! Started logfile: J1459-3655_S_2015_01_23_pus_uvs.log on Mon Jan 2 19:28:02 2017 obs J1459-3655_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J1459-3655_S_2015_01_23_pus_uva.fits ! AN table 1: 89 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.82397 visibilities/baseline/integration-bin. ! Found source: J1459-3655 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 13200 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1459-3655_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 84 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 84 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 84 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 84 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.900862Jy sigma=0.004852 ! Fit after self-cal, rms=0.813252Jy sigma=0.004309 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.377 mas, bmaj=7.903 mas, bpa=-1.541 degrees ! Estimated noise=1664.09 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.255389 Jy ! Component: 100 - total flux cleaned = 0.369656 Jy ! Total flux subtracted in 100 components = 0.369656 Jy ! Clean residual min=-0.029548 max=0.086338 Jy/beam ! Clean residual mean=-0.000348 rms=0.010364 Jy/beam ! Combined flux in latest and established models = 0.369656 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.369656 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.574157Jy sigma=0.001688 ! Fit after self-cal, rms=0.573866Jy sigma=0.001686 ! Inverting map ! Added new window around map position (-3.5, 4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.086047 Jy ! Component: 100 - total flux cleaned = 0.14145 Jy ! Total flux subtracted in 100 components = 0.14145 Jy ! Clean residual min=-0.022505 max=0.059502 Jy/beam ! Clean residual mean=-0.000224 rms=0.006895 Jy/beam ! Combined flux in latest and established models = 0.511106 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 65 components and 0.511106 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.546163Jy sigma=0.001276 ! Fit after self-cal, rms=0.544987Jy sigma=0.001262 ! Inverting map ! Added new window around map position (4, -6.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0514282 Jy ! Component: 100 - total flux cleaned = 0.0871057 Jy ! Total flux subtracted in 100 components = 0.0871057 Jy ! Clean residual min=-0.019545 max=0.024050 Jy/beam ! Clean residual mean=-0.000144 rms=0.004920 Jy/beam ! Combined flux in latest and established models = 0.598211 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 97 components and 0.598211 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.533934Jy sigma=0.001077 ! Fit after self-cal, rms=0.534070Jy sigma=0.001077 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.964 mas, bmaj=9.037 mas, bpa=-2.188 degrees ! Estimated noise=1013.25 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0511624 Jy ! Component: 100 - total flux cleaned = 0.0847501 Jy ! Component: 150 - total flux cleaned = 0.10784 Jy ! Component: 200 - total flux cleaned = 0.123877 Jy ! Total flux subtracted in 200 components = 0.123877 Jy ! Clean residual min=-0.021241 max=0.017753 Jy/beam ! Clean residual mean=-0.000070 rms=0.005087 Jy/beam ! Combined flux in latest and established models = 0.722088 Jy ! Performing phase self-cal ! Adding 88 model components to the UV plane model. ! The established model now contains 168 components and 0.722088 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.524876Jy sigma=0.000948 ! Fit after self-cal, rms=0.524972Jy sigma=0.000947 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.02 HN 1.10 KP 1.04 ! LA 1.03 MK 0.99 NL 1.06 OV 0.95 ! PT 1.03 SC 1.06 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.01 HN 1.20 KP 0.98 ! LA 1.00 MK 1.00 NL 1.16 OV 0.97 ! PT 1.02 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.28 HN 1.17 KP 0.85 ! LA 0.83 MK 1.05 NL 1.17 OV 0.90 ! PT 1.02 SC 1.04 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.13 HN 1.15 KP 0.81 ! LA 0.87 MK 1.05 NL 1.09 OV 0.95 ! PT 1.06 SC 0.96 ! ! ! Fit before self-cal, rms=0.524972Jy sigma=0.000947 ! Fit after self-cal, rms=0.605742Jy sigma=0.000852 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.992 mas, bmaj=9.071 mas, bpa=-2.006 degrees ! Estimated noise=1034.27 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000100779 Jy ! Component: 100 - total flux cleaned = -0.00148903 Jy ! Component: 150 - total flux cleaned = -0.00240494 Jy ! Component: 200 - total flux cleaned = -0.00286547 Jy ! Total flux subtracted in 200 components = -0.00286547 Jy ! Clean residual min=-0.013052 max=0.014893 Jy/beam ! Clean residual mean=-0.000017 rms=0.003706 Jy/beam ! Combined flux in latest and established models = 0.719222 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 185 components and 0.719222 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.605396Jy sigma=0.000848 ! Fit after self-cal, rms=0.605595Jy sigma=0.000848 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.605595Jy sigma=0.000848 ! Fit after self-cal, rms=0.616158Jy sigma=0.000847 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.993 mas, bmaj=9.058 mas, bpa=-1.836 degrees ! Estimated noise=1044.54 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00120946 Jy ! Component: 100 - total flux cleaned = 0.000325 Jy ! Component: 150 - total flux cleaned = -0.000268318 Jy ! Component: 200 - total flux cleaned = -0.000644827 Jy ! Total flux subtracted in 200 components = -0.000644827 Jy ! Clean residual min=-0.012518 max=0.014754 Jy/beam ! Clean residual mean=-0.000020 rms=0.003673 Jy/beam ! Combined flux in latest and established models = 0.718577 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 189 components and 0.718577 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.615848Jy sigma=0.000845 ! Fit after self-cal, rms=0.615873Jy sigma=0.000845 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.31355e-05 Jy ! Component: 100 - total flux cleaned = -0.000322574 Jy ! Component: 150 - total flux cleaned = -0.000482981 Jy ! Component: 200 - total flux cleaned = -0.000554338 Jy ! Total flux subtracted in 200 components = -0.000554338 Jy ! Clean residual min=-0.012538 max=0.014657 Jy/beam ! Clean residual mean=-0.000022 rms=0.003661 Jy/beam ! Combined flux in latest and established models = 0.718023 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 198 components and 0.718023 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.615746Jy sigma=0.000844 ! Fit after self-cal, rms=0.615749Jy sigma=0.000844 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.615749Jy sigma=0.000844 ! Fit after self-cal, rms=0.731207Jy sigma=0.000835 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.994 mas, bmaj=9.036 mas, bpa=-1.776 degrees ! Estimated noise=1063.48 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00256225 Jy ! Component: 100 - total flux cleaned = 0.00182589 Jy ! Component: 150 - total flux cleaned = 0.00103667 Jy ! Component: 200 - total flux cleaned = 0.000767441 Jy ! Total flux subtracted in 200 components = 0.000767441 Jy ! Clean residual min=-0.011912 max=0.012931 Jy/beam ! Clean residual mean=-0.000018 rms=0.003373 Jy/beam ! Combined flux in latest and established models = 0.718791 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 204 components and 0.718791 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.730815Jy sigma=0.000833 ! Fit after self-cal, rms=0.730931Jy sigma=0.000833 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000594707 Jy ! Component: 100 - total flux cleaned = 2.40485e-05 Jy ! Component: 150 - total flux cleaned = -0.000469971 Jy ! Component: 200 - total flux cleaned = -0.000646916 Jy ! Total flux subtracted in 200 components = -0.000646916 Jy ! Clean residual min=-0.011745 max=0.012994 Jy/beam ! Clean residual mean=-0.000021 rms=0.003355 Jy/beam ! Combined flux in latest and established models = 0.718144 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 213 components and 0.718144 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.730783Jy sigma=0.000832 ! Fit after self-cal, rms=0.730795Jy sigma=0.000832 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.730795Jy sigma=0.000832 ! Fit after self-cal, rms=0.761875Jy sigma=0.000832 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.782 mas, bmaj=23.51 mas, bpa=-1.797 degrees ! Estimated noise=1401.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00358126 Jy ! Component: 100 - total flux cleaned = 0.00317363 Jy ! Component: 150 - total flux cleaned = 0.00280921 Jy ! Component: 200 - total flux cleaned = 0.00258715 Jy ! Total flux subtracted in 200 components = 0.00258715 Jy ! Clean residual min=-0.019218 max=0.023634 Jy/beam ! Clean residual mean=-0.000050 rms=0.006205 Jy/beam ! Combined flux in latest and established models = 0.720731 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 219 components and 0.720731 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.761451Jy sigma=0.000832 ! Fit after self-cal, rms=0.761557Jy sigma=0.000831 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.17153e-05 Jy ! Component: 100 - total flux cleaned = -3.95078e-05 Jy ! Component: 150 - total flux cleaned = -4.13888e-05 Jy ! Component: 200 - total flux cleaned = -4.0146e-05 Jy ! Total flux subtracted in 200 components = -4.0146e-05 Jy ! Clean residual min=-0.019300 max=0.023872 Jy/beam ! Clean residual mean=-0.000050 rms=0.006192 Jy/beam ! Combined flux in latest and established models = 0.72069 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 224 components and 0.720691 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.761446Jy sigma=0.000831 ! Fit after self-cal, rms=0.761486Jy sigma=0.000831 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.99 mas, bmaj=9.014 mas, bpa=-1.807 degrees ! Estimated noise=1075.03 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.99 x 9.014 at -1.807 degrees (North through East) ! Clean map min=-0.011385 max=0.3444 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.379 mas, bmaj=7.83 mas, bpa=-0.8527 degrees ! Estimated noise=1794.84 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.275433 Jy ! Component: 100 - total flux cleaned = 0.402522 Jy ! Component: 150 - total flux cleaned = 0.485613 Jy ! Component: 200 - total flux cleaned = 0.541696 Jy ! Total flux subtracted in 200 components = 0.541696 Jy ! Clean residual min=-0.015816 max=0.030892 Jy/beam ! Clean residual mean=-0.000192 rms=0.005258 Jy/beam ! Combined flux in latest and established models = 0.541696 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 64 model components to the UV plane model. ! The established model now contains 64 components and 0.541696 Jy ! Inverting map and beam ! Estimated beam: bmin=2.99 mas, bmaj=9.014 mas, bpa=-1.807 degrees ! Estimated noise=1075.03 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0665339 Jy ! Component: 100 - total flux cleaned = 0.105458 Jy ! Component: 150 - total flux cleaned = 0.129621 Jy ! Component: 200 - total flux cleaned = 0.145408 Jy ! Total flux subtracted in 200 components = 0.145408 Jy ! Clean residual min=-0.011863 max=0.012363 Jy/beam ! Clean residual mean=-0.000094 rms=0.003534 Jy/beam ! Combined flux in latest and established models = 0.687105 Jy ! Adding 104 model components to the UV plane model. ! The established model now contains 151 components and 0.687105 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.782 mas, bmaj=23.51 mas, bpa=-1.797 degrees ! Estimated noise=1401.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0186901 Jy ! Component: 100 - total flux cleaned = 0.0275031 Jy ! Component: 150 - total flux cleaned = 0.0317389 Jy ! Component: 200 - total flux cleaned = 0.0329076 Jy ! Total flux subtracted in 200 components = 0.0329076 Jy ! Clean residual min=-0.019256 max=0.024566 Jy/beam ! Clean residual mean=-0.000053 rms=0.006139 Jy/beam ! Combined flux in latest and established models = 0.720012 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00022949 Jy ! Component: 100 - total flux cleaned = 0.00050087 Jy ! Component: 150 - total flux cleaned = 0.000679359 Jy ! Component: 200 - total flux cleaned = 0.00079121 Jy ! Total flux subtracted in 200 components = 0.00079121 Jy ! Clean residual min=-0.019244 max=0.024606 Jy/beam ! Clean residual mean=-0.000049 rms=0.006148 Jy/beam ! Combined flux in latest and established models = 0.720803 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 172 components and 0.720803 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.99 mas, bmaj=9.014 mas, bpa=-1.807 degrees ! Estimated noise=1075.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00320845 Jy ! Component: 100 - total flux cleaned = -0.00387198 Jy ! Component: 150 - total flux cleaned = -0.00387373 Jy ! Component: 200 - total flux cleaned = -0.00396726 Jy ! Total flux subtracted in 200 components = -0.00396726 Jy ! Clean residual min=-0.011515 max=0.013628 Jy/beam ! Clean residual mean=-0.000032 rms=0.003307 Jy/beam ! Combined flux in latest and established models = 0.716836 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 177 components and 0.716836 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.761338Jy sigma=0.000831 ! Fit after self-cal, rms=0.761331Jy sigma=0.000831 wmodel J1459-3655_S_2015_01_23_pus_map.mod ! Writing 177 model components to file: J1459-3655_S_2015_01_23_pus_map.mod wobs J1459-3655_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J1459-3655_S_2015_01_23_pus_uvs.fits wwins J1459-3655_S_2015_01_23_pus_map.win ! wwins: Wrote 3 windows to J1459-3655_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00452162 Jy ! Component: 100 - total flux cleaned = 0.00689531 Jy ! Component: 150 - total flux cleaned = 0.00798239 Jy ! Component: 200 - total flux cleaned = 0.00916582 Jy ! Component: 250 - total flux cleaned = 0.00948503 Jy ! Component: 300 - total flux cleaned = 0.00979309 Jy ! Component: 350 - total flux cleaned = 0.0102339 Jy ! Component: 400 - total flux cleaned = 0.0109344 Jy ! Component: 450 - total flux cleaned = 0.0113361 Jy ! Component: 500 - total flux cleaned = 0.0115951 Jy ! Component: 550 - total flux cleaned = 0.011468 Jy ! Component: 600 - total flux cleaned = 0.0115916 Jy ! Component: 650 - total flux cleaned = 0.0115898 Jy ! Component: 700 - total flux cleaned = 0.0114731 Jy ! Component: 750 - total flux cleaned = 0.0113606 Jy ! Component: 800 - total flux cleaned = 0.0113616 Jy ! Component: 850 - total flux cleaned = 0.0114667 Jy ! Component: 900 - total flux cleaned = 0.0112586 Jy ! Component: 950 - total flux cleaned = 0.0114657 Jy ! Component: 1000 - total flux cleaned = 0.0114666 Jy ! Component: 1050 - total flux cleaned = 0.011758 Jy ! Component: 1100 - total flux cleaned = 0.0117558 Jy ! Component: 1150 - total flux cleaned = 0.0118475 Jy ! Component: 1200 - total flux cleaned = 0.0116625 Jy ! Component: 1250 - total flux cleaned = 0.0114828 Jy ! Component: 1300 - total flux cleaned = 0.0109516 Jy ! Component: 1350 - total flux cleaned = 0.01078 Jy ! Component: 1400 - total flux cleaned = 0.0107792 Jy ! Component: 1450 - total flux cleaned = 0.0106108 Jy ! Component: 1500 - total flux cleaned = 0.01061 Jy ! Component: 1550 - total flux cleaned = 0.0102022 Jy ! Component: 1600 - total flux cleaned = 0.0103639 Jy ! Component: 1650 - total flux cleaned = 0.0102838 Jy ! Component: 1700 - total flux cleaned = 0.0101274 Jy ! Component: 1750 - total flux cleaned = 0.0100491 Jy ! Component: 1800 - total flux cleaned = 0.00982208 Jy ! Component: 1850 - total flux cleaned = 0.0101207 Jy ! Component: 1900 - total flux cleaned = 0.00982559 Jy ! Component: 1950 - total flux cleaned = 0.00989933 Jy ! Component: 2000 - total flux cleaned = 0.0098999 Jy ! Component: 2050 - total flux cleaned = 0.0100416 Jy ! Component: 2100 - total flux cleaned = 0.0101099 Jy ! Component: 2150 - total flux cleaned = 0.00997085 Jy ! Component: 2200 - total flux cleaned = 0.00997013 Jy ! Component: 2250 - total flux cleaned = 0.0100374 Jy ! Component: 2300 - total flux cleaned = 0.00977133 Jy ! Component: 2350 - total flux cleaned = 0.00996863 Jy ! Component: 2400 - total flux cleaned = 0.00996682 Jy ! Component: 2450 - total flux cleaned = 0.00964344 Jy ! Component: 2500 - total flux cleaned = 0.00945241 Jy ! Component: 2550 - total flux cleaned = 0.00951558 Jy ! Component: 2600 - total flux cleaned = 0.00932767 Jy ! Component: 2650 - total flux cleaned = 0.00926611 Jy ! Component: 2700 - total flux cleaned = 0.00926618 Jy ! Component: 2750 - total flux cleaned = 0.00932661 Jy ! Component: 2800 - total flux cleaned = 0.00920654 Jy ! Component: 2850 - total flux cleaned = 0.0091482 Jy ! Component: 2900 - total flux cleaned = 0.00920694 Jy ! Component: 2950 - total flux cleaned = 0.00920602 Jy ! Component: 3000 - total flux cleaned = 0.00909086 Jy ! Component: 3050 - total flux cleaned = 0.00920509 Jy ! Component: 3100 - total flux cleaned = 0.00914845 Jy ! Component: 3150 - total flux cleaned = 0.00920513 Jy ! Component: 3200 - total flux cleaned = 0.0092048 Jy ! Component: 3250 - total flux cleaned = 0.00914944 Jy ! Component: 3300 - total flux cleaned = 0.00925848 Jy ! Component: 3350 - total flux cleaned = 0.00925817 Jy ! Component: 3400 - total flux cleaned = 0.00920386 Jy ! Component: 3450 - total flux cleaned = 0.00915047 Jy ! Component: 3500 - total flux cleaned = 0.00946979 Jy ! Component: 3550 - total flux cleaned = 0.00941672 Jy ! Component: 3600 - total flux cleaned = 0.00946931 Jy ! Component: 3650 - total flux cleaned = 0.00952115 Jy ! Component: 3700 - total flux cleaned = 0.00967635 Jy ! Component: 3750 - total flux cleaned = 0.00957393 Jy ! Component: 3800 - total flux cleaned = 0.00972708 Jy ! Component: 3850 - total flux cleaned = 0.00977745 Jy ! Component: 3900 - total flux cleaned = 0.00982759 Jy ! Component: 3950 - total flux cleaned = 0.00977781 Jy ! Component: 4000 - total flux cleaned = 0.00977799 Jy ! Component: 4050 - total flux cleaned = 0.00987725 Jy ! Total flux subtracted in 4096 components = 0.0097302 Jy ! Clean residual min=-0.002911 max=0.002847 Jy/beam ! Clean residual mean=0.000004 rms=0.001051 Jy/beam ! Combined flux in latest and established models = 0.726566 Jy keep ! Adding 578 model components to the UV plane model. ! The established model now contains 755 components and 0.726568 Jy ![Exited script file: muppet] wmap "J1459-3655_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.99 x 9.014 at -1.807 degrees (North through East) ! Clean map min=-0.0077265 max=0.35414 Jy/beam ! Writing clean map to FITS file: J1459-3655_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.354139 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00105264 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.891719 0.891719 1.78344 3.56688 7.13375 14.2675 28.535 57.07 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0031 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.354 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.99 x 9.014 at -1.807 degrees (North through East) ! Clean map min=-0.0077265 max=0.35414 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1459-3655_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 19:28:07 2017