! Started logfile: J1505+0326_S_2015_01_22_pus_uvs.log on Tue Jan 3 22:56:58 2017 obs J1505+0326_S_2015_01_22_pus_uva.fits ! Reading UV FITS file: J1505+0326_S_2015_01_22_pus_uva.fits ! AN table 1: 16 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.8 visibilities/baseline/integration-bin. ! Found source: J1505+0326 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 281 lines of history. ! ! Reading 2304 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1505+0326_S_2015_01_22_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.568039Jy sigma=0.006970 ! Fit after self-cal, rms=0.559647Jy sigma=0.006876 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.65 mas, bmaj=6.755 mas, bpa=-7.763 degrees ! Estimated noise=1466.89 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.342578 Jy ! Component: 100 - total flux cleaned = 0.418579 Jy ! Total flux subtracted in 100 components = 0.418579 Jy ! Clean residual min=-0.020925 max=0.036581 Jy/beam ! Clean residual mean=0.000031 rms=0.006463 Jy/beam ! Combined flux in latest and established models = 0.418579 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.418579 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118005Jy sigma=0.001307 ! Fit after self-cal, rms=0.118005Jy sigma=0.001307 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.135 mas, bmaj=7.353 mas, bpa=-7.348 degrees ! Estimated noise=1266.48 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (49, -38). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0410731 Jy ! Component: 100 - total flux cleaned = 0.0621235 Jy ! Component: 150 - total flux cleaned = 0.0758454 Jy ! Component: 200 - total flux cleaned = 0.0819483 Jy ! Total flux subtracted in 200 components = 0.0819483 Jy ! Clean residual min=-0.013795 max=0.025126 Jy/beam ! Clean residual mean=0.000019 rms=0.004383 Jy/beam ! Combined flux in latest and established models = 0.500528 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 47 components and 0.500528 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101515Jy sigma=0.001115 ! Fit after self-cal, rms=0.100387Jy sigma=0.001101 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00* HN 0.92 KP 1.07 ! LA 1.08 MK 1.01 NL 0.98 OV 0.96 ! PT 1.02 SC 1.04 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00* HN 1.01 KP 0.99 ! LA 1.02 MK 1.01 NL 1.25 OV 0.99 ! PT 1.02 SC 1.08 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.00* HN 1.02 KP 0.86 ! LA 0.84 MK 1.04 NL 1.40 OV 0.94 ! PT 1.00 SC 1.06 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.00* HN 0.95 KP 0.79 ! LA 0.89 MK 1.03 NL 0.86 OV 0.98 ! PT 1.03 SC 0.98 ! ! ! Fit before self-cal, rms=0.100387Jy sigma=0.001101 ! Fit after self-cal, rms=0.075475Jy sigma=0.000824 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.167 mas, bmaj=7.424 mas, bpa=-7.393 degrees ! Estimated noise=1268.81 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00551933 Jy ! Component: 100 - total flux cleaned = -0.00750251 Jy ! Component: 150 - total flux cleaned = -0.00882056 Jy ! Component: 200 - total flux cleaned = -0.00966593 Jy ! Total flux subtracted in 200 components = -0.00966593 Jy ! Clean residual min=-0.006573 max=0.006364 Jy/beam ! Clean residual mean=0.000002 rms=0.001676 Jy/beam ! Combined flux in latest and established models = 0.490862 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 74 components and 0.490862 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074583Jy sigma=0.000814 ! Fit after self-cal, rms=0.074549Jy sigma=0.000813 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074549Jy sigma=0.000813 ! Fit after self-cal, rms=0.074303Jy sigma=0.000810 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.168 mas, bmaj=7.428 mas, bpa=-7.372 degrees ! Estimated noise=1267.77 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00383103 Jy ! Component: 100 - total flux cleaned = -0.00460608 Jy ! Component: 150 - total flux cleaned = -0.00497156 Jy ! Component: 200 - total flux cleaned = -0.00528524 Jy ! Total flux subtracted in 200 components = -0.00528524 Jy ! Clean residual min=-0.006084 max=0.005943 Jy/beam ! Clean residual mean=0.000001 rms=0.001453 Jy/beam ! Combined flux in latest and established models = 0.485576 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 83 components and 0.485576 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073926Jy sigma=0.000806 ! Fit after self-cal, rms=0.073912Jy sigma=0.000806 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000469819 Jy ! Component: 100 - total flux cleaned = -0.000593006 Jy ! Component: 150 - total flux cleaned = -0.000704951 Jy ! Component: 200 - total flux cleaned = -0.000706027 Jy ! Total flux subtracted in 200 components = -0.000706027 Jy ! Clean residual min=-0.005958 max=0.005679 Jy/beam ! Clean residual mean=0.000002 rms=0.001421 Jy/beam ! Combined flux in latest and established models = 0.48487 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 98 components and 0.48487 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073818Jy sigma=0.000805 ! Fit after self-cal, rms=0.073818Jy sigma=0.000805 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073818Jy sigma=0.000805 ! Fit after self-cal, rms=0.073670Jy sigma=0.000803 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.168 mas, bmaj=7.43 mas, bpa=-7.361 degrees ! Estimated noise=1267.22 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00287765 Jy ! Component: 100 - total flux cleaned = -0.00325252 Jy ! Component: 150 - total flux cleaned = -0.00331897 Jy ! Component: 200 - total flux cleaned = -0.00326206 Jy ! Total flux subtracted in 200 components = -0.00326206 Jy ! Clean residual min=-0.005587 max=0.005495 Jy/beam ! Clean residual mean=0.000001 rms=0.001290 Jy/beam ! Combined flux in latest and established models = 0.481608 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 103 components and 0.481608 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073486Jy sigma=0.000801 ! Fit after self-cal, rms=0.073477Jy sigma=0.000801 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000274734 Jy ! Component: 100 - total flux cleaned = -0.000276166 Jy ! Component: 150 - total flux cleaned = -0.000278419 Jy ! Component: 200 - total flux cleaned = -0.000322389 Jy ! Total flux subtracted in 200 components = -0.000322389 Jy ! Clean residual min=-0.005483 max=0.005295 Jy/beam ! Clean residual mean=0.000001 rms=0.001270 Jy/beam ! Combined flux in latest and established models = 0.481286 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 109 components and 0.481286 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073418Jy sigma=0.000800 ! Fit after self-cal, rms=0.073416Jy sigma=0.000800 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073416Jy sigma=0.000800 ! Fit after self-cal, rms=0.073330Jy sigma=0.000799 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.164 mas, bmaj=11.66 mas, bpa=1.054 degrees ! Estimated noise=1589.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00181683 Jy ! Component: 100 - total flux cleaned = -0.00209261 Jy ! Component: 150 - total flux cleaned = -0.00215923 Jy ! Component: 200 - total flux cleaned = -0.002154 Jy ! Total flux subtracted in 200 components = -0.002154 Jy ! Clean residual min=-0.006402 max=0.005150 Jy/beam ! Clean residual mean=0.000001 rms=0.001618 Jy/beam ! Combined flux in latest and established models = 0.479132 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 121 components and 0.479132 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073269Jy sigma=0.000798 ! Fit after self-cal, rms=0.073235Jy sigma=0.000798 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.40101e-05 Jy ! Component: 100 - total flux cleaned = 1.52345e-05 Jy ! Component: 150 - total flux cleaned = 6.14839e-05 Jy ! Component: 200 - total flux cleaned = 0.000144576 Jy ! Total flux subtracted in 200 components = 0.000144576 Jy ! Clean residual min=-0.006166 max=0.005103 Jy/beam ! Clean residual mean=0.000001 rms=0.001585 Jy/beam ! Combined flux in latest and established models = 0.479276 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 127 components and 0.479276 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073241Jy sigma=0.000798 ! Fit after self-cal, rms=0.073226Jy sigma=0.000798 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.168 mas, bmaj=7.43 mas, bpa=-7.354 degrees ! Estimated noise=1266.31 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.168 x 7.43 at -7.354 degrees (North through East) ! Clean map min=-0.0047432 max=0.42996 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.687 mas, bmaj=6.821 mas, bpa=-7.667 degrees ! Estimated noise=1463.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.34177 Jy ! Component: 100 - total flux cleaned = 0.416609 Jy ! Component: 150 - total flux cleaned = 0.441489 Jy ! Component: 200 - total flux cleaned = 0.455128 Jy ! Total flux subtracted in 200 components = 0.455128 Jy ! Clean residual min=-0.007294 max=0.008199 Jy/beam ! Clean residual mean=0.000007 rms=0.001805 Jy/beam ! Combined flux in latest and established models = 0.455128 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.455128 Jy ! Inverting map and beam ! Estimated beam: bmin=3.168 mas, bmaj=7.43 mas, bpa=-7.354 degrees ! Estimated noise=1266.31 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-25, 20). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0106572 Jy ! Component: 100 - total flux cleaned = 0.0166604 Jy ! Component: 150 - total flux cleaned = 0.0205254 Jy ! Component: 200 - total flux cleaned = 0.0218105 Jy ! Total flux subtracted in 200 components = 0.0218105 Jy ! Clean residual min=-0.005294 max=0.004929 Jy/beam ! Clean residual mean=0.000001 rms=0.001221 Jy/beam ! Combined flux in latest and established models = 0.476938 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 64 components and 0.476938 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.164 mas, bmaj=11.66 mas, bpa=1.054 degrees ! Estimated noise=1589.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0014933 Jy ! Component: 100 - total flux cleaned = 0.00182562 Jy ! Component: 150 - total flux cleaned = 0.00198352 Jy ! Component: 200 - total flux cleaned = 0.00204805 Jy ! Total flux subtracted in 200 components = 0.00204805 Jy ! Clean residual min=-0.004995 max=0.004231 Jy/beam ! Clean residual mean=-0.000000 rms=0.001400 Jy/beam ! Combined flux in latest and established models = 0.478987 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000172546 Jy ! Component: 100 - total flux cleaned = 0.000273917 Jy ! Component: 150 - total flux cleaned = 0.000365466 Jy ! Component: 200 - total flux cleaned = 0.000487757 Jy ! Total flux subtracted in 200 components = 0.000487757 Jy ! Clean residual min=-0.004839 max=0.004219 Jy/beam ! Clean residual mean=-0.000001 rms=0.001339 Jy/beam ! Combined flux in latest and established models = 0.479474 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 114 components and 0.479474 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.168 mas, bmaj=7.43 mas, bpa=-7.354 degrees ! Estimated noise=1266.31 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000128408 Jy ! Component: 100 - total flux cleaned = 0.000203614 Jy ! Component: 150 - total flux cleaned = 0.000128136 Jy ! Component: 200 - total flux cleaned = 0.000256685 Jy ! Total flux subtracted in 200 components = 0.000256685 Jy ! Clean residual min=-0.004773 max=0.004380 Jy/beam ! Clean residual mean=0.000000 rms=0.001069 Jy/beam ! Combined flux in latest and established models = 0.479731 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 135 components and 0.479731 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072994Jy sigma=0.000795 ! Fit after self-cal, rms=0.072905Jy sigma=0.000794 wmodel J1505+0326_S_2015_01_22_pus_map.mod ! Writing 135 model components to file: J1505+0326_S_2015_01_22_pus_map.mod wobs J1505+0326_S_2015_01_22_pus_uvs.fits ! Writing UV FITS file: J1505+0326_S_2015_01_22_pus_uvs.fits wwins J1505+0326_S_2015_01_22_pus_map.win ! wwins: Wrote 3 windows to J1505+0326_S_2015_01_22_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00103909 Jy ! Component: 100 - total flux cleaned = -0.000497401 Jy ! Component: 150 - total flux cleaned = 0.000454403 Jy ! Component: 200 - total flux cleaned = 0.00134595 Jy ! Component: 250 - total flux cleaned = 0.00196108 Jy ! Component: 300 - total flux cleaned = 0.00238459 Jy ! Component: 350 - total flux cleaned = 0.00268753 Jy ! Component: 400 - total flux cleaned = 0.00297555 Jy ! Component: 450 - total flux cleaned = 0.00306689 Jy ! Component: 500 - total flux cleaned = 0.0032447 Jy ! Component: 550 - total flux cleaned = 0.00337309 Jy ! Component: 600 - total flux cleaned = 0.00345508 Jy ! Component: 650 - total flux cleaned = 0.00349467 Jy ! Component: 700 - total flux cleaned = 0.00345671 Jy ! Component: 750 - total flux cleaned = 0.00345803 Jy ! Component: 800 - total flux cleaned = 0.00356613 Jy ! Component: 850 - total flux cleaned = 0.00377545 Jy ! Component: 900 - total flux cleaned = 0.00397765 Jy ! Component: 950 - total flux cleaned = 0.00404296 Jy ! Component: 1000 - total flux cleaned = 0.00407483 Jy ! Component: 1050 - total flux cleaned = 0.00410618 Jy ! Component: 1100 - total flux cleaned = 0.00410574 Jy ! Component: 1150 - total flux cleaned = 0.00404603 Jy ! Component: 1200 - total flux cleaned = 0.00398704 Jy ! Component: 1250 - total flux cleaned = 0.00401581 Jy ! Component: 1300 - total flux cleaned = 0.0039597 Jy ! Component: 1350 - total flux cleaned = 0.00401417 Jy ! Component: 1400 - total flux cleaned = 0.00390599 Jy ! Component: 1450 - total flux cleaned = 0.0039059 Jy ! Component: 1500 - total flux cleaned = 0.00388011 Jy ! Component: 1550 - total flux cleaned = 0.00393122 Jy ! Component: 1600 - total flux cleaned = 0.00393109 Jy ! Component: 1650 - total flux cleaned = 0.00390673 Jy ! Component: 1700 - total flux cleaned = 0.0039308 Jy ! Component: 1750 - total flux cleaned = 0.00385977 Jy ! Component: 1800 - total flux cleaned = 0.00392981 Jy ! Component: 1850 - total flux cleaned = 0.0039525 Jy ! Component: 1900 - total flux cleaned = 0.0040879 Jy ! Component: 1950 - total flux cleaned = 0.00408768 Jy ! Component: 2000 - total flux cleaned = 0.00419727 Jy ! Component: 2050 - total flux cleaned = 0.00426235 Jy ! Component: 2100 - total flux cleaned = 0.00424108 Jy ! Component: 2150 - total flux cleaned = 0.00432539 Jy ! Component: 2200 - total flux cleaned = 0.00444965 Jy ! Component: 2250 - total flux cleaned = 0.0044498 Jy ! Component: 2300 - total flux cleaned = 0.00442983 Jy ! Component: 2350 - total flux cleaned = 0.00440996 Jy ! Component: 2400 - total flux cleaned = 0.00444929 Jy ! Component: 2450 - total flux cleaned = 0.00448822 Jy ! Component: 2500 - total flux cleaned = 0.00443042 Jy ! Component: 2550 - total flux cleaned = 0.00444947 Jy ! Component: 2600 - total flux cleaned = 0.0044683 Jy ! Component: 2650 - total flux cleaned = 0.00446808 Jy ! Component: 2700 - total flux cleaned = 0.0044495 Jy ! Component: 2750 - total flux cleaned = 0.00450433 Jy ! Component: 2800 - total flux cleaned = 0.00450456 Jy ! Component: 2850 - total flux cleaned = 0.00446881 Jy ! Component: 2900 - total flux cleaned = 0.00450453 Jy ! Component: 2950 - total flux cleaned = 0.00446922 Jy ! Component: 3000 - total flux cleaned = 0.00450408 Jy ! Component: 3050 - total flux cleaned = 0.00445232 Jy ! Component: 3100 - total flux cleaned = 0.00446954 Jy ! Component: 3150 - total flux cleaned = 0.00443549 Jy ! Component: 3200 - total flux cleaned = 0.00441854 Jy ! Component: 3250 - total flux cleaned = 0.004402 Jy ! Component: 3300 - total flux cleaned = 0.00446832 Jy ! Component: 3350 - total flux cleaned = 0.00450094 Jy ! Component: 3400 - total flux cleaned = 0.0045332 Jy ! Component: 3450 - total flux cleaned = 0.00454919 Jy ! Component: 3500 - total flux cleaned = 0.00456522 Jy ! Component: 3550 - total flux cleaned = 0.00461298 Jy ! Component: 3600 - total flux cleaned = 0.00466039 Jy ! Component: 3650 - total flux cleaned = 0.00464475 Jy ! Component: 3700 - total flux cleaned = 0.00472227 Jy ! Component: 3750 - total flux cleaned = 0.0047223 Jy ! Component: 3800 - total flux cleaned = 0.004753 Jy ! Component: 3850 - total flux cleaned = 0.00476823 Jy ! Component: 3900 - total flux cleaned = 0.0048137 Jy ! Component: 3950 - total flux cleaned = 0.00485876 Jy ! Component: 4000 - total flux cleaned = 0.00493308 Jy ! Component: 4050 - total flux cleaned = 0.00494783 Jy ! Total flux subtracted in 4096 components = 0.00496251 Jy ! Clean residual min=-0.001187 max=0.000734 Jy/beam ! Clean residual mean=0.000000 rms=0.000259 Jy/beam ! Combined flux in latest and established models = 0.484694 Jy keep ! Adding 275 model components to the UV plane model. ! The established model now contains 410 components and 0.484694 Jy ![Exited script file: muppet] wmap "J1505+0326_S_2015_01_22_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.168 x 7.43 at -7.354 degrees (North through East) ! Clean map min=-0.0031427 max=0.43057 Jy/beam ! Writing clean map to FITS file: J1505+0326_S_2015_01_22_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.430568 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000255386 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.177941 0.177941 0.355882 0.711764 1.42353 2.84706 5.69411 11.3882 22.7764 45.5529 91.1058 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.43 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.168 x 7.43 at -7.354 degrees (North through East) ! Clean map min=-0.0031427 max=0.43057 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1505+0326_S_2015_01_22_pus_uvs.log closed on Tue Jan 3 22:57:03 2017