - total flux cleaned = -0.00550676 Jy ! Component: 1500 - total flux cleaned = -0.0054287 Jy ! Component: 1550 - total flux cleaned = -0.0053521 Jy ! Component: 1600 - total flux cleaned = -0.00523826 Jy ! Component: 1650 - total flux cleaned = -0.00520142 Jy ! Component: 1700 - total flux cleaned = -0.00516458 Jy ! Component: 1750 - total flux cleaned = -0.0052747 Jy ! Component: 1800 - total flux cleaned = -0.00520227 Jy ! Component: 1850 - total flux cleaned = -0.0052024 Jy ! Component: 1900 - total flux cleaned = -0.00527306 Jy ! Component: 1950 - total flux cleaned = -0.00527254 Jy ! Component: 2000 - total flux cleaned = -0.00523761 Jy ! Component: 2050 - total flux cleaned = -0.00520329 Jy ! Component: 2100 - total flux cleaned = -0.00516886 Jy ! Component: 2150 - total flux cleaned = -0.00510098 Jy ! Component: 2200 - total flux cleaned = -0.00510114 Jy ! Component: 2250 - total flux cleaned = -0.0049684 Jy ! Component: 2300 - total flux cleaned = -0.00493574 Jy ! Component: 2350 - total flux cleaned = -0.00503327 Jy ! Component: 2400 - total flux cleaned = -0.00493618 Jy ! Component: 2450 - total flux cleaned = -0.00493636 Jy ! Component: 2500 - total flux cleaned = -0.00493647 Jy ! Component: 2550 - total flux cleaned = -0.00496825 Jy ! Component: 2600 - total flux cleaned = -0.0049996 Jy ! Component: 2650 - total flux cleaned = -0.00503065 Jy ! Component: 2700 - total flux cleaned = -0.0050617 Jy ! Component: 2750 - total flux cleaned = -0.00512315 Jy ! Component: 2800 - total flux cleaned = -0.00515358 Jy ! Component: 2850 - total flux cleaned = -0.00518369 Jy ! Component: 2900 - total flux cleaned = -0.0051237 Jy ! Component: 2950 - total flux cleaned = -0.00512383 Jy ! Component: 3000 - total flux cleaned = -0.00518316 Jy ! Component: 3050 - total flux cleaned = -0.00521247 Jy ! Component: 3100 - total flux cleaned = -0.00515385 Jy ! Component: 3150 - total flux cleaned = -0.00512471 Jy ! Component: 3200 - total flux cleaned = -0.00512483 Jy ! Component: 3250 - total flux cleaned = -0.00509592 Jy ! Component: 3300 - total flux cleaned = -0.00518153 Jy ! Component: 3350 - total flux cleaned = -0.00518173 Jy ! Component: 3400 - total flux cleaned = -0.0052382 Jy ! Component: 3450 - total flux cleaned = -0.00512566 Jy ! Component: 3500 - total flux cleaned = -0.00512562 Jy ! Component: 3550 - total flux cleaned = -0.00515341 Jy ! Component: 3600 - total flux cleaned = -0.00512556 Jy ! Component: 3650 - total flux cleaned = -0.00509818 Jy ! Component: 3700 - total flux cleaned = -0.00507078 Jy ! Component: 3750 - total flux cleaned = -0.00504378 Jy ! Component: 3800 - total flux cleaned = -0.00512516 Jy ! Component: 3850 - total flux cleaned = -0.00509818 Jy ! Component: 3900 - total flux cleaned = -0.00504479 Jy ! Component: 3950 - total flux cleaned = -0.00512494 Jy ! Component: 4000 - total flux cleaned = -0.00509817 Jy ! Component: 4050 - total flux cleaned = -0.0050718 Jy ! Total flux subtracted in 4096 components = -0.00504553 Jy ! Clean residual min=-0.001551 max=0.001590 Jy/beam ! Clean residual mean=-0.000005 rms=0.000496 Jy/beam ! Combined flux in latest and established models = 0.50507 Jy keep ! Adding 286 model components to the UV plane model. ! The established model now contains 414 components and 0.50507 Jy ![Exited script file: muppet] wmap "J1505+0326_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.354 x 7.545 at -7.519 degrees (North through East) ! Clean map min=-0.0031566 max=0.43672 Jy/beam ! Writing clean map to FITS file: J1505+0326_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.436718 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000484464 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.332799 0.332799 0.665598 1.3312 2.66239 5.32478 10.6496 21.2991 42.5982 85.1965 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.436 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.354 x 7.545 at -7.519 degrees (North through East) ! Clean map min=-0.0031566 max=0.43672 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1505+0326_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 19:28:15 2017