! Started logfile: J1458+3720_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:30:33 2017 obs J1458+3720_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J1458+3720_S_2014_01_04_pus_uva.fits ! AN table 1: 76 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.680556 visibilities/baseline/integration-bin. ! Found source: J1458+3720 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 7448 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1458+3720_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 114 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 114 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 114 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 114 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.888404Jy sigma=0.012279 ! Fit after self-cal, rms=0.882929Jy sigma=0.012192 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.803 mas, bmaj=4.105 mas, bpa=39.55 degrees ! Estimated noise=882.32 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0912407 Jy ! Component: 100 - total flux cleaned = 0.111895 Jy ! Total flux subtracted in 100 components = 0.111895 Jy ! Clean residual min=-0.004385 max=0.007068 Jy/beam ! Clean residual mean=-0.000000 rms=0.001237 Jy/beam ! Combined flux in latest and established models = 0.111895 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.111895 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076543Jy sigma=0.000891 ! Fit after self-cal, rms=0.076517Jy sigma=0.000891 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.652 mas, bmaj=4.781 mas, bpa=20.67 degrees ! Estimated noise=637.535 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00834114 Jy ! Component: 100 - total flux cleaned = 0.0124736 Jy ! Component: 150 - total flux cleaned = 0.0149758 Jy ! Component: 200 - total flux cleaned = 0.0165402 Jy ! Total flux subtracted in 200 components = 0.0165402 Jy ! Clean residual min=-0.003637 max=0.003304 Jy/beam ! Clean residual mean=0.000001 rms=0.000844 Jy/beam ! Combined flux in latest and established models = 0.128435 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 20 components and 0.128435 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075461Jy sigma=0.000880 ! Fit after self-cal, rms=0.075402Jy sigma=0.000880 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.84 KP 1.00* LA 1.04 ! MK 0.94 NL 0.98 OV 0.96 PT 1.03 ! SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.02 KP 1.00* LA 0.99 ! MK 1.00 NL 1.05 OV 1.02 PT 1.00 ! SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.15 KP 1.00* LA 0.81 ! MK 1.02 NL 1.01 OV 0.91 PT 0.95 ! SC 1.04 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.06 KP 1.00* LA 0.90 ! MK 1.04 NL 1.11 OV 0.99 PT 1.01 ! SC 0.96 ! ! ! Fit before self-cal, rms=0.075402Jy sigma=0.000880 ! Fit after self-cal, rms=0.072702Jy sigma=0.000864 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.639 mas, bmaj=4.803 mas, bpa=20.21 degrees ! Estimated noise=636.833 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.73448e-05 Jy ! Component: 100 - total flux cleaned = -0.000391583 Jy ! Component: 150 - total flux cleaned = -0.000547492 Jy ! Component: 200 - total flux cleaned = -0.000687085 Jy ! Total flux subtracted in 200 components = -0.000687085 Jy ! Clean residual min=-0.001983 max=0.001982 Jy/beam ! Clean residual mean=-0.000001 rms=0.000547 Jy/beam ! Combined flux in latest and established models = 0.127748 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 31 components and 0.127748 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072660Jy sigma=0.000863 ! Fit after self-cal, rms=0.072467Jy sigma=0.000863 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072467Jy sigma=0.000863 ! Fit after self-cal, rms=0.072057Jy sigma=0.000862 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.638 mas, bmaj=4.793 mas, bpa=17.35 degrees ! Estimated noise=635.185 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000275743 Jy ! Component: 100 - total flux cleaned = -0.000504871 Jy ! Component: 150 - total flux cleaned = -0.000594017 Jy ! Component: 200 - total flux cleaned = -0.000678685 Jy ! Total flux subtracted in 200 components = -0.000678685 Jy ! Clean residual min=-0.001960 max=0.001909 Jy/beam ! Clean residual mean=0.000005 rms=0.000510 Jy/beam ! Combined flux in latest and established models = 0.127069 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 35 components and 0.127069 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072031Jy sigma=0.000862 ! Fit after self-cal, rms=0.072011Jy sigma=0.000862 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000111771 Jy ! Component: 100 - total flux cleaned = -0.000169325 Jy ! Component: 150 - total flux cleaned = -0.000237781 Jy ! Component: 200 - total flux cleaned = -0.000287287 Jy ! Total flux subtracted in 200 components = -0.000287287 Jy ! Clean residual min=-0.001996 max=0.001890 Jy/beam ! Clean residual mean=0.000005 rms=0.000506 Jy/beam ! Combined flux in latest and established models = 0.126782 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 36 components and 0.126782 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071998Jy sigma=0.000862 ! Fit after self-cal, rms=0.071999Jy sigma=0.000862 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071999Jy sigma=0.000862 ! Fit after self-cal, rms=0.071905Jy sigma=0.000862 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.636 mas, bmaj=4.786 mas, bpa=16.54 degrees ! Estimated noise=634.268 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000274998 Jy ! Component: 100 - total flux cleaned = -0.000396998 Jy ! Component: 150 - total flux cleaned = -0.000459442 Jy ! Component: 200 - total flux cleaned = -0.000518656 Jy ! Total flux subtracted in 200 components = -0.000518656 Jy ! Clean residual min=-0.001979 max=0.001844 Jy/beam ! Clean residual mean=0.000005 rms=0.000498 Jy/beam ! Combined flux in latest and established models = 0.126263 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 41 components and 0.126263 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071894Jy sigma=0.000862 ! Fit after self-cal, rms=0.071887Jy sigma=0.000862 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.68249e-05 Jy ! Component: 100 - total flux cleaned = -0.000123608 Jy ! Component: 150 - total flux cleaned = -0.000184444 Jy ! Component: 200 - total flux cleaned = -0.000241769 Jy ! Total flux subtracted in 200 components = -0.000241769 Jy ! Clean residual min=-0.002013 max=0.001836 Jy/beam ! Clean residual mean=0.000005 rms=0.000496 Jy/beam ! Combined flux in latest and established models = 0.126021 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 44 components and 0.126021 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071881Jy sigma=0.000862 ! Fit after self-cal, rms=0.071884Jy sigma=0.000862 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071884Jy sigma=0.000862 ! Fit after self-cal, rms=0.071817Jy sigma=0.000862 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.459 mas, bmaj=9.086 mas, bpa=26.94 degrees ! Estimated noise=726.634 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000511535 Jy ! Component: 100 - total flux cleaned = 0.000420483 Jy ! Component: 150 - total flux cleaned = 0.000408059 Jy ! Component: 200 - total flux cleaned = 0.000408613 Jy ! Total flux subtracted in 200 components = 0.000408613 Jy ! Clean residual min=-0.002062 max=0.002118 Jy/beam ! Clean residual mean=0.000010 rms=0.000561 Jy/beam ! Combined flux in latest and established models = 0.12643 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 49 components and 0.12643 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071822Jy sigma=0.000862 ! Fit after self-cal, rms=0.071809Jy sigma=0.000862 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.10555e-05 Jy ! Component: 100 - total flux cleaned = -3.52794e-05 Jy ! Component: 150 - total flux cleaned = -6.15386e-05 Jy ! Component: 200 - total flux cleaned = -6.1378e-05 Jy ! Total flux subtracted in 200 components = -6.1378e-05 Jy ! Clean residual min=-0.002060 max=0.002055 Jy/beam ! Clean residual mean=0.000010 rms=0.000555 Jy/beam ! Combined flux in latest and established models = 0.126369 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 51 components and 0.126369 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071813Jy sigma=0.000862 ! Fit after self-cal, rms=0.071812Jy sigma=0.000862 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.633 mas, bmaj=4.782 mas, bpa=16.54 degrees ! Estimated noise=633.417 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.633 x 4.782 at 16.54 degrees (North through East) ! Clean map min=-0.0018145 max=0.11771 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.774 mas, bmaj=4.101 mas, bpa=37.19 degrees ! Estimated noise=880.467 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.091016 Jy ! Component: 100 - total flux cleaned = 0.112177 Jy ! Component: 150 - total flux cleaned = 0.119521 Jy ! Component: 200 - total flux cleaned = 0.123042 Jy ! Total flux subtracted in 200 components = 0.123042 Jy ! Clean residual min=-0.003002 max=0.002869 Jy/beam ! Clean residual mean=0.000002 rms=0.000694 Jy/beam ! Combined flux in latest and established models = 0.123042 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.123042 Jy ! Inverting map and beam ! Estimated beam: bmin=4.633 mas, bmaj=4.782 mas, bpa=16.54 degrees ! Estimated noise=633.417 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (6, -2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00238766 Jy ! Component: 100 - total flux cleaned = 0.00290819 Jy ! Component: 150 - total flux cleaned = 0.00345671 Jy ! Component: 200 - total flux cleaned = 0.00389126 Jy ! Total flux subtracted in 200 components = 0.00389126 Jy ! Clean residual min=-0.001959 max=0.001721 Jy/beam ! Clean residual mean=0.000005 rms=0.000477 Jy/beam ! Combined flux in latest and established models = 0.126934 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 23 components and 0.126934 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.459 mas, bmaj=9.086 mas, bpa=26.94 degrees ! Estimated noise=726.634 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000244318 Jy ! Component: 100 - total flux cleaned = 0.000378305 Jy ! Component: 150 - total flux cleaned = 0.000423696 Jy ! Component: 200 - total flux cleaned = 0.000435601 Jy ! Total flux subtracted in 200 components = 0.000435601 Jy ! Clean residual min=-0.001971 max=0.001918 Jy/beam ! Clean residual mean=0.000010 rms=0.000531 Jy/beam ! Combined flux in latest and established models = 0.127369 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.23947e-05 Jy ! Component: 100 - total flux cleaned = -2.60261e-06 Jy ! Component: 150 - total flux cleaned = 6.3078e-06 Jy ! Component: 200 - total flux cleaned = 1.48648e-05 Jy ! Total flux subtracted in 200 components = 1.48648e-05 Jy ! Clean residual min=-0.001940 max=0.001936 Jy/beam ! Clean residual mean=0.000011 rms=0.000529 Jy/beam ! Combined flux in latest and established models = 0.127384 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 39 components and 0.127384 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.633 mas, bmaj=4.782 mas, bpa=16.54 degrees ! Estimated noise=633.417 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.49383e-05 Jy ! Component: 100 - total flux cleaned = 4.93752e-05 Jy ! Component: 150 - total flux cleaned = 4.94384e-05 Jy ! Component: 200 - total flux cleaned = 7.09018e-05 Jy ! Total flux subtracted in 200 components = 7.09018e-05 Jy ! Clean residual min=-0.001839 max=0.001669 Jy/beam ! Clean residual mean=0.000005 rms=0.000459 Jy/beam ! Combined flux in latest and established models = 0.127455 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 51 components and 0.127455 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071776Jy sigma=0.000861 ! Fit after self-cal, rms=0.071771Jy sigma=0.000861 wmodel J1458+3720_S_2014_01_04_pus_map.mod ! Writing 51 model components to file: J1458+3720_S_2014_01_04_pus_map.mod wobs J1458+3720_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J1458+3720_S_2014_01_04_pus_uvs.fits wwins J1458+3720_S_2014_01_04_pus_map.win ! wwins: Wrote 2 windows to J1458+3720_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00047186 Jy ! Component: 100 - total flux cleaned = -0.000595278 Jy ! Component: 150 - total flux cleaned = -0.00065424 Jy ! Component: 200 - total flux cleaned = -0.000710072 Jy ! Component: 250 - total flux cleaned = -0.000842917 Jy ! Component: 300 - total flux cleaned = -0.00097144 Jy ! Component: 350 - total flux cleaned = -0.00109607 Jy ! Component: 400 - total flux cleaned = -0.00119305 Jy ! Component: 450 - total flux cleaned = -0.00131116 Jy ! Component: 500 - total flux cleaned = -0.00135719 Jy ! Component: 550 - total flux cleaned = -0.00146944 Jy ! Component: 600 - total flux cleaned = -0.00151236 Jy ! Component: 650 - total flux cleaned = -0.00164128 Jy ! Component: 700 - total flux cleaned = -0.00172541 Jy ! Component: 750 - total flux cleaned = -0.00182851 Jy ! Component: 800 - total flux cleaned = -0.00196977 Jy ! Component: 850 - total flux cleaned = -0.00210786 Jy ! Component: 900 - total flux cleaned = -0.00212718 Jy ! Component: 950 - total flux cleaned = -0.00224135 Jy ! Component: 1000 - total flux cleaned = -0.00226015 Jy ! Component: 1050 - total flux cleaned = -0.00231527 Jy ! Component: 1100 - total flux cleaned = -0.00236921 Jy ! Component: 1150 - total flux cleaned = -0.0024223 Jy ! Component: 1200 - total flux cleaned = -0.00240473 Jy ! Component: 1250 - total flux cleaned = -0.00243894 Jy ! Component: 1300 - total flux cleaned = -0.00245605 Jy ! Component: 1350 - total flux cleaned = -0.00245624 Jy ! Component: 1400 - total flux cleaned = -0.00252232 Jy ! Component: 1450 - total flux cleaned = -0.00250577 Jy ! Component: 1500 - total flux cleaned = -0.0025539 Jy ! Component: 1550 - total flux cleaned = -0.00258568 Jy ! Component: 1600 - total flux cleaned = -0.00261669 Jy ! Component: 1650 - total flux cleaned = -0.00261673 Jy ! Component: 1700 - total flux cleaned = -0.002617 Jy ! Component: 1750 - total flux cleaned = -0.00272222 Jy ! Component: 1800 - total flux cleaned = -0.00269263 Jy ! Component: 1850 - total flux cleaned = -0.0027073 Jy ! Component: 1900 - total flux cleaned = -0.00269293 Jy ! Component: 1950 - total flux cleaned = -0.00276447 Jy ! Component: 2000 - total flux cleaned = -0.00280692 Jy ! Component: 2050 - total flux cleaned = -0.00279327 Jy ! Component: 2100 - total flux cleaned = -0.00283477 Jy ! Component: 2150 - total flux cleaned = -0.00288933 Jy ! Component: 2200 - total flux cleaned = -0.00291621 Jy ! Component: 2250 - total flux cleaned = -0.00290289 Jy ! Component: 2300 - total flux cleaned = -0.00291622 Jy ! Component: 2350 - total flux cleaned = -0.00289027 Jy ! Component: 2400 - total flux cleaned = -0.0029164 Jy ! Component: 2450 - total flux cleaned = -0.00294217 Jy ! Component: 2500 - total flux cleaned = -0.00298015 Jy ! Component: 2550 - total flux cleaned = -0.00300518 Jy ! Component: 2600 - total flux cleaned = -0.00300519 Jy ! Component: 2650 - total flux cleaned = -0.00303001 Jy ! Component: 2700 - total flux cleaned = -0.00304223 Jy ! Component: 2750 - total flux cleaned = -0.00304232 Jy ! Component: 2800 - total flux cleaned = -0.00304235 Jy ! Component: 2850 - total flux cleaned = -0.00309012 Jy ! Component: 2900 - total flux cleaned = -0.00306635 Jy ! Component: 2950 - total flux cleaned = -0.00314854 Jy ! Component: 3000 - total flux cleaned = -0.00312503 Jy ! Component: 3050 - total flux cleaned = -0.00313658 Jy ! Component: 3100 - total flux cleaned = -0.00314813 Jy ! Component: 3150 - total flux cleaned = -0.00314817 Jy ! Component: 3200 - total flux cleaned = -0.00318189 Jy ! Component: 3250 - total flux cleaned = -0.00312609 Jy ! Component: 3300 - total flux cleaned = -0.00314838 Jy ! Component: 3350 - total flux cleaned = -0.00317036 Jy ! Component: 3400 - total flux cleaned = -0.00315934 Jy ! Component: 3450 - total flux cleaned = -0.003181 Jy ! Component: 3500 - total flux cleaned = -0.00319172 Jy ! Component: 3550 - total flux cleaned = -0.00321309 Jy ! Component: 3600 - total flux cleaned = -0.00322367 Jy ! Component: 3650 - total flux cleaned = -0.00325524 Jy ! Component: 3700 - total flux cleaned = -0.00324482 Jy ! Component: 3750 - total flux cleaned = -0.00331769 Jy ! Component: 3800 - total flux cleaned = -0.00332796 Jy ! Component: 3850 - total flux cleaned = -0.00336893 Jy ! Component: 3900 - total flux cleaned = -0.0033587 Jy ! Component: 3950 - total flux cleaned = -0.00335868 Jy ! Component: 4000 - total flux cleaned = -0.00333856 Jy ! Component: 4050 - total flux cleaned = -0.00337857 Jy ! Total flux subtracted in 4096 components = -0.00338845 Jy ! Clean residual min=-0.000603 max=0.000587 Jy/beam ! Clean residual mean=0.000001 rms=0.000170 Jy/beam ! Combined flux in latest and established models = 0.124067 Jy keep ! Adding 241 model components to the UV plane model. ! The established model now contains 292 components and 0.124067 Jy ![Exited script file: muppet] wmap "J1458+3720_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.633 x 4.782 at 16.54 degrees (North through East) ! Clean map min=-0.0012558 max=0.11838 Jy/beam ! Writing clean map to FITS file: J1458+3720_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.118383 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000168153 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.426126 0.426126 0.852252 1.7045 3.40901 6.81801 13.636 27.2721 54.5441 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.118 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.633 x 4.782 at 16.54 degrees (North through East) ! Clean map min=-0.0012558 max=0.11838 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1458+3720_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:30:37 2017